Crystals of sarcoplasmic reticulum Ca(2+)-ATPase

High-resolution structures of the Ca(2+)-ATPase have over the last 5 years added a structural dimension to our understanding of the function of this integral membrane protein. The Ca(2+)-ATPase is now by far the membrane protein where the most functionally different conformations have been described in precise structural detail. Here, we review our experience from solving Ca(2+)-ATPase structures: a purification scheme involving minimum handling of the protein to preserve natural and essential lipids, a rational approach to screening for crystals based on a limited number of polyethyleneglycols and many different salts, improving crystal quality using additives, collecting the data and finally solving the structures. We argue that certain of the lessons learned in the present study are very likely to be useful for crystallisation of eukaryotic membrane proteins in general.     

Vectorially oriented monolayers of detergent-solubilized Ca(2+) -ATPase from sarcoplasmic reticulum.

A method for tethering proteins to solid surfaces has been utilized to form vectorially oriented monolayers of the detergent-solubilized integral membrane protein Ca(2+) -ATPase from the sarcoplasmic reticulum (SR). Bifunctional, organic self-assembled monolayers (SAMs) possessing "headgroup" binding specificity for the substrate and "endgroup" binding specificity for the enzyme were utilized to tether the enzyme to the substrate. Specifically, an amine-terminated 11-siloxyundecaneamine SAM was found to bind the Ca(2+)-ATPase primarily electrostatically. The Ca(2+)-ATPase was labeled with the fluorescent probe 5-(2-[(iodoacetyl)amino]ethyl)aminonaphthalene-1-sulfonic acid before monolayer formation. Consequently, fluorescence measurements performed on amine-terminated SAM/enzyme monolayers formed on quartz substrates served to establish the nature of protein binding. Formation of the monolayers on inorganic multilayer substrates fabricated by molecular beam epitaxy made it possible to use x-ray interferometry to determine the profile structure for the system, which was proved correct by x-ray holography. The profile structures established the vectorial orientation of the Ca(2+)-ATPase within these monolayers, to a spatial resolution of approximately 12 A. Such vectorially oriented monolayers of detergent-solubilized Ca(2+)-ATPase from SR make possible a wide variety of correlative structure/function studies, which would serve to elucidate the mechanism of Ca(2+) transport by this enzyme.     

Proton paths in the sarcoplasmic reticulum Ca(2+) -ATPase

The sarcoplasmic reticulum Ca(2+)-ATPase (SERCA1a) pumps Ca(2+) and countertransport protons. Proton pathways in the Ca(2+) bound and Ca(2+)-free states are suggested based on an analysis of crystal structures to which water molecules were added. The pathways are indicated by chains of water molecules that interact favorably with the protein. In the Ca(2+) bound state Ca(2)E1, one of the proposed Ca(2+) entry paths is suggested to operate additionally or alternatively as proton pathway. In analogs of the ADP-insensitive phosphoenzyme E2P and in the Ca(2+)-free state E2, the proton path leads between transmembrane helices M5 to M8 from the lumenal side of the protein to the Ca(2+) binding residues Glu-771, Asp-800 and Glu-908. The proton path is different from suggested Ca(2+) dissociation pathways. We suggest that separate proton and Ca(2+) pathways enable rapid (partial) neutralization of the empty cation binding sites. For this reason, transient protonation of empty cation binding sites and separate pathways for different ions are advantageous for P-type ATPases in general.     

Characterisation of thapsigargin-releasable Ca(2+) from the Ca(2+)-ATPase of sarcoplasmic reticulum at limiting [Ca(2+)

