Ions binding to S100 proteins. I. Calcium- and zinc-binding properties of bovine brain S100 alpha alpha, S100a (alpha beta), and S100b (beta beta) protein: Zn2+ regulates Ca2+ binding on S100b protein

Flow dialysis measurements of calcium binding to bovine brain S100 alpha alpha, S100a (alpha beta), and S100b (beta beta) proteins in 20 mM Tris-HCl buffer at pH 7.5 and 8.3 revealed that S100 proteins bind specifically 4 Ca2+ eq/mol of protein dimer. The specific calcium-binding sites had, therefore, been assigned to typical amino acid sequences on the alpha and beta subunit. The protein affinity for calcium is much lower in the presence of magnesium and potassium. Potassium strongly antagonizes calcium binding on two calcium-binding sites responsible for most of the Ca2+-induced conformational changes on S100 proteins (probably site II alpha and site II beta). Zinc-binding studies in the absence of divalent cations revealed eight zinc-binding sites/mol of S100b protein dimer that we assumed to correspond to 4 zinc-binding sites/beta subunit. Zinc binding to S100b studied with UV spectroscopy methods showed that the occupation of the four higher affinity sites and the four lower affinity sites on the protein dimer were responsible for different conformational changes in S100b structure. Zinc binding on the higher affinity sites regulates calcium binding to S100b by increasing the protein affinity for calcium and decreasing the antagonistic effect of potassium on calcium binding. Zinc-binding studies on S100a and S100 alpha alpha protein showed that the Trp-containing S100 proteins bind zinc more weakly than S100b protein. Calcium-binding studies on zinc-bound S100a proved that calcium- and zinc-binding sites were distinct although there was no increase in zinc-bound S100a affinity for calcium, as in S100b protein. Finally we provide evidence that discrepancies between previously published results on the optical properties of S100b protein probably result from oxidation of the sulfhydryl groups in the protein.     

Ions binding to S100 proteins. II. Conformational studies and calcium-induced conformational changes in S100 alpha alpha protein: the effect of acidic pH and calcium incubation on subunit exchange in S100a (alpha beta) protein

A rapid separation method for bovine brain S100 alpha alpha, S100a, and S100b protein using fast protein liquid chromatography on a Mono Q column and its application in preparation of a large amount of S100 alpha alpha protein are described. The conformation of S100 alpha alpha in the metal-free forms as well as in the presence of calcium were studied by UV absorption, circular dichroism, intrinsic fluorescence, sulfhydryl reactivity, and interaction with a hydrophobic fluorescent probe. The alpha-subunit appears to have nearly identical conformation in S100 alpha alpha and S100a protein dimers. We also confirmed that only the alpha-subunit exposes hydrophobic domains to solvent in the presence of calcium and that cysteine residues exposed upon Ca2+ binding to S100 proteins correspond to Cys 85 alpha and Cys 84 beta. Incubation of S100a with calcium and KCl proved that calcium binding to the putative calcium-binding sites (site I alpha, I beta) triggers a time- and temperature-dependent conformational change in the protein structure which decreases the antagonistic effect of KCl on calcium binding to sites II alpha and II beta and provokes subunit exchanges between protein dimers and the emergence of S100 alpha alpha and S100b (beta beta) proteins. Dynamic fluorescence measurements showed that incubating calcium at high S100a protein concentrations (greater than 10(-5) M) induces an apparent slow dimer-monomer equilibrium which might result in total subunit dissociation at lower protein concentrations. The effect of acidic pH on subunit dissociation in S100a protein (Morero, R. D., and Weber, G. (1982) Biochim. Biophys. Acta 703, 231-240) arises from conformational changes in the protein structure that are similar to those induced by Ca2+ incubation.     

