Monovalent ion-mediated folding of the Tetrahymena thermophila ribozyme

The time-course of monovalent cation-induced folding of the L-21 Sca1 Tetrahymena thermophila ribozyme and a selected mutant was quantitatively followed using synchrotron X-ray (.OH) footprinting. Initiating folding by increasing the concentration of either Na+ or K+ to 1.5M from an initial condition of approximately 0.008 M Na+ at 42 degrees C resulted in the complete formation of tertiary contacts within the P5abc subdomain and between the peripheral helices within the dead time of our measurements (k>50 s(-1)). These results contrast with folding rates of 2-0.2 s(-1) previously observed for formation of these contacts in 10mM Mg2+ from the same initial condition. Thus, the initial formation of native tertiary contacts is inhibited by divalent but not monovalent cations. The native contacts within the catalytic core form without a detectable burst phase at rates of 0.4-1.0 s(-1) in a manner reminiscent of the Mg2+-dependent folding behavior, although tenfold faster. The tertiary interactions stabilizing the catalytic core interaction with P4-P6 and P2.1, as well as one of the protections internal for the P4-P6 domain, display progress curves with appreciable burst amplitudes and a phase comparable in rate to that of the catalytic core. That the slow folding of the ribozyme's core is a consequence of the alt-P3 secondary structure is shown by the 100% burst phase amplitudes that are observed for folding of the U273A mutant ribozyme within which the native secondary structure (P3) is strengthened. Thus, formation of a misfolded intermediate(s) resulting from the alt-P3 secondary structure is independent of ion valency while the rate at which the respective intermediates are resolved is sensitive to ion valency. The overall portrait painted by these results is that ion valency differentially affects steps in the folding process and that folding in monovalent ion alone for the U273A mutant Tetrahymena ribozyme is fast and direct.     

Two major tertiary folding transitions of the Tetrahymena catalytic RNA.

The L-21 Tetrahymena ribozyme, an RNA molecule with sequence-specific endoribonuclease activity derived from a self-splicing group I intron, provides a model system for studying the RNA folding problem. A 160 nucleotide, independently folding domain of tertiary structure (the P4-P6 domain) comprises about half of the ribozyme. We now apply Fe(II)-EDTA cleavage to mutants of the ribozyme to explore the role of individual structural elements in tertiary folding of the RNA at equilibrium. Deletion of peripheral elements near the 3' end of the ribozyme destabilizes a region of the catalytic core (P3-P7) without altering the folding of the P4-P6 domain. Three different mutations within the P4-P6 domain that destabilize its folding also shift the folding of the P3-P7 region of the catalytic core to higher MgCl2 concentrations. We conclude that the role of the extended P4-P6 domain and of the 3'-terminal peripheral elements is at least in part to stabilize the catalytic core. The organization of RNA into independently folding domains of tertiary structure may be common in large RNAs, including ribosomal RNAs. Furthermore, the observation of domain-domain interactions in a catalytic RNA supports the feasibility of a primitive spliceosome without any proteins.     

Perturbed folding kinetics of circularly permuted RNAs with altered topology

The folding pathway of the Tetrahymena ribozyme correlates inversely with the sequence distance between native interactions, or contact order. The rapidly folding P4-P6 domain has a low contact order, while the slowly folding P3-P7 region has a high contact order. To examine the role of topology and contact order in RNA folding, we screened for circular permutants of the ribozyme that retain catalytic activity. Permutants beginning in the P4-P6 domain fold 5 to 20 times more slowly than the wild-type ribozyme. By contrast, 50% of a permuted RNA that disjoins a non-native interaction in P3 folds tenfold faster than the wild-type ribozyme. Hence, the probability of rapidly folding to the native state depends on the topology of tertiary domains.     

Concordant exploration of the kinetics of RNA folding from global and local perspectives

