Effect of growth conditions on cell surface hydrophobicity of multiresistant Pseudomonas aeruginosa strains

Bacterial cell surface hydrophobicity (CSH) may promote colonization. The aim of this study was evaluation of the influence of growth conditions and sensitivity to selected antibiotics on hydrophobic properties of multiresistant P. aeruginosa strains by means of salt aggregation test (SAT) and bacterial adhesion to hydrocarbons (BATH). 30 multiresistant P. aeruginosa strains were included in this study. The variables were: microbiological media type (trypticase-soy agar, trypticase-soy agar with 5% sheep blood and trypticase-soy broth), growth temperature (22, 30 and 37 degrees C) and growth time (24 and 48 h). Most of the investigated strains presented hydrophilic properties in both methods. Cultivation in trypticase-soy broth caused statistically relevant decrease of CSH. Growth temperature did not influence CSH. 48 hours of incubation caused statistically relevant drop of the CSH when compared with 24 h incubation. The sensitivity to selected antibiotics did not vary investigated strains, except form cefepime sensitive and intermediate sensitive strains.     

Influence of incubation conditions on cell surface hydrophobicity of Candida species fungi

Cell surface hydrophobicity (CSH) is considered to be one of several virulence factors of Candida yeast-like fungi. The aim of the study was a measurment of hydrophobic properties of Candida sp. depending on growth conditions. A total of 139 strains of Candida (80 - C. albicans and 59 - C. non-albicans) were examined. The method of salt aggregation test (SAT) was used. The strains were cultured on three different media, in two variants of incubation temperature and time. The incubation temperature and microbiological medium affected CSH of just C. albicans strains. The influence of incubation time on CSH of examined species of Candida was not occurred. There was a strong correlation between CSH and species of Candida demonstrated in the study Hydrophobic properties were more frequent and stronger among strains of C. non-albicans than C. albicans species. The results of the study indicates that CSH of Candida spp. is a dynamic feature. The ability to change surface properties may play a role in pathogenesis of candidosis.     

Influence of pressure on growth of Pseudomonas fluorescens

Summary The effect of increased pressure on the growth of the bacterium Pseudomonas fluorescens has been investigated in an airlift-fermenter (10 l) up to 8 bars. It could be established, that increased hydrostatic pressure has a strong effect on the metabolism of the bacterium.     

Biocides incorporated into plasticized polyvinylchloride reduce adhesion of Pseudomonas fluorescens BL146 and substratum hydrophobicity

A quantitative adhesion assay was developed to monitor attachment of Pseudomonas fluorescens BL146 to discs of plasticized polyvinylchloride (pPVC) with and without incorporated biocides. Adherent cells were quantified by radiolabelling with DL-[4,5-³H]leucine. Adhesion reached a maximum after 6 h incubation at an initial cell concentration of 5 x 10⁷ cells ml^-1. The adhesion assay was used to compare bacterial attachment to pPVC containing the biocides 10,10-oxybisphenoxyarsine (OBPA), 2- n -octyl-4-isothiazolin-3-one (OIT), 2,3,5,6-tetrachloro-4-(methylsulphonyl)pyridine (TCMP) and N -trichloromethylthiophthalimide (NCMP) at 0, 250, 750 and 2250 ppm. All four biocides reduced adhesion with increasing concentration, with statistically significant reductions in adhesion (< 53%) occurring with OBPA, OIT and TCMP at 2250 ppm. Significant reductions in adhesion to pPVC containing OBPA were found whether adhering cells were viable or non-viable. The hydrophobicity of the pPVC surfaces was quantified by the measurement of water contact angles using the Wilhelmy plate technique. A trend of reduced hydrophobicity was observed with increasing biocide concentration. Incorporation of all four biocides at 2250 ppm caused statistically significant reductions in contact angle from 104.7° to a minimum of 93.5°. Incorporation of biocides into pPVC therefore concurrently reduces both bacterial adhesion and surface hydrophobicity.     

