Analysis of particle bombardment parameters to optimise DNA delivery into wheat tissues

 The objective of this study was to identify the major parameters controlling DNA delivery by particle bombardment to wheat (Triticum aestivum L.) scutellum and inflorescence tissue. The main factors studied were the DNA/gold precipitation process, bombardment parameters and tissue culture variables. Efficiency of DNA (uidA gene) delivery was assessed by scoring transient GUS expression in bombarded tissues. Of the parameters analysed, amount of plasmid DNA, spermidine concentration, presence of Ca⁺⁺ ions, calcium chloride concentration, amount of gold particles, gold particle size, acceleration pressure, chamber vacuum pressure, bombardment distance, osmotic conditioning of tissues and type of auxin had a clear influence on transient gene expression. A bombardment procedure suitable for elite wheat varieties was developed which allowed high-efficiency DNA delivery combined with reduced damage to target tissues. Received: 6 May 1998 / Revision received: 10 August 1998 / Accepted: 2 February 1999     

Optimised DNA delivery into Coffea arabica suspension culture cells by particle bombardment

An optimised bombardment protocol to introduce DNA into Coffea arabica suspension culture cells was developed. Osmotic preconditioning of cells and physical bombardment parameters including Helium pressure, gap and target distances affecting DNA delivery were evaluated by monitoring transient expression of the uidA gene driven by the CaMV35S promoter. The highest transient GUS expression was obtained when cells were subjected to a 0.5 M mannitol–sorbitol pre-treatment 4 h prior to bombardment and a Helium pressure of 1550 psi, a 9-mm gap distance and 12 cm target distance as physical bombardment parameters. The optimised protocol was tested with two coffee promoters: -tubulin and arabicin, which presented similar activity to the CaMV35S promoter in suspension culture cells by fluorometric GUS assays. GUS expression was reduced in bombarded tissue culture leaves, and only the CaMV35S and arabicin promoters showed histochemical activity in coffee endosperms. This is the first report of optimization of particle bombardment on coffee suspension culture cells, equivalent CaMV35S activity for a coffee promoter and transient -glucoronidase expression in coffee endo-sperms.     

DNA delivery into Eucalyptus globulus zygotic embryos through biolistics: optimization of the biological and physical parameters of bombardment for two different particle guns

Summary DNA transfer into zygotic embryos of Eucalyptus globulus by microprojectile bombardment was studied with two devices: a gunpowder apparatus and a compressed-helium system. Using, as a test, the transient expression of a reporter gene, we optimized the physical and biological conditions of bombardment. Six-day-old cultured embryos were found to be the best target material, and osmotic treatment increased the expression rate. Conditions of bombardment (particle acceleration and quality of the particle: DNA mix) were studied. In optimal conditions, we were able to obtain up to 130 GUS expression events per embryo with a good distribution over the tissue.In our transient expression experiments, the gunpowder and helium devices exhibited similar efficiencies, reliabilities and reproducibilities.Abbreviations GUS -glucuronidase - 2,4-D 2,4-dichlorophenoxyacetic acid     

Factors affecting gene delivery by particle bombardment ofDendrobium orchids

Summary Five parameters were examined for their effect on transformation ofDendrobium tissues by microprojectile bombardment. The superpromoter in pBI426 produced at least 1.5 times as many transient transformants as the single cauliflower mosaic virus 35S promoter in pBI121 (37 to 69% vs. 0 to 44%) with dark and frequent GUS (β-glucuronidase) staining. Tissue, genotype, and type of microparticle significantly affected transient GUS activity. Higher expression was seen in protocormlike bodies and in hybrid UH44 compared to etiolated shoots and protocorms and to hybrids M61 and K1329-39. Microparticles of 1.6-μm Bio-Rad gold were more effective than 1.0-μm ASI gold. Transient GUS activity did not differ among protocormlike bodies bombarded using helium propellant pressures of 650, 900, or 1100 psi. Transgenic plants were recovered fromDendrobium UH800 protocormlike bodies bombarded with pBI426-coated, 1.1-μm tungsten particles using an early-model gunpowder-driven apparatus with an estimated stable transformation rate of 11.7%. One transgenic plant ofDendrobium UH44 was recovered from etiolated shoot explants bombarded with pBI121-coated, 1.1-μm tungsten particles using the Dupont PDS-1000 with a stable transformation rate of 0.17%. Positive selection results showed 100 to 200 mg·liter⁻¹ kanamycin to be appropriate for regeneration of transgenic plants from protocormlike bodies, protocorms, and etiolated shoot explants over a 3- to 9.5-mo. period.     

