Identification and characterization of UndAHRCR-6, an outer membrane endecaheme c-type cytochrome of Shewanella sp. strain HRCR-6

UndA(HRCR-6) was identified from the metal-reducing bacterium Shewanella sp. strain HRCR-6. Both in vivo and in vitro characterization results indicate that UndA(HRCR-6) is an outer membrane endecaheme c-type cytochrome and probably has a key functional role in the extracellular reduction of iron [Fe(III)] oxides and uranium [U(VI)] by Shewanella sp. HRCR-6.     

Enhanced extraction of extracellular polymeric substances from biofilms by alternating current

The extraction of extracellular polymeric substances (EPS) including polysaccharides and proteins from aerobic biofilms using either EDTA or NaOH was enhanced by alternating current especially within the first 0.5 h of current application. At 60 mA and 50 Hz, the average extraction rate of polysaccharides within the first 0.5 h using EDTA was 8.3 mg h^–1 g TS^–1 (TS: total solid, dry wt), 1.6 times of that without current, and that of proteins was 2.5 mg h^–1 g TS^–1, 1.2 times higher. The extraction of polysaccharides was maximal at around 500 Hz while that of proteins was less affected by increasing the current frequency.     

Extraction of extracellular polymeric substances from extreme acidic microbial biofilms

The efficiency of five extraction methods for extracellular polymeric substances (EPS) was compared on three benthic eukaryotic biofilms isolated from an extreme acidic river, Río Tinto (SW, Spain). Three chemical methods (MilliQ water, NaCl, and ethylenediamine tetraacetic acid [EDTA]) and two physical methods (Dowex 50.8 and Crown Ether cation exchange resins) were tested. The quality and quantity of the EPS extracted from acidic biofilms varied according to which EPS extraction protocol was used. Higher amounts were obtained when NaCl and Crown Ether resins were used as extractant agents, followed by EDTA, Dowex, and MilliQ. EPS amounts varied from approximately 155 to 478 mg g⁻¹ of dry weight depending on the extraction method and biofilm analyzed. EPS were primarily composed of carbohydrate, heavy metals, and humic acid, plus small quantities of proteins and DNA. Neutral hexose concentrations corresponded to more than 90% of the total EPS dry weight. The proportions of each metals in the EPS extracted with EDTA are similar to the proportions present in the water from each locality where the biofilms were collected except for Al, Cu, Zn, and Pb. In this study, the extracellular matrix heavy metal sorption efficiencies of five methods for extracting EPS from eukaryotic acidic biofilms were compared.     

Protection of cells from salinity stress by extracellular polymeric substances in diatom biofilms

Diatom biofilms are abundant in the marine environment. It is assumed (but untested) that extracellular polymeric substances (EPS), produced by diatoms, enable cells to cope with fluctuating salinity. To determine the protective role of EPS, Cylindrotheca closterium was grown in xanthan gum at salinities of 35, 50, 70 and 90 ppt. A xanthan matrix significantly increased cell viability (determined by SYTOX-Green), growth rate and population density by up to 300, 2,300 and 200%, respectively. Diatoms grown in 0.75% w/v xanthan, subjected to acute salinity shock treatments (at salinities 17.5, 50, 70 and 90 ppt) maintained photosynthetic capacity, F_q′/F_m′, within 4% of pre-shock values, whereas F_q′/F_m′ in cells grown without xanthan declined by up to 64% with hypersaline shock. Biofilms that developed in xanthan at standard salinity helped cells to maintain function during salinity shock. These results provide evidence of the benefits of living in an EPS matrix for biofilm diatoms.     

Optimization of production of C-phycocyanin and extracellular polymeric substances by Arthrospira sp.

The key factors influencing the production of C-phycocyanin (C-PC) and extracellular polymeric substances (EPS) by photoautotrophic culture of Arthrospira sp. were optimized using Taguchi method. Six factors were varied at either three or two levels as follows: light intensity at three levels; three initial culture pHs; two species of Arthrospira; three concentrations of Zarrouk’s medium; three rates of aeration of the culture with air mixed with 2% v/v carbon dioxide; and two incubation temperatures. All cultures ran for 14 days. The optimal conditions for the production of C-PC and EPS were different. For both products, the best cyanobacterium proved to be Arthrospira maxima IFRPD1183. The production of C-PC was maximized with the following conditions: a light intensity of 68 µmol photons m⁻² s⁻¹ (a diurnal cycle of 16-h photoperiod and 8-h dark period), an initial pH of 10, the full strength (100%) Zarrouk’s culture medium, an aeration rate of 0.6 vvm (air mixed with 2% v/v CO₂) and a culture temperature of 30 °C. The concentration of Zarrouk’s medium was the most important factor influencing the final concentration of C-PC. The optimal conditions for maximal production of EPS were as follows: a light intensity of 203 µmol photons m⁻² s⁻¹ with the earlier specified light–dark cycle; an initial pH of 9.5; a 50% strength of Zarrouk’s medium; an aeration rate of 0.2 vvm (air mixed with 2% v/v CO₂); and a temperature of 35 °C. Production of C-PC and EPS in raceway ponds is discussed.

