Reduced Methylene Blue as a Stain for Crustacean Nerves

Effective in situ staining of crustacean nerves was achieved with leuco methylene blue reduced with either ascorbic acid or sodium hydrosulfite (Na₂S₂O₄). A stock solution of methylene blue, 0.4% (ca. 0.001 M), and the reductants, ascorbic acid or sodium hydrosulfite (0.01 M), were prepared in van Harreveld's crayfish physiological solution. Methylene blue stock solution was mixed with either of the reductants in the approximate ratio of 1:10, v/v, and titrated to the end point. Ascorbic acid reduction is light catalyzed and requires intense illumination during titration. The cleared or leucomethylene blue stock solution is suitable for immediate use as a working nerve stain. With either reductant, the working solution oxidizes on standing in air, but can be titrated repeatedly without loss of staining properties. Dissected nerve trunks or tissue were immersed in the working stain for 20 min at room temperature and the staining process observed until suitable contrast developed. Excess dye was decanted and the tissues flooded with crayfish physiological solution. Contrast could sometimes be enhanced by flooding the stained area with 1% hydrogen peroxide in van Harreveld's solution. When permanent mounts were prepared, tissues were dehydrated with tertiary butyl alcohol in preference to ethyl alcohol series. For anatomical and neurophysiological studies of nerve distribution in crustaceans, the alternative use of either ascorbic acid or sodium hydrosulfite, as reductants for methylene blue, was preferable to the more complicated rongalit-technique and characterization of neural elements was fully as satisfactory.     

Staining of Nerve Fibers with Methylene Blue Factors Improving the Staining

Several factors influencing the staining of nerve fibers with methylene blue, especially the influence of chloralhydrate and carbamylcholine chloride (as parasympathicotonics), and of some anesthetics were studied. The intestines of mouse, rat, and guinea pig were used. The following immersion technic is suggested: Tissue from animals anesthetised by chloralhydrate is immersed in: zinc free methylene blue, 0.03%; sodium tartrate, 0.5%; sodium pyruvate, 0.05% carbamylcholine, 0.00005%; 0.2 M Na₂HPO₄, 0.77%; 0.1 M citric acid, 0.18%; NACl, 0.79%; also an anesthetic which varies with the animal selected. Air is kept bubbling through the staining solution and microscopic examination is made at 6 min. intervals. After 0.5-1 hr. the tissue is fixed in: ammonium molyb-date, 10 g.; sucrose, 35 g.; distilled water, 100 ml.; to which is added just before use, 1% platinum chloride, 3 ml.; 2% osmic acid, 3 drops. Washing is in ice cold water and dehydration at 0°C. in Lang's fluids (varying mixtures of ethanol and n-butanol). The tissues thus prepared are stored in liquid paraffin.     

Composition of J.S.B. stain and Factors Affecting its Quality

Several samples of J.S.B. stain (Jaswant Singh and Bhattacharjee, 1944) solution 1 (polychrome methylene blue) were prepared with 3-8 hr for dichromate-acid oxidation and addition of varying quantities of Na₂HPO₄ buffer for pH adjustment. Storage under severe tropical conditions and periodical checks by staining Plasmodium cynomolgi smears revealed that staining solutions oxidized 6-7 hr with a final pH of 7.8 gave optimum results. Some precipitation of azures, due to heat after 5 mo, adversely affected the quality of staining solutions, while cooler storage conditions were most favorable. Spectrophotometric and chromatographic studies indicated that the J.S.B. solution 1 was composed of blue and purple components, corresponding to higher methylene azures with methylene blue and thionin with allied products respectively.     