The structure of Ca2+-loaded S100A2 at 1.3-Å resolution

S100A2 is an EF-hand calcium ion (Ca(2+))-binding protein that activates the tumour suppressor p53. In order to understand the molecular mechanisms underlying the Ca(2+) -induced activation of S100A2, the structure of Ca(2+)-bound S100A2 was determined at 1.3 ? resolution by X-ray crystallography. The structure was compared with Ca(2+) -free S100A2 and with other S100 proteins. Binding of Ca(2+) to S100A2 induces small structural changes in the N-terminal EF-hand, but a large conformational change in the C-terminal EF-hand, reorienting helix III by approximately 90°. This movement is accompanied by the exposure of a hydrophobic cavity between helix III and helix IV that represents the target protein interaction site. This molecular reorganization is associated with the breaking and new formation of intramolecular hydrophobic contacts. The target binding site exhibits unique features; in particular, the hydrophobic cavity is larger than in other Ca(2+)-loaded S100 proteins. The structural data underline that the shape and size of the hydrophobic cavity are major determinants for target specificity of S100 proteins and suggest that the binding mode for S100A2 is different from that of other p53-interacting S100 proteins. Database Structural data are available in the Protein Data Bank database under the accession number 4DUQ     

Analysis of the structure of human apo-S100B at low temperature indicates a unimodal conformational distribution is adopted by calcium-free S100 proteins

S100B is one of the best-characterized members of the calcium-signaling S100 protein family. Most S100 proteins are dimeric, with each monomer containing two EF-hand calcium-binding sites (EF1, EF2). S100B and other S100 proteins respond to calcium increases in the cell by coordinating calcium and undergoing a conformational change that allows them to interact with a variety of cellular targets. Although several three dimensional structures of S100 proteins are available in the calcium-free (apo-) state it has been observed that these structures appear to adopt a wide range of conformations in the EF2 site with respect to the positioning of helix III, the helix that undergoes the most dramatic calcium-induced conformational change. In this work, we have determined the structure of human apo-S100B at 10 degrees C to examine whether temperature might be responsible for these structural differences. Further, we have used this data, and other available apo-S100 structures, to show that despite the range of interhelical angles adopted in the apo-S100 structures, normal Gaussian distributions about the mean angles found in the structure of human apo-S100B are observed. This finding, only obvious from the analysis of all available apo-S100 proteins, provides direct structural evidence that helix III is a loosely packed helix. This is likely a necessary functional property of the S100 proteins that facilitates the calcium-induced conformational change of helix III. In contrast, the calcium-bound structures of the S100 proteins show significantly smaller variability in the interhelical angles. This shows that calcium binding to the S100 proteins causes not only a conformational change but results in a tighter distribution of helices within the EF2 calcium binding site required for target protein interactions.     

Solution structure and dynamics of S100A5 in the apo and Ca2+-bound states

S100A5 is a calcium binding protein of the S100 family, with one canonical and one S100-specific EF-hand motif per subunit. Although its function is still unknown, it has recently been reported to be one of the S100 proteins able to interact with the receptor for advanced glycation end products. The homodimeric solution structures of S100A5 in both the apo and the calcium(II)-loaded forms have been obtained, and show a conformational rearrangement upon calcium binding. This rearrangement involves, in particular, the hinge loop connecting the N-terminal and the C-terminal EF-hand domains, the reorientation of helix III with respect to helix IV, as common to several S100 proteins, and the elongation of helix IV. The details of the structural changes are important because they must be related to the different functions, still largely unknown, of the different members of the S100 family. For the first time for a full-length S100 protein, relaxation measurements were performed on both the apo and the calcium-bound forms. A quite large mobility was observed in the hinge loop, which is not quenched in the calcium form. The structural differences resulting upon calcium binding change the global shape and the distribution of hydrophobic and charged residues of the S100A5 homodimer in a modest but significantly different manner with respect to the closest homologues S100A4 and S100A6.     

Comparison of S100b protein with calmodulin: interactions with melittin and microtubule-associated tau proteins and inhibition of phosphorylation of tau proteins by protein kinase C

To gauge similarities between S100b protein and calmodulin, interactions were observed between S100b and melittin and between S100b and tau, the microtubule-associated proteins. The interaction of melittin with S100b protein in the presence and absence of calcium was studied by fluorescence polarization, UV difference spectroscopy, and sulfhydryl derivatization. Whether calcium was present or not in the solution, melittin and S100b form a complex of molar ratios up to 2:1. Further binding of melittin occurred, but it resulted in precipitation of S100b, as is true of the corresponding case of melittin binding to calmodulin. In the absence of calcium, the interaction of melittin and S100b shielded the tryptophan (Trp) of the former protein and exposed cysteine-84 beta (Cys-84 beta) of the latter protein, leaving the tyrosine-16 beta (Tyr-16 beta) of S100b unaffected. Calcium addition to the complex partially restored the exposure of Trp of melittin and caused changes in the environment of Tyr-16 beta (unlike the environmental changes induced for Tyr-16 beta by calcium in the absence of melittin). The conformational changes induced in S100b by interaction with melittin increased its affinity for calcium and offset the inhibition of calcium binding otherwise observed in the presence of potassium ions. This corroborated the previous finding that S100b affinity for calcium greatly depends on the protein conformation. The phenomena described above are similar to the interactions of melittin with calmodulin and thus suggest that S100b and calmodulin have a common structural domain not only that binds melittin but also that may interact with common target proteins.(ABSTRACT TRUNCATED AT 250 WORDS)     