     

Quantification of extracellular polymeric substances in biofilms by confocal laser scanning microscopy

Extracellular polymeric substances (EPS) in a biofilm were quantified by measuring the total cell volume from a 3-D image of the biofilm using confocal laser scanning microscope after staining cells with a fluorescent dye specific for nucleic acids. The EPS content was the difference between the volatile solids in the biofilm and the total cell mass, which could be quantified from the measured cell volume.     

Control of formation and cellular detachment from Shewanella oneidensis MR-1 biofilms by cyclic di-GMP

Stability and resilience against environmental perturbations are critical properties of medical and environmental biofilms and pose important targets for their control. Biofilm stability is determined by two mutually exclusive processes: attachment of cells to and detachment from the biofilm matrix. Using Shewanella oneidensis MR-1, an environmentally versatile, Fe(III) and Mn(IV) mineral-reducing microorganism, we identified mxdABCD as a new set of genes essential for formation of a three-dimensional biofilm. Molecular analysis revealed that mxdA encodes a cyclic bis(3',5')guanylic acid (cyclic di-GMP)-forming enzyme with an unusual GGDEF motif, i.e., NVDEF, which is essential for its function. mxdB encodes a putative membrane-associated glycosyl transferase. Both genes are essential for matrix attachment. The attachment-deficient phenotype of a DeltamxdA mutant was rescued by ectopic expression of VCA0956, encoding another diguanylate cyclase. Interestingly, a rapid cellular detachment from the biofilm occurred upon induction of yhjH, a gene encoding an enzyme that has been shown to have phosphodiesterase activity. In this way, it was possible to bypass the previously identified sudden depletion of molecular oxygen as an environmental trigger to induce biofilm dissolution. We propose a model for c-di-GMP as a key intracellular regulator for controlling biofilm stability by shifting the state of a biofilm cell between attachment and detachment in a concentration-dependent manner.     

Microbial production and characterization of superparamagnetic magnetite nanoparticles by Shewanella sp. HN-41

A facultative dissimilatory metal-reducing bacterium, Shewanella sp. strain HN-41, was used to produce magnetite nanoparticles from a precursor, poorly crystalline ironoxyhydroxide akaganeite (beta-FeOOH), by reducing Fe(III). The diameter of the biogenic magnetite nanoparticles ranged from 26 nm to 38 nm, characterized by dynamic light scattering spectrophotometry. The magnetite nanoparticles consisted of mostly uniformly shaped spheres, which were identified by electron microscopy. The magnetometry revealed the superparamagnetic property of the magnetic nanoparticles. The atomic structure of the biogenic magnetite, which was determined by extended X-ray absorption fine structure spectroscopic analysis, showed similar atomic structural parameters, such as atomic distances and coordinations, to typical magnetite mineral.     

Stress response mechanisms and description of three novel species Shewanella avicenniae sp. nov., Shewanella sedimentimangrovi sp. nov. and Shewanella yunxiaonensis sp. nov., isolated from mangrove ecosystem

Antonie van Leeuwenhoek - Three Gram-staining negative, facultatively anaerobic, rod-shaped and motile strains, FJAT-51800T, FJAT-52962T and FJAT-54481T were isolated from the sediment samples of...     

Lipid microdomain formation: characterization by infrared spectroscopy and ultrasonic velocimetry

We demonstrate the use of vibrational infrared spectroscopy applied to characterize lipid microdomain sizes derived from a model raft-like system consisting of nonhydroxy galactocerebroside, cholesterol, and dipalmitoylphosphatidylcholine components. The resulting spectroscopic correlation field components of the lipid acyl chain CH₂ methylene deformation modes, observed when lipid multilamellar assemblies are rapidly frozen from the liquid crystalline state to the gel phase, indicate the existence of lipid microdomains on a scale of several nanometers. The addition of cholesterol disrupts the glycosphingolipid selectively but perturbs the di-saturated chain phospholipid matrix. Complementary acoustic velocimetry measurements indicate that the microdomain formation decreases the total volume adiabatic compressibilities of the multilamellar vesicle assemblies. The addition of cholesterol, however, disrupts the galactocerebroside domains, resulting in a slight increase in the lipid assemblies’ total adiabatic compressibility. The combination of these two physical approaches offers new insight into microdomain formation and their properties in model bilayer systems.     

