ULTRASTRUCTURE OF SPOROGENESIS IN A MOSS,DITRICHUM PALLIDUM. III. SPORE WALL FORMATION

Ultrastructural evidence indicates that marked cytoplasmic polarity occurs during wall and aperture ontogeny in spores of the moss (Musci), Ditrchum pallidum (Hedw.) Hampe. Shortly after cytokinesis, an extensive system of microtubules underlies the entire distal spore surface where exine deposition is initiated. These microtubules appear to be focused on the plastid. The apposition of slips nearly of membrane dimension contributes to the forming exine. As the lamellate exine thickens and extends to the proximal surface, the plastid and associated nucleus migrate to the proximal surface where an elaborate system of microtubules involved in aperture development is generated. The exine gradually loses its stratiform character, becoming homogenous and eventually papillate. At maturity, the spore wall consists of four layers, the outermost perine, the exine, a separating layer, and the intine. The aperture is a complex, localized modification of these layers on the proximal surface. It consists of a pore containing a fibrillar material surrounded by a thin annulus.     

Pollen mitosis in the slipper orchid Cypripedium fasciculatum

Pollen mitosis in the slipper orchid Cypripedium fasciculatum was studied using correlated methods of immunofluorescence and transmission electron microscopy. Unlike the more highly evolved orchids, the cypripedioid orchids shed pollen as monosulcate monads. Prior to pollen mitosis, the microspore nucleus migrates to a proximal position opposite the aperture, as is typical of monocotyledons. There is no distinct generative pole microtubule system (GPMS) like that recently reported in development of pollen polarity in the vandoid moth orchid Phalaenopsis. Instead, microtubules in early prophase are concentrated around the nucleus and extend into the cytoplasm toward the future generative pole. Once the nucleus has migrated to the continuous surface opposite the aperture, microtubules surround the nucleus evenly and show no tendency to be more concentrated in the generative domain. The mitotic spindle, which develops from the perinuclear microtubules, is asymmetrically placed in the microspore and is cone-shaped. The generative pole is broad and closely appressed to the continuous spore surface, while the vegetative pole is pointed and located in the interior of the microspore. As the chromosomes move poleward, microtubules proliferate in the interzone and a phragmoplast develops. The phragmoplast expands in a hemispherical path beyond the interzone following an array of microtubules that radiates from the generative nucleus. Data from this study indicate that evolution of pollen in orchids includes a shift in location of the generative cell from proximal to distal and the evolution of a GPMS, in addition in the well-known trend toward increased pollen aggregation and loss of exine.     

Sporoderm development inNymphaea mexicana (Nymphaeaceae)

Mature pollen grains ofNymphaea mexicana have a verrucate proximal surface, a psilate distal surface and an anazonasulculus (encircling-sulcate aperture). The developmental events of microspores and tapetal cells were observed with TEM and SEM. Radially oriented substructural elements are seen in the microspore surface coating ofNymphaea mexicana from the early tetrad stage through the whole exine development. These elements, being the structural units of the microspore surface matrix (glycocalyx), are associated with sporopollenin precursor accumulation. In young free microspores, radially oriented elements are observed at both proximal and distal poles as a palisade between the endexine and plasmalemma.—Several points are discussed: (1) the initial and mature forms of exine substructure elements; (2) the significance of exine substructure for realisation of morphogenetic processes; (3) the ways by which verrucate and psilate sculpture patterns are developed.     

Metal-binding sites in germinating fern spores (Onoclea sensibilis)

Summary During germination of the spore of the sensitive fernOnoclea sensibilis L. the nucleus migrates from a central position to the proximal face and then to one end of the ellipsoidal spore. An asymmetric cell division follows giving rise to a small cell which differentiates immediately into a rhizoid, and a large cell which divides further to give rise to the prothallus. The proximal face of the spore coat is differentiated from the remainder of the spore by its ability to bind nickel ions under certain conditions and by its staining with a sulfide-silver procedure which localizes heavy metals. The inner portion of the exine at the proximal face is differentiated from the outer part by its ability to stain with sulfide-silver at specific periods during germination. The exine at the proximal face also contains pore-like structures 50 nm in diameter which extend from the inner layer of the exine to the outer surface. Sulfide-silver staining material appears to be extruded through the pores at specific periods during germination. The percentage of spores showing nickel-binding and sulfide-silver stainability increases sharply during the first two to four hours of imbibition, then decreases sharply during the following two hours. This is followed by a second rise in staining at 8 to 12 hours of imbibition.The role of the ion-binding sites in the exine is discussed in relation to the stable polarity of the spore.Publishing prior to 1984 asAlix R. Bassel     