The Ca(2+) binding sites of the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum (SR) have been identified as two high-affinity sites orientated towards the cytoplasm, two sites of low affinity facing the lumen, and a transient occluded species that is isolated from both membrane surfaces. Binding and release studies, using (45)Ca(2+), have invoked models with sequential binding and release from high- and low-affinity sites in a channel-like structure. We have characterised turnover conditions in isolated SR vesicles with oxalate in a Ca(2+)-limited state, [Ca(2)](lim), where both high- and low-affinity sites are vacant in the absence of chelators (Biochim. Biophys. Acta 1418 (1999) 48-60). Thapsigargin (TG), a high-affinity specific inhibitor of the Ca(2+)-ATPase, released a fraction of total Ca(2+) at [Ca(2+)](lim) that accumulated during active transport. Maximal Ca(2+) release was at 2:1 TG/ATPase. Ionophore, A23187, and Triton X-100 released the rest of Ca(2+) resistant to TG. The amount of Ca(2+) released depended on the incubation time at [Ca(2+)](lim), being 3.0 nmol/mg at 20 s and 0.42 nmol/mg at 1000 s. Rate constants for release declined from 0. 13 to 0.03 s(-1). The rapidly released early fraction declined with time and k=0.13 min(-1). Release was not due to reversal of the pump cycle since ADP had no effect; neither was release impaired with substrates acetyl phosphate or GTP. A phase of reuptake of Ca(2+) followed release, being greater with shorter delay (up to 200 s) following active transport. Reuptake was minimal with GTP, with delays more than 300 s, and was abolished by vanadate and at higher [TG], >5 microM. Ruthenium red had no effect on efflux, indicating that ryanodine-sensitive efflux channels in terminal cisternal membranes are not involved in the Ca(2+) release mechanism. It is concluded that the Ca(2+) released by TG is from the occluded Ca(2+) fraction. The Ca(2+) occlusion sites appear to be independent of both high-affinity cytoplasmic and low-affinity lumenal sites, supporting a multisite 'in line' sequential binding mechanism for Ca(2+) transport.     

CrATP-induced Ca2+ occlusion in mutants of the Ca(2+)-ATPase of sarcoplasmic reticulum.

Use of the nonphosphorylating beta,gamma-bidentate chromium(III) complex of ATP to induce a stable Ca(2+)-occluded form of the sarcoplasmic reticulum Ca(2+)-ATPase was combined with molecular sieve high performance liquid chromatography of detergent-solubilized protein to examine the ability of the Ca(2+)-ATPase mutants Gly-233-->Glu, Gly-233-->Val, Glu-309-->Gln, Gly-310-->Pro, Pro-312-->Ala, Ile-315-->Arg, Leu-319-->Arg, Asp-703-->Ala, Gly-770-->Ala, Glu-771-->Gln, Asp-800-->Asn, and Gly-801-->Val to occlude Ca2+. This provided a new approach to identification of amino acid residues involved in Ca2+ binding and in the closure of the gates to the Ca2+ binding pocket of the Ca(2+)-ATPase. The "phosphorylation-negative" mutant Asp-703-->Ala and mutants of ADP-sensitive phosphoenzyme intermediate type were fully capable of occluding Ca2+, as was the mutant Gly-770-->Ala. Mutants in which carboxylic acid-containing residues in the putative transmembrane segments had been substituted ("Ca(2+)-site mutants") and mutant Gly-801-->Val were unable to occlude either of the two calcium ions. In addition, the mutant Gly-310-->Pro, previously classified as ADP-insensitive phosphoenzyme intermediate type (Andersen, J.P., Vilsen, B., and MacLennan, D.H. (1992). J. Biol. Chem. 267, 2767-2774), was unable to occlude Ca2+, even though Ca(2+)-activated phosphorylation from MgATP took place in this mutant.     

Arsenate-induced fluorescence changes in the Ca(2+)-ATPase of sarcoplasmic reticulum membranes.

Arsenate, an analogue of inorganic phosphate, causes an increase in the intrinsic fluorescence of the Ca(2+)-ATPase of sarcoplasmic reticulum membranes. This increase in fluorescence is observed regardless of whether Ca(2+)-loaded or leaky vesicles are assayed. The maximal fluorescence change (2-3%) is observed at pH 6.0 in the presence of Mg2+ and is abolished by the addition of micromolar Ca2+ concentrations. Dimethyl sulfoxide (20% v/v) increases the enzyme's affinity for arsenate one order of magnitude. It is concluded that arsenate, after binding, promotes the same conformational change of the enzyme as that produced by Pi.     

Characterization of phenylmaleimide inhibition of the Ca(2+)-ATPase from skeletal-muscle sarcoplasmic reticulum

The Ca(2+)-ATPase from sarcoplasmic reticulum reacts with phenylmaleimide, producing the inhibition of the ATPase activity following a pseudo-first-order kinetic with a rate constant of 19 M(-1) s(-1). Calcium and ATP binding are not altered upon phenylmaleimide inhibition. However, the presence of millimolar calcium, and to a lesser extent magnesium, in the inhibition medium enhances the effect of phenylmaleimide, causing a higher degree of inhibition. Solubilization with C(12)E(8) does not affect the ATPase inhibition, excluding any kind of participation of the lipid bilayer. Phosphorylation with ATP in steady-state conditions as well as phosphorylation with inorganic phosphate in equilibrium conditions were strongly inhibited. Conversely, we have found that the occupancy of the phosphorylation site by ortovanadate fully protects against the inhibitory effect of phenylmaleimide, indicating a conformational transition associated with the phosphorylation reaction.     