Identification of regions responsible for the open conformation of S100A10 using chimaeric S100A11-S100A10 proteins

S100A11 is a dimeric EF-hand calcium-binding protein. Calcium binding to S100A11 results in a large conformational change that uncovers a broad hydrophobic surface used to interact with phospholipid-binding proteins (annexins A1 and A2) and facilitate membrane vesiculation events. In contrast with other S100 proteins, S100A10 is unable to bind calcium due to deletion and substitution of calcium-ligating residues. Despite this, calcium-free S100A10 assumes an 'open' conformation that is very similar to S100A11 in its calcium-bound state. To understand how S100A10 is able to adopt an open conformation in the absence of calcium, seven chimaeric proteins were constructed where regions from calcium-binding sites I and II, and helices II-IV in S100A11 were replaced with the corresponding regions of S100A10. The chimaeric proteins having substitutions in calcium-binding site II displayed increased hydrophobic surface exposure as assessed by bis-ANS (4,4'-dianilino-1,1'-binaphthyl-5,5'disulfonic acid, dipotassium salt) fluorescence and phenyl-Sepharose binding in the absence of calcium. This response is similar to that observed for Ca2+-S100A11 and calcium-free S100A10. Further, this substitution resulted in calcium-insensitive binding to annexin A2 for one chimaeric protein. The results indicate that residues within site II are important in stabilizing the open conformation of S100A10 and presentation of its target binding site. In contrast, S100A11 chimaeric proteins with helical substitutions displayed poorer hydrophobic surface exposure and, consequently, unobservable annexin A2 binding. The present study represents a first attempt to systematically understand the molecular basis for the calcium-insensitive open conformation of S100A10.     

Natural and amyloid self-assembly of S100 proteins: structural basis of functional diversity

The S100 proteins are 10-12 kDa EF-hand proteins that act as central regulators in a multitude of cellular processes including cell survival, proliferation, differentiation and motility. Consequently, many S100 proteins are implicated and display marked changes in their expression levels in many types of cancer, neurodegenerative disorders, inflammatory and autoimmune diseases. The structure and function of S100 proteins are modulated by metal ions via Ca(2+) binding through EF-hand motifs and binding of Zn(2+) and Cu(2+) at additional sites, usually at the homodimer interfaces. Ca(2+) binding modulates S100 conformational opening and thus promotes and affects the interaction with p53, the receptor for advanced glycation endproducts and Toll-like receptor 4, among many others. Structural plasticity also occurs at the quaternary level, where several S100 proteins self-assemble into multiple oligomeric states, many being functionally relevant. Recently, we have found that the S100A8/A9 proteins are involved in amyloidogenic processes in corpora amylacea of prostate cancer patients, and undergo metal-mediated amyloid oligomerization and fibrillation in vitro. Here we review the unique chemical and structural properties of S100 proteins that underlie the conformational changes resulting in their oligomerization upon metal ion binding and ultimately in functional control. The possibility that S100 proteins have intrinsic amyloid-forming capacity is also addressed, as well as the hypothesis that amyloid self-assemblies may, under particular physiological conditions, affect the S100 functions within the cellular milieu.     

