Cloning and nucleotide sequence of the penicillinase antirepressor gene penJ of Bacillus licheniformis.

The penicillinase antirepressor gene, penJ, of Bacillus licheniformis ATCC 9945a was cloned in Escherichia coli by using pMB9 as a vector plasmid. The penicillinase gene, penP, its repressor gene, penI, and penJ were encoded on the cloned 5.2-kilobase HindIII fragment of the recombinant plasmid pTTE71. The penJ open reading frame was composed of 1,803 bases and 601 amino acid residues (molecular weight, 68,388). A Shine-Dalgarno sequence was found 7 bases upstream from the translation start site. Since this sequence was located in the 3'-terminal region of the penI gene, penJ might be transcribed together with penI as a polycistronic mRNA from the penI promoter. Frameshift mutations of penJ were constructed in vitro from pTTE71, and the penJ mutant gene was introduced into B. licheniformis by chromosomal recombination. The transformant B. licheniformis U173 (penP+ penI+ penJ) turned out to be uninducible for penicillinase production, whereas the wild-type strain (penP+ penI+ penJ+) was inducible. Only when these three genes (penP, penI, and PenJ) were simultaneously subcloned in Bacillus subtilis did the plasmid carrier exhibit inducible penicillinase production, as did wild-type B. licheniformis. It was concluded that penJ is involved in the penicillinase induction. The regulation of penP expression by penI and penJ is discussed.     

Cloning of the genes for penicillinase, penP and penI, of Bacillus licheniformis in some vector plasmids and their expression in Escherichia coli, Bacillus subtilis, and Bacillus licheniformis.

By using plasmid pMB9, penicillinase genes (penP and penI) from both the wild-type and constitutive strains of Bacillus licheniformis 9945A were cloned in EScherichia coli. When a low-copy-number plasmid was used, both wild-type and constitutive penicillinase genes could be transferred into Bacillus subtilis. However, when a high-copy-number plasmid was used, only the genes of the wild type could be transferred. These recombinant plasmids in B. subtilis could all be transferred by the protoplast transformation procedure into B. licheniformis. Transformants of E. coli were resistant to ampicillin (20 micrograms/ml) in spite of the low penicillinase activities (7 U/mg of cells). However, transformants of B. subtilis and B. licheniformis were sensitive to ampicillin (20 micrograms/ml) even in high penicillinase activities (more than 10,000 U/mg of cells). The secretion of penicillinase was rarely observed in E. coli. In contrast, penicillinases secreted from transformants of B. subtilis and B. licheniformis were around 30 and 60% of the total activities, respectively. We took advantage of the plasmids to permit the construction of hetero- and mero-polyploid structures in host cells, and we discuss a regulatory mechanism of penicillinase synthesis in B. licheniformis.     

Molecular cloning and expression of Bacillus licheniformis beta-lactamase gene in Escherichia coli and Bacillus subtilis.

The chromosomal beta-lactamase (penicillinase, penP) gene from Bacillus licheniformis 749/C has been cloned in Escherichia coli. The locations of the target sites for various restriction enzymes on the 4.2-kilobase EcoRI fragment were determined. By matching the restriction mapping data with the potential nucleotide sequences of the penP gene deduced from known protein sequence, we established the exact position of the penP gene on the fragment. A bifunctional plasmid vector carrying the penP gene, plasmid pOG2165, was constructed which directs the synthesis of the heterologous beta-lactamase in both E. coli and Bacillus subtilis hosts. The protein synthesized in E. coli and B. subtilis is similar in size to the processed beta-lactamase made in B. licheniformis. Furthermore, the beta-lactamase made in B. subtilis is efficiently secreted by the host into the culture medium, indicating that B. subtilis is capable of carrying out the post-translational proteolytic cleavage(s) to convert the membrane-bound precursor enzyme into the soluble extracellular form.     

Regulation of the penicillinase genes of Bacillus licheniformis: interaction of the pen repressor with its operators.