Influence of culture conditions on cell surface hydrophobicity of rods of genus Serratia

The cell surface hydrophobicity (CSH) is a non-specific adhesion factor that is important in the proliferation of microorganisms on solid surfaces. Serratia spp. is a bacterium that has been increasingly implicated as a primary pathogen in numerous human infections, particularly in urinary tract infections. CSH of 60 Serratia spp. strains isolated from clinical materials was evaluated using the ammonium sulfate salt aggregation test. Bacteria were grown for 24 h and 48 h at room temperature (22 degrees C) and 37 degrees C on enrichment broth and agar (Biomed), enrichment agar with 5% human blood and medium composed of agar granulated (Becton Dickinson), neopeptone (Difco) and 1% (v/v) glycerol. CSH was estimated most frequently when the analyzed strains in enrichment broth were cultured. When grown in enrichment broth cells of Serratia spp. at room temperature were more hydrophobic (43% after 24 h and 47% after 48 h) than those at 37 degrees C (30% after 24 h and 33% after 48 h). CSH of the examined Serratia spp. strains were depended on the temperature, time of the culture of bacteria and the kind of media. The influence of the culture conditions on the changes in CSH of the analyzed bacteria may suggest significance of these properties in the pathogenesis of Serratia spp.     

Kinetics of Pseudomonas fluorescens growth under different conditions of culturing

The dynamics of Pseudomonas fluorescens VKM-1472 growth was studied under the conditions of batch and continuous cultivation, and the behaviour of the organism was investigated upon nutrition shifts and starvation. At D greater than 0.375 h-1, just as in the batch culture with a substrate excess, the strain realised excessive metabolism [15]: the yield in terms of the substrate fell down (38% for the batch culture and 40% for the continuous culture), the titre of viable cells decreased to a considerable extent, and maintenance expenditures increased (3 times for qgluc and 7.5 times for qO2). When the culture was incubated under the oligotrophous conditions, the biomass yield decreased fourfold within 8 days and the titre of viable cells dropped down twofold within the same period of time. However, the organism was still capable of oxidising a wide range of substrates (17 substrates were studied). As soon as a substrate was added, it was oxidised at a high rate and changes in the macromolecular composition were characteristic of an "up-jump" in the growth rate [11]. It is possible that the growth and behaviour of this organism are associated with its ecological niche occupied in natural systems.     

Extracellular factors affecting the adhesion of Pseudomonas fluorescens cells to glass surface

Two factors affecting the adhesion of Pseudomonas fluorescens to glass surfaces were revealed in the culture liquid (CL) of this bacterium. One of these factors, adhesin, which is responsible for cell adhesion, was found to be a protein substance located both at the cell surface and in the CL. Bacterial cells grown in rich LB medium were less adhesive than cells grown in minimal M9 medium. The adhesive capacity of cells was independent of the growth phase. The other factor, anti-adhesion (AA), which reduces cell adhesion, was found only in the CL. AA concentration in the CL increased with the culture age.     

Influence of different growth conditions on the survival and the efficacy of freeze-dried Pseudomonas fluorescens strain Pf153

High viability, storability and tolerance to variable environmental conditions are key factors in the development of microbial biological control agents (BCAs). The efficacy of microbial BCAs is influenced by the culture conditions and formulation process. Therefore, we investigated the influence of diverse growth conditions on the survival during freeze-drying and on the biocontrol efficacy of Pseudomonas fluorescens strain Pf153. Culture time, temperature and media, mild heat shock and pH change influenced the bacterium viability after freeze-drying. The best survival rate was reached by cultivation in King’s broth for 16 or 20 h. Growth temperatures of 25 and 30°C and a mild heat shock at 35°C for one hour influenced the survival rate positively. In all bioassays against Botrytis cinerea on Vicia faba leaves, Pf153 showed a significant increased efficacy compared to the untreated control. No differences of the efficacy between fresh and freeze-dried cells were observed. Furthermore, a growth temperature of 20°C increased the efficacy of Pf153 against B. cinerea. These results underline that the quality of the formulated product can be improved by manipulating the fermentation process.     

