Sulfonated amphipols: synthesis, properties, and applications

Amphipols (APols) are amphiphatic polymers that keep membrane proteins (MPs) water-soluble. The best characterized and most widely used APol to date, A8-35, comprises a polyacrylate backbone grafted with octyl- and isopropylamine side chains. The nature of its hydrophilic moieties prevents its use at the slightly acidic pH that is desirable to slow down the rate of amide proton exchange in solution NMR studies. We describe here the synthesis and properties of pH-insensitive APols obtained by replacing isopropyles with taurine. Sulfonated APols (SAPols) can be used to trap MPs in the form of small complexes, to stabilize them, and to keep them water-soluble even at low pH. [(15) N,(1) H]-transverse relaxation-optimized spectroscopy NMR spectra obtained at pH 6.8 of a bacterial outer MP folded in SAPols show that the protein is correctly folded. The spectra have a resolution similar to that achieved with A8-35 and reveal water-exposed amide and indole protons whose resonance peaks are absent at pH 8.0.     

High-Resolution Structure of a Membrane Protein Transferred from Amphipol to a Lipidic Mesophase

Amphipols (APols) have become important tools for the stabilization, folding, and in vitro structural and functional studies of membrane proteins (MPs). Direct crystallization of MPs solubilized in APols would be of high importance for structural biology. However, despite considerable efforts, it is still not clear whether MP/APol complexes can form well-ordered crystals suitable for X-ray crystallography. In the present work, we show that an APol-trapped MP can be crystallized in meso. Bacteriorhodopsin (BR) trapped by APol A8-35 was mixed with a lipidic mesophase, and crystallization was induced by adding a precipitant. The crystals diffract beyond 2 Å. The structure of BR was solved to 2 Å and found to be indistinguishable from previous structures obtained after transfer from detergent solutions. We suggest the proposed protocol of in meso crystallization to be generally applicable to APol-trapped MPs.     

Molecular Dynamics Simulations of a Membrane Protein/Amphipol Complex

Amphipathic polymers known as “amphipols” provide a highly stabilizing environment for handling membrane proteins in aqueous solutions. A8-35, an amphipol with a polyacrylate backbone and hydrophobic grafts, has been extensively characterized and widely employed for structural and functional studies of membrane proteins using biochemical and biophysical approaches. Given the sensitivity of membrane proteins to their environment, it is important to examine what effects amphipols may have on the structure and dynamics of the proteins they complex. Here we present the first molecular dynamics study of an amphipol-stabilized membrane protein, using Escherichia coli OmpX as a model. We begin by describing the structure of the complexes formed by supplementing OmpX with increasing amounts of A8-35, in order to determine how the amphipol interacts with the transmembrane and extramembrane surfaces of the protein. We then compare the dynamics of the protein in either A8-35, a detergent, or a lipid bilayer. We find that protein dynamics on all accessible length scales is restrained by A8-35, which provides a basis to understanding some of the stabilizing and functional effects of amphipols that have been experimentally observed.     

How Amphipols Embed Membrane Proteins: Global Solvent Accessibility and Interaction with a Flexible Protein Terminus

Amphipathic polymers called amphipols provide a valuable alternative to detergents for keeping integral membrane proteins soluble in aqueous buffers. Here, we characterize spatial contacts of amphipol A8-35 with membrane proteins from two architectural classes: The 8-stranded β-barrel outer membrane protein OmpX and the α-helical protein bacteriorhodopsin. OmpX is well structured in A8-35, with its barrel adopting a fold closely similar to that in dihexanoylphosphocholine micelles. The accessibility of A8-35-trapped OmpX by a water-soluble paramagnetic molecule is highly similar to that in detergent micelles and resembles the accessibility in the natural membrane. For the α-helical protein bacteriorhodopsin, previously shown to keep its fold and function in amphipols, NMR data show that the imidazole protons of a polyhistidine tag at the N-terminus of the protein are exchange protected in the presence of detergent and lipid bilayer nanodiscs, but not in amphipols, indicating the absence of an interaction in the latter case. Overall, A8-35 exhibits protein interaction properties somewhat different from detergents and lipid bilayer nanodiscs, while maintaining the structure of solubilized integral membrane proteins.     

