The synthesis of chitosan-based silver nanoparticles and their antibacterial activity

Chitosan-based silver nanoparticles were synthesized by reducing silver nitrate salts with nontoxic and biodegradable chitosan. The silver nanoparticles thus obtained showed highly potent antibacterial activity toward both Gram-positive and Gram-negative bacteria, comparable with the highly active precursor silver salts. Silver-impregnated chitosan films were formed from the starting materials composed of silver nitrate and chitosan via thermal treatment. Compared with pure chitosan films, chitosan films with silver showed both fast and long-lasting antibacterial effectiveness against Escherichia coli. The silver antibacterial materials prepared in our present system are promising candidates for a wide range of biomedical and general applications.     

Inhibitory Effect on In Vitro Streptococcus oralis Biofilm of a Soda-Lime Glass Containing Silver Nanoparticles Coating on Titanium Alloy

This paper reports the effect of soda-lime-glass-nAg coating on the viability of an in vitro biofilm of Streptococcus oralis. Three strains (ATCC 35037 and two clinical isolates from periodontitis patients) were grown on coated with glass, glass containing silver nanoparticles, and uncoated titanium alloy disks. Two different methods were used to quantify biofilm formation abilities: crystal violet staining and determination of viable counts. The influence of the surface morphology on the cell attachment was studied. The surface morphology was characterized by scanning electron microscopy (SEM) and using a profilometer. SEM was also used to study the formation and the development of biofilm on the coated and uncoated disks. At least a >99.7% inocula reduction of biofilm respect to titanium disks and also to glass coated disks was observed in the glass-nAg coated disks for all the studied strains. A quantitative evaluation of the release of silver was conducted in vitro to test whether and to what extend the biocidal agent (silver) could leach from the coating. These findings suggest that the biofilm formation of S. oralis strains is highly inhibited by the glass-nAg and may be useful for materials which require durable antibacterial effect on their surfaces, as it is the case of dental implants.     

A Method of Obtaining Silver–Succinyl Chitosan Nanocomposites and their Antimicrobial Activity

To form silver nanoparticles by reduction from metal ions in the presence of a reducing agent, D-glucose, a water-soluble derivative of chitosan, succinyl-chitosan, was used as a polymer matrix at room temperature. The synthesis of silver nanoparticles can also be carried out without a reducing agent by thermal activation of the system using an alkali (NaOH) as an accelerator. The presence of silver nanoparticles in the obtained colloidal solutions was judged by the appearance of an absorption band in the electron plasmon resonance spectra (?_max = 417 nm). It has been shown that the use of an additional component, polyethylene oxide, in a macromolecular system makes it possible to obtain small silver nanoparticles (1–3 nm). The results of in vitro studies of the antimicrobial activity of the obtained colloidal solutions containing silver nanoparticles confirm that a decrease in the size of silver nanoparticles leads to an expansion of the spectrum of antibacterial activity of strains of gram-positive and gram-negative bacteria (B. subtilis ATCC 6633, S. aureus 209P, E. coli ATCC 25922) and to the manifestation of a pronounced antifungal action in relation to A. niger INA 00760.

     

Assessment of the potential bactericide effect of self‐cleaning floors: a proposed protocol

The antibacterial properties of self‐cleaning coatings are based on bactericide nanoparticles (NPs). Ecotoxicity of these NPs have been assessed mostly in suspension, using standard bioassays. Here a protocol is proposed to test actual coating samples, using the Vibrio fischeri bioluminescence inhibition bioassay. The protocol was designed to test bactericide properties of specially coated PVC floors being used in hospital environments under quasinatural conditions, such as prolonged exposure or room temperature. To take into consideration that the light output of the bacteria under prolonged exposure naturally changes, a correction factor is proposed.     

