Myosin II filament assemblies in the active lamella of fibroblasts: their morphogenesis and role in the formation of actin filament bundles

The morphogenesis of myosin II structures in active lamella undergoing net protrusion was analyzed by correlative fluorescence and electron microscopy. In rat embryo fibroblasts (REF 52) microinjected with tetramethylrhodamine-myosin II, nascent myosin spots formed close to the active edge during periods of retraction and then elongated into wavy ribbons of uniform width. The spots and ribbons initially behaved as distinct structural entities but subsequently aligned with each other in a sarcomeric-like pattern. Electron microscopy established that the spots and ribbons consisted of bipolar minifilaments associated with each other at their head-containing ends and arranged in a single row in an "open" zig-zag conformation or as a "closed" parallel stack. Ribbons also contacted each other in a nonsarcomeric, network-like arrangement as described previously (Verkhovsky and Borisy, 1993. J. Cell Biol. 123:637-652). Myosin ribbons were particularly pronounced in REF 52 cells, but small ribbons and networks were found also in a range of other mammalian cells. At the edge of the cell, individual spots and open ribbons were associated with relatively disordered actin filaments. Further from the edge, myosin filament alignment increased in parallel with the development of actin bundles. In actin bundles, the actin cross-linking protein, alpha-actinin, was excluded from sites of myosin localization but concentrated in paired sites flanking each myosin ribbon, suggesting that myosin filament association may initiate a pathway for the formation of actin filament bundles. We propose that zig-zag assemblies of myosin II filaments induce the formation of actin bundles by pulling on an actin filament network and that co-alignment of actin and myosin filaments proceeds via folding of myosin II filament assemblies in an accordion-like fashion.     

Modeling rigor cross-bridge patterns in muscle I. Initial studies of the rigor lattice of insect flight muscle.

We have undertaken some computer modeling studies of the cross-bridge observed by Reedy in insect flight muscle so that we investigate the geometric parameters that influence the attachment patterns of cross-bridges to actin filaments. We find that the appearance of double chevrons along an actin filament indicates that the cross-bridges are able to reach 10--14 nm axially, and about 90 degrees around the actin filament. Between three and five actin monomers are therefore available along each turn of one strand of actin helix for labeling by cross-bridges from an adjacent myosin filament. Reedy's flared X of four bridges, which appears rotated 60 degrees at successive levels on the thick filament, depends on the orientation of the actin filaments in the whole lattice as well as on the range of movement in each cross-bridge. Fairly accurate chevrons and flared X groupings can be modeled with a six-stranded myosin surface lattice. The 116-nm long repeat appears in our models as "beating" of the 14.5-nm myosin repeat and the 38.5-nm actin period. Fourier transforms of the labeled actin filaments indicate that the cross-bridges attach to each actin filament on average of 14.5 nm apart. The transform is sensitive to changes in the ease with which the cross-bridge can be distorted in different directions.     

Kinetics of actin-myosin binding. I. An exactly soluble one-variable model.

To treat the kinetics of actin-myosin binding as simply as possible, a one-variable model is developed and the notion of effectivity factors is introduced. An effectivity factor is a ratio of the reaction rate in the presence of cooperativity to that in the noncooperative case and is calculated by averaging cooperativity factors over all sites belonging to one seven-site actin unit. The technique is applicable to a variety of models involving cooperative association and dissociation processes. This averaging assumes the equivalence of all regulated actin units. The model may be solved exactly for arbitrary degrees of "preloading" of subfragment 1 (S1) on the regulated actin.     

A Peek into Tropomyosin Binding and Unfolding on the Actin Filament

Background

Tropomyosin is a prototypical coiled coil along its length with subtle variations in structure that allow interactions with actin and other proteins. Actin binding globally stabilizes tropomyosin. Tropomyosin-actin interaction occurs periodically along the length of tropomyosin. However, it is not well understood how tropomyosin binds actin.

Principal Findings

Tropomyosin''s periodic binding sites make differential contributions to two components of actin binding, cooperativity and affinity, and can be classified as primary or secondary sites. We show through mutagenesis and analysis of recombinant striated muscle α-tropomyosins that primary actin binding sites have a destabilizing coiled-coil interface, typically alanine-rich, embedded within a non-interface recognition sequence. Introduction of an Ala cluster in place of the native, more stable interface in period 2 and/or period 3 sites (of seven) increased the affinity or cooperativity of actin binding, analysed by cosedimentation and differential scanning calorimetry. Replacement of period 3 with period 5 sequence, an unstable region of known importance for cooperative actin binding, increased the cooperativity of binding. Introduction of the fluorescent probe, pyrene, near the mutation sites in periods 2 and 3 reported local instability, stabilization by actin binding, and local unfolding before or coincident with dissociation from actin (measured using light scattering), and chain dissociation (analyzed using circular dichroism).