Time-resolved small-angle X-ray scattering (SAXS) with millisecond time-resolution reveals two discrete phases of global compaction upon Mg2+-mediated folding of the Tetrahymena thermophila ribozyme. Electrostatic relaxation of the RNA occurs rapidly and dominates the first phase of compaction during which the observed radius of gyration (R(g)) decreases from 75 angstroms to 55 angstroms. A further decrease in R(g) to 45 angstroms occurs in a well-defined second phase. An analysis of mutant ribozymes shows that the latter phase depends upon the formation of long-range tertiary contacts within the P4-P6 domain of the ribozyme; disruption of the three remaining long-range contacts linking the peripheral helices has no effect on the 55-45 angstroms compaction transition. A better understanding of the role of specific tertiary contacts in compaction was obtained by concordant time-resolved hydroxyl radical (OH) analyses that report local changes in the solvent accessibility of the RNA backbone. Comparison of the global and local measures of folding shows that formation of a subset of native tertiary contacts (i.e. those defining the ribozyme core) can occur within a highly compact ensemble whose R(g) is close to that of the fully folded ribozyme. Analyses of additional ribozyme mutants and reaction conditions establish the generality of the rapid formation of a partially collapsed state with little to no detectable tertiary structure. These studies directly link global RNA compaction with formation of tertiary structure as the molecule acquires its biologically active structure, and underscore the strong dependence on salt of both local and global measures of folding kinetics.     

Multiple monovalent ion-dependent pathways for the folding of the L-21 Tetrahymena thermophila ribozyme

Synchrotron hydroxyl radical (*OH) footprinting is a technique that monitors the local changes in solvent accessibility of the RNA backbone on milliseconds to minutes time-scales. The Mg(2+)-dependent folding of the L-21 Sca 1 Tetrahymena thermophila ribozyme has been followed using this technique at an elevated concentration of monovalent ion (200 mM NaCl) and as a function of the initial annealing conditions and substrate. Previous studies conducted at low concentrations of monovalent ion displayed sequential folding of the P4-P6 domain, the peripheral helices and the catalytic core, with each protection displaying monophasic kinetics. For ribozyme annealed in buffer containing 200 mM NaCl and folded by the addition of 10 mM MgCl(2), multiple kinetic phases are observed for *OH protections throughout the ribozyme. The independently folding P4-P6 domain is the first to fold with its protections displaying 50-90% burst phase amplitudes. That the folding of P4-P6 within the ribozyme does not display the 100% burst phase of isolated P4-P6 at 200 mM NaCl shows that interactions with the remainder of the ribozyme impede this domain's folding. In addition, *OH protections constituting each side of a tertiary contact are not coincident in some cases, consistent with the formation of transient non-native interactions. While the peripheral contacts and triple helical scaffold exhibit substantial burst phases, the slowest protection to appear is J8/7 in the catalytic core, which displays a minimal burst amplitude and whose formation is coincident with the recovery of catalytic activity. The number of kinetic phases as well as their amplitudes and rates are different when the ribozyme is annealed in low-salt buffer and folded by the concomitant addition of monovalent and divalent cations. Annealed substrate changes the partitioning of the ribozyme among the multiple folding populations. These results provide a map of the early steps in the ribozyme's folding landscape and the degree to which the preferred pathways are dependent upon the initial reaction conditions.     

Folding mechanism of the Tetrahymena ribozyme P4-P6 domain

Synchrotron X-ray-dependent hydroxyl radical footprinting was used to probe the folding kinetics of the P4-P6 domain of the Tetrahymena group I ribozyme, which forms a stable, closely packed tertiary structure. The 160-nt domain folds independently at a similar rate (approximately 2 s(-1)) as it does in the ribozyme, when folding is measured in 10 mM sodium cacodylate and 10 mM MgCl(2). Surprisingly, tertiary interactions around a three-helix junction (P5abc) within the P4-P6 domain fold at least 25 times more rapidly (k >/= 50 s(-1)) in isolation, than when part of the wild-type P4-P6 RNA. This difference implies that long-range interactions in the P4-P6 domain can interfere with folding of P5abc. P4-P6 was observed to fold much faster at higher ionic strength than in 10 mM sodium cacodylate. Analytical centrifugation was used to measure the sedimentation and diffusion coefficients of the unfolded RNA. The hydrodynamic radius of the RNA decreased from 58 to 46 A over the range of 0-100 mM NaCl. We propose that at low ionic strength, the addition of Mg(2+) causes the domain to collapse to a compact intermediate where P5abc is trapped in a non-native structure. At high ionic strength, the RNA rapidly collapses to the native structure. Faster folding most likely results from a different average initial conformation of the RNA in higher salt conditions.     