Study on the Effect of Poly(Styrene 4-Sulfonic Acid-co-Maleic Acid) Toward Metallization and Plasmonic Tuning of Silver Nanoparticle Thin Films

Thin films with tunable optical properties from yellow to metallic were prepared from a monolayer coating of silver nanoparticles (AgNP) onto a polyelectrolyte multilayer (PEM) thin film. The AgNP were synthesized using various concentrations of stabilizing polyelectrolytes leading to a competitive adsorption concept in which AgNP compete with excess polyelectrolytes to coat the cationic PEM top layer. The AgNP were synthesized by chemical reduction of Ag salts using poly(styrene 4-sulfonic acid-co-maleic acid) (PSS-co-MA) as stabilizing agent to produce nanoparticles coated with both a strong acid (sulfonic) and a weak acid (carboxylic) moiety. Although all the nanoparticle solutions displayed a characteristic bright yellow due to the localized surface plasmon band around 420 nm, the monolayer films of nanoparticles obtained after dipping displayed striking different optical properties. When using a high PSS-co-MA content in the solution, a pale-yellow film was obtained which color shifted to orange and metallic when the capping concentration was decreased from 0.25 to 0.001 mM. The optical properties of the AgNP film could be further changed by galvanic replacement of the Ag with gold ions to produce a gold monolayer. These results are interesting to produce surface with tunable catalytic properties, tunable optical properties, or to be used as primer for the metallization of polymeric surfaces.

     

Additional effects of silver nanoparticles on bactericidal efficiency depend on calcination temperature and dip-coating speed

There is an increasing interest in the application of photocatalytic properties for disinfection of surfaces, air, and water. Titanium dioxide is widely used as a photocatalyst, and the addition of silver reportedly enhances its bactericidal action. However, the synergy of silver nanoparticles and TiO(2) is not well understood. The photocatalytic elimination of Bacillus atrophaeus was examined under different calcination temperatures, dip-coating speeds, and ratios of TiO(2), SiO(2), and Ag to identify optimal production conditions for the production of TiO(2)- and/or TiO(2)/Ag-coated glass for surface disinfection. Photocatalytic disinfection of pure TiO(2) or TiO(2) plus Ag nanoparticles was dependent primarily on the calcination temperature. The antibacterial activity of TiO(2) films was optimal with a high dip-coating speed and high calcination temperature (600°C). Maximal bacterial inactivation using TiO(2)/Ag-coated glass was also observed following high-speed dip coating but with a low calcination temperature (250°C). Scanning electron microscopy (SEM) showed that the Ag nanoparticles combined together at a high calcination temperature, leading to decreased antibacterial activity of TiO(2)/Ag films due to a smaller surface area of Ag nanoparticles. The presence of Ag enhanced the photocatalytic inactivation rate of TiO(2), producing a more pronounced effect with increasing levels of catalyst loading.     

A comparison of silver ion to streptavidin coated microplates

Direct comparisons are made between covalently linked streptavidin and silver ion coated microplates. Both coatings can immobilize biotinylated molecules. Silver ion coated microplate wells can immobilize 1.8 times higher amounts of biotin labeled horseradish peroxidase. The quantitation range and capacity for the capture of horseradish peroxidase using biotin labeled horseradish peroxidase are also greater for silver ion coated microplates. Approximately twice as many anti-horseradish peroxidase antibodies can be immobilized per well using silver ion coated microplates. Higher capacities are presumed to be due to the smaller footprint of silver ions as compared to streptavidin. A direct comparison between the two coatings for a beta-galactosidase ELISA showed that while the silver ion coated microplates gave higher readings, the streptavidin coated microplates exhibited smaller well-to-well variation. However, higher well to well variation for the silver microplates is attributed to the high density of anti-beta-galactosidase antibodies on the microplates and the weak binding of clone GAL-13 to beta-galactosidase, rather than the silver coating. These studies suggest silver ion coated microplates are a desirable alternative to streptavidin plates for quantitative immunoassays.     

