Powering DNA repair through substrate electrostatic interactions

The reaction catalyzed by the DNA repair enzyme uracil DNA glycosylase (UDG) proceeds through an unprecedented stepwise mechanism involving a positively charged oxacarbenium ion sugar and uracil anion leaving group. Here we use a novel approach to evaluate the catalytic contribution of electrostatic interactions between four essential phosphodiester groups of the DNA substrate and the cationic transition state. Our strategy was to substitute each of these phosphate groups with an uncharged (R)- or (S)-methylphosphonate linkage (MeP). We then compared the damaging effects of these methylphosphonate substitutions on catalysis with their damaging effects on binding of a cationic 1-azadeoxyribose (1-aza-dR(+)) oxacarbenium ion analogue to the UDG-uracil anion binary complex. A plot of log k(cat)/K(m) for the series of MeP-substituted substrates against log K(D) for binding of the 1-aza-dR(+) inhibitors gives a linear correlation of unit slope, confirming that the electronic features of the transition state resemble that of the 1-aza-dR(+), and that the anionic backbone of DNA is used in transition state stabilization. We estimate that all of the combined phosphodiester interactions with the substrate contribute 6-8 kcal/mol toward lowering the activation barrier, a stabilization that is significant compared to the 16 kcal/mol catalytic power of UDG. However, unlike groups of the enzyme that selectively stabilize the charged transition state by an estimated 7 kcal/mol, these phosphodiester groups also interact strongly in the ground state. To our knowledge, these results provide the first experimental evidence for electrostatic stabilization of a charged enzymatic transition state and intermediate using the anionic backbone of DNA.     

Ground-state, transition-state, and metal-cation effects of the 2-hydroxyl group on beta-D-galactopyranosyl transfer catalyzed by beta-galactosidase (Escherichia coli, lac Z)

Substitution of the C2-OH group by C2-H at 4-nitrophenyl-beta-d-galactopyranoside to give 4-nitrophenyl-2-deoxy-beta-d-galactopyranoside causes (1) a change in the rate-determining step for beta-galactosidase-catalyzed sugar hydrolysis from formation to breakdown of a covalent intermediate; (2) a 14 000-fold decrease in the second-order rate constant k(3)/K(d) for enzyme-catalyzed transfer of the beta-d-galactopyranosyl group from the substrate to form a covalent adduct to the enzyme; and (3) a larger 320 000-fold decrease in the first-order rate constant k(s) for hydrolysis of this covalent adduct. Only a small fraction (ca. 7%) of the 2-OH substituent effect is expressed in the ground-state Michaelis complex, so that the (apparent) strong interactions between the enzyme and 2-OH group that stabilize the transition state for beta-d-galactopyranosyl transfer only develop upon moving from the Michaelis complex to the transition state. Mg(2+) activates beta-galactosidase for cleavage of both 4-nitrophenyl-beta-d-galactopyranoside and 4-nitrophenyl-2-deoxy-beta-d-galactopyranoside. This suggests that Mg(2+) activation does not involve interactions with the 2-OH group. The removal of Mg(2+) from beta-galactosidase causes a change in the rate-determining step for enzyme-catalyzed hydrolysis of 4-nitrophenyl-2-deoxy-beta-d-galactopyranoside from breakdown to formation of the covalent intermediate. The observed 2-OH effect would require a very large (10-11 kcal/mol) stabilization of the transition state for beta-d-galactopyranosyl group transfer to water by interactions between beta-galactosidase and the neutral 2-OH group. We suggest that the apparent effect of the neutral substituent is more simply rationalized by ionization of the 2-OH to form a 2-O(-) anion, which provides effective electrostatic stabilization of the cationic transition state for glycoside cleavage at an active site of relatively low dielectric constant.     

Role of protein conformational dynamics in the catalysis by 6-hydroxymethyl-7,8-dihydropterin pyrophosphokinase