Principles of RNA compaction: insights from the equilibrium folding pathway of the P4-P6 RNA domain in monovalent cations

Counterions are required for RNA folding, and divalent metal ions such as Mg(2+) are often critical. To dissect the role of counterions, we have compared global and local folding of wild-type and mutant variants of P4-P6 RNA derived from the Tetrahymena group I ribozyme in monovalent and in divalent metal ions. A remarkably simple picture of the folding thermodynamics emerges. The equilibrium folding pathway in monovalent ions displays two phases. In the first phase, RNA molecules that are initially in an extended conformation enforced by charge-charge repulsion are relaxed by electrostatic screening to a state with increased flexibility but without formation of long-range tertiary contacts. At higher concentrations of monovalent ions, a state that is nearly identical to the native folded state in the presence of Mg(2+) is formed, with tertiary contacts that involve base and backbone interactions but without the subset of interactions that involve specific divalent metal ion-binding sites. The folding model derived from these and previous results provides a robust framework for understanding the equilibrium and kinetic folding of RNA.     

An early transition state for folding of the P4-P6 RNA domain

Tertiary folding of the 160-nt P4-P6 domain of the Tetrahymena group I intron RNA involves burying of substantial surface area, providing a model for the folding of other large RNA domains involved in catalysis. Stopped-flow fluorescence was used to monitor the Mg2+-induced tertiary folding of pyrene-labeled P4-P6. At 35 degrees C with [Mg2+] approximately 10 mM, P4-P6 folds on the tens of milliseconds timescale with k(obs) = 15-31 s(-1). From these values, an activation free energy deltaG(double dagger) of approximately 8-16 kcal/mol is calculated, where the large range for deltaG(double dagger) arises from uncertainty in the pre-exponential factor relating k(obs) and delta G(double dagger). The folding rates of six mutant P4-P6 RNAs were measured and found to be similar to that of the wild-type RNA, in spite of significant thermodynamic destabilization or stabilization. The ratios of the kinetic and thermodynamic free energy changes phi = delta deltaG(double dagger)/delta deltaG(o') are approximately 0, implying a folding transition state in which most of the native-state tertiary contacts are not yet formed (an early folding transition state). The k(obs) depends on the Mg2+ concentration, and the initial slope of k(obs) versus [Mg2+] suggests that only approximately 1 Mg2+ ion is bound in the rate-limiting folding step. This is consistent with an early folding transition state, because folded P4-P6 binds many Mg2+ ions. The observation of a substantial deltaG(double dagger) despite an early folding transition state suggests that a simple two-state folding diagram for Mg2+-induced P4-P6 folding is incomplete. Our kinetic data are some of the first to provide quantitative values for an activation barrier and location of a transition state for tertiary folding of an RNA domain.     

RNA tertiary interactions mediate native collapse of a bacterial group I ribozyme

Large RNAs collapse into compact intermediates in the presence of counterions before folding to the native state. We previously found that collapse of a bacterial group I ribozyme correlates with the formation of helices within the ribozyme core, but occurs at Mg2+ concentrations too low to support stable tertiary structure and catalytic activity. Here, using small-angle X-ray scattering, we show that Mg2+-induced collapse is a cooperative folding transition that can be fit by a two-state model. The Mg2+ dependence of collapse is similar to the Mg2+ dependence of helix assembly measured by partial ribonuclease T1 digestion and of an unfolding transition measured by UV hypochromicity. The correspondence between multiple probes of RNA structure further supports a two-state model. A mutation that disrupts tertiary contacts between the L9 tetraloop and its helical receptor destabilized the compact state by 0.8 kcal/mol, while mutations in the central triplex were less destabilizing. These results show that native tertiary interactions stabilize the compact folding intermediates under conditions in which the RNA backbone remains accessible to solvent.     

The GAAA tetraloop-receptor interaction contributes differentially to folding thermodynamics and kinetics for the P4-P6 RNA domain

Tetraloops with the generic sequence GNRA are commonly found in RNA secondary structure, and interactions of such tetraloops with "receptors" elsewhere in RNA play important roles in RNA structure and folding. However, the contributions of tetraloop-receptor interactions specifically to the kinetics of RNA tertiary folding, rather than the thermodynamics of maintaining tertiary structure once folded, have not been reported. Here we investigate the role of the key GAAA tetraloop-receptor motif in folding of the P4-P6 domain of the Tetrahymena group I intron RNA. Insertions of one or more nucleotides into the tetraloop significantly disrupt the thermodynamics of tertiary folding; single-nucleotide insertions shift the folding free energy by 2-4 kcal/mol (DeltaDeltaG(o)'). The folding kinetics of several modified P4-P6 domains were determined by stopped-flow fluorescence spectroscopy, using an internally incorporated pyrene residue as the chromophore. In contrast to the thermodynamic results, the kinetics of Mg(2+)-induced folding were barely affected by the tetraloop modifications, with a DeltaDeltaG(++) of 0.2-0.4 kcal/mol and a Phi value (ratio of the kinetic and thermodynamic contributions) of <0.1. These data indicate an early transition state for folding of P4-P6 with respect to forming the tetraloop-receptor contact, consistent with previous results for modifications elsewhere in P4-P6. We conclude that the GAAA tetraloop-receptor motif contributes little to the stabilization of the transition state for Mg(2+)-induced P4-P6 folding. Rather, the tetraloop-receptor motif acts to clamp the RNA once folding has occurred. This is the first report to correlate the kinetic and thermodynamic contributions of an important RNA tertiary motif, the GNRA tetraloop-receptor. The results are related to possible models for the Mg(2+)-induced folding of the P4-P6 RNA, including a model invoking rapid nonspecific electrostatic collapse.     