Isolation of Allium pollen protoplasts

Studies on protoplasts isolation were carried out with mature pollen grains of 29 samples of species of Allium aflatunense, A. cepa, A. fistulosum, A. karataviense, A. longicuspis, A. nutans, A. odorum, A. sativum and A. schoenoprasum. Surface sterilized pollen grains drifted from crushed anthers were incubated in an enzyme solution containing 1% (w/v) cellulase Onozuka R-10, 1% (w/v) Macerozyme R-10, 0,5 mol l^-1 sucrose and the basal salts of Nitsch medium. Protoplasts were released within 3 to 120 min, either from the pollen grain, through a slightly disturbed germination pore (narrow aperture), or through a wider aperture, when the exine surrounding the germination pore was disturbed. For the first time, protoplasts were obtained from 13 genotypes of 6 Allium species, at a rate of 1 to 30% of the digested intact pollen grains, depending on the genotype.     

Morphogenetic plastid migration and microtubule organization during megasporogenesis inIsoetes

Summary The large megasporocytes ofIsoetes provide an exceptional system for studying microtubule dynamics in monoplastidic meiosis where plastid polarity assures coordination of plastid and nuclear division by the intimate association of MTOCs with plastids. Division and migration of the plastid in prophase establishes the tetrahedrally arranged cytoplasmic domains of the future spore tetrad and the four plastid-MTOCs serve as focal points of a unique quadripolar microtubule system (QMS). The QMS is a dynamic structure which functions in plastid deployment and contributes directly to development of both first and second division spindles. The nucleation of microtubules at discrete plastid-MTOCs is compared with centrosomal nucleation of microtubules in animal cells where growth of microtubules involves dynamic instability.Abbreviations AMS axial microtubule system - MTOC microtubule organizing center - N nucleus - QMS quadripolar microtubule system - P plastid - PPB preprophase band of microtubules     

SPORE WALL FORMATION AND CHLOROPLAST DEVELOPMENT DURING SPOROGENESIS IN THE MOSS FISSIDENS LIMBATUS

The sequence of wall formation in spores of Fissidens limbatus Sullivant is as follows: The exine is formed around the protoplasts after the sporocyte has undergone meiosis. The fully enlarged spores then become coated by the perine; this is followed by intine formation. The source of the intine and exine appears to be from within the spore, but the perine is of an apparent exogenous origin. Ornamentation of the spore is due solely to deposition of the perine. Each spore originally has a single plastid. Plastids increase in number by fission, resulting in mature spores with numerous plastids with well differentiated lamellae.     

Polarity, aperture condition and germination in pollen grains ofEphedra (Gnetales)

Pollen grain polarity, aperture condition and pollen tube formation were examined inEphedra americana, E. foliata, E. rupestris, E. distachya, andE. fragilis using LM, SEM and TEM. In the characteristic oblate pollen, as seen in situ in the tetrad configuration, the polar axis is the minor one and the equatorial plane runs between the two narrow ends of the microspore. The intine is thick in fresh fixed mature pollen but we have seen no indication of regions having an exceptionally thick intine that could be considered associated with an aperture or apertures. About three minutes after transferring fresh pollen to the germinating medium the ridged exine splits and twists away from the intine and its enclosed protoplast. The shed exine spreads out and curls into a scroll-like configuration that is as distinctive as that of the pollen shape had been but now having the ridges and valleys perpendicular to the long axis. The pollen tube develops, in our experience with more than a hundred germinating pollen grains, near one of the narrow tips of the pollen grain's equatorial plane. The location of the pollen tube initiation probably is related to the position of the tube cell nucleus. The pollen tube starts to grow about one hour after the exine was shed. The pollen tube emerges close to the narrow end (equator) of the gametophyte. This end emerged first as the exine is shed and is opposite to the prothallial cells. The stout pollen tube is c. 10µm in diameter grown in vitro on agar. In our germination medium the stout tube continued to elongate for about 24 hours reaching a length of c. 100 µm. With respect to exine morphology the aperture condition could be considered as inaperturate. The pollen tube, however, is formed in a germination area near one end of the exineless gametophyte.     