Kinetics of Pseudomonas aeruginosa adhesion to 304 and 316-L stainless steel: role of cell surface hydrophobicity.

Fifteen different isolates of Pseudomonas aeruginosa were used to study the kinetics of adhesion to 304 and 316-L stainless steel. Stainless steel plates were incubated with approximately 1.5 X 10(7) CFU/ml in 0.01 M phosphate-buffered saline (pH 7.4). After the plates were rinsed with the buffer, the number of adhering bacteria was determined by a bioluminescence assay. Measurable adhesion, even to the electropolished surfaces, occurred within 30 s. Bacterial cell surface hydrophobicity, as determined by the bacterial adherence to hydrocarbons test and the contact angle measurement test, was the major parameter influencing the adhesion rate constant for the first 30 min of adhesion. A parabolic relationship between the CAM values and the logarithm of the adhesion rate constants (In k) was established. No correlation between either the salt aggregation or the improved salt aggregation values and the bacterial adhesion rate constants could be found. Since there was no significant correlation between the bacterial electrophoretic mobilities and the In k values, the bacterial cell surface charge seemed of minor importance in the process of adhesion of P. aeruginosa to 304 and 316-L stainless steel.     

Listeria monocytogenes Scott A: cell surface charge, hydrophobicity, and electron donor and acceptor characteristics under different environmental growth conditions

We determined the variations in the surface physicochemical properties of Listeria monocytogenes Scott A cells that occurred under various environmental conditions. The surface charges, the hydrophobicities, and the electron donor and acceptor characteristics of L. monocytogenes Scott A cells were compared after the organism was grown in different growth media and at different temperatures; to do this, we used microelectrophoresis and the microbial adhesion to solvents method. Supplementing the growth media with glucose or lactic acid affected the electrical, hydrophobic, and electron donor and acceptor properties of the cells, whereas the growth temperature (37, 20, 15, or 8 degrees C) primarily affected the electrical and electron donor and acceptor properties. The nonlinear effects of the growth temperature on the physicochemical properties of the cells were similar for cells cultivated in two different growth media, but bacteria cultivated in Trypticase soy broth supplemented with 6 g of yeast extract per liter (TSYE) were slightly more hydrophobic than cells cultivated in brain heart infusion medium (P < 0.05). Adhesion experiments conducted with L. monocytogenes Scott A cells cultivated in TSYE at 37, 20, 15, and 8 degrees C and then suspended in a sodium chloride solution (1.5 x 10(-1) or 1.5 x 10(-3) M NaCl) confirmed that the cell surface charge and the electron donor and acceptor properties of the cells had an influence on their attachment to stainless steel.     

MATH法表征环境微生物细胞表面疏水性的研究进展

环境微生物的细胞表面疏水性对其生长代谢过程以及在环境领域的应用效率具有重要影响。目前用于测试细胞表面疏水性最常用的方法是碳氢吸附能力(Microbial adhesion to hydrocarbons,MATH),该方法因具有操作简便、有一定的准确度等优点在环境、生物工程、医学、食品等领域应用广泛。本文综述了MATH法在环境微生物领域中的污泥絮体性能表征、有机物降解、膜污染和破乳方面的应用,同时介绍了MATH法在实验操作、计数方法和数据分析方面的优化。最后展望了该方法今后的研究方向。     

Effects of cell surface damage on surface properties and adhesion of Pseudomonas aeruginosa