The three-dimensional solution structure of Ca(2+)-bound S100A1 as determined by NMR spectroscopy

S100A1 is an EF-hand-containing Ca(2+)-binding protein that undergoes a conformational change upon binding calcium as is necessary to interact with protein targets and initiate a biological response. To better understand how calcium influences the structure and function of S100A1, the three-dimensional structure of calcium-bound S100A1 was determined by multidimensional NMR spectroscopy and compared to the previously determined structure of apo. In total, 3354 nuclear Overhauser effect-derived distance constraints, 240 dihedral constraints, 160 hydrogen bond constraints, and 362 residual dipolar coupling restraints derived from a series of two-dimensional, three-dimensional, and four-dimensional NMR experiments were used in its structure determination (>21 constraints per residue). As with other dimeric S100 proteins, S100A1 is a symmetric homodimer with helices 1, 1', 4, and 4' associating into an X-type four-helix bundle at the dimer interface. Within each subunit there are four alpha-helices and a short antiparallel beta-sheet typical of two helix-loop-helix EF-hand calcium-binding domains. The addition of calcium did not change the interhelical angle of helices 1 and 2 in the pseudo EF-hand significantly; however, there was a large reorientation of helix 3 in the typical EF-hand. The large conformational change exposes a hydrophobic cleft, defined by residues in the hinge region, the C terminus, and regions of helix 3, which are important for the interaction between S100A1 and a peptide (TRTK-12) derived from the actin-capping protein CapZ.     

Structural characterization of human S100A16, a low-affinity calcium binder

The homodimeric structure of human S100A16 in the apo state has been obtained both in the solid state and in solution, resulting in good agreement between the structures with the exception of two loop regions. The homodimeric solution structure of human S100A16 was also calculated in the calcium(II)-bound form. Differently from most S100 proteins, the conformational rearrangement upon calcium binding is minor. This characteristic is likely to be related to the weak binding affinity of the protein for the calcium(II) ions. In turn, this is ascribed to the lack of the glutamate residue at the end of the S100-specific N-domain binding site, which in most S100 proteins provides two important side chain oxygen atoms as calcium(II) ligands. Furthermore, the presence of hydrophobic interactions stronger than for other S100 proteins, present in the closed form of S100A16 between the third and fourth helices, likely make the closed structure of the second EF-hand particularly stable, so even upon calcium(II) binding such a conformation is not disrupted.     

Crystal structure of metastasis-associated protein S100A4 in the active calcium-bound form

S100A4 (metastasin) is a member of the S100 family of calcium-binding proteins that is directly involved in tumorigenesis. Until recently, the only structural information available was the solution NMR structure of the inactive calcium-free form of the protein. Here we report the crystal structure of human S100A4 in the active calcium-bound state at 2.03 Å resolution that was solved by molecular replacement in the space group P6₅ with two molecules in the asymmetric unit from perfectly merohedrally twinned crystals. The Ca^2 +-bound S100A4 structure reveals a large conformational change in the three-dimensional structure of the dimeric S100A4 protein upon calcium binding. This calcium-dependent conformational change opens up a hydrophobic binding pocket that is capable of binding to target proteins such as annexin A2, the tumor-suppressor protein p53 and myosin IIA. The structure of the active form of S100A4 provides insight into its interactions with its binding partners and a better understanding of its role in metastasis.     

Amide exchange shows calcium-induced conformational changes are transmitted to the dimer interface of S100B

S100B is a 21 kDa member of the S100 calcium-binding protein family. This protein comprises a symmetric homodimer with each subunit having two EF-hands arranged from four alpha-helices (I-IV). S100B binds calcium and undergoes a conformation change leading to the exposure of hydrophobic surface residues that enable the protein to interact with biological target molecules. The most significant structural change that occurs during calcium binding results in a change in the orientation of helix III with respect to helices II and IV. In this work, the calcium-sensitive conformational change has been studied by utilizing fast 1H-15N HSQC experiments and water-transfer methods to follow the amide exchange in apo-S100B and Ca-S100B at 35 degrees C. In apo-S100B, the protection factors are 2-3 orders of magnitude lower for helix III than for helix I, II, or IV. In addition, the exchange stability measured here for the dimer interface helices (I, I', IV, and IV'), in the absence of calcium, is similar to the stability obtained from chemical denaturation experiments. When calcium binds, significant decreases in the protection factors for helices I and IV indicate a modification in the stability of the dimer interface has occurred. In contrast, helix II protection factors increase slightly, which is consistent with a decreased level of surface exposure of this helix. These data have been compared with those of the monomeric S100 protein, calbindin D9k, to illustrate that upon calcium binding there is a balance maintained between the amide exchange rates in helices II and III, although largely the rates are dissimilar for each of these proteins. This distinguishing feature may be important for the calcium-induced conformational change in S100B, where calcium binding is transmitted to the dimer-forming helices.     