Optimization of delivery of foreign DNA into higher-plant chloroplasts

We report here an efficient and highly reproducible delivery system, using an improved biolistic transformation device, that facilitates transient expression of -glucuronidase (GUS) in chloroplasts of cultured tobacco suspension cells. Cultured tobacco cells collected on filter papers were bombarded with tungsten particles coated with pUC118 or pBI101.3 (negative controls), pBI505 (positive nuclear control) or a chloroplast expression vector (pHD203-GUS), and were assayed for GUS activity. No GUS activity was detected in cells bombarded with pUC118 or pBI101.3. Cells bombarded with pBI505 showed high levels of expression with blue color being distributed evenly throughout the whole cytosol of the transformants. pHD203-GUS was expressed exclusively in chloroplasts. We base this conclusion on: i) the procaryotic nature of the promoter used in the chloroplast expression vector; ii) delayed GUS staining; iii) localization of blue color within subcellular compartments corresponding to plastids in both shape and size; and iv) confirmation of organelle-specific expression of pHD203-GUS using PEG-mediated protoplast transformation. Chloroplast transformation efficiencies increased dramatically (about 200-fold) using an improved helium-driven biolistic device, as compared to the more commonly used gun powder charge-driven device. Using GUS as a reporter gene and the improved biolistic device, optimal bombardment conditions were established, consistently producing several hundred transient chloroplast transformants per Petri plate. Chloroplast transformation efficiency was found to be increased further (20-fold) with supplemental osmoticum (0.55 M sorbitol and 0.55 M mannitol) in the bombardment and incubation medium. This system provides a highly effective mechanism for introducing and expressing plasmid DNA within higher-plant chloroplasts, and the fact that GUS functions as an effective marker gene now makes many genetic studies possible which were not possible before.     

Transfection by particle bombardment: Delivery of plasmid DNA into mammalian cells using gene gun

Background

Recently, particle bombardment has become increasingly popular as a transfection method, because of a reduced dependency on target cell characteristics. In this study, we evaluated in vitro gene transfer by particle bombardment.

Methods

gWIZ luciferase and gWIZ green fluorescent protein (GFP) plasmids were used as reporter genes. Mammalian cell lines HEK 293, MCF7 and NIH/3T3 were used in the transfection experiments. Transfection was performed by bombardment of the cells with gene-coated gold particles using the Helios Gene Gun. The technology was assessed by analyzing gene expression and cell damage. Cell damage was evaluated by MTT assay.

Results

This technology resulted in efficient in vitro transfection, even in the cells which are difficult to transfect. The gene expression was dependent on the gene gun's helium pressure, the sizes of the gold particles, the amount of the particles and DNA loading, while cell viability was mostly dependent on helium pressure and amount of the gold particles.

Conclusions

This technology was useful to transfection of cells. Optimal transfection conditions were determined to be between 75 and 100 psi of helium pressure, 1.0 to 1.6 μm gold particle size and 0.5 mg of gold particle amount with a loading ratio of 4 μg DNA/mg gold particles.

General significance

These findings will be useful in the design of gene gun device, and bring further improvements to the in vitro and in vivo transfection studies including gene therapy and vaccination.     