Bacterial cell surfaces play a crucial role in their adhesion to surfaces. In the present study, physico-chemical cell surface properties of Pseudomonas aeruginosa, isolated from a case of contact lens associated keratitis, are determined for mid-exponential and early stationary phase cells and for cells after exposure to a lens care solution or after mechanical damage by sonication. Exposure to a lens care solution and mechanical cell surface damage reduced the cell surface hydrophobicity and water contact angles decreased from 129 degrees to 96 degrees and 83 degrees, respectively. Zeta potentials in saline (-9 mV) were hardly affected after mechanical damage, but tri-modal zeta potential distributions, with subpopulation zeta potentials at -11, -28 and -41 mV, were observed after exposure of bacteria to a lens care solution. X-ray photoelectron spectroscopy indicated changes in the amounts of oxygen-, nitrogen- and phosphorus-rich cell surface components. Mid-exponential phase cells had more nitrogen-rich cell surface components than early stationary phase cells, but water contact angles and zeta potentials were not very different. In addition, mid-exponential phase cells adhered better than early stationary phase cells to hydrophobic and hydrophilic substrata in a parallel plate flow chamber. The capacity of P. aeruginosa to adhere was decreased after inflicting cell surface damage. Exposure to a lens care solution yielded a larger reduction in adhesion capacity than sonication, likely because sonication left most of the cells in a viable state, in contrast to exposure to a lens care solution. It is argued that for clinically relevant experiments, it may be preferable to work with surface damaged cells rather than with gently harvested organisms.     

Variation in adhesion and cell surface hydrophobicity in Candida albicans white and opaque phenotypes

A previous study had established that a select group of pathogenic isolates of Candida albicans was capable of switching heritably, reversibly and at a high frequency (10^–2 to 10^–3) between two phenotypes (white or opaque) readily distinguishable by the size, shape, and color of colonies formed on agar at 25°C. This paper describes experiments designed to determine the ability of these two phenotypes to attach to buccal epithelial cells (BECs) and plastic, and to compare the cell surface hydrophobicities of white and opaque phenotypes from three clinical isolates. White cells were found to be significantly more adhesive to BECs, and a strong correlation was also found between phenotype adhesiveness and the percentage of BECs to which C. albicans had attached. The percentage of BECs with one or more attached C. albicans was approximately 90% for the white phenotype and approximately 50% for the opaque phenotype. Opaque cells, in contrast, were twice as hydrophobic as white cells, and the percentage of opaque cells bound to BECs by coadhesion was also double that of white cells. The differences in adhesion to plastic between the two phenotypes were not statistically significant and there was no distinct trend to suggest which phenotype might be more adhesive to plastic. These results indicate that several factors are involved in the adhesion of C. albicans to plastic, and confirm the hypothesis that cell surface hydrophobicity is of minor importance in direct adhesion to epithelial cells but that it may contribute to indirect attachment to epithelial cells by promoting yeast coadhesion. Moreover, the data presented in this paper also revealed that under identical growth conditions, adhesion of C. albicans was significantly altered depending on the phenotypic state of the organism tested. Therefore, because C. albicans can switch at a high frequency to various phenotypes in vitro, it may be that in future adhesion studies involving Candida the phenotypic state of the organism at the time of testing will have to be determined. Otherwise, the results, even within the same laboratory, may be difficult to interpret.     

Influence of Temperature on Substrate and Energy Conversion in Pseudomonas fluorescens

The influence of temperature on yield, maintenance rate, growth rate, and conversion of calories to biomass was studied with Pseudomonas fluorescens grown in a chemostat. Maintenance and growth rate are influenced linearly with temperature. Both rates increased with increasing temperature and gave linear Arrhenius plots over a limited range. Cells harvested during the steady-state at each temperature were burned in a microcalorimeter. The number of kilocalories per gram (dry weight) of organism was not influenced significantly by the temperature during growth, indicating that the conversion of substrate calories into biomass is apparently regulated in the range of temperature studied.     