Letter to the Editor: 1H, 15N and 13C resonance assignments of rabbit apo-S100A11

S100 proteins belong to the EF-hand family of calcium binding proteins. Upon calcium binding, these proteins undergo a conformational change to expose a hydrophobic region necessary for target protein interaction. One member of the S100 protein family is S100A11, first isolated from chicken gizzard and termed calgizzarin. It was later isolated from other organisms and tissues including human placenta, pig heart and rabbit lung. The physiological target of S100A11 is thought to be annexin I, a phospholipid-binding protein involved in EGF receptor sorting. This work reports the ¹H, ¹⁵N and ¹³C resonance assignments of rabbit apo-S100A11 determined using ¹⁵N, ¹³C-labelled protein and multidimensional NMR spectroscopy.     

Unmasking the annexin I interaction from the structure of Apo-S100A11

S100A11 is a homodimeric EF-hand calcium binding protein that undergoes a calcium-induced conformational change and interacts with the phospholipid binding protein annexin I to coordinate membrane association. In this work, the solution structure of apo-S100A11 has been determined by NMR spectroscopy to uncover the details of its calcium-induced structural change. Apo-S100A11 forms a tight globular structure having a near antiparallel orientation of helices III and IV in calcium binding site II. Further, helices I and IV, and I and I', form a more closed arrangement than observed in other apo-S100 proteins. This helix arrangement in apo-S100A11 partially buries residues in helices I (P3, E11, A15), III (V55, R58, M59), and IV (A86, C87, S90) and the linker (A45, F46), which are required for interaction with annexin I in the calcium-bound state. In apo-S100A11, this results in a "masked" binding surface that prevents annexin I binding but is uncovered upon calcium binding.     

Electrophoretic mobility shift in native gels indicates calcium-dependent structural changes of neuronal calcium sensor proteins

In proteins of the neuronal calcium sensor (NCS) family, changes in structure as well as function are brought about by the binding of calcium. In this article, we demonstrate that these structural changes, solely due to calcium binding, can be assessed through electrophoresis in native gels. The results demonstrate that the NCS proteins undergo ligand-dependent conformational changes that are detectable in native gels as a gradual decrease in mobility with increasing calcium but not other tested divalent cations such as magnesium, strontium, and barium. Surprisingly, such a gradual change over the entire tested range is exhibited only by the NCS proteins but not by other tested calcium-binding proteins such as calmodulin and S100B, indicating that the change in mobility may be linked to a unique NCS family feature—the calcium–myristoyl switch. Even within the NCS family, the changes in mobility are characteristic of the protein, indicating that the technique is sensitive to the individual features of the protein. Thus, electrophoretic mobility on native gels provides a simple and elegant method to investigate calcium (small ligand)-induced structural changes at least in the superfamily of NCS proteins.     

Rat Brain S100b Protein: Purification, Characterization, and Ion Binding Properties. A Comparison with Bovine S100b Protein

We purified to homogeneity rat brain S100b protein, which constitutes about 90% of the soluble S100 protein fraction. Purified rat S100b protein comigrates with bovine S100b protein in nondenaturant system electrophoresis but differs in its amino acid composition and in its electrophoretic mobility in urea-sodium dodecyl sulfate-polyacrylamide gel with bovine S100b protein. The properties of the Ca2+ and Zn2+ binding sites on rat S100b protein were investigated by flow dialysis and by fluorometric titration, and the conformation of rat S100b in its metal-free form as well as in the presence of Ca2+ or Zn2+ was studied. The results were compared with those obtained for the bovine S100b protein. In the absence of KCl, rat brain S100b protein is characterized by two high-affinity Ca2+ binding sites with a KD of 2 X 10(-5) M and four lower affinity sites with KD about 10(-4) M. The calcium binding properties of rat S100b protein differ from bovine S100b only by the number of low-affinity calcium binding sites whereas similar Ca2+-induced conformational changes were observed for both proteins. In the presence of 120 mM KCl rat brain S100b protein bound two Zn2+-ions/mol of protein with a KD of 10(-7) M and four other with lower affinity (KD approximately equal to 10(-6) M). The occupancy of the two high-affinity Zn2+ binding sites was responsible for most of the Zn2+-induced conformational changes in the rat S100b protein. No increase in the tyrosine fluorescence quantum yield after Zn2+ binding to rat S100b was observed.(ABSTRACT TRUNCATED AT 250 WORDS)     

