Preparation and Characterization of Chemically Modified Silk Cotton Hull Activated Carbon and Its Effects on Cd(II) Removal from Aqueous Solutions

The novel biosorbent silk cotton hull, an agrowaste material, has been successfully utilized for the removal of cadmium(II) from aqueous solutions. The adsorption of cadmium onto three kinds of activated biosorbent has been studied: modified by concentrated sulfuric acid alone (AC), a mixture of concentrated sulfuric acid and hydrogen peroxide (AC1), and a mixture of concentrated sulfuric acid and ammonium persulfate (AC2). The adsorption studies were carried out to optimize the process parameters such as pH, adsorbent dosage, contact time, and initial metal ion concentration. Maximum metal removal was observed at pH 7.0 with a contact time of 90 min at stirring speed of 200 rpm with an adsorbent dosage of 4.0 g L^?1. The sorption isotherms were studied using the Langmuir, Freundlich, and Tempkin isotherm models. The maximum adsorption capacities were 100.00, 142.86, and 142.87 mg g^?1 for AC, AC1, and AC2, respectively. Accordingly, the surface modification of the activated carbons AC1 and AC2 enhanced cadmium removal greatly. The experiments demonstrated that the removal of metal ions followed the pseudo-second-order kinetic model. The sorption mechanism is discussed in terms of the activated surface properties. A relationship between the oxygen content and sorption was found in this novel material. Desorption experiments were carried out using hydrochloric acid with a view to generate the spent adsorbent and to recover the adsorbed metal ions.     

Nickel Removal from Aqueous Solutions Using Sheep Manure Wastes

This paper reports a study on the potential use of sheep manure waste (SMW) for the removal of nickel ions from aqueous solutions. The adsorption of nickel ions from aqueous solutions on SMW has been studied as functions of contact time, initial pH, amount of sorbent, sorbent particle size, initial concentration of nickel ions, salt, and chelating agents. The experimental results showed that the SMW has a high affinity for nickel binding, where 79 % removal of 100 ppm initial nickel ions concentration was obtained using 8.0 mg SMW/mL, at pH 6.5 in 4 minutes equilibrium time. The equilibrium adsorption data were analyzed using four different isotherms: the Langmuir, Freundlich, Redlich‐Peterson, and Sips isotherm equations. The results of the kinetic studies showed that the adsorption of nickel ions on SMW is a pseudo‐first order with respect to the nickel ions solution concentration.     

Arsenic Removal from Aqueous Solutions by Different Bacillus and Lysinibacillus Species

Removal of toxic and carcinogenic arsenic from underground water is very essential for the safety of water that may be used for drinking or irrigation. In this study, six different bacterial strains were recently isolated from a groundwater sample, routinely used for irrigation at Taif City, Kingdom of Saudi Arabia, containing arsenic, vanadium, and boron. The isolates were molecularly identified and the 16S rDNA sequencing data revealed their belonging to two different genera, Bacillus and Lysinibacillus. B. cereus strains EA4, EA5, and EA6 were able to resist arsenic up to 15 mg/L. B. cereus strain EA5 and a mixed culture of L. sphaericus EA1, B. fusiformis EA2, and Lysinibacillus sp. EA3 were found to be efficient in bioremediation of arsenic oxychloride up to 94.9% and 99.7%, respectively. Due to these near-standard records, these strains are strongly recommended for bioremediation of the highly toxic arsenic from the environment. B. cereus EA5 was also effective to remediate different concentrations of arsenic. High concentrations of arsenic showed dramatic decrease in the bioremediation activity of this strain. Reduction in cell size was distinct in scanning electron micrographs when cells were exposed to arsenic. Besides, protein electrophoresis showed that around 15 different stress proteins were produced when cells of B. cereus EA5 were exposed to arsenic oxychloride.     

Removal of Linear and Branched Alkylphenols from Aqueous Solutions with Horseradish Peroxidase

Alkylphenols were effectively treated with horseradish peroxidase at pH 7.0 and 30 °C in the presence of H₂O₂ and poly(ethylene glycol) irrespective of the relative position or isomeric form of the alkyl chains. Water-insoluble oligomer precipitates were readily filtered out after enzymatic treatment, and transparent and colorless solutions were obtained for all p- and m-alkylphenols used.     

Uptake of Vibrio cholerae Biotype eltor from Contaminated Water by Water Hyacinth (Eichornia crassipes)

Vibrio cholerae biotype eltor appears to concentrate on the surface of the water hyacinth (Eichornia crassipes), thereby enhancing its survival and its potential for transmission through waterways of cholera-endemic regions such as Bangladesh.     