Enzymatic catalysis has conflicting structural requirements of the enzyme. In order for the enzyme to form a Michaelis complex, the enzyme must be in an open conformation so that the substrate can get into its active center. On the other hand, in order to maximize the stabilization of the transition state of the enzymatic reaction, the enzyme must be in a closed conformation to maximize its interactions with the transition state. The conflicting structural requirements can be resolved by a flexible active center that can sample both open and closed conformational states. For a bisubstrate enzyme, the Michaelis complex consists of two substrates in addition to the enzyme. The enzyme must remain flexible upon the binding of the first substrate so that the second substrate can get into the active center. The active center is fully assembled and stabilized only when both substrates bind to the enzyme. However, the side-chain positions of the catalytic residues in the Michaelis complex are still not optimally aligned for the stabilization of the transition state, which lasts only approximately 10(-13) s. The instantaneous and optimal alignment of catalytic groups for the transition state stabilization requires a dynamic enzyme, not an enzyme which undergoes a large scale of movements but an enzyme which permits at least a small scale of adjustment of catalytic group positions. This review will summarize the structure, catalytic mechanism, and dynamic properties of 6-hydroxymethyl-7,8-dihydropterin pyrophosphokinase and examine the role of protein conformational dynamics in the catalysis of a bisubstrate enzymatic reaction.     

Replacement of lysine 234 affects transition state stabilization in the active site of beta-lactamase TEM1

Lysine 234 is a residue highly conserved in all beta-lactamases, except in the carbenicillin-hydrolyzing enzymes, in which it is replaced by an arginine. Informational suppression has been used to create amino acid substitutions at this position in the broad spectrum Escherichia coli beta-lactamase TEM-1, in order to elucidate the role of this residue which lies on the wall at the closed end of the active site cavity. The mutants K234R and K234T were constructed and their kinetic constants measured. Replacement of lysine 234 by arginine yields an enzyme with similar activity toward cephalosporins and most penicillins, except toward the carboxypenicillins for which the presence of the guanidine group enhances the transition state binding. The removal of the basic group in the mutant K234T yields a protein variant which retains a low activity toward penicillins, but losts drastically its ability to hydrolyze cephalosporins. Moreover, these two mutations largely decreased the affinity of the enzyme for penicillins (10-fold for K234R and 50-fold for K234T). This can be correlated with the disruption of the predicted electrostatic binding between the C3 carboxylic group of penicillins and the amine function of the lysine. Therefore, lysine 234 in the E. coli beta-lactamase TEM-1 is involved both in the initial recognition of the substrate and in transition state stabilization.     

Electrostatic effects and binding determinants in the catalysis of prolyl oligopeptidase. Site specific mutagenesis at the oxyanion binding site

Prolyl oligopeptidase, a member of a new family of serine peptidases, plays an important role in memory disorders. Earlier x-ray crystallographic investigations indicated that stabilization of the tetrahedral transition state of the reaction involved hydrogen bond formation between the oxyanion of the tetrahedral intermediate and the OH group of Tyr(473). The contribution of the OH group was tested with the Y473F variant using various substrates. The charged succinyl-Gly-Pro-4-nitroanilide was hydrolyzed with a much lower k(cat)/K(m) compared with the neutral benzyloxycarbonyl-G1y-Pro-2-naphthylamide, although the binding modes of the two substrates were similar, as shown by x-ray crystallography. This suggested that electrostatic interactions between Arg(643) and the succinyl group competed with the productive binding mechanism. Unlike most enzyme reactions, catalysis by the wild-type enzyme exhibited positive activation entropy. In contrast, the activation entropy for the Y473F variant was negative, suggesting that the tyrosine OH group is involved in stabilizing both the transition state and the water shell at the active site. Importantly, Tyr(473) is also implicated in the formation of the enzyme-substrate complex. The nonlinear Arrhenius plot suggested a greater significance of the oxyanion binding site at physiological temperature. The results indicated that Tyr(473) was more needed at high pH, at high temperature, and with charged substrates exhibiting "internally competitive inhibition."     

pH Dependence of catalysis by Pseudomonas aeruginosa isochorismate-pyruvate lyase: implications for transition state stabilization and the role of lysine 42

An isochorismate-pyruvate lyase with adventitious chorismate mutase activity from Pseudomonas aerugionsa (PchB) achieves catalysis of both pericyclic reactions in part by the stabilization of reactive conformations and in part by electrostatic transition-state stabilization. When the active site loop Lys42 is mutated to histidine, the enzyme develops a pH dependence corresponding to a loss of catalytic power upon deprotonation of the histidine. Structural data indicate that the change is not due to changes in active site architecture, but due to the difference in charge at this key site. With loss of the positive charge on the K42H side chain at high pH, the enzyme retains lyase activity at ～100-fold lowered catalytic efficiency but loses detectable mutase activity. We propose that both substrate organization and electrostatic transition state stabilization contribute to catalysis. However, the dominant reaction path for catalysis is dependent on reaction conditions, which influence the electrostatic properties of the enzyme active site amino acid side chains.     