Dynamics of membrane protein/amphipol association studied by Förster resonance energy transfer: implications for in vitro studies of amphipol-stabilized membrane proteins

Amphipols (APols) are short amphipathic polymers that can substitute for detergents to keep membrane proteins (MPs) water-soluble while stabilizing them biochemically. We have examined the factors that determine the size and dispersity of MP/APol complexes and studied the dynamics of the association, taking as a model system the transmembrane domain of Escherichia coli outer membrane protein A (tOmpA) trapped by A8-35, a polyacrylate-based APol. Molecular sieving indicates that the solution properties of the APol largely determine those of tOmpA/APol complexes. Achieving monodispersity depends on using amphipols that themselves form monodisperse particles, on working in neutral or basic solutions, and on the presence of free APols. In order to investigate the role of the latter, a fluorescently labeled version of A8-35 has been synthesized. F?rster resonance energy transfer measurements show that extensive dilution of tOmpA/A8-35 particles into an APol-free medium does not entail any detectable desorption of A8-35, even after extended periods of time (hours-days). The fluorescent APol, on the other hand, readily exchanges for other surfactants, be they detergent or unlabeled APol. These findings are discussed in the contexts of sample optimization for MP solution studies and of APol-mediated MP functionalization.     

Amphipol-assisted folding of bacteriorhodopsin in the presence or absence of lipids: functional consequences

Amphipols are short amphipathic polymers designed to stabilize membrane proteins in aqueous solutions in the absence of detergent. Bacteriorhodopsin (BR), a light-driven proton pump, has been denatured, either by direct solubilization of the purple membrane in sodium dodecylsulfate (SDS) solution or by a procedure that involves delipidation with organic solvent followed by transfer to SDS, and renatured in amphipol A8-35. The effect of different renaturation procedures and of the presence or absence of lipids and the cofactor retinal have been investigated. The resulting samples have been characterized by absorbance spectroscopy, size-exclusion chromatography, thermostability measurements, and determination of photocycle kinetics. Transfer to A8-35 can be achieved by SDS precipitation, dilution, or dialysis, the first route resulting in the highest yield of refolding. Functional BR can be refolded whether in the presence or absence of lipids, higher yields being achieved in their presence. Retinal is not required for the protein to refold, but it stabilizes the refolded form and, thereby, improves folding yields. Lipids are not required for BR to perform its complete photocycle, but their presence speeds up the return to the ground state. Taken together, these data indicate that a membrane or membrane-mimetic environment is not required for correct decoding of the chemical information contained in the sequence of BR; functional folding is possible even in the highly foreign environment of lipid-free amphipols. BR interactions with lipids, however, contribute to an effective photocycle.     

Labeling and Functionalizing Amphipols for Biological Applications

Amphipols (APols) are short amphipathic polymers developed as an alternative to detergents for handling membrane proteins (MPs) in aqueous solution. MPs are, as a rule, much more stable following trapping with APols than they are in detergent solutions. The best-characterized APol to date, called A8-35, is a mixture of short-chain sodium polyacrylates randomly derivatized with octylamine and isopropylamine. Its solution properties have been studied in detail, and it has been used extensively for biochemical and biophysical studies of MPs. One of the attractive characteristics of APols is that it is relatively easy to label them, isotopically or otherwise, without affecting their physical-chemical properties. Furthermore, several variously modified APols can be mixed, achieving multiple functionalization of MP/APol complexes in the easiest possible manner. Labeled or tagged APols are being used to study the solution properties of APols, their miscibility, their biodistribution upon injection into living organisms, their association with MPs and the composition, structure and dynamics of MP/APol complexes, examining the exchange of surfactants at the surface of MPs, labeling MPs to follow their distribution in fractionation experiments or to immobilize them, increasing the contrast between APols and solvent or MPs in biophysical experiments, improving NMR spectra, etc. Labeling or functionalization of APols can take various courses, each of which has its specific constraints and advantages regarding both synthesis and purification. The present review offers an overview of the various derivatives of A8-35 and its congeners that have been developed in our laboratory and discusses the pros and cons of various synthetic routes.     

