CsgA production by Escherichia coli O157:H7 alters attachment to abiotic surfaces in some growth environments

The role of curli expression in attachment of Escherichia coli O157:H7 to glass, Teflon, and stainless steel (SS) was investigated through the creation of csgA knockout mutants in two isolates of E. coli O157:H7. Attachment assays using epifluorescence microscopy and measurements of the force of adhesion of bacterial cells to the substrates using atomic force microscopy (AFM) force mapping were used to determine differences in attachment between wild-type (wt) and csgA-negative (ΔcsgA) strains following growth in four different media. The hydrophobicity of the cells was determined using contact angle measurements (CAM) and bacterial adhesion to hydrocarbons (BATH). The attachment assay results indicated that ΔcsgA strains attached to glass, Teflon, and SS surfaces in significantly different numbers than their wt counterparts in a growth medium-dependent fashion (P < 0.05). However, no clear correlation was seen between attachment numbers, surface type, or growth medium. No correlation was seen between BATH and CAM results (R(2) < 0.70). Hydrophobicity differed between the wt and ΔcsgA in some cases in a growth medium- and method-dependent fashion (P < 0.05). AFM force mapping revealed no significant difference in the forces of adhesion to glass and SS surfaces between wt and ΔcsgA strains (P > 0.05) but a significantly greater force of adhesion to Teflon for one of the two wt strains than for its ΔcsgA counterpart (P < 0.05). This study shows that CsgA production by E. coli O157:H7 may alter attachment behavior in some environments; however, further investigation is required in order to determine the exact relationship between CsgA production and attachment to abiotic surfaces.     

Effect of curli expression and hydrophobicity of Escherichia coli O157:H7 on attachment to fresh produce surfaces

Aim: To investigate the effect of curli expression on cell hydrophobicity, biofilm formation and attachment to cut and intact fresh produce surfaces. Methods and Results: Five Escherichia coli O157:H7 strains were evaluated for curli expression, hydrophobicity, biofilm formation and attachment to intact and cut fresh produce (cabbage, iceberg lettuce and Romaine lettuce) leaves. Biofilm formation was stronger when E. coli O157:H7 were grown in diluted tryptic soy broth (1 : 10). In general, strong curli‐expressing E. coli O157:H7 strains 4406 and 4407 were more hydrophobic and attached to cabbage and iceberg lettuce surfaces at significantly higher numbers than other weak curli‐expressing strains. Overall, E. coli O157:H7 populations attached to cabbage and lettuce (iceberg and Romaine) surfaces were similar (P > 0·05), indicating produce surfaces did not affect (P < 0·05) bacterial attachment. All E. coli O157:H7 strains attached rapidly on intact and cut produce surfaces. Escherichia coli O157:H7 attached preferentially to cut surfaces of all produce types; however, the difference between E. coli O157:H7 populations attached to intact and cut surfaces was not significant (P > 0·05) in most cases. Escherichia coli O157:H7 attachment and attachment strength (S_R) to intact and cut produce surfaces increased with time. Conclusions: Curli‐producing E. coli O157:H7 strains attach at higher numbers to produce surfaces. Increased attachment of E. coli O157:H7 on cut surfaces emphasizes the need for an effective produce wash to kill E. coli O157:H7 on produce. Significance and Impact of the Study: Understanding the attachment mechanisms of E. coli O157:H7 to produce surfaces will aid in developing new intervention strategies to prevent produce outbreaks.     

Analyses of the red-dry-rough phenotype of an Escherichia coli O157:H7 strain and its role in biofilm formation and resistance to antibacterial agents