Identification and characterization of N-acylhomoserine lactone-acylase from the fish intestinal Shewanella sp. strain MIB015

N-Acylhomoserine lactones (AHLs) are used as quorum-sensing signal molecules by many gram-negative bacteria. We have reported that Shewanella sp. strain MIB015 degrades AHLs. In the present study, we cloned the aac gene from MIB015 by PCR with specific primers based on the aac gene in Shewanella oneidensis strain MR-1, which showed high homology with the known AHL-acylases. Escherichia coli expressing Aac showed high degrading activity of AHLs with long acyl chains. HPLC analysis revealed that Aac worked as AHL-acylase, which hydrolyzed the amide bond of AHL. In addition, expression of Aac in fish pathogen Vibrio anguillarum markedly reduced AHL production and biofilm formation. In conclusion, this study indicates that Aac might be effective in quenching quorum sensing of fish pathogens.     

Global detection and characterization of hypothetical proteins in Shewanella oneidensis MR-1 using LC-MS based proteomics

The availability of whole genome sequences has enabled the application of powerful tools for assaying global expression patterns in environmentally relevant bacteria such as Shewanella oneidensis MR-1. A large number of genes in prokaryote genomes, including MR-1, have been annotated as hypothetical, indicating that no similar protein has yet been identified in other organisms. Using high-sensitivity MS coupled with accurate mass and time (AMT) tag methodology, 1078 tryptic peptides were collectively detected in MR-1 cultures, 671 of which were unique to their parent protein. Using only these unique tryptic peptides and a minimum of two peptides per protein, we identified, with high confidence, the expression of 258 hypothetical proteins. These proteins ranged from 3.5 to 139 kDa, with 47 being 100 amino acid residues or less. Using a combination of information including detection in cells grown under specific culture conditions, presence within a specific cell fraction, and predictive algorithms such as PSORT and PSORT-B, possible/plausible functions are proposed for some hypothetical proteins. Further, by applying this approach a number of proteins were found not only to be expressed, but only expressed under certain culturing conditions, thereby suggesting function while at the same time isolating several proteins to distinct locales of the cell. These results demonstrate the utility of the AMT tag methodology for comprehensive profiling of the microbial proteome while confirming the expression of a large number of hypothetical genes.     

Characterization of glycoconjugates of extracellular polymeric substances in tufa-associated biofilms by using fluorescence lectin-binding analysis

Freshwater tufa deposits are the result of calcification associated with biofilms dominated by cyanobacteria. Recent investigations highlighted the fact that the formation of microbial calcium carbonates is mainly dependent on the saturation index, which is determined by pH, the ion activity of Ca(2+) and CO(3)(2-), and the occurrence of extracellular polymeric substances (EPS) produced by microorganisms. EPS, which contain carboxyl and/or hydroxyl groups, can strongly bind cations. This may result in inhibition of CaCO(3) precipitation. In contrast, the formation of templates for crystal nucleation was reported by many previous investigations. The purposes of this study were (i) to characterize the in situ distribution of EPS glycoconjugates in tufa-associated biofilms of two German hard-water creeks by employing fluorescence lectin-binding analysis (FLBA), (ii) to verify the specific lectin-binding pattern by competitive-inhibition assays, and (iii) to assess whether carbonates are associated with structural EPS domains. Three major in situ EPS domains (cyanobacterial, network-like, and cloud-like structures) were detected by FLBA in combination with laser scanning microscopy (LSM). Based on lectin specificity, the EPS glycoconjugates produced by cyanobacteria contained mainly fucose, amino sugars (N-acetyl-glucosamine and N-acetyl-galactosamine), and sialic acid. Tufa deposits were irregularly covered by network-like EPS structures, which may originate from cyanobacterial EPS secretions. Cloud-like EPS glycoconjugates were dominated by sialic acid, amino sugars, and galactose. In some cases calcium carbonate crystals were associated with cyanobacterial EPS glycoconjugates. The detection of amino sugars and calcium carbonate in close association with decaying sheath material indicated that microbially mediated processes might be important for calcium carbonate precipitation in freshwater tufa systems.     

Acid-precipitable polymeric lignin from hardwood lignocellulose: production by a Streptomyces sp.