Conclusions

This, and previous work, suggests that regions of tropomyosin involved in binding actin have non-interface residues specific for interaction with actin and an unstable interface that is locally stabilized upon binding. The destabilized interface allows residues on the coiled-coil surface to obtain an optimal conformation for interaction with actin by increasing the number of local substates that the side chains can sample. We suggest that local disorder is a property typical of coiled coil binding sites and proteins that have multiple binding partners, of which tropomyosin is one type.     

Calcium regulation of muscle contraction.

Calcium triggers contraction by reaction with regulatory proteins that in the absence of calcium prevent interaction of actin and myosin. Two different regulatory systems are found in different muscles. In actin-linked regulation troponin and tropomyosin regulate actin by blocking sites on actin required for complex formation with myosin; in myosin-linked regulation sites on myosin are blocked in the absence of calcium. The major features of actin control are as follows: there is a requirement for tropomyosin and for a troponin complex having three different subunits with different functions; the actin displays a cooperative behavior; and a movement of tropomyosin occurs controlled by the calcium binding on troponin. Myosin regulation is controlled by a regulatory subunit that can be dissociated in scallop myosin reversibly by removing divalent cations with EDTA. Myosin control can function with pure actin in the absence of tropomyosin. Calcium binding and regulation of molluscan myosins depend on the presence of regulatory light chains. It is proposed that the light chains function by sterically blocking myosin sites in the absence of calcium, and that the "off" state of myosin requires cooperation between the two myosin heads. Both myosin control and actin control are widely distributed in different organisms. Many invertebrates have muscles with both types of regulation. Actin control is absent in the muscles of molluscs and in several minor phyla that lack troponin. Myosin control is not found in striated vertebrate muscles and in the fast muscles of crustacean decapods, although regulatory light chains are present. While in vivo myosin control may not be excluded from vertebrate striated muscles, myosin control may be absent as a result of mutations of the myosin heavy chain.     

Tunicate muscle actin genes. Structure and organization as a gene cluster.

We have isolated and determined the complete nucleotide sequences of two genes, HrMA4a and HrMA2, which encode the same muscle actin protein of the tunicate Halocynthia roretzi. HrMA4a and HrMA2 contain three exons, and the genes have intron-exon splice junctions at the same positions. The 5' flanking region of HrMA4a gene contains several potential regulatory elements. A TATA box is located at -30 and a CArG box found in regulatory region of vertebrate muscle-specific genes is located at -116. Seven E-box consensus sequences (CANNTG) known as binding sites for vertebrate myogenic determination factors are found within a 500 base-pair portion of the 5' flanking region of HrMA4a gene. HrMA4a and HrMA2 are separated by 1600 bases in genomic DNA and transcribed in the same direction. In addition to these genes, we have identified three other actin genes encoding muscle-type actins. All five actin genes are located in a 30 x 10(3) base-pair region of the genome and aligned in the same direction. This is the first report of a cluster of "vertebrate-type" muscle actin genes. The consensus sequences of 5' flanking region are conserved among these five genes, suggesting that the expression of the genes is controlled coordinately. This may be advantageous for the accumulation of considerable amounts of actin proteins in rapidly developing embryos of this animal.     

Endocytic internalization in budding yeast requires coordinated actin nucleation and myosin motor activity

Actin polymerization essential for endocytic internalization in budding yeast is controlled by four nucleation promoting factors (NPFs) that each exhibits a unique dynamic behavior at endocytic sites. How each NPF functions and is regulated to restrict actin assembly to late stages of endocytic internalization is not known. Quantitative analysis of NPF biochemical activities, and genetic analysis of recruitment and regulatory mechanisms, defined a linear pathway in which protein composition changes at endocytic sites control actin assembly and function. We show that yeast WASP initiates actin assembly at endocytic sites and that this assembly and the recruitment of a yeast WIP-like protein by WASP recruit a type I myosin with both NPF and motor activities. Importantly, type I myosin motor and NPF activities are separable, and both contribute to endocytic coat inward movement, which likely represents membrane invagination. These results reveal a mechanism in which actin nucleation and myosin motor activity cooperate to promote endocytic internalization.     

