Genetic complementation analysis of Escherichia coli type 1 somatic pilus mutants.

A genetic complementation analysis of 75 stable nonpiliated mutants of a type 1 piliated strain of Escherichia coli K-12, AW405, was performed. Strains containing pairs of pil mutations were constructed by the infectious transfer of an F101 plasmid containing one pil mutation into E. coli K-12 AW 405 containing another pil mutation. The presence or absence of type 1 pili on the merodiploid strains was determined by agglutination with type 1 pilus antiserum. All 75 mutants fell into one of four complementation groups. The pattern of complementation defined three cistrons involved in pilus formation, pilA, pilB, and pilC. The fourth complementation group was composed of a large number of mutants defective in both pilA and pilB functions.     

Physical and genetic analysis of deletion mutants of plasmid R91-5 and the cloning of transfer genes in Pseudomonas aeruginosa.

We isolated deletion mutants of Pseudomonas aeruginosa plasmid R91-5 by both in vitro and in vivo means. Many of the deletion mutants selected on the basis of resistance to donor-specific phages fell into a few groups of apparently identical mutants, although the mutants were nonsibs. By analyzing plasmids with large deletions, we found that the essential replication genes of R91-5 were within a 3.85-kilobase region between coordinates 45.5 and 48.9. The origin of plasmid transfer (oriT) was mapped to a 4.5-kilobase region between coordinates 1.7 and 6.2. We indirectly determined the direction of plasmid transfer from oriT. By combining the data from our analysis of the deletions with data from complementation tests between cloned R91-5 fragments and known reference mutants, we ordered and mapped the 10 known transfer (tra) cistrons of R91-5. All of the tra cistrons mapped within the Tra2 region, and their order was as follows: traX, -Y, -T, -Q, -(V, R), -U, -(S, Z), -W (the cistrons in parentheses could not be ordered with respect to each other).     

Cloning and genetic analysis of tra cistrons of the Tra 2/Tra 3 region of plasmid RP1

Transfer-defective mutants of the 10.4-kb Tra 2/Tra 3 region of RP1 were identified by their ability to be complemented by clones carrying all or part of this region. The respective mutations occurred in six cistrons whose order (traA, B, E, R, P, Q) and location were determined by deletion and insertion mapping. The cistrons occupy a minimum of 5.5 kb with the most distal, traA, spanning the 28.0-kb map position and traR the KpnI site at map position 24.1 kb. Each cistron is expressed independently, as Tn5 or Tn504 insertions in any one cistron do not affect the other five. The phenotypes controlled by each cistron suggest that all contribute to pilus biosynthesis/function while three (traB, R, and P) also contribute to surface exclusion. Given the occurrence of tra cistrons in the "silent" region between Tra 2 and Tra 3 we propose that the epithet "Tra 2" should be used to describe this entire region.     

Analysis of the mobilization region of the broad-host-range IncQ-like plasmid pTC-F14 and its ability to interact with a related plasmid, pTF-FC2

Plasmid pTC-F14 is a 14.2-kb plasmid isolated from Acidithiobacillus caldus that has a replicon that is closely related to the promiscuous, broad-host-range IncQ family of plasmids. The region containing the mobilization genes was sequenced and encoded five Mob proteins that were related to those of the DNA processing (Dtr or Tra1) region of IncP plasmids rather than to the three-Mob-protein system of the IncQ group 1 plasmids (e.g., plasmid RSF1010 or R1162). Plasmid pTC-F14 is the second example of an IncQ family plasmid that has five mob genes, the other being pTF-FC2. The minimal region that was essential for mobilization included the mobA, mobB, and mobC genes, as well as the oriT gene. The mobD and mobE genes were nonessential, but together, they enhanced the mobilization frequency by approximately 300-fold. Mobilization of pTC-F14 between Escherichia coli strains by a chromosomally integrated RP4 plasmid was more than 3,500-fold less efficient than the mobilization of pTF-FC2. When both plasmids were coresident in the same E. coli host, pTC-F14 was mobilized at almost the same frequency as pTF-FC2. This enhanced pTC-F14 mobilization frequency was due to the presence of a combination of the pTF-FC2 mobD and mobE gene products, the functions of which are still unknown. Mob protein interaction at the oriT regions was unidirectionally plasmid specific in that a plasmid with the oriT region of pTC-F14 could be mobilized by pTF-FC2 but not vice versa. No evidence for any negative effect on the transfer of one plasmid by the related, potentially competitive plasmid was obtained.     