Monitoring intermediate folding states of the td group I intron in vivo

Group I introns consist of two major structural domains, the P4-P6 and P3-P9 domains, which assemble through interactions with peripheral extensions to fold into an active ribozyme. To assess group I intron folding in vivo, we probed the structure of td wild-type and mutant introns using dimethyl sulfate. The results suggest that the majority of the intron population is in the native state in accordance with the current structural model, which was refined to include two novel tertiary contacts. The importance of the loop E motif in the P7.1-P7.2 extension in assisting ribozyme folding was deduced from modeling and mutational analyses. Destabilization of stem P6 results in a deficiency in tertiary structure formation in both major domains, while weakening of stem P7 only interferes with folding of the P3-P9 domain. The different impact of mutations on the tertiary structure suggests that they interfere with folding at different stages. These results provide a first insight into the structure of folding intermediates and suggest a putative order of events in a hierarchical folding pathway in vivo.     

In vitro selection of RNAs with increased tertiary structure stability.

An in vitro selection system was devised to select RNAs based on their tertiary structural stability, independent of RNA activity. Selection studies were conducted on the P4-P6 domain from the Tetrahymena thermophila group I intron, an autonomous self-folding unit that contains several important tertiary folding motifs including the tetraloop receptor and the A-rich bulge. Partially randomized P4-P6 molecules were selected based on their ability to fold into compact structures using native gel electrophoresis in the presence of decreasing concentrations of MgCl2. After 10 rounds of the selection process, a number of sequence alterations were identified that stabilized the P4-P6 RNA. One of these, a single base deletion of C209 within the P4 helix, significantly stabilized the P4-P6 molecule and would not have been identified by an activity-based selection because of its essential role for ribozyme function. Additionally, the sequence analysis provided evidence that stabilization of secondary structure may contribute to overall tertiary stability for RNAs. This system for probing RNA structure irrespective of RNA activity allows analysis of RNA structure/function relationships by identifying nucleotides or motifs important for folding and then comparing them with RNA sequences required for function.     

Communication between RNA folding domains revealed by folding of circularly permuted ribozymes

To study the role of sequence and topology in RNA folding, we determined the kinetic folding pathways of two circularly permuted variants of the Tetrahymena group I ribozyme, using time-resolved hydroxyl radical footprinting. Circular permutation changes the distance between interacting residues in the primary sequence, without changing the native structure of the RNA. In the natural ribozyme, tertiary interactions in the P4-P6 domain form in 1 s, while interactions in the P3-P9 form in 1-3 min at 42 degrees C. Permutation of the 5' end to G111 in the P4 helix allowed the stable P4-P6 domain to fold in 200 ms at 30 degrees C, five times faster than in the wild-type RNA, while the other domains folded five times more slowly (5-8 min). By contrast, circular permutation of the 5' end to G303 in J8/7 decreased the folding rate of the P4-P6 domain. In this permuted RNA, regions joining P2, P3 and P4 were protected in 500 ms, while the P3-P9 domain was 60-80% folded within 30 s. RNase T(1) digestion and FMN photocleavage showed that circular permutation of the RNA sequence alters the initial ensemble of secondary structures, thereby changing the tertiary folding pathways. Our results show that the natural 5'-to-3' order of the structural domains in group I ribozymes optimizes structural communication between tertiary domains and promotes self-assembly of the catalytic center.     

