Salt-resistant homodimeric bactenecin, a cathelicidin-derived antimicrobial peptide

The cathelicidin antimicrobial peptide bactenecin is a beta-hairpin molecule with a single disulfide bond and broad antimicrobial activity. The proform of bactenecin exists as a dimer, however, and it has been proposed that bactenecin is released as a dimer in vivo, although there has been little study of the dimeric form of bactenecin. To investigate the effect of bactenecin dimerization on its biological activity, we characterized the dimer's effect on phospholipid membranes, the kinetics of its bactericidal activity, and its salt sensitivity. We initially synthesized two bactenecin dimers (antiparallel and parallel) and two monomers (beta-hairpin and linear). Under oxidative folding conditions, reduced linear bactenecin preferentially folded into a dimer forming a ladder-like structure via intermolecular disulfide bonding. As compared to the monomer, the dimer had a greater ability to induce lysis of lipid bilayers and was more rapidly bactericidal. Interestingly, the dimer retained antimicrobial activity at physiological salt concentrations (150 mm NaCl), although the monomer was inactivated. This salt resistance was also seen with bactenecin dimer containing one intermolecular disulfide bond, and the bactenecin dimer appears to undergo multimeric oligomerization at high salt concentrations. Overall, dimeric bactenecin shows potent and rapid antimicrobial activity, and resists salt-induced inactivation under physiological conditions through condensation and oligomerization. These characteristics shed light on the features that a peptide would need to serve as an effective therapeutic agent.     

Constitutive Dimerization of Glycoprotein VI (GPVI) in Resting Platelets Is Essential for Binding to Collagen and Activation in Flowing Blood

The platelet collagen receptor glycoprotein VI (GPVI) has been suggested to function as a dimer, with increased affinity for collagen. Dissociation constants (K(d)) obtained by measuring recombinant GPVI binding to collagenous substrates showed that GPVI dimers bind with high affinity to tandem GPO (Gly-Pro-Hyp) sequences in collagen, whereas the markedly lower affinity of the monomer for all substrates implies that it is not the collagen-binding form of GPVI. Dimer binding required a high density of immobilized triple-helical (GPO)(10)-containing peptide, suggesting that the dimer binds multiple, discrete peptide helices. Differential inhibition of dimer binding by dimer-specific antibodies, m-Fab-F and 204-11 Fab, suggests that m-Fab-F binds at the collagen-binding site of the dimer, and 204-11 Fab binds to a discrete site. Flow cytometric quantitation indicated that GPVI dimers account for ～29% of total GPVI in resting platelets, whereas activation by either collagen-related peptide or thrombin increases the number of dimers to ～39 and ～44%, respectively. m-Fab-F inhibits both GPVI-dependent static platelet adhesion to collagen and thrombus formation on collagen under low and high shear, indicating that pre-existing dimeric GPVI is required for the initial interaction with collagen because affinity of the monomer is too low to support binding and that interaction through the dimer is essential for platelet activation. These GPVI dimers in resting circulating platelets will enable them to bind injury-exposed subendothelial collagen to initiate platelet activation. The GPVI-specific agonist collagen-related peptide or thrombin further increases the number of dimers, thereby providing a feedback mechanism for reinforcing binding to collagen and platelet activation.     

Crystal structure analysis and solution studies of human Lck-SH3; zinc-induced homodimerization competes with the binding of proline-rich motifs