F factor inhibition of conjugal transfer of broad-host-range plasmid RP4: requirement for the protein product of pif operon regulatory gene pifC.

By the use of deletions, point mutations, and gene fusions, we show that the protein product of the F factor pifC gene is responsible for F factor inhibition of plasmid RP4 conjugal transfer. Deletion analysis of pif sequences carried by pSC101-F chimeric plasmids demonstrated that removal of all or part of the pifC coding sequence greatly decreased or abolished the ability of these plasmids to inhibit RP4 transfer. Amber mutations in the pifC gene eliminated inhibition in an Su- host strain but not in and Su+ (supF) host. Plasmids carrying nonpolar pifC mutations did not decrease the efficiency of RP4 transfer when present in trans. Whereas pifC+ plasmids inhibited RP4 transfer, the presence of RP4 in the same cell as F' lac increased F'lac Pif activity approximately 1,000-fold. This effect most likely resulted from the binding of the pifC product to RP4 DNA and concomitant derepression of the F factor pif operon. PifC inhibited trans mobilization of pMS204, a nonconjugative plasmid carrying the RP4 oriT locus, by the RP1 derivative pUB307. pMS204 had no trans effect on pif operon expression, whereas pUB307 increased F'lac Pif expression, as did RP4. Our results suggest that the pifC product inhibits expression of one or more RP4 genes, the products of which are required for conjugal transfer of RP4 and are required in trans for mobilization of nonconjugal RP4 oriT containing plasmids.     

Mobilization of the relaxable Staphylococcus aureus plasmid pC221 by the conjugative plasmid pGO1 involves three pC221 loci.

The Staphylococcus aureus plasmid pC221, a 4.6-kilobase multicopy chloramphenicol resistance plasmid that forms plasmid-protein relaxation complexes, was mobilized for transfer by the conjugative plasmid pGO1. Two open reading frames on the pC221 genome, now designated mobA and mobB, as well as a cis-acting locus, the putative oriT, were shown to be in involved in pC221 mobilization. The mobA (but not mobB) and oriT loci were required for pC221 relaxation, and relaxation was necessary but not sufficient for pC221 mobilization by pGO1. oriT was cloned onto a pE194 derivative and complemented in trans for both relaxation and mobilization. Mobilization of relaxable plasmids in S. aureus appears to be analogous to mobilization by donation observed in gram-negative bacteria.     

The Myxococcus xanthuspilT locus is required for social gliding motility although pili are still produced

Social gliding motility in Myxococcus xanthus depends on the presence of Type IV pili. To begin to examine the role of pili in social motility, 17 mutants were identified which had lost social motility, but still expressed pili. Four of these mutants carry point mutations which mapped to a locus upstream of the recently identified pilS , pilR , and pilA genes. Sequencing of this locus revealed a gene with homology to pilT from Pseudomonas aeruginosa . Sequencing of the four point mutations revealed that they occurred within the M. xanthus pilT locus. A markerless deletion within M. xanthus pilT , similar to the four point mutations, disrupted social gliding behaviour but did not interfere with pilus formation or pilus-dependent cell–cell agglutination. Using time-lapse videomicroscopy, residual social motility was observed in dsp ⁻ strains (known to be deficient in fibril but not pilus production); this was not observed in a Δ pilT dsp ⁻ double mutant. Two genes flanking pilT  were also sequenced, and found to have homology to pilB and pilC from P. aeruginosa . Markerless deletions within these genes caused both pilus and social-motility defects. These results indicate that M. xanthus pilB and pilC are required for pilus biogenesis, while pilT is required for assembled pili to play their role in social motility. Thus, pilB , pilT , pilC , pilS , pilR and pilA form a contiguous cluster of pil genes required for social motility.     