A deteriorated triple-helical scaffold accelerates formation of the Tetrahymena ribozyme active structure

The Tetrahymena group I ribozyme requires a hierarchical folding process to form its correct three-dimensional structure. Ribozyme activity depends on the catalytic core consisting of two domains, P4-P6 and P3-P7, connected by a triple-helical scaffold. The folding proceeds in the following order: (i) fast folding of the P4-P6 domain, (ii) slow folding of the P3-P7 domain, and (iii) structure rearrangement to form the active ribozyme structure. The third step is believed to directly determine the conformation of the active catalytic domain, but as yet the precise mechanisms remain to be elucidated. To investigate the folding kinetics of this step, we analyzed mutant ribozymes having base substitution(s) in the triple-helical scaffold and found that disruption of the scaffold at A105G results in modest slowing of the P3-P7 folding (1.9-fold) and acceleration of step (iii) by 5.9-fold. These results suggest that disruption or destabilization of the scaffold is a normal component in the formation process of the active structure of the wild type ribozyme.     

An RNA internal loop acts as a hinge to facilitate ribozyme folding and catalysis.

RNA molecules commonly consist of helical regions separated by internal loops, and in many cases these internal loops have been found to assume stable structures. We have examined the function and dynamics of an internal loop, J5/5a, that joins the two halves of the P4-P6 domain of the Tetrahymena self-splicing group I intron. P4-P6 RNAs with mutations in the J5/5a region showed nondenaturing gel electrophoretic mobilities and levels of Fe(II)-EDTA cleavage protection intermediate between those of wild-type RNA and a mutant incapable of folding into the native P4-P6 tertiary structure. Mutants with the least structured J5/5a loops behaved the most like wild-type P4-P6, and required smaller amounts of Mg2+ to rescue folding. The activity of reconstituted introns containing mutant P4-P6 RNAs correlated similarly with the nature of the J5/5a mutation. Our results suggest that, in solution, the P4-P6 RNA is in a two-state equilibrium between folded and unfolded states. We conclude that this internal loop mainly acts as a flexible hinge, allowing the coaxially stacked helical regions on either side of it to interact via specific tertiary contacts. To a lesser extent, the specific bases within the loop contribute to folding. Furthermore, it is crucial that the junction remain unstructured in the unfolded state. These conclusions cannot be derived from a simple examination of the P4-P6 crystal structure (Cate JH et al., 1996, Science 273:1678-1685), showing once again that structure determination must be supplemented with mutational and thermodynamic analysis to provide a complete picture of a folded macromolecule.     

Linkage of monovalent and divalent ion binding in the folding of the P4-P6 domain of the Tetrahymena ribozyme

We have explored the linkage of monovalent and divalent ion binding in the folding of the P4-P6 domain of Tetrahymena thermophila ribozyme by examining the Mg2+-induced folding and the urea-induced denaturation of the folded state as a function of Na+ under equilibrium folding conditions using hydroxyl radical footprinting. These studies allowed a thermodynamic examination of eight discrete protection sites within P4-P6 that are involved in several tertiary structure contacts. Monovalent ions compete with Mg2+ ions in mediating P4-P6 folding. The urea denaturation isotherms demonstrated DeltaDeltaG values of >2 kcal x mol(-1) in experiments conducted in 10 versus 200 mM NaCl at a constant 10 mM MgCl2. However, the individual-site isotherms reported by footprinting revealed that larger than average changes in DeltaG values were localized to specific sites within the Mg2+-rich A-bulge. The competitive effects of monovalent ions were less when K+ rather than Na+ was the monovalent cation present. This result indicates the importance of the specific K+ binding sites that are associated with AA-platform structures to P4-P6 folding and stability. These site-specific footprinting data provide quantitative and site-specific measurements of the ion-linked stability for P4-P6 that are interpreted with respect to crystallographic data.     

Role of a conserved J8/7 X P4 base-triple in the Tetrahymena ribozyme

The Tetrahymena group I intron ribozyme folds into a complex three dimensional structure for performing the self-splicing reaction. Catalysis depends on its core structure comprising two helical domains, P4-P6 and P3-P7. The two domains are joined by three sets of conserved base-triple(s) and other tertiary interactions. We found that the disruption of J8/7 X P4, one such conserved base-triple, causes the catalytic ability to deteriorate without altering the folding rate. This suggests that the base-triple stabilizes the active structure of the ribozyme but plays no significant role in RNA folding. By combining the present and previous results, it can be concluded that three sets of conserved base-triples play distinct roles in the Tetrahymena ribozyme.     