In cytosolic Src-type tyrosine kinases the Src-type homology 3 (SH3) domain binds to an internal proline-rich motif and the presence or the absence of this interaction modulates the kinase enzymatic activity. The Src-type kinase Lck plays an important role during T-cell activation and development, since it phosphorylates the T-cell antigen receptor in an early step of the activation pathway. We have determined the crystal structure of the SH3 domain from Lck kinase at a near-atomic resolution of 1.0 A. Unexpectedly, the Lck-SH3 domain forms a symmetrical homodimer in the crystal and the dimer comprises two identical zinc-binding sites in the interface. The atomic interactions formed across the dimer interface resemble strikingly those observed between SH3 domains and their canonical proline-rich ligands, since almost identical residues participate in both contacts. Ultracentrifugation experiments confirm that in the presence of zinc ions, the Lck-SH3 domain also forms dimers in solution. The Zn(2+) dissociation constant from the Lck-SH3 dimer is estimated to be lower than 100 nM. Moreover, upon addition of a proline-rich peptide with a sequence corresponding to the recognition segment of the herpesviral regulatory protein Tip, competition between zinc-induced homodimerization and binding of the peptide can be detected by both fluorescence spectroscopy and analytical ultracentrifugation. These results suggest that in vivo, too, competition between Lck-SH3 homodimerization and binding of regulatory proline-rich sequence motifs possibly represents a novel mechanism by which kinase activity is modulated. Because the residues that form the zinc-binding site are highly conserved among Lck orthologues but not in other Src-type kinases, the mechanism might be peculiar to Lck and to its role in the initial steps of T-cell activation.     

Molecular insight into mechanism of antimicrobial action of the beta-hairpin peptide arenicin: specific oligomerization in detergent micelles

Arenicins are 21-residue cationic antimicrobial peptides isolated from marine polychaeta Arenicola marina. The peptides exhibit potent broad-spectrum antimicrobial activity. In water solution arenicin-2 adopts a beta-hairpin conformation, stabilized by one disulfide and nine hydrogen bonds. To determine the propensity for the peptide oligomerization in membrane mimetic systems, the recombinant arenicin-2 was overexpressed as a fused form in Escherichia coli. The arenicin-2 oligomerization and intermolecular packing in membrane mimicking environment were investigated using high-resolution NMR spectroscopy. The present studies show that arenicin-2 preserves a beta-hairpin structure and forms asymmetric dimers upon incorporation into the dodecylphosphocholine micelle. Two monomers of arenicin-2 are aligned parallel to each other by the N-terminal strands of the beta-hairpin (CN upward arrow upward arrowNC type of association). Polyacrylamide gel electrophoresis analysis indicated that in environment of anionic SDS micelles the arenicin-2 might undergo further oligomerization and form tetramers. Our results afford further molecular insight into possible mechanism of antimicrobial action of arenicins.     

In vitro study on binding interaction of quinapril with bovine serum albumin (BSA) using multi-spectroscopic and molecular docking methods

The binding interaction between quinapril (QNPL) and bovine serum albumin (BSA) in vitro has been investigated using UV absorption spectroscopy, steady-state fluorescence spectroscopic, synchronous fluorescence spectroscopy, 3D fluorescence spectroscopy, Fourier transform infrared spectroscopy, circular dichroism, and molecular docking methods for obtaining the binding information of QNPL with BSA. The experimental results confirm that the quenching mechanism of the intrinsic fluorescence of BSA induced by QNPL is static quenching based on the decrease in the quenching constants of BSA in the presence of QNPL with the increase in temperature and the quenching rates of BSA larger than 10¹⁰ L mol^?1 s^?1, indicating forming QNPL–BSA complex through the intermolecular binding interaction. The binding constant for the QNPL–BSA complex is in the order of 10⁵ M^?1, indicating there is stronger binding interaction of QNPL with BSA. The analysis of thermodynamic parameters together with molecular docking study reveal that the main binding forces in the binding process of QNPL with BSA are van der Waal’s forces and hydrogen bonding interaction. And, the binding interaction of BSA with QNPL is an enthalpy-driven process. Based on Förster resonance energy transfer, the binding distance between QNPL and BSA is calculated to be 2.76 nm. The results of the competitive binding experiments and molecular docking confirm that QNPL binds to sub-domain IIA (site I) of BSA. It is confirmed there is a slight change in the conformation of BSA after binding QNPL, but BSA still retains its secondary structure α-helicity.     