The synthesis of the inducible enzyme penicillinase of Bacillus licheniformis is negatively controlled by a repressor (D.A. Dubnau and M.R. Pollock, J. Gen. Microbiol. 41:7-21, 1965; D. J. Sherratt and J. F. Collins, J. Gen. Microbiol. 76:217-230,1973). The molecular organization of the genes coding for penicillinase (penP) and its repressor (penI) has recently been determined (T. Himeno, T. Imanaka, and S. Aiba, J. Bacteriol. 168:1128-1132, 1986). These two genes are transcribed divergently from within a 364-nucleotide region separating the coding sequences. We cloned and sequenced the repressor gene (penIc) from strain 749/C that constitutively produces penicillinase. The penIc and penI+ (wild-type) genes were expressed in Escherichia coli. Complementation analysis indicated that the repressor is the only trans-acting protein required to regulate the expression of the penI and penP genes. We purified the wild-type repressor protein, used it in gel retardation and DNase I protection experiments, and identified three operators positioned in the region between the penP and penI coding sequences. The spatial arrangement of the operators and the hierarchy in repressor binding seen in the protection experiments indicate that (i) the penI gene product represses the expression of the penP gene by physically blocking the RNA polymerase-binding site and (ii) the penI gene is autoregulated.     

Functional domains of the penicillinase repressor of Bacillus licheniformis.

The penicillinase repressor (PENI) negatively regulates expression of the penicillinase gene (penP) in Bacillus licheniformis by binding to its operators located within the promoter region of penP.penI codes for a protein with 128 amino acids. Filter-binding analyses suggest that the active form of the repressor is a dimer. Genetic analyses of PENI derivatives showed that the repressor carrying either a 6-amino-acid deletion near the N terminus or a 14-amino-acid deletion at the C terminus was functionally inactive in vivo. A repressor derivative carrying a 6-amino-acid deletion within its N-terminal region was extensively purified and used in DNA footprinting and subunit cross-linking analyses. The results of these studies showed that the repressor derivative had lost its ability to bind operator specifically even though it could dimerize effectively. In similar studies, we demonstrated that an N-terminal portion of PENI with a molecular mass of 10 kDa derived by digestion with papain was able to bind operator specifically but with reduced affinity and had completely lost its ability to dimerize. These data suggest that the repressor has two functional and separable domains. The amino-terminal domain of the repressor is responsible for operator recognition, and the carboxyl-terminal domain is involved in subunit dimerization.     

Protein secretion in Bacillus subtilis as influenced by the combination of signal sequence and the following mature portion

Abstract We have constructed secretion vector plasmids that have the signal sequence of the Bacillus licheniformis penicillinase gene ( penP ) or the Bacillus stearothermophilus α-amylase gene ( amyT ). We have also constructed penP, amyT and hsa (human salivary α-amylase gene) cartridges. Each of these cartridges was cloned on secretion vectors in Bacillus subtilis , and enzyme production was examined. When amyT vector was used, nearly the same efficiency of enzyme secretion was observed for amyT and penP cartridges. When penP vector was used, enzyme secretion for amyT decreased to about 3% of that for penP cartridges. The eukaryotic gene hsa was hardly expressed in any secretion vectors in B. subtilis .     

Isolation of an autonomously replicating DNA fragment from the region of defective bacteriophage PBSX of Bacillus subtilis