In a previous study, we identified Congo red-binding and -nonbinding phase variants of Escherichia coli serotype O157:H7 strain ATCC 43895. The Congo red-binding variant, strain 43895OR, produced a dry, aggregative colony that was similar to the red, dry, and rough (rdar) phenotype characteristic of certain strains of Salmonella. In contrast, variant 43895OW produced a smooth and white colony morphology. In this study, we show that, similar to rdar strains of Salmonella enterica serovar Typhimurium, strain 43895OR forms large aggregates in broth cultures, firm pellicles at the air-medium interface on glass, and dense biofilms on glass and polystyrene. However, unlike S. enterica serovar Typhimurium, strain 43895OR does not stain positive for cellulose production. When strain 43895OR was fixed on agar, scanning electron microscopy showed cells expressing extracellular matrix (ECM) containing curli fibers. Strain 43895OW was devoid of any ECM or curli fibers on agar but showed expression of curli fibers during attachment to glass. Strain 43895OR produced >4-fold-larger amounts of biofilm than strain 43895OW on polystyrene, glass, stainless steel, and Teflon; formation was >3-fold higher in rich medium than in nutrient-limited medium. Biofilm-associated cells of both strains showed statistically greater resistance (P < 0.05) to hydrogen peroxide and quaternary ammonium sanitizer than their respective planktonic cells. This study shows that the rdar phenotype of E. coli O157:H7 strain 43895OR is important in multicellular growth, biofilm formation, and resistance to sanitizers. However, the lack of cellulose production by strain 43895OR indicates important differences in the ECM composition compared to that of Salmonella.     

Curli fibers are required for development of biofilm architecture in Escherichia coli K-12 and enhance bacterial adherence to human uroepithelial cells

Sessile bacteria show phenotypical, biochemical, and morphological differences from their planktonic counterparts. Curli, extracellular structures important for biofilm formation, are only produced at temperatures below 30 C in Escherichia coli K-12 strains. In this report, we show that E. coli K-12 can produce curli at 37 C when grown as a biofilm community. The curli-expressing strain formed more biofilms on polyurethane sheets than the curli-deficient strain under growth temperatures of both 25 C and 37 C. Curli are required for the formation of a three-dimensional mature biofilm, with characteristic water channels and pillars of bacteria. Observations by electron microscopy revealed the presence at the surfaces of the curli-deficient mutant in biofilm of flagella and type I pili. A wild-type curli-expressing E. coli strain significantly adhered to several lines of human uroepithelial cells, more so than an isogenic curlideficient strain. The finding that curli are expressed at 37 C in biofilm and enhance bacterial adherence to mammalian host cells suggests an important role for curli in pathogenesis.     

Biofilm formation by Escherichia coli O157:H7 on stainless steel: effect of exopolysaccharide and Curli production on its resistance to chlorine

The resistance of Escherichia coli O157:H7 strains ATCC 43895-, 43895-EPS (an exopolysaccharide [EPS]-overproducing mutant), and ATCC 43895+ (a curli-producing mutant) to chlorine, a sanitizer commonly used in the food industry, was studied. Planktonic cells of strains 43895-EPS and/or ATCC 43895+ grown under conditions supporting EPS and curli production, respectively, showed the highest resistance to chlorine, indicating that EPS and curli afford protection. Planktonic cells (ca. 9 log(10) CFU/ml) of all strains, however, were killed within 10 min by treatment with 50 microg of chlorine/ml. Significantly lower numbers of strain 43895-EPS, compared to those of strain ATCC 43895-, attached to stainless steel coupons, but the growth rate of strain 43895-EPS on coupons was not significantly different from that of strain ATCC 43895-, indicating that EPS production did not affect cell growth during biofilm formation. Curli production did not affect the initial attachment of cells to coupons but did enhance biofilm production. The resistance of E. coli O157:H7 to chlorine increased significantly as cells formed biofilm on coupons; strain ATCC 43895+ was the most resistant. Population sizes of strains ATCC 43895+ and ATCC 43895- in biofilm formed at 12 degrees C were not significantly different, but cells of strain ATCC 43895+ showed significantly higher resistance than did cells of strain ATCC 43895-. These observations support the hypothesis that the production of EPS and curli increase the resistance of E. coli O157:H7 to chlorine.     

Attachment and biofilm formation on stainless steel by Escherichia coli O157:H7 as affected by curli production

AIMS: The aim of this study was to determine the role of curli in attachment and biofilm formation by Escherichia coli O157:H7 on stainless steel. METHODS AND RESULTS: Three curli-deficient strains (43895-, 43894- and E0018-) and three curli over-producing strains (43895+, 43894+ and E0018+) of E. coli O157:H7 were studied. Stainless steel coupons (SSC) were immersed in cell suspensions of each strain for 24 h at 4 degrees C. The number of cells attached to SSC was determined. To determine the ability of attached cells to form biofilm, SSC were immersed in 10% of tryptic soya broth up to 6 days at 22 degrees C. Curli-deficient and curli-producing strains did not differ in their ability to attach to SSC, but only curli-producing strains formed biofilms. CONCLUSIONS: Curli production by E. coli O157:H7 does not affect attachment of cells on stainless steel but curli-producing strains are better able to form biofilms. SIGNIFICANCE AND IMPACT OF THE STUDY: Curli production by E. coli O157:H7 enhances its ability to form biofilm on stainless steel, thereby potentially resulting in increased difficulty in removing or killing cells by routine cleaning and sanitizing procedures used in food-processing plants.     