多个抗虫基因转化水稻两用系培矮—64S

应用基因枪法对水稻两用系培矮－64S进行了转化。质粒载体pKC-3串联了三个抗虫基因,将其转化成熟胚诱导形成的愈伤组织,共获得33株转基因植株。分别对R0代植株不同的基因进行PCR及Southern blot分析,并对R1代植株进行了PCR分析。结果表明,三个抗虫基因均已整合到水稻基因组并获得稳定遗传。     

Transformation of 12 different plasmids into soybean via particle bombardment

Particle bombardment offers a simple method for the introduction of DNA into plant cells. Multiple DNA fragments may be introduced on a single plasmid or on separate plasmids (co-transformation). To investigate some of the properties and limits of co-transformation, 12 different plasmids were introduced into embryogenic suspension culture tissue of soybean [Glycine max (L.) Merrill] via particle bombardment. The DNAs used for co-transformation included 10 plasmids containing KFLP markers for maize and 2 plasmids separately encoding hygromycin-resistance and ß-glucuronidase. Two weeks following bombardment with the 12 different plasmids, suspension culture tissue was placed under hygromycin selection. Hygromycin-resistant clones were isolated after an additional 5 to 6 weeks. Southern hybridization analysis of 26 hygromycin-resistant embryogenic clones verified the presence of introduced plasmid DNAs. All of the co-transforming plasmids were present in most of the transgenic soybean clones and there was no preferential uptake and integration of any of the plasmids. The copy number of individual plasmids was approximately equal within clones but highly variable between clones. While some clones contained as few as zero to three copies of each plasmid, others clones contained as many as 10 to 15 copies of each of the 12 different plasmids.     

Optimization of parameters for particle bombardment of embryogenic suspension cultures of cassava (Manihot esculenta Crantz) using computer image analysis

Tissue derived from embryogenic suspension cultures of cassava was bombarded with microparticles coated with a plasmid containing theuidA gene, which codes for-glucuronidase (GUS). After 3 days, the effect of different bombardment parameters was evaluated by comparing the numbers of blue spots that resulted from histological GUS assays. Counting of blue spots was performed using a system comprised of a black and white video camera, a stereoscope and a personal computer. A reproducible counting method was established by optimizing GUS assay conditions, preparation of tissue samples and acquisition of video images in view of attaining the highest possible contrast between the blue spots and the surrounding tissue. The effects of bombardment pressure, microparticle size, number of bombardments, and osmotic pretreatment on GUS expression were investigated. Optimal transient expression of theuidA gene was observed after bombardment at 1100 psi, with a particle size of 1 µm, an osmotic pretreatment and two bombardments per sample. The highest number of blue spots observed was 2400 per square centimeter of bombarded tissue.     

Evaluation of parameters for high efficiency gene transfer via particle bombardment in Indian mulberry

Particle bombardment is a popular method of direct gene delivery into cell, tissue and organs since it requires minimum pre- and post-bombardment manipulation. In addition, this technique is much easier and fast to perform with intact tissue/organ and reduces the period of in vitro culture. Genetic transformation of mulberry, Morus indica cv. K2 was attempted by particle bombardment using hypocotyl, cotyledon, leaf and leaf callus explants. The effect of various physical and biological parameters during bombardment were studied by the histochemical localization of GUS reporter gene following two days of bombardment and by assessing the number of blue spots per explant. p35SGUSINT was used for optimization of different parameters. The percentage of GUS positive explants was very low with tungsten (20%) as compared to gold particles (36%) indicating tungsten toxicity to the tissue. Maximum GUS activity was observed at 1100 psi helium pressure and 9 cm target distance for hypocotyl, cotyledon and leaf. Double bombardment of explants with 10 microg of DNA loaded on macrocarriers clearly yielded a better (up to 56%) result as compared to a single bombardment (30%). Amongst the various plasmids tested, pBI221 gave the highest (100%) GUS positive explants in the leaf callus.     

