Effect of pH and monovalent cations on the ionization state of phosphatidylglycerol in monolayers. An experimental (surface potential) and theoretical (Gouy-Chapman) approach

Ionization of the acidic phospholipid phosphatidylglycerol has been studied by measuring the surface potential of monomolecular films of the lipid as a function of the aqueous subphase pH and the concentration of monovalent cations (Li, Na, Cs). It is shown that the experimental data can be interpreted by means of the Gouy-Chapman theory in its simplest formulation, provided an adsorption of cations at the membrane surface is accounted for. This allows us to predict the ionization state of the lipid for given ionic conditions in the subphase. Above pH 4, for subphase ion concentration higher than 10 mM, or for ion concentrations above 0.1 mM at pH 5.6, phosphatidylglycerol is fully deprotonated. Within the limits of our theoretical approach, association constants of the cations to the lipid lie around 0.1-0.6 M-1.     

The adsorption of divalent cations to phosphatidylglycerol bilayer membranes

The ability of the Stern equation to describe the adsorption of divalent cations to phosphatidylglycerol membranes was tested by combining ³¹P-NMR and electrophoretic mobility measurements. In 0.1 M sodium chloride both the ³¹P-NMR and the zeta potential data are well described by the Stern equation. ³¹P-NMR and ¹³C-NMR results indicate that cobalt forms inner-sphere complexes only with the phosphate group of phosphatidylglycerol molecules and that a substantial fraction of the adsorbed cobalt ions form outer-sphere complexes. Evidence is presented that suggests the alkaline earth cations also bind to phospholipids mainly by forming outer sphere complexes. Electrophoretic mobility measurements were performed with several different divalent cations. In all cases the zeta potentials in 0.1 M sodium chloride were well described by the Stern equation. The intrinsic 1 : 1 association constants (M^?1) for the phosphatidylglycerol complexes decreased in the sequence: Mn²⁺, 11.5; Ca²⁺, 8.5; Ni²⁺, 7.5; Co²⁺, 6.5; Mg²⁺, 6.0; Ba²⁺, 5.5 and Sr²⁺, 5.0.     

Shielding effect of monovalent and divalent cations on solid-phase DNA hybridization: surface plasmon resonance biosensor study

Solid-phase hybridization, i.e. the process of recognition between DNA probes immobilized on a solid surface and complementary targets in a solution is a central process in DNA microarray and biosensor technologies. In this work, we investigate the simultaneous effect of monovalent and divalent cations on the hybridization of fully complementary or partly mismatched DNA targets to DNA probes immobilized on the surface of a surface plasmon resonance sensor. Our results demonstrate that the hybridization process is substantially influenced by the cation shielding effect and that this effect differs substantially for solid-phase hybridization, due to the high surface density of negatively charged probes, and hybridization in a solution. In our study divalent magnesium is found to be much more efficient in duplex stabilization than monovalent sodium (15 mM Mg²⁺ in buffer led to significantly higher hybridization than even 1 M Na⁺). This trend is opposite to that established for oligonucleotides in a solution. It is also shown that solid-phase duplex destabilization substantially increases with the length of the involved oligonucleotides. Moreover, it is demonstrated that the use of a buffer with the appropriate cation composition can improve the discrimination of complementary and point mismatched DNA targets.     

Comparison of the hammerhead cleavage reactions stimulated by monovalent and divalent cations

Although the hammerhead reaction proceeds most efficiently in divalent cations, cleavage in 4 M LiCl is only approximately 10-fold slower than under standard conditions of 10 mM MgCl2 (Murray et al., Chem Biol, 1998, 5:587-595; Curtis & Bartel, RNA, 2001, this issue, pp. 546-552). To determine if the catalytic mechanism with high concentrations of monovalent cations is similar to that with divalent cations, we compared the activities of a series of modified hammerhead ribozymes in the two ionic conditions. Nearly all of the modifications have similar deleterious effects under both reaction conditions, suggesting that the hammerhead adopts the same general catalytic structure with both monovalent and divalent cations. However, modification of three ligands previously implicated in the binding of a functional divalent metal ion have substantially smaller effects on the cleavage rate in Li+ than in Mg2+. This result suggests that an interaction analogous to the interaction made by this divalent metal ion is absent in the monovalent reaction. Although the contribution of this divalent metal ion to the overall reaction rate is relatively modest, its presence is needed to achieve the full catalytic rate. The role of this ion appears to be in facilitating formation of the active structure, and any direct chemical role of metal ions in hammerhead catalysis is small.     