Complexation of integral membrane proteins by phosphorylcholine-based amphipols

Amphiphilic macromolecules, known as amphipols, have emerged as promising candidates to replace conventional detergents for handling integral membrane proteins in water due to the enhanced stability of protein/amphipol complexes as compared to protein/detergent complexes. The limited portfolio of amphipols currently available prompted us to develop amphipols bearing phosphorylcholine-based units (PC). Unlike carboxylated polymers, PC-amphipols remain soluble in aqueous media under conditions of low pH, high salt concentration, or in the presence of divalent ions. The solubilizing properties of four PC-amphipols were assessed in the case of two membrane proteins, cytochrome b(6)f and bacteriorhodopsin. The protein/PC-amphipol complexes had a low dispersity in size, as determined by rate zonal ultracentrifugation. Short PC-amphipols ( approximately 22 kDa) of low dispersity in length, containing approximately 30 mol% octyl side groups, approximately 35 mol% PC-groups, and approximately 35 mol% isopropyl side groups, appeared best suited to form stable complexes, preserving the native state of BR over periods of several days. BR/PC-amphipol complexes remained soluble in aqueous media at pH> or =5, as well as in the presence of 1 M NaCl or 12 mM calcium ions. Results from isothermal titration calorimetry indicated that the energetics of the conversion of BR/detergent complexes into BR/amphipol complexes are similar for PC-amphipols and carboxylated amphiphols.     

Amphipol-Mediated Screening of Molecular Orthoses Specific for Membrane Protein Targets

Specific, tight-binding protein partners are valuable helpers to facilitate membrane protein (MP) crystallization, because they can i) stabilize the protein, ii) reduce its conformational heterogeneity, and iii) increase the polar surface from which well-ordered crystals can grow. The design and production of a new family of synthetic scaffolds (dubbed αReps, for “artificial alpha repeat protein”) have been recently described. The stabilization and immobilization of MPs in a functional state are an absolute prerequisite for the screening of binders that recognize specifically their native conformation. We present here a general procedure for the selection of αReps specific of any MP. It relies on the use of biotinylated amphipols, which act as a universal “Velcro” to stabilize, and immobilize MP targets onto streptavidin-coated solid supports, thus doing away with the need to tag the protein itself.     

Protective and inhibitory effects of various types of amphipols on the Ca2+-ATPase from sarcoplasmic reticulum: a comparative study

Amphipols are amphipathic polymers designed to replace or supplement detergents in membrane protein solution studies. Previous work has suggested both advantages and disadvantages to the use of a polyacrylate-based amphipol, A8-35, for studying the sarcoplasmic reticulum Ca2+-ATPase (SERCA1a). We investigated this issue further using a set of four amphipols with different chemical structures. Previous size exclusion chromatography experiments had shown that A8-35 and SERCA1a/A8-35 complexes aggregate under certain conditions. We show here that aggregation can be prevented by omitting calcium from buffers or by using a sulfonated version of A8-35. A8-35 had previously been shown to protect Ca2+-ATPase from irreversible denaturation, while inhibiting its activity in a reversible manner. We show here that the other three amphipols tested also display these properties and that all four amphipols slow down backward calcium dissociation from the nonphosphorylated solubilized enzyme, a priori an unrelated step. As this calcium dissociation involves the opening up of the bundle of transmembrane ATPase segments, the slowing of this process may indicate that multipoint attachment of the polymers to the hydrophobic transmembrane surface damps protein dynamics ("Gulliver" effect). Damping might be the reason why amphipols also simultaneously protect membrane proteins against irreversible denaturation and may inhibit the activity of those of them that display large rearrangements of their transmembrane surface during their catalytic cycle.     