Preparation,Characterization and Application of Magnetic Fe3O4-CS for the Adsorption of Orange I from Aqueous Solutions

Fe₃O₄ (Fe₃O₄-CS) coated with magnetic chitosan was prepared as an adsorbent for the removal of Orange I from aqueous solutions and characterized by FTIR, XRD, SEM, TEM and TGA measurements. The effects of pH, initial concentration and contact time on the adsorption of Orange I from aqueous solutions were investigated. The decoloration rate was higher than 94% in the initial concentration range of 50–150 mg L⁻¹ at pH 2.0. The maximum adsorption amount was 183.2 mg g⁻¹ and was obtained at an initial concentration of 400 mg L⁻¹ at pH 2.0. The adsorption equilibrium was reached in 30 minutes, demonstrating that the obtained adsorbent has the potential for practical application. The equilibrium adsorption isotherm was analyzed by the Freundlich and Langmuir models, and the adsorption kinetics were analyzed by the pseudo-first-order and pseudo-second-order kinetic models. The higher linear correlation coefficients showed that the Langmuir model (R² = 0.9995) and pseudo-second-order model (R² = 0.9561) offered the better fits.     

Preparation and Characterization of Artificial Antigens for Cadmium and Lead

Cadmium and lead were conjugated to two carrier proteins using a bifunctional chelator [2-(4-aminobenzyl)-diethylenetriaminepentaacetic acid] to synthesize artificial antigens for cadmium and lead. The techniques, including ultraviolet spectrometry, circular dichroism, sodium dodecyl sulfate polyacrylamide gel electrophoresis, and inductively coupled plasma optical emission spectroscopy, were utilized for characterizing the artificial antigens. The results of ultraviolet spectrometry showed characteristic absorption peak shifts between conjugates and carrier proteins. Circular dichroism resulted that the second structure of the conjugates was ??-helix. The sodium dodecyl sulfate polyacrylamide gel electrophoresis results revealed the differences of band migration and molecular weight among antigens, chelator protein conjugate, and carrier proteins. The result of coupling ratios revealed that the metal content of the antigens was much higher than that of carrier proteins. These results indicated that the artificial antigens of cadmium and lead were synthesized successfully and had potential application in immunoassays of cadmium and lead ions.     

Fixed-Bed Studies on Removal of Arsenic from Simulated Aqueous Solutions Using Chitosan Nanoparticles

Arsenic is a toxic element and may be found in natural as well as in industrial water; therefore, before using water for drinking purpose, its proper treatment is required. Thus, the aim of this work was to evaluate the potential of chitosan nanoparticles, in a continuous-flow method, for the removal of arsenic (III) and (V) from aqueous solutions. All experiments were conducted in fixed-bed columns. Experiments were carried out as a function of varying liquid flow rate (0.3–1.0 ml/min), initial metal concentration (0.5–1.5 mg/L), and bed height (3–9 cm) of adsorbent. The total adsorbed quantity, equilibrium uptake, and total percentage removal of arsenic ions were determined by evaluating the breakthrough curves obtained at different flow rates, initial concentrations, and bed heights. The results showed that the column performed well at the lowest flow rate. Also, column bed capacity and exhaustion time were found to increase with increasing bed height. When initial metal ion concentration was increased from 0.5 to 1.5 mg/L, the corresponding adsorption bed capacity decreased from 0.076 to 0.028 mg/g. The bed depth service time model (BDST) model was used to analyze the experimental data and the model parameters were evaluated. The calculated values of N _o and K _a were found to be 19.28 × 10^?2 mg/L and 0.662 L/mg·min, respectively. Good agreement was found between the experimental breakthrough curves and the model predictions.     

Nickel as an accelerator of biogas production in water hyacinth (Eichornia crassipes solms.)

The effect of nickel ions on biogas production has been investigated in 3-litre fermenters. It was observed that nickel is stimulatory up to 5 ppm, with an optimum at 2·5 ppm, in a water hyacinth-bovine excreta substrate. A similar effect with nickel was also observed at 5 ppm in bovine excreta.     

Purification of waste water from olive-oil pressing plants using hydrophytes. Preliminary study on the use of Eichornia crassipes

The use of Eichornia crassipes has been tested in order to depurate the waste water from olive oil factories. The control of some parameter variations during the treatment, such as COD, total azote, dissolved oxygen and pH, has given encouraging results about the depurative efficacy of employed hydrophytae. Particularly indicative is, in this regard, COD rejection of about 60%.     

