The Accumulation of P-Element-Induced Recombinants in the Germline of Male Drosophila Melanogaster

P-element-induced recombination in Drosophila melanogaster occurs premeiotically. Recombinants are therefore expected to accumulate in the stem cells of the germline of P-element-carrying males. We show that both the recombination frequency and the incidence of ``clustering' increase with the age of males carrying various P-element derivatives. The combination of end-deleted elements can lead to average recombination frequencies >50% with individual instances of 100% recombination. These elements also lowered the fertility of the carriers. We investigated these features by constructing an analytical and a computer simulation model of the course of events in the germline, incorporating the recently proposed hybrid element insertion (HEI) model of P-element activity. The model is able to predict extreme recombination levels, segregation ratio biases and lowered fertility through cell death in a single analysis.     

Flanking Duplications and Deletions Associated with P-Induced Male Recombination in Drosophila

We studied P element-induced recombination in germline mitotic cells by examining the structure of the recombinant chromosomes. We found that most recombinants retain a mobile P element at the site of the recombination, usually with either a deletion or a duplication immediately adjacent to the P end at which the crossover occurred. The sizes of these deletions and duplications ranged from a few base pairs to well over 100 kb. These structures fit the ``hybrid element insertion' (HEI) model of male recombination in which the two P-element copies on sister chromatids combine to form a ``hybrid element' whose termini insert into a nearby position on the homologue. The data suggest that P-induced recombination can be used as an efficient means of generating flanking deletions in the vicinity of existing P elements. These deletions are easily screened using distant flanking markers, and they can be chosen to extend in a given direction depending on which reciprocal recombinant type is selected. Furthermore, the retention of a mobile P element allows one to extend the deletion or generate additional variability at the site by subsequent rounds of recombination.     

Evidence of P-element-induced sister-chromatid exchange in a ring-X chromosome in Drosophila, with implication for a high rate of formation of hybrid elements

Activation of a single incomplete P element induces recombination at a rate of approximately 0.5-1% in the male germline of Drosophila. Male recombination rises by an order of magnitude to approximately 20% if homologous P elements are involved. The high rate of recombination suggests the possibility that sister-chromatid exchange (SCE) might be elevated to a similar extent, since homologous P elements must always be present in sister chromatids. This possibility was tested by recombining a single P element onto a ring-X chromosome and using sex-ratio distortion to measure the loss of the ring-X due to SCE in the male germline. The results confirmed a rate of loss comparable to that expected with homologous elements, although the rate of loss was variable. Both SCE and recombination results are consistent with the "hybrid element insertion" model, in which the left and right ends from different elements associate, providing that insertion occurs preferentially in the vicinity of a P-element end. For autosomes, hybrid element formation may thus occur at a much higher rate than the 0.5-1% implied by single element recombination, with only a small minority of hybrid element excision events being resolved by recombination.     

Testing the palindromic target site model for DNA transposon insertion using the Drosophila melanogaster P-element

Understanding the molecular mechanisms that influence transposable element target site preferences is a fundamental challenge in functional and evolutionary genomics. Large-scale transposon insertion projects provide excellent material to study target site preferences in the absence of confounding effects of post-insertion evolutionary change. Growing evidence from a wide variety of prokaryotes and eukaryotes indicates that DNA transposons recognize staggered-cut palindromic target site motifs (TSMs). Here, we use over 10 000 accurately mapped P-element insertions in the Drosophila melanogaster genome to test predictions of the staggered-cut palindromic target site model for DNA transposon insertion. We provide evidence that the P-element targets a 14-bp palindromic motif that can be identified at the primary sequence level, which predicts the local spacing, hotspots and strand orientation of P-element insertions. Intriguingly, we find that the although P-element destroys the complete 14-bp target site upon insertion, the terminal three nucleotides of the P-element inverted repeats complement and restore the original TSM, suggesting a mechanistic link between transposon target sites and their terminal inverted repeats. Finally, we discuss how the staggered-cut palindromic target site model can be used to assess the accuracy of genome mappings for annotated P-element insertions.     

Chromosome interactions in P-M dysgenic male recombination of Drosophila melanogaster.