Density functional studies of closed-shell attractions of S(AuPH3)2 and HS(AuPH3)2 + and their dimers

With the help of quantum chemical calculations, S(AuPH₃)₂, [HS(AuPH₃)₂]⁺ and their dimers have been examined by using scalar-relativistic theory. In agreement with experimental data, [HS(AuPH₃)₂ ⁺]₂ is a C_2h structure. However, [S(AuPH₃)₂]₂ is predicted to favor a D_2d structure. Experimental structure parameters of the title compounds were reproduced at the Xα level. The electronic structure and HOMO–LUMO gaps were investigated. When two monomers formed a dimer, the electronic structure of the dimer changed only slightly, but the chemical stability decreased. The intermolecular aurophilic interaction energy is decomposed and analyzed.     

Structural characterization of the two refold dimers of recombinant bovine somatotropin (bST)

Two major dimers are generated during the folding/oxidation of inclusion bodies of recombinant bovine somatotropin (bST). These dimers represent the major part of the inactive high molecular weight species that are formed in this process. The structures of the two dimers are unambiguously determined by peptide mapping using trypsin, thrombin cleavage, and selective DTT reduction experiments. Results indicate that the formation of both dimers involves the large disulfide loop cysteines. The latter-eluting dimer from RP-HPLC, previously reported as a large loop concatenated dimer, was revised to be an antiparallel disulfide-linked dimer. On the other hand, the first eluting dimer is a concatenane in which two monomers are held together by the interlocking of the two large disulfide loops.     

The accessibility of cys-120 in CheA(S) is important for the binding of CheZ and enhancement of CheZ phosphatase activity

The cheA gene of Escherichia coli encodes two proteins from in-frame tandem translation start sites. The long form of CheA (CheA(L)) is the histidine kinase responsible for phosphorylating the response regulator, CheY. The short form of CheA (CheA(S)) is identical in domain structure to CheA(L) except that it is missing the first 97 amino acids. Reduced CheA(S) bound to and enhanced the activity of the phosphatase of phospho-CheY, CheZ. Oxidized CheA(S) was unable to interact with CheZ. Oxidized CheA(S) formed covalent dimers, whereas CheA(L) did not. This property was believed to be the result of an intermolecular disulfide bond. The CheA proteins contain three cysteine residues, one of which likely lies within the CheZ binding region of CheA(S) and is exposed to solvent. We identified the CheZ binding domain of CheA(S) by testing the various fragments of CheA(S) that contain cysteine residues for CheZ binding activity in an ELISA-based CheA(S)-CheZ binding assay. Fragments of CheA(S) lacking the truncated P1 domain of CheA(S) ('P1) were unable to bind CheZ. We also found that a fusion of the first 42 amino acids of CheA(S) ('P1 domain) to GST bound CheZ and enhanced its activity. The interaction between the GST-CheA[98-139] fusion protein and CheZ was dependent on the accessibility of a cysteine residue (Cys-120) located in the 'P1 domain.     

Impacts of Cd(II) on the conformation and self-aggregation of Alzheimer's tau fragment corresponding to the third repeat of microtubule-binding domain