Brazilin-Toluidine Blue O and Hematoxylin-Darrow Red Methods for Brain and Spinal Cord

Tissue fixed in 10% formalin, formalin-95% ethanol 1:s CaCO₂ or phosphate buffer neutralized formalin, or methanol-chloroform 2:1, was dehydrated and embedded in paraffin or double-embedded by infiltration in 1% celloidin followed by a chloroform-paraffin sequence. Sections were attached to slides with either albumen or gelatine adhesive and processed throughout at room temperature of 24-26 C. For either method, mordanting 30-60 min in 1% iron alum was followed by a 10 min wash in 4 changes of distilled water. For brazilin-toluidne blue O, myelin was stained for 20-60 min, depending upon section thickness, in a self-differentiating solution consisting of: 0.15% Li₂CO₃ 75 ml; 6% brazilin in 95% ethanol, 25 ml; and NaIO₃ 75 mg. After a thorough washing, Nissl material was stained for 3-8 min in a solution consisting of: 0.1 M acetic acid, 90 ml; 0.1 M sodium acetate, 10 ml; and 1% toluidine blue 0, 2.5 ml. For hematoxylin-Darrow red, myelin was stained for 2-6 hr in a self-differentiating solution consisting of: 0.15% Li₂,CO₃ 95 ml; 10% hematoxylin in 95% ethanol, 5 ml; and NaIO₃ 25 mg. After a thorough washing, Nissl material was stained for 20 min or less in a solution consisting of: 0.1 M acetic acid, 90 ml; 0.1 M sodium acetate, 10 ml; Darrow red, 25 mg. This mixture was first boiled, cooled to room temperature and filtered. In both methods, washing, dehydration, clearing, and mounting completed the process. In the brazilin-toluidine blue technic, myelin sheaths were stained reddish purple; neuronal nuclei light blue with dark granules of chromatin; nucleoli dark blue; and cytoplasm blue with dark blue Nissl granules. In the hematoxylin-Darrow red procedure, myelin sheaths were blue-black; nuclei light red with dark granules of chromatin; nucleoli almost black; and cytoplasm red with bright red Nissl granules.     

A Rhodocyan Technic for Staining the Anterior Pituitary

A reproducible, one-step, differential staining technic which uses routine formalin-fixed tissue and gives brilliantly contrasting results is produced by incubating sections for 1 hr in a 60° C oven in the following dye mixture: 1% eosin B (CI#771), 8 ml; 1% anilin blue (CI#707), 2 ml; and buffer solution (0.1M citric acid, 1.1 ml; 0.2M Na₂HPO₄, 0.9 ml; distilled water, 28.0 ml) at pH 4.5. No differentiation is necessary. The method can be modified for duodenal enterochromaffin cells and alpha cells of pancreatic islets by adjusting the buffer to pH 3.6 and staining for only 3 min at 60° C.     

Romanowsky-type staining: Enzymatic analysis of nuclear metachromasia in formalin-fixed paraffin sections

The red color of nuclei produced in formol-fixed paraffin sections stained with toluidine blue has been investigated by using deoxyribonuclease (DNase), ribonuclease (RNase) and 0.1 M Tris buffer. The action of DNase on formol-fixed material is not fully reliable, but clear-cut when positive. Nuclear basophilia and metachromasia is removed, nucleolar and cytoplasmic RNA is preserved. The picture produced by RNase depends to some extent on the concentration and acidity of the toluidine blue used for subsequent staining. Cytoplasmic RNA is always removed, while the red stain in nuclei usually remains intact. With 0.1% toluidine blue in 1% acetic acid, a nuclear color change from red to pale green is observed. Using this same staining solution, it can be shown that 0.1 M Tris buffer (overnight extraction at 37° C) will remove cytoplasmic RNA but leave intact the nuclear material that stains red. A red to green shift can subsequently be produced by RNase. From this it is deduced that there is a chromatin-associated nuclear RNA fraction which can be removed by the enzyme, but is stable to the buffer solution.     

Methylene Blue Staining of Axons in the Ventral Nerve Cord of Insects

Axons and some nerve cell bodies in the abdominal nerve cords of 5 species of insects were stained within 0.5-2 hr after intraabdominal or intrathoracic injection of a rongalit-reduced 0.4% methylene blue solution at pH 5. Leuco methylene blue solutions produced by Na₂S₂O₄, or by rongalit at a lower pH, were not as effective. Injection of the stain into an intact animal produced much better results than application to a dissected preparation. The stain was fixed with a cold, about 1.5% ammonium picrate solution followed by cold 8-15% ammonium molybdate. The nerve cord was removed, placed on a slide, dehydrated with t-butanol, cleared with xylene, and covered.     