Thermal instability of rat muscle sarcoplasmic reticulum Ca(2+)-ATPase function

To examine the thermal instability and the role of sulfhydryl (SH) oxidation on sarcoplasmic reticulum (SR) Ca(2+)-ATPase function, crude homogenates were prepared from the white portion of the gastrocnemius (WG) adult rat muscles (n = 9) and incubated in vitro for < or =60 min either at a normal resting body temperature (37 degrees C) or at a temperature indicative of exercise-induced hyperthermia (41 degrees C) with DTT and without DTT (CON). In general, treatment with DTT resulted in higher Ca(2+)-ATPase and Ca(2+) uptake values (nmol. mg protein(-1). min(-1), P < 0.05), an effect that was not specific to time of incubation. Incubations at 41 degrees C resulted in lower (P < 0.05) Ca(2+) uptake rates (156 +/- 18 and 35.9 +/- 3.3) compared with 37 degrees C (570 +/- 54 and 364 +/- 26) at 30 and 60 min, respectively. At 37 degrees C, ryanodine (300 microM), which was used to block Ca(2+) release from the calcium release channel, prevented the time-dependent decrease in Ca(2+) uptake. A general inactivation (P < 0.05) of maximal Ca(2+)-ATPase activity (V(max)) in CON was observed with incubation time (0 > 30 > 60 min), with the effect being more pronounced (P < 0.05) at 41 degrees C compared with 37 degrees C. The Hill slope, a measure of co-operativity, and the pCa(50), the cytosolic Ca(2+) concentration required for half-maximal activation of Ca(2+)-ATPase activity, decreased (P < 0.05) at 41 degrees C only. Treatment with DTT attenuated the alterations in enzyme kinetics. The increase in V(max) with the Ca(2+) ionophore A-23187 was less pronounced at 41 degrees C compared with 37 degrees C. It is concluded that exposure of homogenates to a temperature typically experienced in exercise results in a reduction in the coupling ratio, which is mediated primarily by lower Ca(2+) uptake and occurs as a result of increases in membrane permeability to Ca(2+). Moreover, the decreases in Ca(2+)-ATPase kinetics in WG with sustained heat stress result from SH oxidation.     

Regulation of cardiac sarcoplasmic reticulum (Ca2+ + Mg2+)-ATPase

Summary The two high affinity calcium binding sites of the cardiac (Ca²⁺ + Mg²⁺)-ATPase have been identified with the use of Eu³⁺. Eu³⁺ competes for the two high affinity calcium sites on the enzyme. With the use of laser-pulsed fluorescent spectroscopy, the environment of the two sites appear to be heterogeneous and contain different numbers of H₂O molecules coordinated to the ion. The ion appears to be occluded even further in the presence of ATP. Using non-radiative energy transfer studies, we were able to estimate the distance between the two Ca²⁺ sites to be between 9.4 to 10.2 A in the presence of ATP. Finally, from the assumption that the calcium site must contain four carboxylic side chains to provide the 6–8 ligands needed to coordinate calcium, and based on our recently published data, we predict the peptidic backbone of the two sites.     

Fluoroaluminate complexes are bifunctional analogues of phosphate in sarcoplasmic reticulum Ca(2+)-ATPase.