Environmental exposure to some heavy metals such as cadmium appears to be a risk factor for Alzheimer's disease (AD), however, definite mechanism of their toxicity in AD remains to be elucidated. Previous studies largely focused on the metal ions binding to beta-amyloid, however, very few papers concerned the interaction between tau and metal ions. For the first time, we investigated the impacts of Cd(II) on the conformation and self-aggregation of Alzheimer's tau peptide R3, corresponding to the third repeat of microtubule-binding domain. The initial state of R3 was proven to be dimeric linked by intermolecular disulfide bond, in the non-reducing buffer (Tris-HCl buffer pH7.5, containing no reducing reagent). In this paper, we show that Cd(II) can accelerate heparin-induced aggregation of R3 or independently induce the aggregation of R3, as monitored by ThS fluorescence. In the presence of Cd(II), the resulting R3 filaments became much smaller, as revealed by electron microscopy. Binding to the Cd(II) ion, the dimeric R3 partially lost its random coil, and converted to alpha-helix structure, as revealed by CD and Raman spectrum. Stoichiometric analysis of CD signal against the ratio of [Cd(II)]/[R3] suggested that the coordination intermediate consisted of two R3 dimers binding to a central cadmium ion. As the seed, the coordination intermediate could extensively accelerate the self-aggregation of R3 via promoting the nucleation step. On the other hand, gain in alpha-helix structure on the peptide chain, by coordinating with Cd(II), could be a critical role to promote self-aggregation, as revealed by Raman spectrum. These results provide a further insight into the mechanism of tau filament formation and emphasize the possible involvement of Cd(II) in the pathogenesis of AD.     

Identification of single amino acid residues essential for the binding of lipopolysaccharide (LPS) to LPS binding protein (LBP) residues 86-99 by using an Ala-scanning library.

Lipopolysaccharide binding protein (LBP) is a 60 kDa acute phase glycoprotein capable of binding to LPS of Gram-negative bacteria and facilitating its interaction with cellular receptors. This process is thought to be of great importance in systemic inflammatory reactions such as septic shock. A peptide corresponding to residues 86-99 of human LBP (LBP86-99) has been reported to bind specifically with high affinity the lipid A moiety of LPS and to inhibit the interaction of LPS with LBP. We identified essential amino acids in LBP86-99 for binding to LPS by using a peptide library corresponding to the Ala-scanning of human LBP residues 86-99. Amino acids Trp91 and Lys92 were indispensable for peptide-LPS interaction and inhibition of LBP-LPS binding. In addition, several alanine-substituted synthetic LBP-derived peptides inhibited LPS-LBP interaction. Substitution of amino acids Arg94, Lys95 and Phe98 by Ala increased the inhibitory effect. The mutant Lys95 was the most active in blocking LPS binding to LBP. These findings emphasize the importance of single amino acids in the LPS binding capacity of small peptides and may contribute to the development of new drugs for use in the treatment of Gram-negative bacterial sepsis.     

Cutting edge: cationic antimicrobial peptides block the binding of lipopolysaccharide (LPS) to LPS binding protein

We investigated the mechanism by which cationic antimicrobial peptides block the activation of macrophages by LPS. The initial step in LPS signaling is the transfer of LPS to CD14 by LPS binding protein (LBP). Because many cationic antimicrobial peptides bind LPS, we asked whether these peptides block the binding of LPS to LBP. Using an assay that measures the binding of LPS to immobilized LBP, we show for the first time that a variety of structurally diverse cationic antimicrobial peptides block the interaction of LPS with LBP. The relative ability of different cationic peptides to block the binding of LPS to LBP correlated with their ability to block LPS-induced TNF-alpha production by the RAW 264.7 macrophage cell line.     

Cys146-Cys146分子间二硫键在人瘦素二聚化过程中起主导作用

在前期研究中,已发现人瘦素（leptin）在体外再折叠过程中会形成稳定的二聚体,但其二聚化机制尚不清楚. 本研究旨在分析瘦素二聚体的结构特性,并重点研究体外再折叠过程中瘦素二聚化的机制. 相较与瘦素单体,瘦素二聚体保留了约75％免疫活性及15％受体结合活性,同时显示出明显慢的天然电泳迁移率. 圆二色性分析显示,二聚体基本保留了单体α螺旋索结构特征. 还原性及非还原性凝胶电泳分析和自由巯基测定结果表明,瘦素二聚体是由一对分子间二硫键连接2个单体而成的.为了确定瘦素二聚化过程中起主导作用的分子间二硫键,利用PCR定点突变技术构建了C96S和C146S两个突变体瘦素. 通过分析C96S及C146S突变体瘦素的体外再折叠特性及过程,并与野生型瘦素相比较,揭示C96S瘦素的二聚体显示出与野生型瘦素二聚体相似的特性,而C146S瘦素不能形成结构稳定的二聚体. 以上研究结果表明,Cys146-Cys146分子间二硫键在人瘦素二聚化过程中起主导作用.     