Characterisation of Curli Production, Cell Surface Hydrophobicity, Autoaggregation and Attachment Behaviour of Escherichia coli O157

Escherichia coli O157 are an important group of foodborne pathogens with the ability to attach to materials commonly used in food processing environments such as slightly hydrophilic stainless steel. The aim of this study was to characterise six E. coli isolates, including five E. coli O157, for curli production, autoaggregation, hydrophobicity and attachment to highly hydrophilic glass and hydrophobic Teflon^®. Curli production and autoaggregation were determined using absorbance assays; hydrophobicity by bacterial adherence to hydrocarbons, hydrophobic interaction chromatography and contact angle measurements; and attachment using epifluorescence microscopy. Curli production varied between strains and for some strains correlated with autoaggregation. Curli production correlated with decreased hydrophobicity for two strains. Four of the six isolates increased attachment to glass, but decreased attachment to Teflon^® with increased curli production. In contrast, one of the six isolates decreased attachment to glass, but increased attachment to Teflon^® with increasing curli production. Curli production by the remaining isolate did not correlate with hydrophobicity or attachment. Attachment of some E. coli, including E. coli O157, to abiotic surfaces may be influenced by curli production, autoaggregation and hydrophobicity. However, for other strains, a variety of factors may be of greater influence on these properties and ability to attach to abiotic surfaces. This study highlights the complexity of bacterial surface properties and their relationship with bacterial attachment.     

Analyses of the Red-Dry-Rough Phenotype of an Escherichia coli O157:H7 Strain and Its Role in Biofilm Formation and Resistance to Antibacterial Agents

In a previous study, we identified Congo red-binding and -nonbinding phase variants of Escherichia coli serotype O157:H7 strain ATCC 43895. The Congo red-binding variant, strain 43895OR, produced a dry, aggregative colony that was similar to the red, dry, and rough (rdar) phenotype characteristic of certain strains of Salmonella. In contrast, variant 43895OW produced a smooth and white colony morphology. In this study, we show that, similar to rdar strains of Salmonella enterica serovar Typhimurium, strain 43895OR forms large aggregates in broth cultures, firm pellicles at the air-medium interface on glass, and dense biofilms on glass and polystyrene. However, unlike S. enterica serovar Typhimurium, strain 43895OR does not stain positive for cellulose production. When strain 43895OR was fixed on agar, scanning electron microscopy showed cells expressing extracellular matrix (ECM) containing curli fibers. Strain 43895OW was devoid of any ECM or curli fibers on agar but showed expression of curli fibers during attachment to glass. Strain 43895OR produced >4-fold-larger amounts of biofilm than strain 43895OW on polystyrene, glass, stainless steel, and Teflon; formation was >3-fold higher in rich medium than in nutrient-limited medium. Biofilm-associated cells of both strains showed statistically greater resistance (P < 0.05) to hydrogen peroxide and quaternary ammonium sanitizer than their respective planktonic cells. This study shows that the rdar phenotype of E. coli O157:H7 strain 43895OR is important in multicellular growth, biofilm formation, and resistance to sanitizers. However, the lack of cellulose production by strain 43895OR indicates important differences in the ECM composition compared to that of Salmonella.     

Giardia lamblia attachment force is insensitive to surface treatments

Giardia lamblia cell populations show 90% detachment from glass under normal forces of 2.43+/-0.33 nN applied by centrifugation. Detachment forces were not significantly different for cells attached to positively charged, hydrophobic, or inert surfaces than for cells attached to plain glass. The insensitivity of attachment force to surface treatment is consistent with a suction-based mechanism of attachment.     