The binding of Ca2+ to actin monomer is monitored by the fluorescence of actin-bound auramine O.

The fluorescence of the cation auramine O was substantially enhanced by the presence of actin monomer. Titrations of this fluorescence enhancement indicated that actin monomer had two auramine O binding sites, each with a dissociation constant of approx. 20 microM. Calcium ions had no effect on the number of actin monomer-bound auramine O molecules or on the dissociation constant for that interaction. However, calcium ions increased the maximum change of fluorescence that occurs when actin monomer was fully saturated with auramine O. This effect of calcium was saturable and yielded a Ca2+ dissociation constant of 1.6 mM. It was concluded that auramine O bound to sites on actin monomer and independently monitored the binding of Ca2+ ion(s) to other site(s) on actin monomer. Further, the magnitude of the Ca2+ dissociation constant suggested that this Ca2+-binding site may be representative of the multiple bivalent cation-binding sites on actin monomer which are thought to be directly involved in actin polymerization. However, the exact relationship between these sites remains unclear.     

Each actin subunit has three nebulin binding sites: implications for steric blocking

Nebulin is a giant protein that spans most of the muscle thin filament. Mutations in nebulin result in myopathies and dystrophies. Nebulin contains approximately 200 copies of approximately 35 residue modules, each believed to contain an actin binding site, organized into seven-module superrepeats. The strong correlation between the number of nebulin modules and the length of skeletal muscle thin filaments in different species suggests that nebulin determines thin filament length. Little information exists about the interactions between intact nebulin and F-actin. More insight has come from working with fragments of nebulin, containing from one to hundreds of actin binding modules. However, the observed stoichiometry of binding between these fragments and actin has ranged from 0.4 to 13 modules per actin subunit. We have used electron microscopy and a novel method of helical image analysis to characterize complexes of F-actin with a nebulin fragment. The fragment binds as an extended structure spanning three actin subunits and binding to different sites on each actin. Muscle regulation involves tropomyosin movement on the surface of actin, with binding in three states. Our results suggest the intriguing possibility that intact nebulin may also be able to occupy three different sites on F-actin.     

Crystalline actin sheets: their structure and polymorphism

Crystalline sheets of Acanthamoeba actin induced by the trivalent lanthanide gadolinium exist in three different polymorphic forms, which show different striation patterns and surface topographies. We have called these different forms "rectangular" and "square" sheets, and "cylinders" and have shown that each of the three forms is constructed from common "basic" lattices associated in different ways. We have used image processing of electron micrographs to obtain a model for the actin molecule in projection to a resolution of 1.5 nm. The overall dimensions observed in these images are 5.6 x 3.3 x 4.5 nm, and the molecule itself appears distinctly bilobed with the two lobes separated by a cleft. actin monomers in the sheets are arranged with P2 symmetry and are therefore packed in a manner different from that of the molecules in actin filaments. Because approximately 35% of the surface area of the actin molecule is exposed on the surface of these sheets, the sheets should be useful to study the stoichiometric binding of actin-binding proteins to the actin molecule.     

Comparison of the structure of myosin subfragment 1 bound to actin and free in solution. A neutron scattering study using actin made "invisible" by deuteration

The structure of subfragment 1 (S1) bound to F-actin has been compared to the structure of free S1 using neutron scattering. The F-actin was rendered "invisible" to neutrons by selective deuteration and solvent contrast matching. Highly deuterated actin was purified from the slime mold Dictyostelium discoideum, which was fed deuterated Escherichia coli. The properties of this actin were found to be similar to those of protonated actin. The neutron-scattering pattern of S1 bound to this "invisible" actin was compared to that of free S1. At near-physiological ionic strength, a strong interference effect was observed, which arose from pairs of S1 molecules cross-linking actin filaments. However, at low ionic strength the only differences that could be observed were attributed to interference effects between neutrons scattered from S1s bound randomly to equivalent sites on an actin filament. These effects became negligible as the fraction of actin sites occupied by S1 approached zero. Thus, we conclude that the scattering by S1 attached to F-actin is identical with that of free S1, to a resolution of about 2.5 nm. The difference in apparent radii of gyration is less than 0.05 nm. Modeling calculations have been carried out to determine the sensitivity of neutron scattering to possible S1 deformations. The calculations showed that deformations of the structure of S1 that are large enough ultimately to produce a powerstroke of 5 nm or greater are only consistent with the data if they involve at most about 20% of the S1 mass. These results restrict the class of plausible models describing force generation in muscle contraction.     