Spectroscopic and molecular docking studies on the interaction between N‐acetyl cysteine and bovine serum albumin

The interaction between N‐acetyl cysteine (NAC) and bovine serum albumin (BSA) was investigated by UV–vis, fluorescence spectroscopy, and molecular docking methods. Fluorescence study at three different temperatures indicated that the fluorescence intensity of BSA was reduced upon the addition of NAC by the static quenching mechanism. Binding constant (K_b) and the number of binding sites (n) were determined. The binding constant for the interaction of NAC and BSA was in the order of 10³ M^?1, and the number of binding sites was obtained to be equal to 1. Enthalpy (ΔH), entropy (ΔS), and Gibb's free energy (ΔG) as thermodynamic values were also achieved by van't Hoff equation. Hydrogen bonding and van der Waals force were the major intermolecular forces in the interaction process and it was spontaneous. Finally, the binding mode and the binding sites were clarified using molecular docking which were in good agreement with the results of spectroscopy experiments. © 2015 Wiley Periodicals, Inc. Biopolymers 103: 638–645, 2015.     

High-resolution X-ray structure of the unexpectedly stable dimer of the [Lys(-2)-Arg(-1)-des(17-21)]endothelin-1 peptide

Previous structural studies on the [Lys((-2))-Arg((-1))]endothelin-1 peptide (KR-ET-1), 540-fold less potent than ET-1, strongly suggested the presence of an intramolecular Arg(-1)-Asp(8) (R(-1)-D(8)) salt bridge that was also observed in the shorter [Lys((-2))-Arg((-1))-des(17-21)]endothelin-1 derivative (KR-CSH-ET). In addition, for these two analogues, we have shown that the Lys-Arg dipeptide, which belongs to the prosequence, significantly improves the formation of the native disulfide bonds (>or=96% instead of approximately 70% for ET-1). In contrast to what was inferred from NMR data, molecular dynamics simulations suggested that such an intramolecular salt bridge would be unstable. The KR-CSH-ET peptide has now been crystallized at pH 5.0 and its high-resolution structure determined ab initio at 1.13 A using direct methods. Unexpectedly, KR-CSH-ET was shown to be a head-to-tail symmetric dimer, and the overall interface involves two intermolecular R(-1)-D(8) salt bridges, a two-stranded antiparallel beta-sheet, and hydrophobic contacts. Molecular dynamics simulations carried out on this dimer clearly showed that the two intermolecular salt bridges were in this case very stable. Sedimentation equilibrium experiments unambiguously confirmed that KR-ET-1 and KR-CSH-ET also exist as dimers in solution at pH 5.0. On the basis of the new dimeric structure, previous NMR data were reinterpreted. Structure calculations were performed using 484 intramolecular and 38 intermolecular NMR-derived constraints. The solution and the X-ray structures of the dimer are very similar (mean rmsd of 0.85 A). Since the KR dipeptide at the N-terminus of KR-CSH-ET is present in the prosequence, it can be hypothesized that similar intermolecular salt bridges could be involved in the in vivo formation of the native disulfide bonds of ET-1. Therefore, it appears to be likely that the prosequence does assist the ET-1 folding in a chaperone-like manner before successive cleavages that yield the bioactive ET-1 hormone.     