Extracellular protease as a reversible adhesion regulator in Pseudomonas fluorescens

The investigation of growth dynamics and protein content in a batch Pseudomonas fluorescens culture grown in a synthetic medium with glucose as the sole source of carbon and energy showed that cells reversibly adhere to the walls of the cultivation flask during the first 2-3 h of growth. Over this time period, the total protein content of free and bound cells increased exponentially at a rate of 0.25 h-1, the fraction of proteins in cells being almost the same (60-70%). The protein content in the medium increased from 3 to 50 mg/l, reaching about 30% of the total protein of the culture. The addition of the exponential culture liquid filtrate to the medium together with the inoculum led to the complete inhibition of cell adhesion and a drastic activation of proteolysis, with a concurrent release of more than 80% of cellular proteins into the medium. After 3-5 h of growth, the concentration of extracellular proteins decreased to the control level. Exogenously added proteinase K inhibited cell adhesion, the effect being more pronounced for R-type than for S-type cells. The hypothesis is discussed that the short-term reversible adhesion of cells is regulated with the involvement of a mixture of hydrocarbons, which inactivate the functional activity of bacterial adhesins, and proteases, which digest these adhesins.     

Role of flagella in adhesion of Pseudomonas fluorescens to tendon slices

Tendon slices were used as model surfaces to investigate the role of flagella in the adhesion of Pseudomonas fluorescens to meat. The slices were introduced into a specially designed flow chamber, which was then filled with a suspension of the organism, and the tendon surface was observed at a x640 magnification. The same events that occur during the colonization of glass surfaces (apical adhesion of cells with rotation around the contact point, longitudinal adhesion, detachment of apically and longitudinally adherent cells) were also observed on tendon. Mechanical removal of the flagella resulted in no change in the contact angles with 0.1 M saline or alpha-bromonaphthalene, in the electrophoretic mobility, or in the adhesion of the organism to hydrophobic and ion-exchange resins. In addition, cells from which flagella had been mechanically removed still adhered extensively to tendon. Nevertheless, under comparable conditions (bacterial concentration, contact time), flagellated cells adhered to tendon in larger numbers than did deflagellated cells. This was entirely due to the ability of the motile flagellated cells to reach tendon in greater numbers than deflagellated cells.     

Role of distant cellular communications in regulation of Pseudomonas fluorescens adhesion

The effects of long-range interactions (LRI) and culture air on the adhesion of Pseudomonas fluorescens cells were studied. One P. fluorescens culture was found to diminish the adhesion of cells of another, glass-screened, P. fluorescens culture by 30%. This effect was interpreted to be due to penetrating LRI. Under the combined action of LRI and culture air (the latter alone reduced cell adhesion by only several percent), the amount of unattached cells increased 2- to 30-fold (on the average, by a factor of nine). Such a great reduction of cell adhesion indicated the synergistic action of LRI and culture air.     

Lactobacillus acidophilus La5 and Bifidobacterium lactis Bb12 cell surface hydrophobicity and survival of the cells under adverse environmental conditions

Changes in the cell surface hydrophobicity (CSH) of probiotic bacteria Lactobacillus acidophilus La5 and Bifidobacterium lactis Bb12 and the survival of these cells were examined in response to varied cultivation conditions and adverse environmental conditions. An inverse linear relationship (P < 0.01) was detected between the CSH of intact L. acidophilus La5 and B. lactis Bb12 and survival of cells subjected to subsequent freezing/thawing, long-term storage or exposure to mineral and bile acids. The observed relationships were supported by significant correlations between the CSH and changes in composition of the cell envelopes (proteins, lipids and carbohydrates) of L. acidophilus La5 and B. lactis Bb12 examined using FT-IR spectroscopy and conventional biochemical analysis methods. The results also suggest that the estimates of hydrophobicity, being a generalized characteristic of cell surfaces, are important parameters to predict the ability of intact probiotic bacteria to endure extreme environments and therefore should be monitored during cultivation. A defined balance of cell components, which can be characterized by the reduced CSH values, apparently helps to ensure the resistance, improved viability and hence the overall probiotic properties of bacteria.