Self-repairing filamentous actin hydrogel with hierarchical structure

A chemically cross-linked filamentous actin (F-actin) gel consisting of globular actin (G-actin) as repeating units was prepared. The F-actin gel was cross-linked by covalent bonds, and the main chain is represented by the self-assembly of G-actin with a high-ordered hierarchical structure. The gel exhibited good mechanical performance with a storage modulus >1 kPa and undergoes reversible sol-gel transitions in response to changes in the salt concentration (chemical-induced sol-gel transition) as well as to shear strain (mechanical-induced sol-gel transition). Therefore, the gel exhibits self-repairing ability through dynamic polymerization and depolymerization across the structure hierarchies under repeated shear stress.     

Multiple,heterogeneous actin genes in Dictyostelium

We have used an actin gene-containing restriction fragment of plasmid M6 (Kindle and Firtel, 1978) to select a second actin gene-containing plasmid which we have named pDd actin 2. This plasmid has been shown to contain two actin genes separated by 350 bp of nonactin DNA. When heteroduplexes are formed between any two of the three actin genes present in chimeric plasmids, the region of homology is 1100 ± 100 bp. This is close to the minimum length required to code for actin protein. The 1100 bp region of intergene homology corresponds to the 1100 bp homology observed between M6 and the two actin cDNA plasmids pcDd actin B1 and pcDd actin A1 (Bender et al., 1978). We have no evidence for additional sequences common to either the 3′ or 5′ ends of the 1100 ± 100 bp region of intergene homology. Thermal denaturation experiments show that different pairs of actin genes are diverged from each other by as much as 6–8%. There are two size classes of mRNA complementary to the three actin genes. These have lengths of 1.25 and 1.35 kb as determined on methyl mercuric hydroxide-containing agarose gels. The possible linkage of these three actin genes to other actin genes is discussed.     

Occurrence of an actin-inserting domain in tensin.

We have previously described a protein called "insertin" that binds strongly to barbed ends of actin filaments and permits polymerization of actin filaments by insertion of actin monomers between the barbed ends and barbed end-bound insertin. We determined the amino acid sequence of insertin and found that the primary structure of insertin is almost identical to amino acid residues 862 to 1212 of the actin-binding protein tensin.     

Aip1 and cofilin promote rapid turnover of yeast actin patches and cables: a coordinated mechanism for severing and capping filaments

Rapid turnover of actin structures is required for dynamic remodeling of the cytoskeleton and cell morphogenesis, but the mechanisms driving actin disassembly are poorly defined. Cofilin plays a central role in promoting actin turnover by severing/depolymerizing filaments. Here, we analyze the in vivo function of a ubiquitous actin-interacting protein, Aip1, suggested to work with cofilin. We provide the first demonstration that Aip1 promotes actin turnover in living cells. Further, we reveal an unanticipated role for Aip1 and cofilin in promoting rapid turnover of yeast actin cables, dynamic structures that are decorated and stabilized by tropomyosin. Through systematic mutagenesis of Aip1 surfaces, we identify two well-separated F-actin-binding sites, one of which contributes to actin filament binding and disassembly specifically in the presence of cofilin. We also observe a close correlation between mutations disrupting capping of severed filaments in vitro and reducing rates of actin turnover in vivo. We propose a model for balanced regulation of actin cable turnover, in which Aip1 and cofilin function together to "prune" tropomyosin-decorated cables along their lengths. Consistent with this model, deletion of AIP1 rescues the temperature-sensitive growth and loss of actin cable defects of tpm1Delta mutants.     

Annexin-actin interactions

The actin cytoskeleton is a malleable framework of polymerised actin monomers that may be rapidly restructured to enable diverse cellular activities such as motility, endocytosis and cytokinesis. The regulation of actin dynamics involves the coordinated activity of numerous proteins, among which members of the annexin family of Ca2+- and phospholipid-binding proteins play an important role. Although the roles of annexins in actin dynamics are not understood at a mechanistic level, annexins have the requisite properties to integrate Ca2+-signaling with actin dynamics at membrane contact sites. In this review we discuss the current state of knowledge on this topic, and consider how and where annexins may fit into the complex molecular machinery that regulates the actin cytoskeleton.     