Characterization of the metastasis-associated protein,S100A4. Roles of calcium binding and dimerization in cellular localization and interaction with myosin

Elevated S100A4 protein expression is associated with metastatic tumor progression and appears to be a strong molecular marker for clinical prognosis. S100A4 is a calcium-binding protein that is known to form homodimers and interacts with several proteins in a calcium-dependent manner. Here we show that S100A4 localizes to lamellipodia structures in a migrating breast cancer-derived cell line and colocalizes with a known S100A4-interacting protein, myosin heavy chain IIA, at the leading edge. We demonstrate that S100A4 mutants that are defective in either their ability to dimerize or in calcium binding are unable to interact with myosin heavy chain IIA. An S100A4 mutant that is deficient for calcium binding retains the ability to form homodimers, suggesting that S100A4 can exist as calcium-free or calcium-bound dimers in vivo. However, a calcium-bound S100A4 monomer only interacts with another calcium-bound monomer and not with an S100A4 mutant that does not bind calcium. Interestingly, despite the calcium dependence for interaction with known protein partners, calcium binding is not necessary for localization to lamellipodia. Both wild type and a mutant that is deficient for calcium binding colocalize with known markers of actively forming leading edges of lamellipodia, Arp3 and neuronal Wiskott-Aldrich syndrome protein. These data suggest that S100A4 localizes to the leading edge in a calcium-independent manner, and identification of the proteins that are involved in localizing S100A4 to the lamellipodial structures may provide novel insight into the mechanism by which S100A4 regulates metastasis.     

S100A6 Amyloid Fibril Formation Is Calcium-modulated and Enhances Superoxide Dismutase-1 (SOD1) Aggregation

S100A6 is a small EF-hand calcium- and zinc-binding protein involved in the regulation of cell proliferation and cytoskeletal dynamics. It is overexpressed in neurodegenerative disorders and a proposed marker for Amyotrophic Lateral Sclerosis (ALS). Following recent reports of amyloid formation by S100 proteins, we investigated the aggregation properties of S100A6. Computational analysis using aggregation predictors Waltz and Zyggregator revealed increased propensity within S100A6 helices H_I and H_IV. Subsequent analysis of Thioflavin-T binding kinetics under acidic conditions elicited a very fast process with no lag phase and extensive formation of aggregates and stacked fibrils as observed by electron microscopy. Ca²⁺ exerted an inhibitory effect on the aggregation kinetics, which could be reverted upon chelation. An FT-IR investigation of the early conformational changes occurring under these conditions showed that Ca²⁺ promotes anti-parallel β-sheet conformations that repress fibrillation. At pH 7, Ca²⁺ rendered the fibril formation kinetics slower: time-resolved imaging showed that fibril formation is highly suppressed, with aggregates forming instead. In the absence of metals an extensive network of fibrils is formed. S100A6 oligomers, but not fibrils, were found to be cytotoxic, decreasing cell viability by up to 40%. This effect was not observed when the aggregates were formed in the presence of Ca²⁺. Interestingly, native S1006 seeds SOD1 aggregation, shortening its nucleation process. This suggests a cross-talk between these two proteins involved in ALS. Overall, these results put forward novel roles for S100 proteins, whose metal-modulated aggregation propensity may be a key aspect in their physiology and function.     

The role of calcium in the conformational changes of the recombinant S100A8/S100A91

Calprotectin is a member of the EF-hand proteins, composed of two subunits, S100A8 (MRP8) and S100A9 (MRP14). These proteins are involved in important processes including cell signaling, regulation of inflammatory responses, cell cycle control, differentiation, regulation of ion channel activity and defense against microbial agents in a calcium dependent manner. In the present study, recombinant S100A8 and S100A9 were expressed in E. coli BL21 and then purified using Ni-NTA affinity chromatography. The structure of the S100A8/A9 complex in the presence and absence of calcium was assessed by circular dichroism and fluorescence spectroscopy. The intrinsic fluorescence emission spectra of the S100A8/A9 complex in the presence of calcium showed a reduction in fluorescence intensity, reflecting conformational changes within the protein with the exposure of aromatic residues to the protein surface. The far ultraviolet-circular dichroism spectra of the complex in the presence of calcium revealed minor changes in the regular secondary structure of the complex. Also, increased thermal stability of the S100A8/A9 complex in the presence of calcium was indicated.