The permeability of endplate channels to monovalent and divalent metal cations

The relative permeability of endplate channels to monovalent and divalent metal ions was determined from reversal potentials. Thallium is the most permeant ion with a permeability ratio relative to Na+ of 2.5. The selectivity among alkali metals is weak with a sequence, Cs+ greater than Rb+ greater than K+ greater than Na+ greater than Li+, and permeability ratios of 1.4, 1.3, 1.1, 1.0, and 0.9. The selectivity among divalent ions is also weak, with a sequence for alkaline earths of Mg++ greater than Ca++ greater than Ba++ greater than Sr++. The transition metal ions Mn++, Co++, Ni++, Zn++, and Cd++ are also permeant. Permeability ratios for divalent ions decreased as the concentration of divalent ion was increased in a manner consistent with the negative surface potential theory of Lewis (1979 J. Physiol. (Lond.). 286: 417--445). With 20 mM XCl2 and 85.5 mM glucosamine.HCl in the external solution, the apparent permeability ratios for the alkaline earth cations (X++) are in the range 0.18--0.25. Alkali metal ions see the endplate channel as a water-filled, neutral pore without high-field-strength sites inside. Their permeability sequence is the same as their aqueous mobility sequence. Divalent ions, however, have a permeability sequence almost opposite from their mobility sequence and must experience some interaction with groups in the channel. In addition, the concentrations of monovalent and divalent ions are increased near the channel mouth by a weak negative surface potential.     

Pyruvate kinase: Activation by and catalytic role of the monovalent and divalent cations

Summary This mini review is primarily concerned with the monovalent and divalent cation activation of pyruvate kinase. All preparations of pyruvate kinase from vertebrate tissue which have been examined require monovalent cations such as K⁺ for catalysis. However, several microbial preparations are not activated by monovalent cations. In fact,E. coli synthesizes depending on growth conditions, 2 different forms of the enzyme; one form is not activated while the other is activated by monovalent cations. The monovalent cation was shown by NMR techniques to bind within 4–8 ? of the divalent cation activat or and apparently plays a direct role in the catalytic process. As with all kinases, pyruvate kinase requires a divalent cation for catalysis. Mg⁺² is optimal for the physiological reaction, however, Co⁺², Mn⁺², and Ni⁺² also activate. The divalent cation activation of several non-physiological reactions catalyzed by pyruvate kinase are reviewed. Several lines of evidence suggest that 2 moles of the divalent cation are required in the catalytic event. However, the specific role of both atoms in the catalytic event have not been thoroughly elucidated.     

Using light scattering measurements to study the effects of monovalent and divalent cations on alginate aggregates

Light scattering measurements were used to assess the effectsof selected divalent and monovalent cations on alginate aggregationin vitro. Alginate, formed with either strontium, calcium orcobalt was partially dissolved with sodium. Calcium-alginatewas also partially dissolved with two other monovalent cations,lithium and potassium. Phosphate, when added to a solution containingcalcium-alginate, scrubbed algin-ate-bound calcium as well asfree calcium in solution. These findings provide an explanationfor an alternative approach for breaking down cell wall alginate. Key words: Alginate aggregates, monovalent cations, divalent cations, light scattering     

Ionic currents of channels that are permeable to monovalent and divalent cations.

The cation-selective channel from Tetrahymena cilia is permeable to both monovalent and divalent cations. The single channel conductance in mixed solutions of K+ and Ca2+ was determined by the Gibbs-Donnan ratio of K+ and Ca2+, and the binding sites of this channel were considered to be always occupied by two potassium ions or by one calcium ion under the experimental conditions: 5-90 mM K+ and 0.5-35 mM Ca2+ (Oosawa and Kasai, 1988). A two-barrier model for the channel was introduced and the values of Michaelis-Menten constants and maximum currents carried by K+ and Ca2+ were calculated using this model. Single channel current amplitudes and reversal potentials were calculated from these values. The calculated single-channel currents were compared with those obtained experimentally. The calculated reversal potentials were compared with the resting potentials of Tetrahymena measured in various concentrations of extracellular K+ and Ca2+. The method of calculation of ionic currents and reversal potentials presented here is helpful for understanding the properties of the channels permeable to both monovalent and divalent cations.     

Influence of monovalent cations on rat alpha- and beta-parvalbumin stabilities

The mammalian genome encodes both alpha- and beta-parvalbumin isoforms. The rat beta-parvalbumin (aka "oncomodulin") is more stable than the alpha isoform at physiological pH and ionic strength, despite its substantially higher charge density and truncated C-terminal helix [Henzl, M. T., and Graham, J. S. (1999) FEBS Lett. 442, 241-245]. Reasoning that solvent interactions could contribute to this unexpected finding, we have examined the stabilities of the Ca(2+)-free alpha- and beta-parvalbumins as a function of Na(+) and K(+) concentration. Differential scanning calorimetry data suggest that, at physiological pH and ionic strength, the beta isoform binds roughly 2 equiv of Na(+) or a single equivalent of K(+) with moderate affinity. Under comparable conditions, the alpha isoform apparently binds just 1 equiv of Na(+) and essentially no K(+). Isothermal titration calorimetry experiments suggest that the bound monovalent ions occupy the EF-hand motifs. In 0.15 M K(+), at pH 7.4, the stability of the apo-beta-parvalbumin exceeds that of the alpha isoform by approximately 2.6 kcal/mol at 37 degrees C and by approximately 3.0 kcal/mol at 25 degrees C. The latter value represents a substantial fraction of the difference in Ca(2+)-binding free energies measured in vitro for the two proteins. Significantly, however, these results do not completely explain the paradoxical stability of the beta isoform, which maintains its higher melting temperature under all conditions examined.     