Staining Mitochondria in Saccharomyces cerevisiae

After testing various procedures (amidoblack 10B, acid fuchsin-methyl blue, Luxol fast blue MBS-phloxine, toluidine blue O, Jams green B and pinacyanol), three stains can be recommended for staining both types of mitochondria (globose and threadlike) in the cells of Saccharomyces cerevisiae: (1) 0.1% solution of amidoblack 10B in citrate buffer (pH 3.0) for 10 min; (2) 0.01% solution of toluidine blue O in phosphate buffer (pH 6.0) for 30 min; (3) 0.01% solution of Janus green B in distilled water (pH 5.6) for 30 min. The latter stain is most specific because its staining reaction depends upon the action of the mitochondrial enzyme cytochrome c oxidase. Yet, low concentrations and short incubation periods must be applied to avoid poisoning of the cell metabolism.     

Methylene Violet (Bernthsen), by Zinc-Alkali-Chlorate Hydrolysis of Methylene Blue

Though Bernthsen's methylene violet (MV) is a common constituent of polychrome methylene blue, the hydrolytic oxydation of methylene blue to yield azure-free MV has been considered a difficult chemical reaction since the time of Bernthsen, who used Ag₂O in the hydrolysis. MV is qualitatively distinguished from azures by Bernthsen's criteria and the author's new tests: (1) light-excited isomeric change, (2) reactivity to acidity, (3) reaction with KCIO, and (4) reaction with Na₂SO₃ of azures in CHCI₃, while MV gives none. But MV shows (5) indicator properties at pH 4, while azures do not. For practical hydrolysis, treat methylene blue (10 parts by weight) and KCIO₃ (1 part) with 1-2 N NaOH to convert methylene blue to a mixture of MV and azures. Then dilute the solution, add a Zn salt and NaHCO₃ in excess of the amount needed to convert the NaOH to Na₂CO₃. Boil the solution gently for 1-2 hr. The end point of the reaction is found by pipetting a drop of reactant into 3% acetic acid in a test tube, adding CHC1₃ and extracting. The acetic layer should then be almost colorless while the CHC1₃ is colored intensely cherry red. After cooling, the precipitated dye is filtered and dried. This procedure gives good yields of a dye which meets the criteria given by Bernhsen. The peak of the absorption curve in solution, pH 4-11, is at 624 mμ (Bernthsen 625 mμ) and in acid solution, pH 0-4, 588 mμ (Biological Stains, 1953; 580 μ). The dye contains so little azures, that purification of the MV fraction obtained from the reaction mixture is unnecessary when it is used in the Wright-type Romanowsky stain. The remarkable staining effect of MV is its power to bring out red azurophil granules of monocytes and lymphocytes when used with eosinated thiazins in Wright's stain.     

Phloxine-Methylene Blue Staining of Formalin-Fixed Tissue

It is at present difficult to obtain a good phloxine-metbylene blue stain on formalin-fixed tissue. When phloxine has been used, it is washed out in the process of staining with methylene blue and differentiating with colophony (rosin). In the original technic of Mallory, Zenker's fixation is used. The tissue is first stained with a 2.5% aqueous solution of phloxine, then with a solution of 1% methylene blue plus 1% azure II and differentiated in colophony.¹     

Borax Methylene Blue: A Spectroscopic And Staining Study

Borax methylene blue is quite stable at room temperatures of 22-25 C. At 30 C polychroming is slow; during 50 days in a water bath at this temperature the absorption peak moves from 665 to 656 nm. At 35 C, the absorption peak reaches 660 nm in 7 days, 654 nm in 14. At 60 C polychroming is rapid, the absorption peak reaching 640-620 nm in 3 days. When the pH of the borax methylene blue solutions, normally about 9.0, is adjusted to pH 6.5, the absorption peak remains at 665 nm even when incubated at 60 C for extended periods.