Hydrocolloid coating of Xenopus laevis embryos

A novel technology for coating single cells and embryos with thin hydrocolloid (water-soluble polymer) films has been invented and patented. Coating is different from entrapment and immobilization in that the coating around the cell is thinner, comprising only a small fraction of the cell or embryo's diameter. Xenopus laevis embryos were coated with thin films of low-methoxy pectin (LMP), alginate, and iota- and kappa-carrageenans. These gums have different compositions and structures and as such created different coatings around the fertilized cells. All coated embryos appeared to develop normally, similar to noncoated embryos. Elemental detection by ICP-AES spectroscopy revealed that the embryo can control the diffusion of excess ions to which it is exposed during the coating process. The coatings delayed hatching by 18-24 h. Consequently, at hatch the embryos were at a more developed stage than their noncoated counterparts. The hydrocolloid coating reduced the thickness of the natural jelly coating (JC). With the iota-carrageenan coating, percent hatch was maximal, while with LMP it was minimal, as a result of the films' mechanical properties and thicknesses. LMP and alginate created smoother coatings than the carrageenans. Potential interactions between the coating and the natural JC are hypothesized. Overall, coatings appear to be a suitable tool for laboratories interested in performing longer-term experiments with embryos.     

Biosensitive and antibacterial coatings on metallic material for medical applications

Metallic materials are commonly used for load-bearing implants and as internal fixation devices. It is customary to use austenitic stainless steel, especially surgical grade type 316L SS as temporary and Ti alloys as permanent implants. However, long-term, poor bonding with bone, corrosion, and release of metal ions, such as chromium and nickel occur. These ions are powerful allergens and carcinogens and their uncontrolled leaching may be avoided by surface coatings. Therefore, bioactive glasses (BGs) became a vital biomedical material, which can form a biologically active phase of hydroxycarbonate apatite on their surface when in contact with physiological fluids. To reduce the high coefficient of friction and the brittle nature of BGs, polymers are normally incorporated to avoid the high-temperature sintering/densification of ceramic-only coatings. For medical application, electrophoretic deposition (EPD) is now used for polymer (organic) and ceramic (inorganic) components at room temperature due to its simplicity, control of coating thickness and uniformity, low cost of equipment, ability to coat substrates of intricate shape and to supply thick films in composite form, high purity of deposits as well as no phase transformation during coating. Although extensive research has been conducted on polymer/inorganic composite coatings, only some studies have reported multifunctional properties, such as biological antibacterial activity, enhanced cell adhesion, controlled drug release ability, and mechanical properties. This review will focus on biodegradable coatings, including zien, chitosan, gelatin, cellulose loaded with antibacterial drugs/metallic ions/natural herbs on biostable substrates (PEEK/PMMA/PCL/PLLA layers), which have the potential of multifunctional coating for metallic implants.     

Assessment of antibacterial activity of silver nanoparticles on Pseudomonas aeruginosa and its mechanism of action

Antimicrobial activity of silver nanoparticles is gaining importance due its broad spectrum of targets in cell compared to conventional antimicrobial agents. In this context, a UV photo-reduction method was used for the synthesis and the nanoparticles were characterized by UV–Visible spectroscopy, transmission electron microscopy, atomic force microscopy and thermogravimetric analysis techniques. The antibacterial activity of the synthesized silver nanoparticles was evaluated both in liquid and solid growth media employing various susceptibility assays on Pseudomonas aeruginosa, a ubiquitous bacterium. The dose dependent growth suppression by nanoparticles was studied with well diffusion method. By broth dilution method, the minimum inhibitory concentration (MIC) was found to be 2 μg/ml. It was observed that the bactericidal effect depends both on nanoparticle concentration and number of bacteria present. In our study, we could demonstrate the complete antibiofilm activity of silver nanoparticles at a concentration as low as 1 μg/ml. Our observations substantiated the association of reactive oxygen species and cell membrane damage in the antibacterial mechanism of silver nanoparticles. Our findings suggested that these nanoparticles can be exploited towards the development of potential antibacterial coatings for various biomedical and environmental applications.     