Influence of monovalent cation identity on parvalbumin divalent ion-binding properties

Rat alpha- and beta-parvalbumins have distinct monovalent cation-binding properties [Henzl et al. (2000) Biochemistry 39, 5859-5867]. Beta binds two Na(+) or one K(+), and alpha binds one Na(+) and no K(+). Ca(2+) abolishes these binding events, suggesting that the monovalent ions occupy the EF-hand motifs. This study compares alpha and beta divalent ion affinities in Na(+) and K(+) solutions. Solvent cation identity seriously affects alpha. In Hepes-buffered NaCl, at 5 degrees C, the macroscopic Ca(2+)-binding constants are 2.6 x 10(8) and 6.4 x 10(7) M(-1) and the Mg(2+) constants, 1.8 x 10(4) and 4.3 x 10(3) M(-1). In Hepes-buffered KCl, the Ca(2+) values increase to 2.9 x 10(9) and 6.6 x 10(8) M(-1) and the Mg(2+) values to 2.2 x 10(5) and 3.7 x 10(4) M(-1). Monte Carlo simulation of alpha binding data-employing site-specific constants and explicitly considering Na(+) binding-yields a K(Na) of 630 M(-1) and indicates that divalent ion-binding is positively cooperative. NMR data suggest that the lone Na(+) ion occupies the CD loop. Solvent cation identity has a smaller impact on beta. In Na(+), the Ca(2+) constants for the EF and CD sites are 2.3 x 10(7) and 1.5 x 10(6) M(-1), respectively; the Mg(2+) constants are 9.2 x 10(3) and 1.7 x 10(2) M(-1). In K(+), these values shift to 3.1 x 10(7) and 3.8 x 10(6) M(-1) and the latter to 1.4 x 10(4) and 2.9 x 10(2) M(-1). These data suggest that parvalbumin divalent ion affinity, particularly that of rat alpha, can be significantly attenuated by increased intracellular Na(+) levels.     

A preliminary investigation on the growth requirement for monovalent cations, divalent cations and medium ionic strength of marine actinomycete Salinispora

In this paper, we report that three species of Salinispora, S. arenicola, S. tropica, and S. pacifica, require magnesium and calcium, for growth, with S. pacifica having the most stringent growth requirement for these ions. Interaction between these ions in supporting the growth of Salinispora was observed. We also demonstrated that the absolute requirement of sodium to support the growth of Salinispora has not been established as all three species of Salinispora can use either potassium or lithium to replace sodium to support maximum growth. While lithium can replace sodium to support maximum growth of Salinispora, it is more toxic to S. arenicola than S. tropica and S. pacifica, inhibiting the growth of S. arenicola at 189 mM but without effect on the growth of S. tropica and S. pacifica. Using both sodium chloride-based and lithium chloride-based media, we showed that Salinispora has a growth requirement for divalent ions, magnesium and calcium as well as growth requirement for ionic strength (8.29 to 15.2 mS/cm). S. arenicola has a lower growth requirement for ionic strength than S. tropica and S. pacifica.     

Effect of divalent cations on the structure of dipalmitoylphosphatidylcholine and phosphatidylcholine/phosphatidylglycerol bilayers: an 2H-NMR study

The interactions of CaCl2 or MgCl2 with multilamellar phospholipid bilayers were studied by 2H-NMR. Two model membrane systems were used: (1) dipalmitoylphosphatidylcholine (DPPC) bilayers and (2) bilayers composed of a mixture of phosphatidylcholine and phosphatidylglycerol at a molar ratio of 5:1. Addition of 0.25 M CaCl2 to DPPC bilayers resulted in significant uniform increase of the order parameters of the lipid side chains; the effect of 0.25 M MgCl2 was insignificant. Both phosphatidylcholine and phosphatidylglycerol components of the mixed bilayers were affected by the presence of 0.25 M CaCl2 and, to a much smaller degree, by MgCl2. The addition of Ca2+ induced significantly larger increase of the order parameters of the phosphatidylcholine component. The results are consistent with the long-range effects of Ca2+ binding on the packing of the lipid membranes.