Binding Thermodynamics of the Transition State Analogue Coformycin and of the Ground State Analogue 1-Deazaadenosine to Bovine Adenosine Deaminase

Binding of the transition state analogue coformycin and the ground state analogue 1-deaazadenosine to bovine adenosine deaminase have been thermody-namically characterized. The heat capacity changes for coformycin and 1-deazaadenosine binding are - 4.7 × 0.8 kJ/mole-K and -1.2 × 0.1 kJ/mole-K, respectively. Since the predominant source of heat capacity change in enzyme interactions are changes in the extent of exposure of nonpolar amino acid side chains to the aqueous environment and the hydrophobic effect is the predominant factor in native structure stabilization, we propose that the binding of either class of ligand is associated with a stabilizing enzyme conformational change with coformycin producing the far greater effect Analysis of the T dependence of the second order rate constant for formation of the enzyme/coformycin complex further reveals that the conformational change is not rate limiting. We propose that the enzyme may facilitate catalysis via the formation of a stabilizing conformation at the reaction transition state.     

Identification of discriminator base atomic groups that modulate the alanine aminoacylation reaction

Specific aminoacylation of tRNAs involves activation of an amino acid with ATP followed by amino acid transfer to the tRNA. Previous work showed that the transfer of alanine from Escherichia coli alanyl-tRNA synthetase to a cognate RNA minihelix involves a transition state sensitive to changes in the tRNA acceptor stem. Specifically, the "discriminator" base at position 73 of minihelix(Ala) is a critical determinant of the transfer step of aminoacylation. This single-stranded nucleotide has previously been shown by solution NMR to be stacked predominantly onto G(1) of the first base pair of the alanine acceptor stem helix. In this work, RNA duplex(Ala) variants were prepared to investigate the role of specific discriminator base atomic groups in aminoacylation catalytic efficiency. Results indicate that the purine structure appears to be important for stabilization of the transition state and that major groove elements are more critical than those located in the minor groove. This result is in accordance with the predicted orientation of a class II synthetase at the end of the acceptor helix. In particular, substitution of the exocyclic amino group of A(73) with a keto-oxygen resulted in negative discrimination at this site. Taken together, these new results are consistent with the involvement of major groove atomic groups of the discriminator base in the formation of the transition state for the amino acid transfer step.     

The enhancement of electrostriction caused by lowering the solvent dielectric constant leads to the decrease of activation energy in trypsin catalysis.

The contribution of electrostriction of the solvent to the stabilization of the negatively charged tetrahedral transition state of a trypsin-catalyzed reaction was probed by means of kinetic studies involving high-pressure and solvent dielectric constant. A good correlation was observed between the increased catalytic efficiency of trypsin and the decreased solvent dielectric constant. When the dielectric constant of the solvents was lowered by 4.68 units, the loss of activation energy and that of free energy of activation were 2.26 kJ/mol and 3.09 kJ/mol, respectively. The activation volume for k(cat) decreased significantly as the dielectric constant of the solvent decreased, indicating that the degree of electrostriction of the solvent around the charged tetrahedral transition state has been enhanced. These observations demonstrate that the increase in the catalytic efficiency of the trypsin reaction with decreasing dielectric constant resulted from the stabilization of electrostatic energy for the formation of an oxyanion hole, and this stabilization was caused by the increase of electrostricted water around the charged tetrahedral transition state. Therefore, we conclude that control of the solvent dielectric constant can stabilize the tetrahedral transition state, and this lowers the activation energy.     

A conserved tyrosine residue of Saccharomyces cerevisiae leukotriene A4 hydrolase stabilizes the transition state of the peptidase activity

Saccharomyces cerevisiae leukotriene A4 hydrolase (LTA4H) is a bifunctional aminopeptidase/epoxide hydrolase and a member of the M1 family of metallopeptidases. In order to obtain a more thorough understanding of the aminopeptidase activity of the enzyme, two conserved tyrosine residues, Tyr244 and Tyr456, were altered to phenylalanine and the mutant proteins characterized by determining KM and kcat for various amino acid beta-naphthylamide substrates. While mutation of Tyr456 exhibited minimal effect on catalysis, mutation of Tyr244 caused an overall 25-100-fold reduction in catalytic activity for all substrates tested. Furthermore, LTA4H Y244F exhibited a 40-fold decrease in affinity for RB-3014, a transition state analog inhibitor, implicating Tyr244 in transition state stabilization.     