Biosorption and Reuse Potential of a Blue Green Alga for the Removal of Hazardous Reactive Dyes from Aqueous Solutions

The adsorption potential of a nonliving alga Nostoc comminutum for the removal of hazardous dyes from aqueous solutions was assessed. The algal biomass in its native form exhibited the highest dye removal efficiency at a pH of 1 and at a contact time of 50 min. The effect of various chemical pretreatments was studied in order to assess the role of surface chemistry and the underlying mechanism. Combined with Fourier transform infrared (FTIR) studies, it was concluded that the carboxylic and amine groups played a dominant role in the dye binding process. pH studies further revealed that besides the electrostatic mechanism, other physical interactions might be operative, which is also revealed from the Dubinin-Radushkevich (D-R) isotherm model. Kinetic studies indicated that the adsorption process followed the second-order kinetics and particle diffusion mechanisms were operative. Thermodynamic studies revealed that the adsorption of two dyes onto the algal biomass was feasible, spontaneous, and exothermic under the studied conditions. Microwave irradiation was proposed as a green method for the regeneration and reuse of the biomass. A 16% loss in the regeneration efficiency of the biosorbent was observed, which reveals its stability and reuse potential. Column experiments with real textile wastewater established the practicality of the developed system. Finally, a comparative study revealed the efficacy of the biosorbent with other previously reported biosorbents for dye removal.     

The Suitability of Jatropha Seed Press Cake as a Biosorbent for Removal of Hexavalent Chromium from Aqueous Solutions

Jatropha seed press cake (JPC), a biodeisel waste, was investigated for its use as biosorbent for Cr(VI) removal from wastewater. The acid-pretreated biomass exhibited 1.9-fold higher biosorption efficiency for Cr(VI). The Cr(VI) biosorption efficiency was found to increase with decrease in pH of aqueous medium. The adsorption capacity of biosorbent for Cr(VI) increased with increasing concentration of Cr(VI). The biosorption of Cr(VI) by acid-treated JPC followed a pseudo-second-order kinetics. The results of equilibrium studies showed that the biosorption process fitted the Langmuir isotherm model, with a maximum adsorption capacity of 22.727 mg of Cr(VI)/g of biosorbent at 30°C. The activation energy was found to be 27.114 kJ/mol, suggesting that the adsorption process was mainly a physical process. The important thermodynamic parameters of adsorption (ΔG, ΔH, andΔS) were determined, which indicated that the Cr(VI) sorption by JPC is a spontaneous and endothermic process.     

Fish (Labeo rohita) Scales as Potential Low-Cost Biosorbent for Removal of Malachite Green from Aqueous Solutions

The feasibility of using fish (Labeo rohita) scales as low-cost biosorbent for the removal of hazardous Malachite Green (MG) dye from aqueous solutions was investigated. Employing a batch experimental setup, the effect of operational parameters such as biosorbent dose, initial solution pH, contact time, and temperature on the dye removal process was studied. The equilibrium biosorption data followed both Langmuir and Freundlich isotherm models, whereas the experimental kinetic data fitted well to the pseudo-second-order kinetic model. Thermodynamic study indicated spontaneous and endothermic nature of the biosorption process. The results suggest that fish scales could be used as an effective biosorbent for removal of MG dye from aqueous solutions.     

Molecular Characterization of Endophytic Bacteria from Metal Hyperaccumulator Aquatic Plant (Eichhornia crassipes) and Its Role in Heavy Metal Removal

In this study, among a collection of heavy metals resistant endophytic bacterial strains isolated from aquatic hyperaccumulator plant (Eichhornia crassipes), one plant growth promoting endophytic bacteria (PGPE), SVUB4 was selected for its ability to utilize 1-aminocyclopropane-1-carboxylic acid (ACC) as the sole N source and accumulate different heavy metals. The SVUB4 strain was characterized as Enterobacter sp. on the basis of its 16S rDNA sequences. Assessment of the parameters of plant growth promotion revealed the intrinsic ability of the strain for the production of IAA, siderophore and solubilization of insoluble phosphate. Furthermore, plasmid DNA analysis of Enterobacter sp. strain SVUB4 indicated the presence of a single large plasmid element. The results of plasmid curing experiments demonstrated that the ability of this strain to grow in presence of Cd and Zn was encoded by the 98 kb plasmid, whereas the ability to grow in the presence of Pb appeared to be encoded by the chromosome. The Cd and Zn removal capacity of the respective metal sensitive strain (plasmidless) were about 36 and 45 μg/g-1 DW, respectively, while the removal capacity of the both metal by metal resistant strain (p SVUB4) showed a significantly higher Cd and Zn removal capacity of 153 and 228 μg/g^?1 DW, respectively. However, both strains exhibited a similar pattern of Pb accumulation. The present observation also showed that for wild-type strain SVUB4 (pSVUB4), the overall level of IAA production in the absence and in the presence of Cd²⁺ or Zn²⁺was approximately the same. Nevertheless, strain SVUB4M in this respect appeared to be more sensitive to heavy metals: a noticeable decrease in IAA production was observed under the effect of both metals, especially with Cd²⁺.     