Development of structure-less pollen wall inCeratophyllum demersum L. (Ceratophyllaceae)

Developmental process of structure-less exine is studied in a hydrophilous plant,Ceratophyllum demersum L., with electron microscopy. The plant shows a characteristic feature in tetrad formation. A callose wall is not synthesized and exine initiation does not occur during the tetrad stage. After release of microspores, a trilaminar layer with two electron-dense lines is formed in the surface of each microspore. The trilaminar layer develops to a thin structure-less exine that is considered to consist of only an endexine. The unusual exine would be an adaptive feature for submersed pollination in fresh water.     

Ultrastructure of meiosis in the mossRhynchostegium serrulatum I. Prophasic microtubules and spindle dynamics

Summary An extensive system of microtubules develops during meiotic prophase in the mossRhynchostegium serrulatum (Hedw.)Jaeg. &Sauerb. Development of the cytoskeleton can be traced to early prophase when the nucleus is acentric and the single plastid divides into four plastids. The cytoskeletal microtubules are associated with equidistant positioning of the four plastids at the distal tetrad poles and with migration of the nucleus to a central position in the sporocyte. The cytoskeleton, which interconnects plastids and encloses the nucleus, contributes to the establishment of moss sporocyte polarity. Just prior to metaphase I evidence of the prophase cytoskeleton is lost as the bipolar metaphase I spindle develops in association with discrete polar organizers located in opposite cleavage furrows between plastids.     

Microtubules and morphogenesis in stomata of the water fernAzolla: An unusual mode of guard cell and pore development

Summary A mature stomate of the water fernAzolla consists of a single apparently unspecialized annular guard cell (GC) with two nuclei surrounding an elongated pore aligned longitudinally in the leaf. During development, the guard mother cell develops a preprophase band (PPB) of microtubules (MTs) oriented transverse to the leaf axis. This is followed by a cell plate which fuses with the parental walls at the PPB site. Subsequently only the central part of the cell plate is consolidated, while the parts to either side become perforated and tenuous and may disperse completely, forming a single composite GC.Meanwhile, a dense array of MTs appears along both faces of the central part of the new wall, oriented normal to the leaf surface. Further MT arrays radiate out across the periclinal walls from the region of the consolidated cell plate. Putative MT nucleating sites are seen along the cell edges between these anticlinal and periclinal arrays. Polarized light microscopy reveals cellulose deposition parallel to the periclinal MT arrays. At the same time lamellar material is deposited within the new anticlinal wall. As the GC complex elongates, a split appears in these lamellae creating an initially transverse slit which then opens up to become first circular and ultimately an elongated pore aligned in the long axis of the leaf,i.e., at right angles to the wall in which it originated. The radiating pattern of cellulose microfibrils in the periclinal walls contributes to the shaping of the pore. Elongation at the apical and basal ends of the GC is restricted by longitudinal microfibril orientation, while that at the sides is facilitated by transverse alignment.     

SPORE WALL DEVELOPMENT IN ANDREAEA (MUSCI: ANDREAEOPSIDA)

The spore wall of Andreaea rothii (Andreaeopsida) is unique among mosses studied by transmission electron microscopy. The exine of other mosses is typically initiated on trilaminar structures of near unit membrane dimensions just outside the plasma membrane. The exine of Andreaea is initiated in the absence of such structures as discrete globules within the coarsely fibrillar network of the sporocyte wall. The sequence of wall layer development, nevertheless, is essentially like that of other mosses. The intine is deposited within the exine and the perine accumulates on the surface of the exine during the latter stages of spore maturation. The mature spore is weakly trilete and inaperturate. The wall consists of three layers, the inner intine, the spongy exine consisting of loosely compacted irregular globules of sporopollenin, and an outer layer of perine. The perine differs ultrastructurally from the exine only in its greater degree of electron opacity. This ultrastructural evidence of departure from the fundamental pattern of exine development in mosses supports the taxonomic isolation of Andreaea from mosses of the Sphagnopsida and Bryopsida.     