Arginine 127 stabilizes the transition state in carboxypeptidase

Crystallographic studies suggest that Arg-127 is a key amino acid in the hydrolysis of peptides and esters by carboxypeptidase A. The guanidinium group of Arg-127 is hypothesized to stabilize the oxyanion of the tetrahedral intermediate formed by the attack of water on the scissile carbonyl bond. We have replaced this amino acid in rat carboxypeptidase A1 with lysine (R127K), methionine (R127M), and alanine (R127A), in order to define the role of Arg-127 in carboxypeptidase catalyzed hydrolysis. The wild-type and mutant enzymes were expressed in yeast and purified. Kinetic studies show that Arg-127 substitution decreases kcat for both ester and amide substrates, whereas Km is relatively unchanged; for R127M and R127A this corresponds to a 6 kcal/mol decrease in transition state stabilization of the rate-limiting step. The binding affinity for the phosphonate transition state analog, Cbz-Phe-Ala(P)-OAla, was decreased by 5.4 kcal/mol, whereas binding affinity for the ground state inhibitor, DL-benzylsuccinic acid, was decreased by only 1.7 kcal/mol for R127M. Electrostatic calculations employing a finite difference solution to the Poisson-Boltzmann equation predict that the positive charge of Arg-127 should stabilize the transition state by 6-8 kcal/mol. Therefore, the experimental and theoretical data suggest that the primary role of Arg-127 is stabilization of the transition state through electrostatic interaction with the oxyanion.     

Influence of key residues on the reaction mechanism of the cAMP-dependent protein kinase

The reaction mechanism of the catalytic phosphoryl transfer of cAMP-dependent protein kinase (cAPK) was investigated by semi-empirical AM1 molecular orbital computations of an active site model system derived from the crystal structure of the catalytic subunit of the enzyme. The activation barrier is calculated as 20.7 kcal mol(-1) and the reaction itself to be exothermic by 12.2 kcal mol(-1). The active site residue Asp166, which was often proposed to act as a catalytic base, does not accept a proton in any of the reaction steps. Instead, the hydroxyl hydrogen of serine is shifted to the simultaneously transferred phosphate group of ATP. Although the calculated transition state geometry indicates an associative phosphoryl transfer, no concentration of negative charge is found. To study the influence of protein mutations on the reaction mechanism, we compared two-dimensional energy hypersurfaces of the protein kinase wild-type model and a corresponding mutant in which Asp166 was replaced by alanine. Surprisingly, they show similar energy profiles despite the experimentally known decrease of catalytic activity for corresponding mutants. Furthermore, a model structure was examined, where the charged NH3 group of Lys168 was replaced by a neutral methyl group. The energetic hypersurface of this hypothetical mutant shows two possible pathways for phosphoryl transfer, which both require significantly higher activation energies than the other systems investigated, while the energetic stabilization of the reaction product is similar in all systems. As the position of the amino acid side chains and the substrate peptide is virtually unchanged in all model systems, our results suggest that the exchange of Asp166 by other amino acid is less important to the phosphoryl transfer itself, but crucial to maintain the configuration of the active site in vivo. The positively charged side chain of Lys168, however, is necessary to stabilize the intermediate reaction states, particularly the side chain of the substrate peptide.     

Insight into the phosphodiesterase mechanism from combined QM/MM free energy simulations

Molecular dynamics simulations employing a combined quantum mechanical and molecular mechanical potential have been carried out to elucidate the reaction mechanism of the hydrolysis of a cyclic nucleotide cAMP substrate by phosphodiesterase 4B (PDE4B). PDE4B is a member of the PDE superfamily of enzymes that play crucial roles in cellular signal transduction. We have determined a two-dimensional potential of mean force (PMF) for the coupled phosphoryl bond cleavage and proton transfer through a general acid catalysis mechanism in PDE4B. The results indicate that the ring-opening process takes place through an S(N)2 reaction mechanism, followed by a proton transfer to stabilize the leaving group. The computed free energy of activation for the PDE4B-catalyzed cAMP hydrolysis is about 13 kcal·mol(-1) and an overall reaction free energy is about -17 kcal·mol(-1), both in accord with experimental results. In comparison with the uncatalyzed reaction in water, the enzyme PDE4B provides a strong stabilization of the transition state, lowering the free energy barrier by 14 kcal·mol(-1). We found that the proton transfer from the general acid residue His234 to the O3' oxyanion of the ribosyl leaving group lags behind the nucleophilic attack, resulting in a shallow minimum on the free energy surface. A key contributing factor to transition state stabilization is the elongation of the distance between the divalent metal ions Zn(2+) and Mg(2+) in the active site as the reaction proceeds from the Michaelis complex to the transition state.     