The mechanism of inhibition of the sarcoplamc reticulum (SR) Ca(2+)-ATPase by the fluoroaluminate complexes was investigated. First, AlF4- was shown to bind to the Ca(2+)-free conformation of the enzyme by a slow quasi-irreversible process. The rate constants of the reaction are k+ = 16 x 10(3) M-1 s-1 and k- < 1.5 10(-3) s-1. We directly measured a stoichiometry of about 4.8 nmol of AlF4- bound/mg of protein. Mg2+ was a necessary cofactor for the reaction with a dissociation constant of 3 mM. It was demonstrated (Dupont, Y., and Pougeois, R. (1983) FEBS Lett. 156, 93-98) that phosphorylation by P(i) induced a dehydration of the catalytic site. The same process has been shown here to occur upon AlF4- binding either by the use of Me2SO or by demonstration of an increase of bound 2',3'-O-(2,4,6-trinitrocyclohexadienyldene)adenosine triphosphate fluorescence. Phosphorylation by P(i) is inhibited by the binding of AlF4-. Second, a fluoroaluminate complex, presumably AlF4-, was also shown to bind to the Ca(2+)-bound conformation of the Ca(2+)-ATPase in the presence of ADP and stabilize a E1.Ca2.ADP.AlFx complex. The dissociation constant of the nucleotidic site for ADP was shifted to the micromolar range. The Ca2+ ions bound on the external high affinity sites became occluded upon binding of (ADP + AlFx). We propose that AlF4- mimics P(i) binding to the Ca(2+)-free conformation of the ATPase and stabilizes an intermediate similar to the acyl-phosphate derivative; it also acts as an analogue of the gamma-phosphate of ATP and stabilizes an E1.[Ca2].ADP.AlF4 complex where the Ca2+ ions are occluded.     

Mapping epitopes on the (Ca(2+)-Mg2+)-ATPase of sarcoplasmic reticulum using fusion proteins.

Epitopes for a number of monoclonal antibodies (mAbs) binding (Ca(2+)-Mg2+)-ATPase purified from skeletal muscle sarcoplasmic reticulum have been defined by studying binding to fusion proteins generated from cDNA fragment libraries. Comparison of these results with those of previous studies of binding of mAbs to proteolytic fragments of the ATPase have allowed the definition of the epitopes to within approx. 100 residues and for one (mAb 1/2H7) to within 45 residues. The experiments suggest considerable exposure of the nucleotide binding domain of the ATPase on the top surface of the protein. Those mAbs that were found to inhibit steady-state ATPase activity were found to bind to epitopes in the nucleotide binding domain of the ATPase.     

Structural basis of ion pumping by Ca(2+)-ATPase of sarcoplasmic reticulum

The structures of the Ca(2+)-ATPase (SERCA1a) have been determined for five different states by X-ray crystallography. Detailed comparison of the structures in the Ca(2+)-bound form and unbound (but thapsigargin-bound) form reveals that very large rearrangements of the transmembrane helices take place accompanying Ca2+ dissociation and binding and that they are mechanically linked with equally large movements of the cytoplasmic domains. The meanings of the rearrangements of the transmembrane helices and those of the cytoplasmic domains, and the mechanistic roles of the phosphorylation are now becoming clear.     

Interactions of hexachlorocyclohexanes with the (Ca2+ + Mg2+)-ATPase from sarcoplasmic reticulum

Hexachlorocyclohexanes have been shown to inhibit the (Ca2+ + Mg2+)-ATPase of muscle sarcoplasmic reticulum reconstituted into bilayers of dioleoylphosphatidylcholine. However, for the ATPase reconstituted into bilayers of dimyristoleoylphosphatidylcholine, a pattern of activation at low concentration followed by inhibition at higher concentration is seen for hexachlorocyclohexanes and alkanes such as decane and hexadecane. The ATPase in sarcoplasmic reticulum vesicles is also inhibited by the hexachlorocyclohexanes. The effects of hexachlorocyclohexanes on activity are largely independent of concentrations of Ca2+ and ATP. Inhibition is more marked at lower temperatures. The hexachlorocyclohexanes quench the tryptophan fluorescence of the ATPase, and the quenching can be used to obtain partition coefficients into the membrane system. As for simple lipid bilayers, partition exhibits a negative temperature coefficient. Binding is related to effects on ATPase activity.     

Kinetic characterization of the perturbation by dodecylmaltoside of sarcoplasmic reticulum Ca(2+)-ATPase.