We have isolated a 5.4-kilobase fragment of Bacillus subtilis DNA that confers the ability to replicate upon a nonreplicative plasmid. The B. subtilis 168 EcoRI fragment was ligated into the chimeric plasmid pCs540, which contains a chloramphenicol resistance determinant from the Staphylococcus aureus plasmid pC194 and an HpaII fragment from the Escherichia coli plasmid, pSC101. A recE B. subtilis derivative, strain BD224, is capable of maintaining this DNA as an autonomously replicating plasmid. In rec+ recipients, chloramphenicol-resistant transformants do not contain free plasmid. The plasmid is integrated as demonstrated by alterations in the pattern of chromosomal restriction enzyme fragments to which the plasmid hybridizes. The site of plasmid integration was mapped by PBS1-mediated transduction to the metC-PBSX region. A strain was a deletion in the region of defective bacteriophage PBSX differs in the hybridization profile obtained by probing EcoRI digests with this cloned fragment. This same deletion mutant, though proficient in normal recombinational pathways, permits autonomous replication of the plasmid apparently owing to the lack of an homologous chromosomal region with which to recombine. We believe that, like E. coli. B. subtilis contains at least one DNA fragment capable of autonomous replication when liberated from its normally integrated chromosomal site and that this cloned DNA fragment comes from the region of defective bacteriophage PBSX.     

Essential structure in the cloned transforming DNA that induces gene amplification of the Bacillus subtilis amyE-tmrB region.

Bacillus subtilis B7, a mutant which acquired gene amplification of the amyE-tmrB region, showed, as a result, hyperproductivity (about a 5- to 10-fold increase) of alpha-amylase and tunicamycin resistance. The mutational character was transferred to recipient cells by competence transformation. A 14-kilobase (kb) EcoRI chromosomal DNA fragment of strain B7 was found to have the transforming activity. We cloned a 6.4-kb EcoRI fragment on a phage vector lambda Charon 4A through a spontaneous deletion of 7.6 kb from the 14-kb fragment and subcloned a 1.6-kb HindIII fragment on pGR71. The cloned 6.4-kb EcoRI and 1.6-kb HindIII fragments retained the transforming activity of inducing gene amplification of the amyE-tmrB region. At the junction point (J) of the repeating units (16 kb), the tmrB gene was linked to a DNA region (M) located 4 kb upstream of amyE. The essential structure of the cloned, transforming (gene amplification-inducing) DNA was deduced to be that around J. The subcloned 1.6-kb HindIII fragment that retained the transforming activity was shown to be almost solely composed of the tmrB-J-M region. In addition, the DNA sequence around J was determined.     

Two replication determinants of an antibiotic-resistance plasmid, pTB19, from a thermophilic bacillus

Two different replication determinants were found on an antibiotic resistance plasmid, pTB19, from a thermophilic bacillus. One replication determinant (designated RepA) was functional only in Bacillus subtilis, whereas the other (designated RepB) functioned in both B. subtilis and Bacillus stearothermophilus. A deletion plasmid, pTB90, carrying the RepB derived from pTB19 coincidentally contained the specific 1.0 MDal EcoRI fragment of a cryptic plasmid pBSO2 from B. stearothermophilus. The presence of this 1.0 MDal EcoRI fragment in various deletion plasmids from pTB90 increased transformation frequencies for B. stearothermophilus 10(3) to 10(4) times and lowered plasmid copy numbers in the host strain to about one-tenth of those found for plasmids lacking this fragment.     

Region of the streptococcal plasmid pMV158 required for conjugative mobilization.

The nonconjugative streptococcal plasmid pMV158 can be mobilized by the conjugative streptococcal plasmid pIP501. We determined the sequence of the 1.1-kilobase EcoRI fragment of pMV158 to complete the DNA sequence of the plasmid. We showed that an open reading frame, mob (able to encode a polypeptide of 58,020 daltons), is required for mobilization of pMV158. An intergenic region present in the EcoRI fragment contains four lengthy palindromes that are found also in one or more of the staphylococcal plasmids pT181, pE194, and pUB110. One palindromic sequence, palD, which is common to all four plasmids, also appeared to be necessary for mobilization. Circumstantial evidence indicates that this sequence contains both an oriT site and the mob promoter. The Mob protein is homologous in its amino-terminal half to Pre proteins encoded by pT181 and pE194 that were shown by others to be essential for site-specific cointegrative plasmid recombination; their main biological function may be plasmid mobilization.     