Pollen evolution and systematics inAnnonaceae with special reference to the disulcate Australian endemic genera

All genera ofAnnonaceae endemic in Australia (Ancana, Fitzalania, Haplostichanthus) show almost exactly the same type of disulcate (disulculate) pollen with intact exine extending over the sulci. Tetrad stages inHaplostichanthus andAncana reveal a latudinal subequatiorial orientation of the two sulci at the proximal hemisphere. Sometimes they fuse into a ±zonosulcate aperture.Fissistigma pollen grains are ±globose and have a flattened pole with a central elevation and a concentric groove, covered by a somewhat reduced exine. This palynological characters give further support for separating the generaAncana andFissistigma. Germination was observed inHaplostichanthus where the pollen tube emerges at one of the two sulci and inFissistigma where the flattened part breaks up during germination. The aperture types described here are obviously transitional stages between aperturate and inaperturate pollen grains and are discussed in regard to pollen evolution.     

Ultrastructure of the spore in four Japanese species of Ptychomitrium Fürnr. (Musci)

The ultrastructure of the mature spore in four Japanese species of the acrocarpous moss genus Ptychomitrium is presented. In all species the spores have a similar pattern: there is no recognisable aperture nor sporoderm polarity, exine and perine are poorly developed, cytoplasm only occasionally shows polarity, and plastids have a well developed inner membrane system. The presence of frequent intine protrusions is a remarkable feature of this genus. A multilaminar structure of the exine, already observed in Grimmia, occurs also in these species although here it is less pronounced. The significance of these features is discussed within these species, as well as in comparison to other taxa, especially the genus Grimmia.     

A route for the passage of substances through the developing pteridophyte exine

Summary The developing exine ofLycopodium gnidioides is traversed from the outer to the inner surface by a series of anastomosing channels filled or lined with fibrillar glycoprotein. When living sporangia are incubated in colloidal iron, particles of ferric iron can be detected in the exine channels, the intine and the spore cytoplasm, and some iron is retained by the surface coatings on the spore. Although there is some diffuse iron staining of the exine between the channels, the main concentration of particles is associated with these structures. This, together with the fact that the proximal lasurae of the spore are closed during development, is taken as evidence that the iron has passed from the locular fluid to the surface of the protoplast principally by way of the exine channels. Results obtained from fixation in a glutaraldehyde-lanthanum nitrate mixture support this interpretation. While the exine channels are in existence, therefore, the spore protoplast is in open communication with the locular environment. The study provides no evidence to suggest that the iron which entered the spore cytoplasm did so by endocytosis. It is possible that iron altered the permeability of the plasma membrane by damaging its structure; entry of iron to the cytoplasm being effected through the damaged membrane.     

Annulus-pore relationship in Gramineae (Poaceae) pollen: the pore margin of Pariana

Pariana, a primitive bamboo, is the only genus in the Gramineae (Poaceae) to have pollen grains without an annulus as part of its single aperture (porate) system. In contrast, the markedly thickened exine layer underlying the pore margin is similar to counterparts in all grass genera. Components of the future annulus in Gramineae pollen develop toward the cytoplasm (proximally) and begin to be pressed outward by an increase in the cytoplasm during the microspore vacuolate stage, culminating in an annulus by maturity. However, in some species of Pariana these components are either not sufficiently developed or the cytoplasmic expansion is not sufficient to press the components into an annular ring around the pore. The structural relationship of exine layering in this type of pollen grain in Gramineae and other families with similar apertures has not hitherto been extensively studied. A critical examination of the apertures in bambusoid grasses may clarify their systematic position within the Gramineae.     