Cross-bridge action: present views, prospects, and unknowns

When the sliding filament hypothesis was proposed in 1953-1954, existing evidence showed that (1) contributions to tension were given by active sites uniformly distributed within each zone of filament overlap and (2) each site functioned cyclically. These sites were identified by electron microscopy as cross-bridges between the two filaments, formed of the heads of myosin molecules projecting from a thick filament and attaching to a thin filament. The angle of these cross-bridges was found to be different at rest and in rigor, suggesting that the event causing relative motion of the filaments was a change of the angle of the cross-bridges. At first, it seemed likely that the whole cross-bridge rotated about its attachment to actin, but when the atomic structures of actin and myosin were obtained by X-ray crystallography, a possible hinge was found between the "catalytic domain" which attaches to the actin filament and the "light-chain domain" which appears to act as a lever arm. Two attitudes of the lever arm are now well established, the transition between them being driven by a conformational change coupled to some step in the hydrolysis of ATP, but several recent observations suggest that this is not the whole story: a third attitude has been shown by X-ray crystallography; a non-muscle myosin has been shown to produce its working stroke in two steps; and there are suggestions that an additional displacement of the filaments is produced by a change in the attitude of the catalytic domain on the thin filament.     

Localization and identification of actin structures involved in the filamin-actin interaction.

The interface between gizzard filamin and skeletal muscle actin was located on the actin monomer. Conserved sequences 105-120 and 360-372, in the actin subdomain 1 near the myosin binding sites, were involved in this interaction. The corresponding peptides for these sequences were each found to bind filamin and compete in the actin-filamin interaction. When these two peptides were used together in the presence of filamin and filamentous actin, they dissociated sedimentable complexes formed by these two proteins.     

Flexibility of myosin attachment to surfaces influences F-actin motion.

We have analyzed the dependence of actin filament sliding movement on the mode of myosin attachment to surfaces. Monoclonal antibodies (mAbs) that bind to three distinct sites were used to tether myosin to nitrocellulose-coated glass. One antibody reacts with an epitope on the regulatory light chain (LC2) located at the head-rod junction. The other two react with sites in the rod domain, one in the S2 region near the S2-LMM hinge, and the other at the C terminus of the myosin rod. This method of attachment provides a means of controlling the flexibility and density of myosin on the surface. Fast skeletal muscle myosin monomers were bound to the surfaces through the specific interaction with these mAbs, and the sliding movement of fluorescently labeled actin filaments was analyzed by video microscopy. Each of these antibodies produced stable myosin-coated surfaces that supported uniform motion of actin over the course of several hours. Attachment of myosin through the anti-S2 and anti-LMM mAbs yielded significantly higher velocities (10 microns/s at 30 degrees C) than attachment through anti-LC2 (4-5 microns/s at 30 degrees C). For each antibody, we observed a characteristic value of the myosin density for the onset of F-actin motion and a second critical density for velocity saturation. The specific mode of attachment influences the velocity of actin filaments and the characteristic surface density needed to support movement.     

TetraThymosinbeta is required for actin dynamics in Caenorhabditis elegans and acts via functionally different actin-binding repeats

Generating specific actin structures via controlled actin polymerization is a prerequisite for eukaryote development and reproduction. We here report on an essential Caenorhabditis elegans protein tetraThymosinbeta expressed in developing neurons and crucial during oocyte maturation in adults. TetraThymosinbeta has four repeats, each related to the actin monomer-sequestering protein thymosinbeta 4 and assists in actin filament elongation. For homologues with similar multirepeat structures, a profilin-like mechanism of ushering actin onto filament barbed ends, based on the formation of a 1:1 complex, is proposed to underlie this activity. We, however, demonstrate that tetraThymosinbeta binds multiple actin monomers via different repeats and in addition also interacts with filamentous actin. All repeats need to be functional for attaining full activity in various in vitro assays. The activities on actin are thus a direct consequence of the repeated structure. In containing both G- and F-actin interaction sites, tetraThymosinbeta may be reminiscent of nonhomologous multimodular actin regulatory proteins implicated in actin filament dynamics. A mutation that suppresses expression of tetraThymosinbeta is homozygous lethal. Mutant organisms develop into adults but display a dumpy phenotype and fail to reproduce as their oocytes lack essential actin structures. This strongly suggests that the activity of tetraThymosinbeta is of crucial importance at specific developmental stages requiring actin polymerization.