Influence of substratum hydration and adsorbed macromolecules on bacterial attachment to surfaces

The attachment of Pseudomonas fluorescens and an Acinetobacter sp. to hydrogel and polystyrene surfaces was investigated to evaluate the influence of adsorbed water and macromolecules on adhesion. With both organisms, there was a decrease in attachment numbers with increasing water content of the hydrogels. There was also a decrease in attachment with a decrease in water contact angle on untreated, tissue culture and sulfonated polystyrene surfaces; however, the attachment numbers were higher than would be expected on the basis of the hydrogel data. With P. fluorescens, attachment to untreated and tissue culture polystyrene was inhibited by bovine serum albumin, Escherichia coli lipopolysaccharide, and the supernatant from spent medium, both when the conditioning substances were added to the suspension of attaching cells and when they were preadsorbed onto the surfaces. Dextran inhibited attachment only when added to the bacterial suspension. Supernatants from centrifuged natural freshwater samples had no effect. Thus, hydration of a surface and the adsorption of macromolecules can reduce bacterial attachment; however, additional factors relating to the chemical composition of the substratum and polymeric stabilization of suspended cells can affect the adhesion interaction and resultant numbers of attached cells.     

The role of disulfide bond isomerase A (DsbA) of Escherichia coli O157:H7 in biofilm formation and virulence

The role of periplasmic disulfide oxidoreductase DsbA in Shiga toxin-producing Escherichia coli O157:H7 (STEC) was investigated. Deletion of dsbA (DeltadsbA) significantly decreased cell motility and alkaline phosphatase activity in STEC. STEC DeltadsbA also showed greater sensitivity to menadione and under low pH conditions. Significant reductions in surface attachment to both biotic (HT-29 epithelial cells) and abiotic (polystyrene and polyvinyl chloride) surfaces were observed in STEC DeltadsbA. In addition, no biofilm formation was detected in STEC DeltadsbA compared to wild-type cells in glass capillary tubes under continuous flow-culture system conditions. In the nematode model Caenorhabditis elegans-killing assay, the deletion of dsbA in STEC resulted in attenuated virulence compared to wild-type cells. STEC DeltadsbA was also found to have a reduced ability to colonize the nematode gut. These results suggest that DsbA plays important roles in biofilm formation and virulence in STEC cells.     

Adhesion and colonization of enterohemorrhagic Escherichia coli O157:H7 in cecum of mice

Infectious diseases due to enterohemorrhagic Escherichia coli (EHEC) are characterized by diarrhea, hemorrhagic colitis and hemolytic uremic syndrome. The adherence of EHEC on intestinal epithelial cells is a first step for developing these diseases. In the present study, we examined whether EHEC O157:H7 adhere to intestinal epithelial cells of mice and cause F-actin accumulation in the epithelial cells following the intragastric inoculation of the pathogen. Fecal shedding of the EHEC O157:H7 strain was observed in ICR mice up to 3 weeks. Fecal shedding periods of the type III secretion system-related gene (espA and sepL) deletion mutants were clearly shorter than that of the wild-type EHEC O157:H7 strain. The EHEC O157:H7 colonies were found on the epithelial surfaces of the ceca in association with F-actin accumulation beneath the attached bacteria.     

Influence of Substratum Characteristics on the Attachment of a Marine Pseudomonad to Solid Surfaces

The attachment of a marine Pseudomonas sp. to a variety of surfaces was investigated, and the number of bacteria which became attached was related to the surface charge and degree of hydrophobicity of the substratum. Large numbers of bacteria attached to hydrophobic plastics with little or no surface charge [Teflon, polyethylene, polystyrene, poly(ethylene terephthalate)]; moderate numbers attached to hydrophilic metals with a positive (platinum) or neutral (germanium) surface charge; and very few attached to hydrophilic, negatively charged substrata (glass, mica, oxidized plastics). The results suggest that both electrostatic and hydrophobic interactions are involved in bacterial attachment.     

Laboratory studies on adhesion of microalgae to hard substrates

Adhesion of Chlorella vulgaris(chlorophyceae), Nitzschia amphibia(bacillariophceae) and Chroococcus minutus(cyanobacteria) to hydrophobic (perspex, titanium and stainless steel 316-L), hydrophilic (glass) and toxic (copper, aluminium brass and admiralty brass) substrata were studied in the laboratory. The influence of surface wettability, surface roughness, pH of the medium, culture age, culture density, cell viability and presence of organic and bacterial films on the adhesion of Nitzschia amphibia was also studied using titanium, stainless steel and glass surfaces. All three organisms attached more on titanium and stainless steel and less on copper and its alloys. The attachment varied significantly with respect to exposure time and different materials. The attachment was higher on rough surfaces when compared to smooth surfaces. Attachment was higher on pH 7 and above. The presence of organic film increased the attachment significantly when compared to control. The number of attached cells was found to be directly proportional to the culture density. Attachment by log phase cells was significantly higher when compared to stationary phase cells. Live cells attached more when compared to heat killed and formalin killed cells. Bacterial films of Pseudomonas putida increased the algal attachment significantly. %     