Solution structure of the disulfide-linked dimer of human intestinal trefoil factor (TFF3): the intermolecular orientation and interactions are markedly different from those of other dimeric trefoil proteins

The trefoil protein TFF3 forms a homodimer (via a disulfide linkage) that is thought to have increased biological activity over the monomer. The solution structure of the TFF3 dimer has been determined by NMR and compared with the structure of the TFF3 monomer and with other trefoil dimer structures (TFF1 and TFF2). The most significant structural differences between the trefoil domain in the monomer and dimer TFF3 are in the orientations of the N-terminal 3(10)-helix (residues 10-12) and in the presence in the dimer of an additional 3(10)-helix (residues 53-55) outside of the core region. The TFF3 dimer forms a more compact structure as compared with the TFF1 dimer where the two trefoil domains are connected by a flexible region with the monomer units being at variable distances from each other and in many different orientations. Although TFF2 is also a compact structure, the dispositions of its monomer units are very different from those of TFF3. The structural differences between the dimers result in the two putative receptor/ligand binding sites that remain solvent exposed in the dimeric structures having very different dispositions in the different dimers. Such differences have significant implications for the mechanism of action and functional specificity for the TFF class of proteins.     

Acid activation of protyrosinase from Aspergillus oryzae: homo-tetrameric protyrosinase is converted to active dimers with an essential intersubunit disulfide bond at acidic pH

Aspergillus oryzae protyrosinase (pro-TY) has a unique feature that the proenzyme is activated under conditions of acidic pH. The pro-TY was inactive at pH 7.0. The latent enzyme was activated at pH 3.0, and was slightly activated by sodium dodecyl sulfate (SDS). The molecular masses of the pro-TY and acid-activated tyrosinase (acid-TY) were 266 and 165 kDa, respectively, as estimated by gel-filtration chromatography. The CD spectra showed that the tertiary and/or quaternary structure was changed after the acid activation. On the basis of these results, we deduce that the intersubunit polar interaction is disrupted at pH 3.0, and that the tetrameric pro-TY dissociates to dimers. Tryptophan fluorescence spectra and binding assay of 8-anilino-1-naphthalene sulfonic acid (ANS) suggested that hydrophobic amino acid residues of the active site were exposed to solvent after acid treatment. It was likely that Cys108 formed an intermolecular disulfide bond between the subunits of dimeric acid-TY. The dimerization of acid-TY involving the intermolecular disulfide bond is essential for the activity.     

Formation, structure, and dissociation of the ribonuclease S three-dimensional domain-swapped dimer

Post-translational events, such as proteolysis, are believed to play essential roles in amyloid formation in vivo. Ribonuclease A forms oligomers by the three-dimensional domain-swapping mechanism. Here, we demonstrate the ability of ribonuclease S, a proteolytically cleaved form of ribonuclease A, to oligomerize efficiently. This unexpected capacity has been investigated to study the effect of proteolysis on oligomerization and amyloid formation. The yield of the RNase S dimer was found to be significantly higher than that of RNase A dimers, which suggests that proteolysis can activate oligomerization via the three-dimensional domain-swapping mechanism. Characterization by chromatography, enzymatic assays, and NMR spectroscopy indicate that the structure of the RNase S dimer is similar to that of the RNase A C-dimer. The RNase S dimer dissociates much more readily than the RNase A C-dimer does. By measuring the dissociation rate as a function of temperature, the activation enthalpy and entropy for RNase S dimer dissociation were found to resemble those for the release of the small fragment (S-peptide) from monomeric RNase S. Excess S-peptide strongly slows RNase S dimer dissociation. These results strongly suggest that S-peptide release is the rate-limiting step of RNase S dimer dissociation.     

Thallium-205 NMR determination of the thermodynamics of the interaction between the thallous ion and gramicidin dimers incorporated into micelles

A study has been made of the thermodynamics of the interaction between the thallous ion and gramicidin dimers incorporated into micelles using thallium-205 NMR spectroscopy. The chemical shift data obtained are interpreted interms of a model in which the dimer has only one tight binding site. The variation of the binding constant over the temperature range 303-323 K is used to determine the changes in enthalpy and entropy of binding giving values of -11.3 kcal/mole and -16 e.u. at 303 K, respectively.