When used as a blood stain 0.4 ml borax methylene blue (1% methylene blue in 1% borax), 4 ml acetone, 2 ml borax-acid phosphate buffer to bring the solution to pH 6.5, and distilled water to make 40 ml, with 0.2 ml 1% eosin added just before using, an excellent Nocht-Giemsa type stain is achieved after 30 minutes staining. The material plasmodia P. falciparum, P. vivax, and P. berghei stain moderate blue with dark red chromatin and green to black pigment granules.

The study confirms Malacnowski's 1891 results and explains Gautier's 1896-98 failure to duplicate it.     

The Demonstration of Beryllium Oxide in Paraffin Sections with Chromoxane Stains

Aqueous solutions of the arylmethane dyes Chromoxane pure blue BLD (C.I. No. 43825) and Chromoxane pure blue B (C.I. No. 43830) will stain beryllium oxide. In the presence of EDTA the staining of other metals is masked. As a specific stain for BeO, formol saline fixed paraffin sections are hydrated and stained for 1 hr with either 0.1 gm of pure blue BLD in 100 ml of pH 4.0 Na-acetate buffer or with 0.1 gm of pure blue B in 1 N NaOH adjusted to pH 9.0 with HCl. To mask interference from other metal ions, 9 gm of Na₂-EDTA is added to 100 ml of the stain solution. BeO is stained blue, organic tissue components are either unstained or pink. Results of tests against other materials show that a high degree of specificity may be expected from these dyes. A 1% aqueous solution of neutral red may be used as a counterstain.     

Identification of Haemoglobin by its Catalase Reaction with Peroxide and o-Dianisidine

o-Dianisidine (3,3'-dimethoxybenzidine) when used as an indicator in the peroxidase activity of haemoglobin forms a clear and distinct orange stain. The reaction takes from 5 to 15 rain in the presence of H₂O₂ and completes both fixation and staining. This may be followed by dehydration in dioxane, clearing in xylene and mounting in D.P.X. or Canada balsam. The detergent Tepol can be used to spread or to disintegrate the chick embryo to obtain a monolayer of cells after the staining reaction has been completed. Background staining is negligible, the reaction is very sensitive and the colour developed is permanent Stock solutions are: (1) o-dianisidine, 100 mg per 70 ml of ethanol; (2) acetate buffer, 0.1 M at pH 4.6; and (3) hydrogen peroxide, 30% aqueous solution. The stock solutions should be refrigerated. The staining mixture contains o-diarusidine solution, acetate buffer, distilled water and hydrogen peroxide in the proportion of 4:1:1.5:0.2.     

The effects of two physiological salines, Locke's and van Harreveld's, on the midgut red chromatophores of the freshwater shrimp, Caridina denticulata

It was reported previously that the red chromatophores on the midgut of a freshwater shrimp, Caridina denticulata, are affected by Locke's and van Harreveld's solutions differently, i.e., the pigment disperses in Locke's solution and concentrates with the addition of crude eyestalk extract, but in Harreveld's solution the chromatophores do not change in the saline alone nor do they respond to eyestalk extract. The differences were probably due to the osmotic pressure and Mg ion concentrations of the two solutions not being the same. Harreveld's solution is commonly used as a physiological saline for freshwater crustaceans such as crayfish. Consequently, this solution was employed at first in a previous study (Miyawaki and Tsuruda, 1985). But this solution completely inhibited pigment migration in the chromatophores. But when Locke's solution was subsequently tried, migration of the pigment in the midgut chromatophores occurred. It seemed worthwhile to examine further the effects of both solutions on these chromatophores. The results of this study are presented below.     