Biofilm Formation by Escherichia coli O157:H7 on Stainless Steel: Effect of Exopolysaccharide and Curli Production on Its Resistance to Chlorine

The resistance of Escherichia coli O157:H7 strains ATCC 43895-, 43895-EPS (an exopolysaccharide [EPS]-overproducing mutant), and ATCC 43895+ (a curli-producing mutant) to chlorine, a sanitizer commonly used in the food industry, was studied. Planktonic cells of strains 43895-EPS and/or ATCC 43895+ grown under conditions supporting EPS and curli production, respectively, showed the highest resistance to chlorine, indicating that EPS and curli afford protection. Planktonic cells (ca. 9 log₁₀ CFU/ml) of all strains, however, were killed within 10 min by treatment with 50 μg of chlorine/ml. Significantly lower numbers of strain 43895-EPS, compared to those of strain ATCC 43895-, attached to stainless steel coupons, but the growth rate of strain 43895-EPS on coupons was not significantly different from that of strain ATCC 43895-, indicating that EPS production did not affect cell growth during biofilm formation. Curli production did not affect the initial attachment of cells to coupons but did enhance biofilm production. The resistance of E. coli O157:H7 to chlorine increased significantly as cells formed biofilm on coupons; strain ATCC 43895+ was the most resistant. Population sizes of strains ATCC 43895+ and ATCC 43895- in biofilm formed at 12°C were not significantly different, but cells of strain ATCC 43895+ showed significantly higher resistance than did cells of strain ATCC 43895-. These observations support the hypothesis that the production of EPS and curli increase the resistance of E. coli O157:H7 to chlorine.     

Lactic acid bacteria biofilms and their ability to mitigate Escherichia coli O157:H7 surface colonization

Lactic acid bacteria (LAB) exert antagonistic activities against diverse microorganisms, including pathogens. In this work, we aimed to investigate the ability of LAB strains isolated from food to produce biofilms and to inhibit growth and surface colonization of Enterohaemorrhagic Escherichia coli (EHEC) O157:H7 at 10°C. The ability of 100 isolated LAB to inhibit EHEC O157:H7 NCTC12900 growth was evaluated in agar diffusion assays. Thirty-seven LAB strains showed strong growth inhibitory effect on EHEC. The highest inhibitory activities corresponded to LAB strains belonging to Lactiplantibacillus plantarum, Pediococcus acidilactici and Pediococcus pentosaceus species. Eighteen out of the 37 strains that showed growth inhibitory effects on EHEC also had the ability to form biofilms on polystyrene surfaces at 10°C and 30°C. Pre-established biofilms on polystyrene of four of these LAB strains were able to reduce significantly surface colonization by EHEC at low temperature (10°C). Among these four strains, Lact. plantarum CRL 1075 not only inhibited EHEC but also was able to grow in the presence of the enteric pathogen. Therefore, this strain proved to be a good candidate for further technological studies oriented to its application in food-processing environments to mitigate undesirable surface contaminations of E. coli.     

Effects of DNP on the cell surface properties of marine bacteria and its implication for adhesion to surfaces

The effect of 2, 4-dinitrophenol (DNP) on the extracelluar polysaccharides (EPS), cell surface charge, and the hydrophobicity of six marine bacterial cultures was studied, and its influence on attachment of these bacteria to glass and polystyrene was evaluated. DNP treatment did not influence cell surface charge and EPS production, but had a significant effect on hydrophobicity of both hydrophilic (p = 0.05) and hydrophobic (p = 0.01) cultures. Significant reduction in the attachment of all the six cultures to glass (p = 0.02) and polystyrene (p = 0.03) was observed after DNP treatment. Moreover, hydrophobicity but not the cell surface charge or EPS production influenced bacterial cell attachment to glass and polystyrene. From this study, it was evident that DNP treatment influenced bacterial cell surface hydrophobicity, which in turn, reduced bacterial adhesion to surfaces.