Complexation of integral membrane proteins by phosphorylcholine-based amphipols

Amphiphilic macromolecules, known as amphipols, have emerged as promising candidates to replace conventional detergents for handling integral membrane proteins in water due to the enhanced stability of protein/amphipol complexes as compared to protein/detergent complexes. The limited portfolio of amphipols currently available prompted us to develop amphipols bearing phosphorylcholine-based units (PC). Unlike carboxylated polymers, PC-amphipols remain soluble in aqueous media under conditions of low pH, high salt concentration, or in the presence of divalent ions. The solubilizing properties of four PC-amphipols were assessed in the case of two membrane proteins, cytochrome b₆f and bacteriorhodopsin. The protein/PC-amphipol complexes had a low dispersity in size, as determined by rate zonal ultracentrifugation. Short PC-amphipols (<M>≈ 22 kDa) of low dispersity in length, containing ∼ 30 mol% octyl side groups, ∼ 35 mol% PC-groups, and ∼ 35 mol% isopropyl side groups, appeared best suited to form stable complexes, preserving the native state of BR over periods of several days. BR/PC-amphipol complexes remained soluble in aqueous media at pH ≥ 5, as well as in the presence of 1 M NaCl or 12 mM calcium ions. Results from isothermal titration calorimetry indicated that the energetics of the conversion of BR/detergent complexes into BR/amphipol complexes are similar for PC-amphipols and carboxylated amphiphols.     

Intermediates in the refolding of ribonuclease at subzero temperatures. 1. Monitoring by nitrotyrosine absorbance

Derivatives of ribonuclease A in which tyrosines-73, -76, and -115 were nitrated have been synthesized, purified to homogeneity, and characterized by NMR, isoelectric points, absorbance spectra, and catalytic activity. The positions of their reversible thermal unfolding transitions were determined in 35% methanol at pH* 3.0 and 6.0. In the present study the kinetics of the refolding of these nitrotyrosine derivatives were measured at -15 degrees C at pH* 3.0 and 6.0 by using a cryosolvent composed of 35% aqueous methanol. The rates of folding of different regions of the molecule were determined by using the nitrotyrosines as environmentally sensitive probes. Multiphasic kinetics were observed for the refolding of the nitro-Tyr-115, -73, and -76 derivatives. The native environment about Tyr-115 was formed more rapidly than that about Tyr-73 and -76, and the native environment about both these tyrosines was attained much sooner than the native state itself, as judged by other probes. The results indicate that different regions of the molecule attain their native environments at different rates. This observation shows that the folding pathway must involve partially folded intermediate states.     

Bacteriorhodopsin/amphipol complexes: structural and functional properties

The membrane protein bacteriorhodopsin (BR) can be kept soluble in its native state for months in the absence of detergent by amphipol (APol) A8-35, an amphiphilic polymer. After an actinic flash, A8-35-complexed BR undergoes a complete photocycle, with kinetics intermediate between that in detergent solution and that in its native membrane. BR/APol complexes form well defined, globular particles comprising a monomer of BR, a complete set of purple membrane lipids, and, in a peripheral distribution, ∼2 g APol/g BR, arranged in a compact layer. In the absence of free APol, BR/APol particles can autoassociate into small or large ordered fibrils.     