A Streptomyces sp. isolate, from decayed wood shavings, solubilized lignocellulose (LC) and lignin of Pinus radiata, producing about 50 mg acid-precipitable polymeric lignin per g LC. The product was poor in protein and carbohydrates and contained mainly vanillin, guaicol, vanillic and ferulic acids. Hardwood LC is thus suitable for producing APPL as a phenolic chemical feedstock.V.M. Kaluskar is with the Department of Microbiology, J and J Science College, Nadiad 387001, Gujarat, India. B.P. Kapadanis is with the Department of Microbiology, School of Sciences, University of Pune, Ganesh Khind, Pune-41107, Maharashtra, India. M.J. Penninckx is with the Unit of Microbial Physiology and Ecology, Free University of Brussels, c/o IPB 642, rue Engeland, B-1180, Brussels, Belgium     

Crystal structure of N-domain of FKBP22 from Shewanella sp. SIB1: dimer dissociation by disruption of Val-Leu knot

FK506‐binding protein 22 (FKBP22) from the psychrotophic bacterium Shewanella sp. SIB1 (SIB1 FKBP22) is a homodimeric protein with peptidyl prolyl cis‐trans isomerase (PPIase) activity. Each monomer consists of the N‐terminal domain responsible for dimerization and C‐terminal catalytic domain. To reveal interactions at the dimer interface of SIB1 FKBP22, the crystal structure of the N‐domain of SIB1 FKBP22 (SN‐FKBP22, residues 1‐68) was determined at 1.9 Å resolution. SN‐FKBP22 forms a dimer, in which each monomer consists of three helices (α1, α2, and α3N). In the dimer, two monomers have head‐to‐head interactions, in which residues 8–64 of one monomer form tight interface with the corresponding residues of the other. The interface is featured by the presence of a Val‐Leu knot, in which Val37 and Leu41 of one monomer interact with Val41 and Leu37 of the other, respectively. To examine whether SIB1 FKBP22 is dissociated into the monomers by disruption of this knot, the mutant protein V37R/L41R‐FKBP22, in which Val37 and Leu41 of SIB1 FKBP22 are simultaneously replaced by Arg, was constructed and biochemically characterized. This mutant protein was indistinguishable from the SIB1 FKBP22 derivative lacking the N‐domain in oligomeric state, far‐UV CD spectrum, thermal denaturation curve, PPIase activity, and binding ability to a folding intermediate of protein, suggesting that the N‐domain of V37R/L41R‐FKBP22 is disordered. We propose that a Val‐Leu knot at the dimer interface of SIB1 FKBP22 is important for dimerization and dimerization is required for folding of the N‐domain.     

Isolation and characterization of biofilm-forming bacteria and associated extracellular polymeric substances from oral cavity

The current work deals with the studies on characterization of two biofilm-forming bacteria isolated from the oral cavity. The major constituent of biofilm other than bacterial cells is the extracellular polymeric substance (EPS) matrix, which is secreted by the bacterial cells themselves. Physical properties of biofilms such as attachment, mechanical strength, antibiotic resistance can be attributed to EPS matrix. Molecular phylogeny confirmed these two isolates as Pseudomonas aeruginosa and Bacillus subtilis. It was observed that cell attachment in both the strains was maximal when xylose was used as the sole carbon source. The EPS characterization result indicated the presence of a macromolecular complex constituting of carbohydrate, protein, lipids and nucleic acids. Test for biofilm formation in the presence of metal salts of iron and zinc showed moderate to high inhibition of biofilm formation. However, calcium, iron and copper have been found to enhance biofilm growth significantly. There was more than 50 % increase in biofilm growth by P. aeruginosa with an increase in calcium concentration up to 80 ppm (Two tailed t-test P?<?0.05), whereas ≥ 15 % increase in biofilm growth by B. subtilis was observed in the presence of 80 ppm of calcium. However, variations were significant (Two way ANOVA, P?<?0.01) between different metals in different concentrations. In this study, attempts have been made to examine the effect of different carbon sources and physiological conditions on biofilm growth.     

Purification and Properties of an Extracellular Agarase from Alteromonas sp. Strain C-1

A marine bacterial strain isolated from the Bay of San Vicente, Chile, was identified as Alteromonas sp. strain C-1. In the presence of agar, this strain produced high levels of an extracellular agarase. The production of agarase was repressed by glucose, with a parallel decrease in bacterial growth. The enzyme was purified to homogeneity by anion-exchange chromatography and gel filtration, with an overall yield of 45%. The enzyme has a molecular weight of 52,000, is salt sensitive, and hydrolyzes agar, yielding neoagarotetraose as the main product, with an optimum pH of about 6.5.