Role of the Eikenella corrodens pilA locus in pilus function and phase variation

The human pathogen Eikenella corrodens expresses type IV pili and exhibits a phase variation involving the irreversible transition from piliated to nonpiliated variants. On solid medium, piliated variants form small (S-phase), corroding colonies whereas nonpiliated variants form large (L-phase), noncorroding colonies. We are studying pilus structure and function in the clinical isolate E. corrodens VA1. Earlier work defined the pilA locus which includes pilA1, pilA2, pilB, and hagA. Both pilA1 and pilA2 predict a type IV pilin, whereas pilB predicts a putative pilus assembly protein. The role of hagA has not been clearly established. That work also confirmed that pilA1 encodes the major pilus protein in this strain and showed that the phase variation involves a posttranslational event in pilus formation. In this study, the function of the individual genes comprising the pilA locus was examined using a recently developed protocol for targeted interposon mutagenesis of S-phase variant VA1-S1. Different pilA mutants were compared to S-phase and L-phase variants for several distinct aspects of phase variation and type IV pilus biosynthesis and function. S-phase cells were characterized by surface pili, competence for natural transformation, and twitching motility, whereas L-phase cells lacked these features. Inactivation of pilA1 yielded a mutant that was phenotypically indistinguishable from L-phase variants, showing that native biosynthesis of the type IV pilus in strain VA1 is dependent on expression of pilA1 and proper export and assembly of PilA1. Inactivation of pilA2 yielded a mutant that was phenotypically indistinguishable from S-phase variants, indicating that pilA2 is not essential for biosynthesis of functionally normal pili. A mutant inactivated for pilB was deficient for twitching motility, suggesting a role for PilB in this pilus-related phenomenon. Inactivation of hagA, which may encode a tellurite resistance protein, had no effect on pilus structure or function.     

Cloning the Tra1 region of RP1

The Tra1 region of RP1 from a derivative with Tn7 inserted into the kanamycin resistance determinant was cloned, using EcoRI, into the multicopy vector plasmid pBR325. For one orientation of the cloned fragment the resultant chimeric plasmid was very frequently lost from the cell, but in the other orientation it was much more stable and also compatible with RP1. Complementation by the stable chimeric plasmid, pED800, of a series of RP1 tra mutants showed that the mutations of all those retaining sensitivity to the P-specific phages PRR1, Pf3, and PR4, or only to PR4, mapped in the Tra1 region, while only 2 out of 20 amber mutations leading to full P-specific phage-resistance did so.     

General organization of the conjugal transfer genes of the IncW plasmid R388 and interactions between R388 and IncN and IncP plasmids.

The complete conjugal transfer gene region of the IncW plasmid R388 has been cloned in multicopy vector plasmids and mapped to a contiguous 14.9-kilobase segment by insertion mutagenesis. The fertility of the cloned region could still be inhibited by a coresident IncP plasmid. The transfer region has been dissected into two regions, one involved in pilus synthesis and assembly (PILW), and the other involved in conjugal DNA metabolism (MOBW). They have been separately cloned. PILW also contains the genes involved in entry exclusion. MOBW contains oriT and the gene products required for efficient mobilization by PILW. MOBW plasmids could also be mobilized efficiently by PILN, the specific pilus of the IncN plasmid pCU1, but not by PILP, the specific pilus of the IncP plasmid RP1.     

A specific protease encoded by the conjugative DNA transfer systems of IncP and Ti plasmids is essential for pilus synthesis.

TraF, an essential component of the conjugative transfer apparatus of the broad-host-range plasmid RP4 (IncP), which is located at the periplasmic side of the cytoplasmic membrane, encodes a specific protease. The traF gene products of IncP and Ti plasmids show extensive similarities to prokaryotic and eukaryotic signal peptidases. Mutational analysis of RP4 TraF revealed that the mechanism of the proteolytic cleavage reaction resembles that of signal and LexA-like peptidases. Among the RP4 transfer functions, the product of the Tra2 gene, trbC, was identified as a target for the TraF protease activity. TrbC is homologous to VirB2 of Ti plasmids and thought to encode the RP4 prepilin. The maturation of TrbC involves three processing reactions: (i) the removal of the N-terminal signal peptide by Escherichia coli signal peptidase I (Lep), (ii) a proteolytic cleavage at the C terminus by an as yet unidentified host cell enzyme, and (iii) C-terminal processing by TraF. The third reaction of the maturation process is critical for conjugative transfer, pilus synthesis, and the propagation of the donor-specific bacteriophage PRD1. Thus, cleavage of TrbC by TraF appears to be one of the initial steps in a cascade of processes involved in export of the RP4 pilus subunit and pilus assembly mediated by the RP4 mating pair formation function.     