We investigated the functional aspects of the interaction between the sarcoplasmic reticulum (SR) membranous Ca(2+)-ATPase and the non-ionic detergent dodecylmaltoside, using detergent concentrations allowing perturbation of the membrane but not its solubilization. At pH 7.5, the effects of dodecylmaltoside on ATPase activity and delipidation had previously been shown to resemble, in some respects, those of octa(ethylene glycol) monododecylether (C12E8), an appropriate detergent for ATPase studies. Our aim here was to explore the specific effects of dodecylmaltoside on the different steps in the ATPase catalytic cycle, which may owe their specificity to the difference between the polar head groups of dodecylmaltoside and C12E8. This was done at 20 degrees C, both at pH 6 in the absence of KCl and at pH 7.5 in the presence of 100 mM KCl, two conditions under which the characteristics of unperturbed ATPase have already been well defined. Preliminary estimation of dodecylmaltoside partition between water and SR membranes at pH 6 yielded a partition coefficient K close to 4 x 10(5) (ratio of the molar fraction of dodecylmaltoside in the lipid to that in the aqueous phase at a low detergent concentration, assuming that most of this detergent was present in the lipid phase). At near saturation of SR membranes, bound dodecylmaltoside was roughly equimolar with the constituent phospholipids. Non-solubilizing concentrations of dodecylmaltoside inhibited SR ATPase activity by up to 65-70% at pH 7.5, but not at pH 6, unlike the results of similar experiments with C12E8. The rates of the four main steps in the ATPase catalytic cycle were measured by fast kinetic techniques; they were similarly modified at both pH. Dodecylmaltoside slowed down both the rate of calcium-saturated ATPase phosphorylation and the rate of ATPase isomerization after phosphorylation, two steps which were not targets of perturbation by C12E8. The slowing down of the isomerization step by dodecylmaltoside might well explain why it inhibited overall ATPase activity at pH 7.5. In contrast to C12E8, dodecylmaltoside did not affect the dephosphorylation step, which was the main target of inhibition by C12E8 and the main rate-limiting step at pH 6. However, like C12E8, dodecylmaltoside accelerated the calcium binding-induced transition of nonphosphorylated ATPase. Another striking feature of the perturbation induced by dodecylmaltoside was that it significantly altered the binding of 45Ca2+ to the ATPase and the corresponding conformational changes. At pCa 5-5.5, it almost halved calcium binding to the ATPase but ATPase phosphorylation was unimpaired.(ABSTRACT TRUNCATED AT 400 WORDS)     

Plausible stoichiometry of the interacting nucleotide-binding sites in the Ca(2+)-ATPase from sarcoplasmic reticulum membranes.

The Ca(2+),Mg(2+)-ATPase from sarcoplasmic reticulum couples ATP hydrolysis to Ca(2+) transport toward the lumen of the muscular vesicular system. Combined structural and functional studies suggest that the Ca(2+) binding sites are formed by six amino acids of the same polypeptide and that cation translocation may take place through a channel inside a monomer of the ATPase. However, calorimetric, fluorescent, and kinetic studies suggest that the ATPase may assemble into functional oligomers of as yet unknown stoichiometry. We have addressed this question and attempted to determine the ATPase stoichiometry using a biophysical approach based on the analysis of the ATPase inhibition by fluorescein 5'-isothiocyanate in the presence of increasing ATP concentrations. For native SR membranes, our inhibition data are well described by a model consisting of two interacting nucleotide-binding sites per oligomer. This stoichiometry was disrupted in detergent C(12)E(8)-solubilized ATPase. Thus, these findings suggest that interacting nucleotide binding sites of the ATPase may appear as dimers, and imply that interactions of the globular cytoplasmic domains would play a modulatory role of the protein enzymatic activity.     

Two-dimensional structure of phospholipase induced crystals of Ca2+-ATPase from sarcoplasmic reticulum

A two-dimensional projection map was computed of the Ca²⁺-ATPase molecules in sarcoplasmic reticulum, isolated from rabbit skeletal muscle. Crystalline arrays of Ca²⁺-ATPase molecules were formed by incubating the membrane vesicles with phospholipase A₂ and dialysing against Tris/HCl buffer. Ca²⁺-ATPase molecules appear as quasi-triangular blobs in the projection map and seem to form dimers. The projection map seems to indicate an enzyme conformation somewhat similar to vanadate-induced crystals but different from lanthanide-induced crystals of Ca^2*-ATPase.     

N-terminal chimeric constructs improve the expression of sarcoplasmic reticulum Ca(2+)-ATPase in yeast.