Effects of 2,4-D on mature and juvenile plants of water hyacinth (Eichornia crassipes (Mart.) Solms)

The effects of various concentrations of the herbicide 2,4-D were investigated on two vegetative forms of water hyacinth including juvenile and mature forms. The results obtained suggest that efficient chemical control of water hyacinth may be best applied at the early stages of vegetative development of the water hyacinth, i.e. at the juvenile phase. This would require the use of 2,4-D at a concentration of 60 000 ppm (2.2 kg/ ha) which equals to half the rate of 2,4-D normally used for control of water hyacinth in the Sudan. The lower rate of 2,4-D not only means a considerable reduction in quantity and cost of the consumed herbicide but also a substantial minimisation in the level at which pollution may build up in the White Nile of the Sudan.     

Removal of Pesticide Oxadixyl from an Aqueous Solution

The mycelium of Phomopsis helianthi (Ascomycete) was hydrolyzed with boiling NaOH to give an insoluble fraction composed of chitosan and glucans. The biomass obtained was tested as an agent for the removal of pesticides from an aqueous solution. Oxadixyl, which has a solubility in water of 3400 mg L^-1, has been chosen as a hydrophilic organic contaminant model. The new, cheap material was demonstrated to recover up to 6 mg of oxadixyl per gram of adsorbent. The experimental data show an excellent correlation with the Langmuir isotherm model.     

Equilibrium and Kinetic Studies on the Removal of Basic Violet 10 from Aqueous Solutions Using Activated Carbons Prepared from Industrial Wastes

Low-cost adsorbents prepared from industrial wastes such as sugarcane bagasse (BC), rice husk (RC), and textile waste cloth (TC) are identified as suitable sorbents for removing basic violet 10 (BV). Fourier transform infrared (FTIR) and scanning electron microscopic (SEM) studies were carried out to characterize the prepared sorbents. The effects of dosage, time, and pH on dye removal were examined. It was observed that BV sorption takes place in acidic, neutral, and alkaline aqueous solutions. The work discussed the best-fit sorption isotherms among Freundlich and Langmuir, in addition to the reaction- and diffusion-based kinetic models. Based on the data obtained, it was found that the BV sorption took place in acidic, neutral, and alkaline aqueous solutions and sorption kinetics found to be controlled by pseudo-second-order and pore diffusion models. Also, thermodynamic parameters such as ΔG ^o, ΔH ^o, ΔS ^o, and E _a were calculated in order to understand the nature of the sorption process. The maximum dye removal capacity (DRC) was found to be 5608, 1244, and 27,495 mg/kg for BC, RC, and TC, respectively. Collectively, it can be concluded that the activated carbon sorbents, prepared from the named wastes, can used to adequately remove the basic violet dye from its aqueous waste solution.     

Phytoremedial Potential of Typha latifolia,Eichornia crassipes and Monochoria hastata found in Contaminated Water Bodies Across Ranchi City (India)

Phytoremediation is an emerging technology that uses green plants (living machines) for removal of contaminants of concern (COC). These plant species have the potential to remove the COC, thereby restoring the original condition of soil or water environment. The present study focuses on assessing the heavy metals (COC) present in the contaminated water bodies of Ranchi city, Jharkhand, India. Phytoremedial potential of three plant species: Typha latifolia, Eichornia crassipes and Monochoria hastata were assessed in the present study. Heterogenous accumulation of metals was found in the three plant species. It was observed that the ratio of heavy metal concentration was different in different parts, i.e., shoots and roots. Positive results were also obtained for translocation factor of all species with minimum of 0.10 and maximum of 1. It was found experimentally that M. hastata has the maximum BFC for root as 4.32 and shoot as 2.70 (for Manganese). For T. latifolia, BCF of maximum was observed for root (163.5) and respective shoot 86.46 (for Iron), followed by 7.3 and 5.8 for root and shoot (for Manganese) respectively. E. crassipes was found to possess a maximum BCF of 278.6 (for Manganese and 151 (for Iron) and shoot as 142 (for Manganese) and 36.13 (for Iron).