Development of a simple particle bombardment device for gene transfer into plant cells

A simple particle bombardment device was designed, constructed and shown to be efficient for the delivery of DNA into plant cells. High levels of transient -glucuronidase expression were observed in alfalfa suspension-cultured cells and embryogenic soybean suspension-cultured cells. Expression of -glucuronidase in alfalfa suspension-cultured cells was used to optimize the bombardment conditions for the device. Transient gene expression in alfalfa was found to be dependent on the state of the target tissue, the size of particles employed, the helium pressure used to accelerate the particles and the distance travel led by the tungsten particles carrying DNA.Abbreviations 2,4-d 2,4-dichlorophenoxyacetic acid - GUS -glucuronidase - MS Murashige & Skoog (1962) medium     

Gene transfer to maize male reproductive structure by particle bombardment of tassel primordia

Summary Maize (Zea mays L.) tassel primordia were used as a target for particle bombardment, to assess the possibility of introducing foreign DNA into male reproductive structures. Transient expression of the -glucuronidase gene (GUS) or anthocyanin marker genes (C1 and B-Peru) driven by the CaMV 35S promoter was obtained in tassel primordia 24h after bombardment. Gold particles coated with DNA reached stamen primordia tissues, which eventually form the anthers and pollen. Bombarded tassels were also cultured in vitro and GUS activity was detected in the vascular tissue of mature anthers that developed within 4 weeks. This new approach represents a preliminary step toward pollen mediated transformation.     

Development of the particle inflow gun for DNA delivery to plant cells

Summary A simple and inexpensive particle bombardment device was constructed for delivery of DNA to plant cells. The Particle Inflow Gun (PIG) is based on acceleration of DNA-coated tungsten particles using pressurized helium in combination with a partial vacuum. The particles are accelerated directly in a helium stream rather than being supported by a macrocarrier. Bombardment parameters were partially optimized using transient expression assays of a ß-glucuronidase gene in maize embryogenic suspension culture and cowpea leaf tissues. High levels of transient expression of the ß-glucuronidase gene were obtained following bombardment of embryogenic suspension cultures of corn and soybean, and leaf tissue of cowpea. Stable transformation of embryogenic tissue of soybean has also been obtained using this bombardment apparatus.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - PCV packed cell volume - GUS ß-glucuronidase - NOS nopaline synthase Salaries and research support were provided by State and Federal funds appropriated to OSU/OARDC and USDA-ARS. Mention of trademark of proprietary products does not constitute a guarantee or warranty of the product by OSU/OARDC or USDA, and also does not imply approval to the exclusion of other products that may also be suitable. Journal Article No. 34-92     

Amplified somatic embryogenesis from male flowers of triploid banana and plantain cultivars (Musa spp.)

Summary Somatic embryogenesis and plant regeneration of banana and plantain cultivars (Musa spp.) were obtained by culturing young male flowers. Multiplication and maintenance of embryogenic cultures were achieved by culturing somatic embryos in a temporary immersion system (SIT). A multiplication rate of 40 allowed us to obtain more than 6000 somatic embryos after 6 mo. of subculture. Plant recovery frequencies were 60 to 70%. This method was expanded to different banana and plantain genomic groups.     

Development of an airgun device for particle bombardment

Construction and operation of an airgun device for transient gene-expression studies in monocots is described. Compressed air in a cylinder of an airgun was used as the source of propulsion for DNA-coated gold or tungsten particles. Under a partial vacuum of 700 mm Hg, velocity of the macrocarrier was measured at 520 m sec^?1 and 432 m sec^?1 at atmospheric pressure. Optimum distance from the stopping plate to different target cells during bombardment ranged from 4 to 7 cm. Mean transformation efficiency of the GUS-gene marker was estimated at 350 transformants per 65 mg fresh weight of the maize cultured cells. Up to 200 GUS transformed cells were detected per 100 mg of embryogenic rice callus. Use of gold flakes or tungsten powder as microcarriers resulted in similar transformation rates. No transformation was observed in any cells when DNA constructs contained prokaryotic translation initiation sequences for the GUS gene. Based on transient GUS assays, further modification of the airgun device will likely be necessary to obtain high stable transformation rates.     

DNA complexes with polycations useful for delivery of DNA into cells

Generation and physicochemical properties of complexes formed by high-molecular thymus DNA and plasmid DNA with synthetic polymers of (dimethyl amino)ethyl methacrylate, (diethyl amino)ethyl methacrylate, and poly(vinyl amine) were studied in solutions of different ionic strength using low-gradient viscometry, electrophoresis, circular dichroism, spectrophotometry, and dynamic light scattering. The complexes were tested for toxicity with T98G cell cultures. Condensation of DNA was shown to occur when the ratio of charged groups in the polycations and DNA exceeded unity. This condensation manifested itself as an increase in the optical density of DNA solutions. Condensation-associated changes in the dimensions of DNA molecules were determined, and phase diagrams of DNA-polycation systems were analyzed in the presence of NaCl. MTT analysis revealed no toxicity of these complexes.     