Nanoparticle Surface-Enhanced Raman Scattering of Bacteriorhodopsin Stabilized by Amphipol A8-35

Surface-enhanced Raman spectroscopy (SERS) has developed dramatically since its discovery in the 1970s, because of its power as an analytical tool for selective sensing of molecules adsorbed onto noble metal nanoparticles (NPs) and nanostructures, including at the single-molecule (SM) level. Despite the high importance of membrane proteins (MPs), SERS application to MPs has not really been studied, due to the great handling difficulties resulting from the amphiphilic nature of MPs. The ability of amphipols (APols) to trap MPs and keep them soluble, stable, and functional opens up onto highly interesting applications for SERS studies, possibly at the SM level. This seems to be feasible since single APol-trapped MPs can fit into gaps between noble metal NPs, or in other gap-containing SERS substrates, whereby the enhancement of Raman scattering signal may be sufficient for SM sensitivity. The goal of the present study is to give a proof of concept of SERS with APol-stabilized MPs, using bacteriorhodopsin (BR) as a model. BR trapped by APol A8-35 remains functional even after partial drying at a low humidity. A dried mixture of silver Lee–Meisel colloid NPs and BR/A8-35 complexes give rise to SERS with an average enhancement factor in excess of 10². SERS spectra resemble non-SERS spectra of a dried sample of BR/APol complexes.     

Amphipathic polymers: tools to fold integral membrane proteins to their active form

Among the major obstacles to pharmacological and structural studies of integral membrane proteins (MPs) are their natural scarcity and the difficulty in overproducing them in their native form. MPs can be overexpressed in the non-native state as inclusion bodies, but inducing them to achieve their functional three-dimensional structure has proven to be a major challenge. We describe here the use of an amphipathic polymer, amphipol A8-35, as a novel environment that allows both beta-barrel and alpha-helical MPs to fold to their native state, in the absence of detergents or lipids. Amphipols, which are extremely mild surfactants, appear to favor the formation of native intramolecular protein-protein interactions over intermolecular or protein-surfactant ones. The feasibility of the approach is demonstrated using as models OmpA and FomA, two outer membrane proteins from the eubacteria Escherichia coli and Fusobacterium nucleatum, respectively, and bacteriorhodopsin, a light-driven proton pump from the plasma membrane of the archaebacterium Halobacterium salinarium.     

Synthesis,Characterization and Applications of a Perdeuterated Amphipol

Amphipols are short amphipathic polymers that can substitute for detergents at the hydrophobic surface of membrane proteins (MPs), keeping them soluble in the absence of detergents while stabilizing them. The most widely used amphipol, known as A8-35, is comprised of a polyacrylic acid (PAA) main chain grafted with octylamine and isopropylamine. Among its many applications, A8-35 has proven particularly useful for solution-state NMR studies of MPs, for which it can be desirable to eliminate signals originating from the protons of the surfactant. In the present work, we describe the synthesis and properties of perdeuterated A8-35 (perDAPol). Perdeuterated PAA was obtained by radical polymerization of deuterated acrylic acid. It was subsequently grafted with deuterated amines, yielding perDAPol. The number-average molar mass of hydrogenated and perDAPol, ~4 and ~5 kDa, respectively, was deduced from that of their PAA precursors, determined by size exclusion chromatography in tetrahydrofuran following permethylation. Electrospray ionization–ion mobility spectrometry–mass spectrometry measurements show the molar mass and distribution of the two APols to be very similar. Upon neutron scattering, the contrast match point of perDAPol is found to be ~120 % D₂O. In ¹H-¹H nuclear overhauser effect NMR spectra, its contribution is reduced to ~6 % of that of hydrogenated A8-35, making it suitable for extended uses in NMR spectroscopy. PerDAPol ought to also be of use for inelastic neutron scattering studies of the dynamics of APol-trapped MPs, as well as small-angle neutron scattering and analytical ultracentrifugation.     

Amphipols for Each Season

Amphipols (APols) are short amphipathic polymers that can substitute for detergents at the transmembrane surface of membrane proteins (MPs) and, thereby, keep them soluble in detergent free aqueous solutions. APol-trapped MPs are, as a rule, more stable biochemically than their detergent-solubilized counterparts. APols have proven useful to produce MPs, most noticeably by assisting their folding from the denatured state obtained after solubilizing MP inclusion bodies in either SDS or urea. They facilitate the handling in aqueous solution of fragile MPs for the purpose of proteomics, structural and functional studies, and therapeutics. Because APols can be chemically labeled or functionalized, and they form very stable complexes with MPs, they can also be used to functionalize those indirectly, which opens onto many novel applications. Following a brief recall of the properties of APols and MP/APol complexes, an update is provided of recent progress in these various fields.     