Characterization of interspecific plasmid transfer mediated by Bacillus subtilis temperate bacteriophage SP02.

Plasmid pPL1010 is a 7.0-kilobase derivative of plasmid pUB110 that harbors the cohesive end site of the bacteriophage SP02 genome. Plasmid pPL1017 is a 6.8-kilobase derivative of plasmid pC194 that contains the immunity region of bacteriophage phi 105 and the cohesive end site of bacteriophage SP02. These plasmids are transducible by bacteriophage SP02 at a frequency of 10(-2) transductants per PFU among mutant derivatives of Bacillus subtilis 168 and have been transferred to other strains of B. subtilis and B. amyloliquefaciens by means of bacteriophage SP02-mediated transduction, with frequencies ranging from 10(-5) to 10(-7) transductants per PFU. The introduced plasmids were stably maintained in nearly all new hosts in the absence of selective pressure. An exception was found in B. subtilis DSM704, which also harbored three cryptic plasmids. Plasmids pPL1010 and pPL1017 were incompatible with a 7.9-kilobase replicon native to strain DSM704. Furthermore, plasmid pPL1017 was processed by strain DSM704 into a approximately 5.3-kilobase replicon that was compatible with the resident plasmid content of strain DSM704. The use of bacteriophage SP02-mediated plasmid transduction has allowed the identification of Bacillus strains that are susceptible to bacteriophage SP02-mediated genetic transfer but cannot support bacteriophage SP02 lytic infection.     

短小芽孢杆菌碱性蛋白酶基因启动子的克隆、鉴定及其应用

利用TAIL-PCR(Thermal asymmetric interlaced PCR)从短小芽孢杆菌基因组中扩增到碱性蛋白酶基因编码区上游的启动子片段。对该片段的序列测定和分析表明, 此片段长797 bp, 但与基因表达有关的序列长约390 bp。对启动子片段进行不同长度的缺失突变, 以获得最小的基因启动子片段, 结果表明, 该基因起始密码子上游约160 bp的DNA片段就可以启动基因的表达。将含有该片段的碱性蛋白酶基因WApQ3插入大肠杆菌-芽孢杆菌穿梭质粒载体pSUGV4中, 构建了碱性蛋白酶基因表达质粒pSUBpWApQ3。将该质粒分别转入枯草芽孢杆菌和短小芽孢杆菌中表达, 可在胞外检测到碱性蛋白酶活性, 最高酶活分别为466.5 U/mL和3060 U/mL。     

Temperature-dependent plasmid integration into and excision from the chromosome of Bacillus stearothermophilus

A transformant of Bacillus stearothermophilus carrying a recombinant plasmid, pLP11 (9.5 MDa), on which the penicillinase gene (penP) and kanamycin resistance gene (kan) were located was subjected to mutagenesis, and a mutant plasmid (9.5 MDa; penP kan), designated pTRA117, was obtained. A transformant of B. stearothermophilus carrying pTRA117 could grow at 63 degrees C in medium containing kanamycin, whereas a transformant carrying pLP11 could not. Although pTRA117 was detected as covalently closed circular (ccc) DNA when it was extracted from transformants cultured at 48 degrees C, it was integrated into the host chromosome when the culture temperature was shifted up to 63 degrees C. If the culture temperature was lowered to 48 degrees C from 63 degrees C, a new plasmid (10.7 MDa; penP kan), designated pTRZ117, could be detected as ccc DNA; the size of this plasmid suggested that it was pTRA117 plus a 1.2 MDa DNA fragment of the host chromosome, and this was confirmed by Southern hybridization. pTRZ90 (7.9 MDa; kan) was constructed from pTRZ117 by the deletion of a 2.8 MDa DNA fragment that contained penP. Fresh transformants of B. stearothermophilus that carried either pTRZ117 or pTRZ90 could grow at 65 degrees C.