Use of Gallocyanin as a Myelin Stain for Brain and Spinal Cord

Tissue fixed in 10% formalin, formol saline, CaCO₃ or phosphate buffer neutralized formalin, Baker's formol calcium, Cajal's formol ammonium bromide, formalin-95% ethanol 1:9, formalin-methanol 1:9, Lillie's methanol-chloroform or Salthouse's formol cetyltrimethylammonium bromide was dehydrated and embedded in paraffin. Sections were attached to slides with either albumen or gelatine adhesive and processed throughout at room temperature of 22-25 C. Mordanting 30-60 min in 1% iron alum was followed by a 10 min wash in 4 changes of distilled water. Myelin was stained in a gallocyanin self-differentiating solution for 1-2.5 hr; thick sections requiring the longer time. The staining solution (pH approximately 7.4) consisted of Na₂CO₃, 90 mg; distilled water, 100 ml; gallocyanin, 250 mg; and ethanol, 5 ml. The ethanol was added to this mixture last, and after the other ingredients had been boiled and then cooled to room temperature. After a staining and thorough washing, Nissl granules were stained for 5-10 min in a solution consisting of: 0.1 M acetic acid, 60 ml; 0.1 M sodium acetate, 40 ml; methyl green, 500 mg. Washing, dehydration, clearing and mounting completed the process. Myelin sheaths were stained dark violet; neuronal nuclei, light green with dark granules of chromatin; nucleoli of motor cells and erythrocytes, dark violet; cytoplasm, green with dark green Nissl granules. The simple and reliable method can be adapted easily for use with automatic tissue processors.     

Cytochemical Staining of Sections from Plastic-Embedded Flagellates

Dinoflagellate chromosomes in sections of plastic-embedded cells were stained without removing the plastic. Azur B and Feulgen procedures were used to localise DNA. Azur B was used with Araldite or methacrylate sections by staining in 0.2% stain in 0.05 M citrate buffer at pH 4 for 1 hr at 50 C followed by rinsing in tertiary butyl alcohol to differentiate the chromosomes. Feulgen stain was used with Araldite sections by hydrolyzing in 1 N HCl at 60 C for 10 min, rinsing in water, staining for 24 hr, washing well, drying and covering. Fast green was used with methacrylate sections to stain proteins by flooding the slide with a 0.1% solution of stain in 0.06 M phosphate buffer at pH 8, allowing the stain to dry out at 40-50 C, washing well, drying and covering. Controls were carried out on material fixed in formalin and treated with nucleases or proteolytic enzymes prior to embedding, and staining.     

Metallic Lakes of the oxazines (Gallamin Blue, Gallocyanin and Coelestin Blue) as Nuclear Stain Substitutes for Hematoxylin

Becher's investigations upon the soluble metallic lakes of the oxazines have been re-investigated, extended and results described. Gallamin blue, gallocyanin and coelestin blue in combination with ferric ammonium sulfate gave the best results. The dyes are dissolved in a five per cent aqueous solution of ferric ammonium sulfate. The solution is boiled for 2-3 minutes, cooled, filtered and ready for immediate use. The iron lakes of these dyes stain nuclei excellently giving a deep blue or blue black in 3-5 minutes. No differentiation with acid is required. Coelestin blue gives the most stable solution and is recommended as a routine nuclear stain. The protoplasm remains practically colorless and counter-staining with acid dyes such as ethyl-eosin, orange G, or fuchsin gives pictures which cannot be distinguished from a good hematoxylin stain.

Counter-staining with van Gieson solution is also possible. Benda's modification of the van Gieson solution is recommended. Staining of fat with Sudan, scarlet red, etc., does not interfere with nuclear staining by these dyes.

As applied to the central nervous system these dyes are far superior to hematoxylin. Ganglion and glia cells are as excellently stained as with thionin.

The most widely used fixatives, namely formaldehyde, Mueller-formaldehyde, Zenker's and alcohol, give equally as good results. The nature of the staining process is briefly discussed and a prospectus offered.     

Observations on the Staining of Corynebacterium Diphtheriae

Albert's method, of staining diphtheria cultures consists of staining a fixed smear for one minute (some laboratories stain for five minutes) with a solution containing toluidine blue and malachite (or methyl) green, washing with water, and applying Albert's iodine for one minute. This procedure is discussed and criticized, and in addition the mechanism of the stain is elucidated. Also, the procedure which involves staining a fixed smear for one minute with Loeffler's alkaline methylene blue solution is discussed and criticized.

To overcome the objections to the above staining methods, a different method is proposed. This consists of staining a fixed smear with an acid solution of toluidine blue, washing with water, applying Albert's iodine for one minute, washing with water, and finally applying a safranin solution for 15-20 seconds. The theoretical basis for this method is presented.     