DNA synthesis and content in the macrophage nuclei of normal mice, during carcinogenesis and during the administration of retinoids to the animals

It has been found that nearly 50% of the lymph node and spleen macrophages (MP) of the CBA line mice contain DNA at levels superior to the diploid value (H2c--H4c in mononuclear MP, and up to H16c among polynuclear ones, the latter comprising 2.5-9.0% of the whole MP population). No DNA synthesis and mitosis were detected by autoradiography, cytophotometry, and cytomorphological analysis. During carcinogenesis the proportion of MP with elevated DNA amounts ("activated MPs") decreases due to their migration to tumours. Also immature MPs (1.6%) appear in the population, which synthesize DNA, but do not divide. Injection of retinoids restores the percentage of MPs with elevated DNA amounts to the levels characteristic of the intact animals, the fraction of DNA-synthetizing cells increasing up to 2.8%. It is proposed that retinoids may accelerate the processes of MP maturation, activation and renewing. A mechanism of cooperative action of MPs and retinoids is discussed in addition to the role of DNA hyper-replication.     

Effects of redox buffer properties on the folding of a disulfide-containing protein: dependence upon pH, thiol pKa, and thiol concentration

Aliphatic thiols are effective as redox buffers for folding non-native disulfide-containing proteins into their native state at high pH values (8.0-8.5) but not at neutral pH values (6-7.5). In developing more efficient and flexible redox buffers, a series of aromatic thiols was analyzed for its ability to fold scrambled ribonuclease A (sRNase A). At equivalent pH values, the aromatic thiols folded sRNase A 10-23 times faster at pH 6.0, 7-12 times faster at pH 7.0, and 5-8 times faster at pH 7.7 than the standard aliphatic thiol glutathione. Similar correlations between thiol pK(a) values and folding rates at each pH value suggest that the apparent folding rate constants (k(app)) are a function of the redox buffer properties (pH, thiol pK(a) and [RSH]). Fitting the observed data to a three-variable model (logk(app)=-4.216(+/-0.030)+0.5816(+/-0.0036)pH-0.233(+/-0.004)pK(a)+log(1-e(-0.98(+/-0.02)[RSH]))) gave good statistics: r2=0.915, s=0.10.     

Detailed folding structures of kappa-conotoxin RIIIJ and its mutageneses obtained from 2-dimensional HP model

Kappa-conotoxin RIIIJ is a conopeptide to inhibit voltage-gated potassium channels, however, its detailed folding structures have yet to be studied. With the advance in computing power, it is possible to use the HP model to analyze all its possible folding structures. In this study, the amino acid sequences of kappa-conotoxin RIIIJ and its four mutageneses were converted into ten HP sequences according to the normalized hydrophobicity index. All 282 429 536 481 possible folding structures in each HP sequence were found using the 2-dimensional HP model, and the detailed folding structures at native state were studied. The results showed that kappa-conotoxin RIIIJ had 180 and 90 folding structures at their native state with minimal energy of -9 and -10 at pH 2 and pH 7; its mutagenesis (6-8) TPP - > SLN increased the numbers of the folding structures to 456 and 564 at pH 2 and pH 7; whereas its mutageneses (6-11) TPPKKH - > SLNLRL, (9- 11) KKH - > LRL, and (10-11) KH - > RL decreased the numbers of the folding structures to 60, 30 and 90 at both pH levels, respectively. Thereafter, the normalized hydrophobicity index was employed to distinguish those native states, and attempts were made to explain the effect of mutageneses on potassium channels in terms of the number of folding structures and numerical native states.