Two Escherichia coli chromosomal cistrons, sfrA and sfrB, which are needed for expression of F factor tra functions.

Twelve mutants of Escherichia coli K-12 have been isolated which carry chromosomal mutations that exhibit pleiotropic effects on the expression of F factor tra cistrons. F pilus synthesis, deoxyribonucleic acid transfer, and surface exclusion are all inhibited. Six of the mutants carry sfrA mutations, and six carry sfrB mutations. sfrA and sfrB are cistrons mapping near thr and metE, respectively. Several F-like plasmids are dependent on sfrA and on sfrB for expression of tra cistrons. Plasmids of incompatibility groups C and S are only dependent on sfrB,and other conjugative plasmids are dependent on neither. sfrB mutations also result in changes in certain cell envelope properties, including change sensitivity to certain bacteriophages which use lipopolysaccharide as a receptor, synthesis of nonfunctional flagella, and altered sensitivity to antibiotics.     

Type IV pilus genes pilA and pilC of Pseudomonas stutzeri are required for natural genetic transformation, and pilA can be replaced by corresponding genes from nontransformable species

Pseudomonas stutzeri lives in terrestrial and aquatic habitats and is capable of natural genetic transformation. After transposon mutagenesis, transformation-deficient mutants were isolated from a P. stutzeri JM300 strain. In one of them a gene which coded for a protein with 75% amino acid sequence identity to PilC of Pseudomonas aeruginosa, an accessory protein for type IV pilus biogenesis, was inactivated. The presence of type IV pili was demonstrated by susceptibility to the type IV pilus-dependent phage PO4, by occurrence of twitching motility, and by electron microscopy. The pilC mutant had no pili and was defective in twitching motility. Further sequencing revealed that pilC is clustered in an operon with genes homologous to pilB and pilD of P. aeruginosa, which are also involved in pilus formation. Next to these genes but transcribed in the opposite orientation a pilA gene encoding a protein with high amino acid sequence identity to pilin, the structural component of type IV pili, was identified. Insertional inactivation of pilA abolished pilus formation, PO4 plating, twitching motility, and natural transformation. The amounts of (3)H-labeled P. stutzeri DNA that were bound to competent parental cells and taken up were strongly reduced in the pilC and pilA mutants. Remarkably, the cloned pilA genes from nontransformable organisms like Dichelobacter nodosus and the PAK and PAO strains of P. aeruginosa fully restored pilus formation and transformability of the P. stutzeri pilA mutant (along with PO4 plating and twitching motility). It is concluded that the type IV pili of the soil bacterium P. stutzeri function in DNA uptake for transformation and that their role in this process is not confined to the species-specific pilin.     

Bacterial conjugation mediated by plasmid RP4: RSF1010 mobilization, donor-specific phage propagation, and pilus production require the same Tra2 core components of a proposed DNA transport complex.

DNA transfer by bacterial conjugation requires a mating pair formation (Mpf) system that specifies functions for establishing the physical contact between the donor and the recipient cell and for DNA transport across membranes. Plasmid RP4 (IncP alpha) contains two transfer regions designated Tra1 and Tra2, both of which contribute to Mpf. Twelve components are essential for Mpf, TraF of Tra1 and 11 Tra2 proteins, TrbB, -C, -D, -E, -F, -G, -H, -I, -J, -K, and -L. The phenotype of defined mutants in each of the Tra2 genes was determined. Each of the genes, except trbK, was found to be essential for RP4-specific plasmid transfer and for mobilization of the IncQ plasmid RSF1010. The latter process did not absolutely require trbF, but a severe reduction of the mobilization frequency occurred in its absence. Transfer proficiency of the mutants was restored by complementation with defined Tra2 segments containing single trb genes. Donor-specific phage propagation showed that traF and each of the genes encoded by Tra2 are involved. Phage PRD1, however, still adsorbed to the trbK mutant strain but not to any of the other mutant strains, suggesting the existence of a plasmid-encoded receptor complex. Strains containing the Tra2 plasmid in concert with traF were found to overexpress trb products as well as extracellular filaments visualized by electron microscopy. Each trb gene and traF are needed for the formation of the pilus-like structures. The trbK gene, which is required for PRD1 propagation and for pilus production but not for DNA transfer on solid media, encodes the RP4 entry-exclusion function. The components of the RP4 Mpf system are discussed in the context of related macromolecule export systems.     