Macromolecular systems and bactericidal films based on chitin derivatives and silver nanoparticles

A new polymer composite based on carboxymethylchitin and silver nanoparticles was obtained in order to produce biodegradable wound coating films. The number of metal nanoparticles in the composite may be easily regulated as was verified by UV-VIS-spectroscopy data. A comparative evaluation of silver nanoparticle size in the initial system and in the polymer composition was performed by means of photon correlation spectroscopy. Composite films revealed a pronounced concentration-dependent antibacterial activity towards strains Salmonella typhimurium and Staphilococcus aureus.     

Antimicrobial activity of AgCl embedded in a silica matrix on cotton fabric

An antimicrobial finishing for cotton fabric was prepared from commercial (iSys AG, Germany) silver chloride (Ag) dispersed at different concentrations in a reactive organic–inorganic binder (RB) (iSys MTX (CHT, Germany). Pad-dry-cure and exhaustion methods were used for the sols application, giving Ag-RB coating with Ag concentration from ca. 48 to ca. 290 ppm on the cotton fabric. The presence of silver on the cotton finishes was confirmed by measuring its concentration in the fabrics with the help of inductively coupled plasma mass spectroscopy (ICP-MS). The morphology of the finished fabrics was investigated by SEM, while their composition was established from EDXS measurements combined with the results of FT-IR spectral analysis. The antimicrobial activity of variously treated cotton fabrics was assessed before and after repetitive (up to 10×) washing by the application of standard tests: for the fungi Aspergillus niger (ATCC 6275) and Chaetomium globosum (ATCC 6205) by the modified DIN 53931 standard method, while the presence of Gram-negative bacterium Escherichia coli (ATCC 25922) was followed by using ISO 20645:2004 (E) and AATCC 100-1999 standard methods. Results revealed that the antimicrobial activity of the coatings strongly depended on the concentration of Ag in the corresponding Ag-RB dispersions, indirectly depending on the preparation method (pad-dry-cure vs. exhaustion) and that the Ag-RB coatings were more effective for bacteria than for fungi. The Ag concentrations on the cotton fabrics achieved by the pad-dry-cure method (48 and 52 ppm) were not sufficient to impart satisfactory antifungal activity to the cotton fabrics, though they assured excellent reduction of the bacterium E. coli (98–100%). A minimal inhibitory concentration of Ag in the coating providing a sufficient bacterial reduction of 60% was ca. 24 ppm. Effective antifungal activity was achieved only by applying the exhaustion method, enabling high initial Ag concentration in the Ag-RB coating (>100 ppm). The antibacterial activity depended on the washing treatment. No antifungal activity was noted for washed cotton fabric, even those with highly concentrated Ag (290 ppm) in the Ag-RB coating, but a 94% bacterial reduction was obtained for the corresponding cotton fabric, after 10 repetitive washings, corroborated by the Ag concentration on washed fabric of about 65 ppm.     

Surface modification of poly(L-lactic acid) membrane via layer-by-layer assembly of silver nanoparticle-embedded polyelectrolyte multilayer

The improvement of hydrophilicity, antibacterial activity, hemocompatibility, and cytocompatibility of poly(L-lactic acid) (PLLA) membrane was developed via polyelectrolyte multilayer (PEM) immobilization. Colloidal silver nanoparticles were prepared by using dextran sulfate (DS) as a stabilizer to precede chemical reduction by dextrose. The polysaccharide PEMs, including chitosan (CH) and dextran sulfate (DS)-stabilized silver nanosized colloid (DSS), were successfully deposited on the aminolyzed PLLA membrane in a layer-by-layer (LBL) self-assembly manner. The obtained results showed that the contact angle of PLLA membranes decreased with PEMs grafting layers and reached a steady value after four bilayers of coating, hence suggesting that full coverage was achieved. The PLLA-PEM membranes with DSS as the outermost layer could resist platelet adhesion and human plasma fibrinogen (HPF) adsorption, while prolonging the blood coagulation time. The PLLA-PEM membranes could possess antibacterial activity against Methicilin-resistant Staphylococus aureus (MRSA). In addition, the proliferation and viability of human endothelial cells (ECs) on PLLA-PEM membranes could be significantly improved. Overall results demonstrated that such a fast, easy processing and shape-independent method for an antithrombogenic coating can be used for applications in hemodialysis devices.     