Plastid polarity and meiotic spindle development in microsporogenesis ofSelaginella

Summary Microsporogenesis inSelaginella was studied by fluorescence light microscopy and transmission electron microscopy. As in other examples of monoplastidic meiosis the plastids are involved in determination of division polarity and organization of microtubules. However, there are important differences: (1) the meiotic spindle develops from a unique prophase microtubule system associated with two plastids rather than from a typical quadripolar microtubule system associated with four plastids; (2) the division axes for first and second meiotic division are established sequentially, whereas as in all other cases the poles of second division are established before those of first division; and (3) the plastids remain in close contact with the nucleus throughout meiotic prophase and provide clues to the early determination of spindle orientation. In early prophase the single plastid divides in the plane of the future division and the two daughter plastids rotate apart until they lie on opposite sides of the nucleus. The procytokinetic plate (PCP) forms in association with the two slender plastids; it consists of two spindle-shaped microtubule arrays focused on the plastid tips with a plate of vesicles at the equatorial region and a picket row of microtubules around one side of the nucleus. Second plastid division occurs just before metaphase and the daughter plastids remain together at the spindle poles during first meiotic division. The meiotic spindle develops from merger of the component arrays of the PCP and additional microtubules emanating from the pair of plastid tips located at the poles. After inframeiotic interphase the plastids migrate to tetrahedral arrangement where they serve as poles of second division.Abbreviations AMS axial microtubule system - FITC fluorescein isothiocyanate - MTOC microtubule organizing center - PCP procytokinetic plate - QMS quadripolar microtubule system - TEM transmission electron microscope (microscopy)     

Ultrastructural Studies on the Microconidia of Botrytis cinerea Pers. and their Phialoconidial Development

The genesis and ultrastructure of microconidia of Botrytis cinerea Pers. were studied, using TEM and SEM. Microconidia are produced in flask-shaped, terminal or lateral phialides. The first microconidium develops holoblastically, subsequent microconidia are formed enteroblastically, in basipetal succession from a fixed conidiogenous locus. Mature microconidia are characterized by a two-layered spore wall covered by mucilage, a single, sickle-shaped nucleus, one or two large lipid bodies, a few mitochondria of the cristae-type, ribosomes, sparse endoplasmatic reticulum close to the plasmalemma and a small amount of cytoplasma. The basal septum which is surrounded by a collar-like rim is perforated by a simple central pore with a pore plug. Differences in genesis and ultrastructure of microconidia compared with macroconidia are discussed in relation to the function of these two spore types.     

Neck region of gerbil spermatozoa

In the course of the reorganization and degeneration of the proximal centriole in the mature acentriolate spermatozoon of the Mongolian gerbil, both the proximal and distal centrioles appear in the early cap phase of spermatid development. During the acrosome phase, both distal and proximal centrioles become highly active in the formation of a segmented column. The proximal centriole becomes actively involved in the formation of the capitulum, while the distal centriole forms the axonemal complex and dense fibers. During the maturation phase of spermatid development, the “pinwheel” arrangement of the proximal centriole becomes an “S”-shaped structure, turned 90° on its vertical axis. The few “doublet” microtubules that can be detected later in that stage completely disappear during spermiation. The distal centriolar area develops a single central pair of microtubules and membranous elements. Another prominent feature in the neck region of the gerbil spermatozoa is the presence of two dense rudimentary columns in association with the mitochondria. Although their density is similar to that of the other columns, these two columns have no connection with the dense fibers; in fact, they are closely associated with the mitochondria.     

AN ULTRASTRUCTURAL STUDY OF SPORE WALL MORPHOGENESIS IN EQUISETUM ARVENSE

Spore wall morphogenesis of Equisetum arvense was observed by transmission electron microscopy. The spore wall of E. arvense consists of four layers: intine, exine, middle layer, and elater. The exine is formed after meiosis and consists of two distinct layers. The inner portion of the exine is formed in advance of the outer layer of the exine. The middle layer is deposited after the exine. The elater can be subdivided into two distinct layers. The inner layer comprises longitudinal microfibrils that surround the spore in spiral fashion. The elater appears as thin beltlike structures at the beginning of development. Numerous microtubules were observed on the inner surface of the plasmodial plasma membrane opposite the inner layer of the elater, suggesting that these microtubules are involved with the synthesis of inner elater microfibrils. The matrix of the outer elater is formed by discharge of granules from the plasmodial cytoplasm. The intine is the last component of the sporoderm to be formed.