Mobilization of recombinant plasmids from Staphylococcus aureus into coagulase negative Staphylococcus species.

pC221, a small nonconjugative staphylococcal plasmid, can be mobilized between staphylococci by pG01, a larger conjugative plasmid. pC221 carries the two transacting genes, mobA and mobB, which are needed for its mobilization. The products of these genes create a site-specific single-stranded nick (mobA) and then facilitate DNA transfer (mobB). Several useful Escherichia coli-staphylococcal shuttle plasmids containing the cloned single-stranded nick site were created and successfully mobilized into Staphylococcus aureus and two coagulase-negative staphylococci, S. epidermidis and S. saprophyticus, by providing mob genes (pC221) and conjugative transfer genes (pG01) in trans in the donor. These vectors may offer a genetic system for the introduction of recombinant plasmids into coagulase negative staphylococci.     

Determination of the mechanism of retrotransfer by mechanistic mathematical modeling.

Two mathematical models to elucidate the mechanism of retromobilization (or retrotransfer), that is, the ability of conjugative plasmids to mobilize genes into the cell containing the conjugative plasmid, were developed. This study deals with retromobilization of nonconjugative plasmids (Tra-Mob+). Plasmid transfer was modeled by two mass action models. The first is based on the hypothesis that retromobilization of the Tra-Mob+ vector occurs in one step, by means of the pilus formed by the Tra+ plasmid in the original host. In the second model, retromobilization is considered to be a two-step process involving two transfer events. The first step involves the transfer of the Tra+ plasmid from the recipient cell to the donor of the nonconjugative vector, and during the second encounter the nonconjugative vector is mobilized toward the recipient. Since the relationships between the number of transconjugants and the number of recipients for the two models are different, filter matings were performed for short time periods with different initial densities of the recipient population. Comparison of the numbers of transconjugants with the results of the mathematical equations confirmed the hypothesis that retromobilization is a one-step conjugation process.     

Requirements for strand- and site-specific cleavage within the oriT region of Tn4399, a mobilizing transposon from Bacteroides fragilis.

Replicons that contain Tn4399, a conjugal mobilizing transposon isolated from Bacteroides fragilis, can be mobilized in the presence of broad-host-range IncP plasmids RP4 and R751 in Escherichia coli to B. fragilis or E. coli recipients (C. G. Murphy and M. H. Malamy, J. Bacteriol. 175:5814-5823, 1993). To identify the initial DNA processing events involved in Tn4399-mediated mobilization in E. coli, plasmid DNA from pCGM328 (a pUC7 vector that contains the mobilization region of Tn4399) was isolated from donor cells following the release of plasmid DNA from the relaxation complex. Site- and strand-specific cleavage within the oriT region of Tn4399 was detected by denaturing gel electrophoresis and Southern hybridization analysis of this DNA in the presence or absence of IncP plasmids. Mutations in either mocA or mocB, two genes which are encoded by Tn4399 and are required for mobilization, significantly decrease the amount of specifically nicked DNA detected. These results suggest roles for the MocA and MocB gene products in specific processing of Tn4399-containing plasmid DNA prior to mobilization. By isolation of the nicked strand and primer extension of this template, we mapped the precise 5' end of the single-stranded cleavage reaction. The nucleotide position of nicTn4399 is adjacent to two sets of inverted repeats, a genetic arrangement similar to those of previously characterized oriT regions. Two site-directed mutations which remove nicTn4399 (oriT delta 1 and oriT delta 2) cannot be mobilized to recipients when they are present in trans along with functional MocA and MocB proteins and an IncP mobilizing plasmid; they are cis-dominant loss-of-function mutations.