Silver nanoparticles: partial oxidation and antibacterial activities

The physical and chemical properties of silver nanoparticles that are responsible for their antimicrobial activities have been studied with spherical silver nanoparticles (average diameter approximately 9 nm) synthesized by the borohydride reduction of Ag+ ions, in relation to their sensitivity to oxidation, activities towards silver-resistant bacteria, size-dependent activities, and dispersal in electrolytic solutions. Partially (surface) oxidized silver nanoparticles have antibacterial activities, but zero-valent nanoparticles do not. The levels of chemisorbed Ag+ that form on the particle's surface, as revealed by changes in the surface plasmon resonance absorption during oxidation and reduction, correlate well with the observed antibacterial activities. Silver nanoparticles, like Ag+ in the form of AgNO3 solution, are tolerated by the bacteria strains resistant to Ag+. The antibacterial activities of silver nanoparticles are related to their size, with the smaller particles having higher activities on the basis of equivalent silver mass content. The silver nanoparticles aggregate in media with a high electrolyte content, resulting in a loss of antibacterial activities. However, complexation with albumin can stabilize the silver nanoparticles against aggregation, leading to a retention of the antibacterial activities. Taken together, the results show that the antibacterial activities of silver nanoparticles are dependent on chemisorbed Ag+, which is readily formed owing to extreme sensitivity to oxygen. The antibacterial activities of silver nanoparticles are dependent on optimally displayed oxidized surfaces, which are present in well-dispersed suspensions.     

钛合金植入体表面抗感染涂层的制备及其体外抑菌性能研究

临床中,内植物引起的相关感染是矫形外科以及创伤外科面临的重要问题。以聚乳酸（PDLLA）为载体,采用溶剂浇铸（solvent-casting）的方法,在钛合金植入物基体表面制备了载万古霉素（VCM）的PDLLA涂层,期望通过缓释万古霉素来抑制细菌感染。体外释药实验表明,涂层具有良好的缓释作用,在磷酸盐缓冲液（PBS）中持续释放VCM20天以上;涂层对引起感染的主要致病菌（金黄色葡萄球菌）具有超过15天的抑制作用。提示该涂层钛合金植入物有望在预防植入材料相关感染方面获得应用。     

Antibacterial activity of chitosan tripolyphosphate nanoparticles loaded with various metal ions

The aim of this study was to prepare and select chitosan nanoparticles loaded metal ions with high antibacterial activities. Chitosan nanoparticles were prepared based on ionic gelation between chitosan and sodium tripolyphosphate. Then, Ag⁺, Cu²⁺, Zn²⁺, Mn²⁺, or Fe²⁺ was individually loaded onto chitosan nanoparticles. Their particle sizes and zeta potentials were measured. Their antibacterial activities were evaluated by determination of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against Escherichia coli 25922, Salmonella choleraesuis ATCC 50020 and Staphylococcus aureus 25923 in vitro. Results showed that antibacterial activity was significantly enhanced by the metal ions loaded, except for Fe²⁺. Especially for chitosan nanoparticles loaded Cu²⁺, the MIC and MBC against E. coli 25922, S.choleraesuis ATCC 50020 and S. aureus 25923 were 21–42 times lower than that of Cu²⁺, respectively. Moreover, it was found that antibacterial activity was directly proportional to zeta potential.     

Antimicrobial characteristics and biocompatibility of the surgical sutures coated with biosynthesized silver nanoparticles