The enhancement of electrostriction caused by lowering the solvent dielectric constant leads to the decrease of activation energy in trypsin catalysis

The contribution of electrostriction of the solvent to the stabilization of the negatively charged tetrahedral transition state of a trypsin-catalyzed reaction was probed by means of kinetic studies involving high-pressure and solvent dielectric constant. A good correlation was observed between the increased catalytic efficiency of trypsin and the decreased solvent dielectric constant. When the dielectric constant of the solvents was lowered by 4.68 units, the loss of activation energy and that of free energy of activation were 2.26 kJ/mol and 3.09 kJ/mol, respectively. The activation volume for k_cat decreased significantly as the dielectric constant of the solvent decreased, indicating that the degree of electrostriction of the solvent around the charged tetrahedral transition state has been enhanced. These observations demonstrate that the increase in the catalytic efficiency of the trypsin reaction with decreasing dielectric constant resulted from the stabilization of electrostatic energy for the formation of an oxyanion hole, and this stabilization was caused by the increase of electrostricted water around the charged tetrahedral transition state. Therefore, we conclude that control of the solvent dielectric constant can stabilize the tetrahedral transition state, and this lowers the activation energy.     

A common active site model for catalysis by chorismate mutase--prephenate dehydrogenase.

Comparison of the calculated structures for the transition states of the two reactions catalysed by chorismate mutase prephenate dehydrogenase suggests that both reactions could be catalysed at a common active site. Kinetic data for the enzyme from Aerobacteraerogenes are consistent with this possibility. On the basis of these theoretical and experimental data a model for a common active site is developed. In the model, the transition state for each reaction is bound to the enzyme via both of the two substrate carboxyl groups, and can also interact with the coenzyme nicotinamide adenine dinucleotide through a hydrogen bond between the amide moiety of the nicotinamide ring and the hydroxyl group of the substrate. Chorismate, prephenate and 4-hydroxyphenylpyruvate in their ground states form the same hydrogen bond to the coenzyme, but are bound to the enzyme via a single carboxyl group only. The additional bond formed between the enzyme and the transition state structures thus provides the transition state stabilization required for catalysis of both reactions.     

Studies on the mechanism of crown-ether-induced activation of enzymes in non-aqueous media.

Studies on the mechanism of crown-ether-induced activation are described in this paper. Michaelis Menten kinetics of -chymotrypsin in toluene in the presence and absence of 18-crown-6 showed that only V_max is increased upon crown ether treatment. Parallel Lineweaver–Burk plots indicate that crown ethers do not activate the enzyme by specific interactions in the active site, such as transition state stabilization or facilitated transport of water molecules. Increased V_max values of crown-ether-treated enzyme most probably originate from conformational changes, which alter k_cat as well as the amount of catalytically active enzyme.     

On the role of the N-terminal group in the allosteric function of glucosamine-6-phosphate deaminase from Escherichia coli

Glucosamine-6-phosphate deaminase (EC 3.5.99.6) from Escherichia coli is an allosteric enzyme of the K-type, activated by N-acetylglucosamine 6-phosphate. It is a homohexamer and has six allosteric sites located in clefts between the subunits. The amino acid side-chains in the allosteric site involved in phosphate binding are Arg158, Lys160 and Ser151 from one subunit and the N-terminal amino group from the facing polypeptide chain. To study the functional role of the terminal amino group, we utilized a specific non-enzymic transamination reaction, and we further reduced the product with borohydride, to obtain the corresponding enzyme with a terminal hydroxy group. Several experimental controls were performed to assess the procedure, including reconditioning of the enzyme samples by refolding chromatography. Allosteric activation by N-acetylglucosamine 6-phosphate became of the K-V mixed type in the transaminated protein. Its kinetic study suggests that the allosteric equilibrium for this modified enzyme is displaced to the R state, with the consequent loss of co-operativity. The deaminase with a terminal hydroxy acid, obtained by reducing the transaminated enzyme, showed significant recovery of the catalytic activity and its allosteric activation pattern became similar to that found for the unmodified enzyme. It had lost, however, the pH-dependence of homotropic co-operativity shown by the unmodified deaminase in the pH range 6-8. These results show that the terminal amino group plays a part in the co-operativity of the enzyme and, more importantly, indicate that the loss of this co- operativity at low pH is due to the hydronation of this amino group.     