Modified Whipf's Polychrome: A Connective Tissue Stain with Special Application for Demonstrating Leishmania

A polychrome stain procedure was developed to demonstrate amastigotes of the protozoan parasite Leishmania braziliensis as well as cytoplasmic and other tissue components in cutaneous lesions of infected animals. The procedure is as follows: stain nuclei for 10 minutes with an iron hematoxylin containing 0.5% hematoxylin and 0.75% ferric ammonium sulfate dissolved in 1:1 0.6 N H₂SO₄:95% ethanol; rinse 4 minutes in distilled water. Cytoplasmic staining is achieved by exposing tissues for 10 minutes to a solution containing 0.25% Biebrich scarlet, 0.45% orange G, 0.5% phosphomolybdic acid and 0.5% phosphotungstic acid in 1% aqueous acetic acid. These first two solutions are modified from Whipf's polychrome stain. Sections are differentiated for 10 seconds in 50% ethanol, rinsed in water, stained 3 minutes in 0.1% aniline blue WS in saturated aqueous picric acid, rinsed in water and differentiated for 1 minute in absolute ethanol containing 0.05% acetic acid. Mordanting overnight in 6% picric acid in 95% ethanol produced optimal results.

This procedure was applied to sectioned material from experimental animals with various protozoa. Trypanosoma cruzi, Besnoitia Jellisoni, Toxoplasma gondii and especially Leishmania braziliensis were well demonstrated. Combining cytoplasmic dyes and phosphomolybdic-phosphotungstic acids into one solution afforded differential staining of tissues by Biebrich scarlet and orange G; connective tissues were stained by this solution. Substantially improved definition of connective tissues resulted after counterstaining. This procedure differs from the Massou sequence in which connective tissues are first stained by cytoplasmic dyes along with other tissues and then destained prior to specific counter-staining. in comparing dyes structurally related to Biebrich scarlet, it was found that Crocein scarlet MOO, but not Poncenu S, was an acceptable substitute. Sirius supra blue GL and Sirius red FSBA were not useful as replacements for aniline blue WS in this procedure.     

Detailed Differentiation of Bacteria by Means of A Mixture of Acid and Basic Dyes at Different pH-Values

As previously reported by the author (1927), a mixture of methylene blue and eosin Y can be used for the differential staining of bacteria. It gives a fairly deep staining of bacteria at about pH 3 and above. Below pH 3 the eosin Y stains bacteria only a very pale pink; at such high H-ion concentration, the eosin is present as undissociated color acid, and for this reason not enough eosin is in solution to stain bacteria. To improve the staining at such reactions, the eosin was replaced by a stronger acid dye, namely acid fuchsin. The mixture of methylene blue medicinal Merck and acid fuchsin can be successfully used at a pH-value as low as 0.8. The method of staining by this new mixture is entirely the same as with the old mixture. It is sensitive enough to detect the difference in the isoelectric points: (1) of the single bacteria from the same pure culture, (2) of different strains of the colon and typhoid organisms. Some strains of the colon organism were found by this method with an isoelectric point at a pH-value as low as that of the Staphylococcus. Others, on the contrary, have their isoelectric point as high in the pH-scale as that of the typhoid organism. The new mixture can also be used for the study of the chemical composition of the different parts of bacterial body. Applying it at a definite pH-value, the author was able to stain differentially polar bodies of the typhoid group and of the diphtheria organism. This new mixture can be recommended in staining of B. diphtheriae as a substitute for Neisser's stain. It is interesting to note that polar bodies of the colon group consist of more alkaline protein than the body of the bacteria itself, i. e., they are stained by acid fuchsin. The polar bodies of the B. diphtheriae on the contrary are composed of more acid protein than the bacterial body; i. e., they are stained by methylene blue. The impossibility of detecting the above mentioned variations in the isoelectric points of bacteria using the Gram method is explained by the absence of pH variations in the latter technic. The differentiation of bacteria by the Gram stain depends chiefly on the varying stability of the compound formed (Gram-positive or Gram-negative bacteria plus gentian violet and iodine) in the presence of organic solvents, such as alcohol, acetone, etc.