Wild-type and chimeric constructs comprising rabbit sarcoplasmic reticulum (SR) Ca(2+)-ATPase and the N-terminal cytoplasmic portion of yeast plasma membrane H(+)-ATPase were expressed in yeast under control of a heat-shock regulated promoter. The wild-type ATPase was found predominantly in endoplasmic reticulum (ER) membranes. Addition of the first 88 residues of H(+)-ATPase to the Ca(2+)-ATPase N-terminal end promoted a marked shift in the localization of chimeric H(+)/Ca(2+)-ATPase which accumulated in a light membrane fraction associated with yeast smooth ER. Furthermore, there was a three-fold increase in the overall level of expression of chimeric H(+)/Ca(2+)-ATPase. Similar results were obtained for a chimeric Ca(2+)-ATPase containing a hexahistidine sequence added to its N-terminal end. Both H(+)/Ca(2+)-ATPase and 6xHis-Ca(2+)-ATPase were functional as demonstrated by their ability to form a phosphorylated intermediate and undergo fast turnover. Conversely, a replacement chimera in which the N-terminal end of SR Ca(2+)-ATPase was replaced by the corresponding segment of H(+)-ATPase was not stably expressed in yeast membranes. These results indicate that the N-terminal segment of Ca(2+)-ATPase plays an important role in enzyme assembly and contains structural determinants necessary for ER retention of the ATPase.     

Immunological relatedness of the sarcoplasmic reticulum Ca(2+)-ATPase and the Na+,K(+)-ATPase.

The effect of anti-ATPase antibodies with epitopes near Asp-351 (PR-8), Lys-515 (PR-11) and the ATP binding domain (D12) of the Ca(2+)-ATPase of sarcoplasmic reticulum (EC 3.6.1.38) was analyzed. The PR-8 and D12 antibodies reacted freely with the Ca(2+)-ATPase in the native membrane, indicating that their epitopes are exposed on the cytoplasmic surface. Both PR-8 and D12 interfered with the crystallization of the Ca(2+)-ATPase, suggesting that their binding sites are at interfaces between ATPase molecules. PR-11 had no effect on ATPase-ATPase interactions or on the ATPase activity of sarcoplasmic reticulum. The epitope of PR-11 is suggested to be the VIDRC sequence at residues 520-525, while that of D12 at residues 670-720 of the Ca(2+)-ATPase. The use of predictive algorithms of antigenicity for identification of potential antigenic determinants in the Ca(2+)-ATPase is analyzed.     

Structure of the vanadate-induced crystals of sarcoplasmic reticulum Ca2+-ATPase

The projected structure of the vanadate-induced crystalline aggregates of Ca2+-ATPase molecules in isolated sarcoplasmic reticulum membranes has been determined. The molecules form tubular crystals with an oblique surface lattice having cell dimensions a = 65.9 A, b = 114.4 A and gamma = 77.9 degrees. The space group is P2. The crystalline tubules are formed through lateral aggregation of chains made up of dimers of Ca2+-ATPase molecules.     

Inhibition by A23187 of conformational changes involved in the Ca(2+)-induced activation of sarcoplasmic reticulum Ca(2+)-ATPase.

We previously showed that A23187 in high ionophore/protein ratios almost completely inhibits the sarcoplasmic reticulum Ca(2+)-ATPase [Hara, H. & Kanazawa, T. (1986) J. Biol. Chem. 261, 16584-16590]. In an attempt to obtain information on the mechanism of this inhibition, the effects of A23187 on conformational changes involved in the Ca(2+)-induced activation of the enzyme were investigated. The purified enzyme from sarcoplasmic reticulum of rabbit skeletal muscle as well as the purified enzyme labeled with fluorescein 5-isothiocyanate (FITC) were preincubated with A23187 in the absence of Ca2+ at pH 7.0 and 0 degrees C for 45 min. The activation of the enzyme following addition of CaCl2 was assessed by determining the capacity for rapid formation of phosphoenzyme from ATP. This activation was strongly inhibited by the preincubation with A23187. This indicates that the previously observed inhibition of the Ca(2+)-ATPase is mostly due to hindrance of the Ca(2+)-induced activation of the enzyme. In the control, in which the FITC-labeled enzyme was preincubated without A23187, the fluorescence intensity of the bound FITC decreased in a biphasic manner upon addition of CaCl2. The first rapid phase of this fluorescence drop was unaffected by A23187, whereas its second slow phase was almost completely inhibited by this drug. These results show that the Ca(2+)-dependent conformational change is biphasic and that the second slow phase (but not the first rapid phase) of this conformational change is inhibited by A23187. This suggests that the observed inhibition of Ca2+ activation is attributed to hindrance of the second slow phase of the Ca(2+)-dependent conformational change.