Arginine coordination in enzymatic phosphoryl transfer: evaluation of the effect of Arg166 mutations in Escherichia coli alkaline phosphatase

Arginine residues are commonly found in the active sites of enzymes catalyzing phosphoryl transfer reactions. Numerous site-directed mutagenesis experiments establish the importance of these residues for efficient catalysis, but their role in catalysis is not clear. To examine the role of arginine residues in the phosphoryl transfer reaction, we have measured the consequences of mutations to arginine 166 in Escherichia coli alkaline phosphatase on hydrolysis of ethyl phosphate, on individual reaction steps in the hydrolysis of the covalent enzyme-phosphoryl intermediate, and on thio substitution effects. The results show that the role of the arginine side chain extends beyond its positive charge, as the Arg166Lys mutant is as compromised in activity as Arg166Ser. Through measurement of individual reaction steps, we construct a free energy profile for the hydrolysis of the enzyme-phosphate intermediate. This analysis indicates that the arginine side chain strengthens binding by approximately 3 kcal/mol and provides an additional 1-2 kcal/mol stabilization of the chemical transition state. A 2.1 A X-ray diffraction structure of Arg166Ser AP is presented, which shows little difference in enzyme structure compared to the wild-type enzyme but shows a significant reorientation of the bound phosphate. Altogether, these results support a model in which the arginine contributes to catalysis through binding interactions and through additional transition state stabilization that may arise from complementarity of the guanidinum group to the geometry of the trigonal bipyramidal transition state.     

Correlating amino acid conservation with function in tyrosyl-tRNA synthetase

Sequence comparisons have been combined with mutational and kinetic analyses to elucidate how the catalytic mechanism of Bacillus stearothermophilus tyrosyl-tRNA synthetase evolved. Catalysis of tRNA(Tyr) aminoacylation by tyrosyl-tRNA synthetase involves two steps: activation of the tyrosine substrate by ATP to form an enzyme-bound tyrosyl-adenylate intermediate, and transfer of tyrosine from the tyrosyl-adenylate intermediate to tRNA(Tyr). Previous investigations indicate that the class I conserved KMSKS motif is involved in only the first step of the reaction (i.e. tyrosine activation). Here, we demonstrate that the class I conserved HIGH motif also is involved only in the tyrosine activation step. In contrast, one amino acid that is conserved in a subset of the class I aminoacyl-tRNA synthetases, Thr40, and two amino acids that are present only in tyrosyl-tRNA synthetases, Lys82 and Arg86, stabilize the transition states for both steps of the tRNA aminoacylation reaction. These results imply that stabilization of the transition state for the first step of the reaction by the class I aminoacyl-tRNA synthetases preceded stabilization of the transition state for the second step of the reaction. This is consistent with the hypothesis that the ability of aminoacyl-tRNA synthetases to catalyze the activation of amino acids with ATP preceded their ability to catalyze attachment of the amino acid to the 3' end of tRNA. We propose that the primordial aminoacyl-tRNA synthetases replaced a ribozyme whose function was to promote the reaction of amino acids and other small molecules with ATP.     

Transition state stabilization by the N-terminal anticodon-binding domain of lysyl-tRNA synthetase

Lysyl-tRNA synthetase from Bacillus stearothermophilus (B.s. LysRS) (EC ) catalyzes aminoacylation of tRNA(Lys) with l-lysine, in which l-lysine was first activated with ATP to yield an enzyme (lysyladenylate complex), and then the lysine molecule was transferred from the complex to tRNA(Lys). B.s. LysRS is a homodimeric enzyme with a subunit that consists of two domains, an N-terminal tRNA anticodon-binding domain (TAB-ND: Ser(1)-Pro(144)) and a C-terminal Class II-specific catalytic domain (CAT-CD: Lys(151)-Lys(493)). CAT-CD alone retained catalytic activity, although at a low level; TAB-ND alone showed no activity. Size exclusion chromatography revealed that CAT-CD exists as a dimer, whereas TAB-ND was a monomer. The formation of a complex consisting of these domains was detected with the guidance of surface plasmon resonance. In accordance with this, the addition of TAB-ND to CAT-CD significantly enhanced both the l-lysine activation and the tRNA aminoacylation reactions. Kinetic analysis showed that deletion of TAB-ND resulted in a significant destabilization of the transition state of CAT-CD in the l-lysine activation reaction but had little effect on the ground state of substrate binding. A significant role of a cross-subunit interaction in the enzyme between TAB-ND and CAT-CD was proposed for the stabilization of the transition state in the l-lysine activation reaction.