Modular construction of a tertiary RNA structure: the specificity domain of the Bacillus subtilis RNase P RNA

The structure of the specificity domain (S-domain) of the Bacillus subtilis RNase P RNA has been proposed to be composed of a core and a buttress module, analogous to the bipartite structure of the P4-P6 domain of the Tetrahymena group I ribozyme. The core module is the functional unit of the S-domain and contains the binding site for the T stem-loop of a tRNA. The buttress module provides structural stability to the core module and consists of a GA3 tetraloop and its receptor. To explicitly test the hypothesis that modular construction can describe the structure of the S-domain and is a useful RNA design strategy, we analyzed the equilibrium folding and substrate binding of three classes of S-domain mutants. Addition or deletion of a base pair in the helical linker region between the modules only modestly destabilizes the tertiary structure. tRNA binding selectivity is affected in one but not in two other mutants of this class. Elimination of the GA3 tetraloop-receptor interactions significantly destabilizes the core module and results in the loss of tRNA binding selectivity. Replacing the buttress module with that of a homologous RNase P RNA maintains the tRNA binding selectivity. Overall, we have observed that the linker regions between the two modules can tolerate moderate structural changes and that the buttress modules can be shuffled between homologous S-domains. These results suggest that it is feasible to design an RNA using a buttress module to stabilize a functional module.     

RNA tertiary folding monitored by fluorescence of covalently attached pyrene

The pathways by which large RNAs adopt tertiary structure are just beginning to be explored, and new methods that reveal RNA folding are highly desirable. Here we report an assay for RNA tertiary folding in which the fluorescence of a covalently incorporated chromophore is monitored. Folding of the 160-nucleotide Tetrahymena group I intron P4-P6 domain was used as a test system. Guided by the P4-P6 X-ray crystal structure, we chose a nucleotide (U107) for which derivatization at the 2'-position should not perturb the folded conformation. A 15-mer RNA oligonucleotide with a 2'-amino substitution at U107 was derivatized with a pyrene chromophore on a variable-length tether, and then ligated to the remainder of P4-P6, providing a site-specifically pyrene-labeled P4-P6 derivative. Upon titration of the pyrene-derivatized P4-P6 with Mg(2+), the equilibrium fluorescence intensity reversibly increased several-fold, as expected if the probe's chemical microenvironment changes as the RNA to which it is attached folds. The concentration and specificity of divalent ions required to induce the fluorescence change (Mg(2+) approximately Ca(2+) > Sr(2+)) correlated well with biochemical folding assays that involve nondenaturing gel electrophoresis. Furthermore, mutations in P4-P6 remote from the chromophore that shifted the Mg(2+) folding requirement on nondenaturing gels also affected in a predictable way the Mg(2+) requirement for the fluorescence increase. Initial stopped-flow studies with millisecond time resolution suggest that this fluorescence method will be useful for following the kinetics of P4-P6 tertiary folding. We conclude that a single site-specifically tethered chromophore can report the formation of global structure of a large RNA molecule, allowing one to monitor both the equilibrium progress and the real-time kinetics of RNA tertiary folding.     

Structural basis of the enhanced stability of a mutant ribozyme domain and a detailed view of RNA--solvent interactions

BACKGROUND: The structure of P4-P6, a 160 nucleotide domain of the self-splicing Tetrahymena thermophila intron, was solved previously. Mutants of the P4-P6 RNA that form a more stable tertiary structure in solution were recently isolated by successive rounds of in vitro selection and amplification. RESULTS: We show that a single-site mutant (Delta C209) possessing greater tertiary stability than wild-type P4-P6 also crystallizes much more rapidly and under a wider variety of conditions. The crystal structure provides a satisfying explanation for the increased stability of the mutant; the deletion of C209 allows the adjacent bulged adenine to enter the P4 helix and form an A-G base pair, presumably attenuating the conformational flexibility of the helix. The structure of another mutant (Delta A210) was also solved and supports this interpretation. The crystals of Delta C209 diffract to a higher resolution limit than those of wild-type RNA (2.25 A versus 2.8 A), allowing assignment of innersphere and outersphere coordination contacts for 27 magnesium ions. Structural analysis reveals an intricate solvent scaffold with a preponderance of ordered water molecules on the inside rather than the surface of the folded RNA domain. CONCLUSIONS: In vitro evolution facilitated the identification of a highly stable, structurally homogeneous mutant RNA that was readily crystallizable. Analysis of the structure suggests that improving RNA secondary structure can stabilize tertiary structure and perhaps promote crystallization. In addition, the higher resolution model provides new details of metal ion-RNA interactions and identifies a core of ordered water molecules that may be integral to RNA tertiary structure formation.