Surgical sutures play important role during the wound healing of the surgical sites which are known to be sensitive to microbial infections. Silver nanoparticles (AgNPs) have been recently used as promising agents against multiple-drug resistant microorganisms. This study was designed to coat the sutures with silver nanoparticles obtained via a green synthesis approach. Microbial-mediated biological synthesis of AgNPs were carried out ecofriendly using Streptomyces sp. AU2 cell-free extract and deposited on silk sutures through an in situ process. Sutures coated with biosyntehsized AgNP (bio-AgNP coated sutures) were characterized using Scanning Electron Microscopy (SEM) and elemantal analysis were carried out using Energy Dispersive X-ray Spectroscopy (EDS). The silver amount released by the bio-AgNP coated sutures was calculated by Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) throughout a degradation process. Antimicrobial potential of the bio-AgNP coated sutures was determined against common pathogenic microorganisms Candida albicans, Escherichia coli and Staphylococcus aureus. To determine the biocompatibility/cytotoxicty of the bio-AgNP coated sutures, the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium) assay was used through an indirect test method; that the elutions obtained by the extraction of the sutures at 1, 4, 8 and 10. days and were placed in contact with 3T3 fibroblast cell culture. To best of our knowledge, this is the first report about coating of the nonabsorbable silk sutures with silver nanoparticles biosynthesized using a microbial extract.     

The antibacterial activity of biogenic silver and its mode of action

In a previous study, biogenic silver nanoparticles were produced by Lactobacillus fermentum which served as a matrix preventing aggregation. In this study the antibacterial activity of this biogenic silver was compared to ionic silver and chemically produced nanosilver. The minimal inhibitory concentration (MIC) was tested on Gram-positive and Gram-negative bacteria and was comparable for biogenic silver and ionic silver ranging from 12.5 to 50 mg/L. In contrast, chemically produced nanosilver had a much higher MIC of at least 500 mg/L, due to aggregation upon application. The minimal bactericidal concentration (MBC) in drinking water varied from 0.1 to 0.5 mg/L for biogenic silver and ionic silver, but for chemically produced nanosilver concentrations, up to 12.5 mg/L was needed. The presence of salts and organic matter decreased the antimicrobial activity of all types of silver resulting in a higher MBC and a slower inactivation of the bacteria. The mode of action of biogenic silver was mainly attributed to the release of silver ions due to the high concentration of free silver ions measured and the resemblance in performance between biogenic silver and ionic silver. Radical formation by biogenic silver and direct contact were found to contribute little to the antibacterial activity. In conclusion, biogenic nanosilver exhibited equal antimicrobial activity compared to ionic silver and can be a valuable alternative for chemically produced nanosilver.     

Oxygen-scavenging coatings and films based on lignosulfonates and laccase

Laccase and lignosulfonates were included in coating colors and embedded in latex-based or starch-based films and coatings on foil or board. After 6 days at 23 °C and 100% relative humidity, the oxygen content in airtight chambers decreased from 1.0% (synthetic gas consisting of 99% N(2) and 1% O(2)) to 0.3% in the presence of board coated with lignosulfonate and laccase, while the oxygen content remained unchanged in control experiments without enzyme. The water stability of lignosulfonate-containing latex-based coatings and starch-based films was improved after laccase-catalyzed oxidation of lignosulfonates, which indicates polymerization to products with lower solubility in water. Furthermore, the E' modulus of starch-based films increased with 30%, which indicates laccase-catalyzed polymerization of lignosulfonates resulting in increased stiffness of the film. The results suggest that laccases and lignosulfonates can be used as an oxygen-scavenging system in active packaging and that enzyme-catalyzed polymerization of lignosulfonates contributes to improved water stability and mechanical properties.     

Biodeterioration of external architectural paint films - A review

This paper presents a review of the biodeterioration of architectural paint films by bacteria, fungi and algae, concentrating on external films. 107 references are cited in the following sections: 1. Microbiota of paint films - resident microflora, colonization and biofilm formation; 2. Effects of environment on biofilm formation and survival; 3. Influence of paint formulation on colonization - basic paint components, pigment volume content (PVC), pigments, biocides; 4. Effects of painted substrate on susceptibility; 5. Instrumental methods used in the analysis of paint film biodeterioration - vibrational spectroscopy, laser-induced breakdown spectroscopy, HPLC, image analysis, FTIR spectroscopy, GC-MS; 6. New technologies in the coatings industry - photocatalytic layers, cool paints, silver nanoparticles, silicon-containing paints.