Optimization of electroporation parameters for the intramuscular delivery of plasmids in pigs

Increased transgene expression after plasmid transfer to the skeletal muscle is obtained with electroporation in many species, but optimum conditions are not well defined. Using a plasmid with a muscle-specific secreted embryonic alkaline phosphatase (SEAP) gene, we have optimized the electroporation conditions in a large mammal (pig). Parameters tested included electric field intensity, number of pulses, lag time between plasmid injection and electroporation, and plasmid delivery volume. Electric pulses, between 0.4 and 0.6 Amp constant current, applied 80 sec after the injection of 0.5 mg SEAP-expressing plasmid in a total volume of 2 mL produced the highest levels of expression. Further testing demonstrated that electroporation of a nondelineated injection site reduces the levels of SEAP expression. These results demonstrate that electroporation parameters such as amperage, lag time, and the number of pulses are able to regulate the levels of reporter gene expression in pigs.     

DNA complexes with polycations used for delivery of DNA into cells

The formation and physicochemical properties of high-molecular thymus and plasmid DNA complexes with synthetic polymers based on (dimethyl-amino)ethyl methacrylate (DMAEM), (diethyl-amino)ethyl methacrylate (DEAEM), and polyvinyl amine (PVA) were investigated in solutions of different ionic strength by low-gradient viscometry, electrophoresis, circular dichroism, spectrophotometry, and dynamic light scattering. The toxicity of complexes in T98G cells was studied. It was shown that, when the ratio of polycations to DNA charged groups concentration (N+/P) reaches values > 1, DNA condensation occurs. It is accompanied by increasing optical density of solutions. Changes in DNA size after condensation were estimated. Phase diagrams of systems DNA/polycation in the presence of NaCl were obtained. It was shown by MTT-analysis that DNA complexes with polycations in the range of concentrations used have low toxicity.     

A rapid method to monitor DNA precipitation onto microcarriers before particle bombardment

The binding or precipitation of DNA onto gold or tungsten microcarriers represents one of the most crucial steps for gene transfer via the particle bombardment process. We have developed a simple and rapid method to monitor DNA precipitation onto microcarriers before delivery to intact cells or tissues. Binding of DNA constructs to different microcarriers was evaluated with relative fluorescence values using a dedicated fluorometer. Significantly greater precipitation was detected using gold vs. tungsten microcarriers. Addition of glycerol resulted in a 46% increase in precipitation. A 42% difference in precipitation was observed using two different brands of polyproplyene tubes. Fluorescence values dropped 10–50% 3 hr after initial precipitation. Fluorescence values were correlated with the number of transient GUS transformants of rice (Oryza sativa, L.) cells. Precipitation with PEG gave higher fluorescent values and GUS transformants than a similar method without PEG. Results from these experiments indicate that fluorescence measurements are an effective and rapid method to monitor DNA precipitation for particle bombardment experiments.Communicated by C. Quiros     

Transgenic roots produced by introducing Ri-rol genes into cucumber cotyledons by particle bombardment

Transformed roots ofCucumis sativus were obtained from cotyledon tissues that had been bombarded with gold particles coated with plasmid pE7.4 using a pneumatic particle gun. This plasmid containsrolA, rolB, rolC genes and ORF 13 of the 7.4 kbEco RI fragment of T-DNA of pRi 1724 isolated fromAgrobacterium rhizogenes MAF 03-01724. The nature of the tissue and the composition of the culture media used greatly influenced the recovery of transformed roots. The transgenic nature of the derived roots was confirmed by the vigorous. highly-branched growth seen on a phytohormone-free medium. The stable integration ofrol genes into the cucumber genome was confirmed by Southern blot analysis.