The frequency, distribution and structure of P elements on the second and third chromosomes of Texas 1, a wild-type inbred strain of Drosophila melanogaster, were investigated by in situ hybridization. These autosomes were isolated individually and used as P-element donors to study the frequency and distribution of male recombination events generated on recipient chromosomes which were originally devoid of P sequences. The P-element array of chromosome 2 was shown to generate higher male recombination frequencies on chromosome 3 than vice versa, despite having fewer P factors and fewer P elements in general. This is likely to be due to the presence and distribution of specific P-deletion derivatives, which vary in their ability to repress P mobility. The male recombination generated on recipient chromosomes is associated with the insertion of donated P sequences, but only in a small minority of cases could a novel P-element site be detected at, or near, the recombination breakpoint. The majority of such breakpoints appear to be associated either with unsuccessful P insertion, or with the action of P transposase attracted by P elements newly inserted elsewhere on the recipient chromosome. Recent evidence also suggests that a small proportion of the breakpoints may be associated with the action of P transposase alone. Male recombination breakpoints appear to be distributed effectively at random along the recipient autosomes, and their frequency of occurrence was shown to correlate with the physical length of DNA available between markers, as revealed by the polytene map distance.     

Site-specific insertion of genes into integrons: role of the 59-base element and determination of the recombination cross-over point

From examination of published DNA sequences of genes found inserted at a specific site in integrons, all genes are shown to be associated, at their 3' ends, with a short imperfect inverted repeat sequence, a 59-base element or relative of this element. The similarity of the arrangement of gene inserts in the integron and in the Tn7 transposon family is described. A refined consensus for the 59-base element is reported. Members of this family are highly diverged and the relationship of a group of longer elements to the 59-base elements is demonstrated. The ability of 59-base elements of different length and sequence to act as sites for recombination catalysed by the integron-encoded DNA integrase is demonstrated, confirming that elements of this family have a common function. The ability of elements located between gene pairs to act as recombination sites has also been demonstrated. The recombination cross-over point has been localized to the GTT triplet which is conserved in the core sites, GTTRRRY, found at the 3' end of 59-base elements. Recombination at the core site found in inverse orientation at the 5' end of the 59-base elements was not detected, and the sequences responsible for orientation of the recombination event appear to reside within the 59-base element. A model for site-specific insertion of genes into integrons and Tn7-like transposons is proposed. Circular units consisting of a gene associated with a 59-base element are inserted into an ancestral element which contains neither a gene nor a 59-base element.(ABSTRACT TRUNCATED AT 250 WORDS)     

Protected P-Element Termini Suggest a Role for Inverted-Repeat-Binding Protein in Transposase-Induced Gap Repair in Drosophila Melanogaster

P-element transposition is thought to occur by a cut-and-paste mechanism that generates a double-strand break at the donor site, the repair of which can lead to internally deleted elements. We have generated a series of both phenotypically stronger and weaker allelic derivatives of vg(21), a vestigial mutant caused by a P-element insertion in the 5' region of the gene. Virtually all of the new alleles arose by internal deletion of the parental element in vg(21), and we have characterized a number of these internally deleted P elements. Depending upon the selection scheme used, we see a very different spectrum of amount and source of P-element sequences in the resultant derivatives. Strikingly, most of the breakpoints occur within the inverted-repeats such that the last 15-17 bp of the termini are retained. This sequence is known to bind the inverted-repeat-binding protein (IRBP). We propose that the IRBP may act to preserve the P-element ends when transposition produces a double-strand gap. This allows the terminus to serve as a template upon which DNA synthesis can act to repair the gap. Filler sequences found at the breakpoints of the internally deleted P elements resemble short stretches, often in tandem arrays, of these terminal sequences. The structure of the filler sequences suggests replication slippage may occur during the process of gap repair.     

Local Transposition of P Elements in Drosophila Melanogaster and Recombination between Duplicated Elements Using a Site-Specific Recombinase

The transposase source Δ2-3(99B) was used to mobilize a P element located at sites on chromosomes X, 2 and 3. The transposition event most frequently recovered was a chromosome with two copies of the P element at or near the original site of insertion. These were easily recognized because the P element carried a hypomorphic while gene with a dosage dependent phenotype; flies with two copies of the gene have darker eyes than flies with one copy. The P element also carried direct repeats of the recombination target (FRT) for the FLP site-specific recombinase. The synthesis of FLP in these flies caused excision of the FRT-flanked white gene. Because the two white copies excised independently, patches of eye tissue with different levels of pigmentation were produced. Thus, the presence of two copies of the FRT-flanked white gene could be verified. When the P elements lay in the same orientation, FLP-mediated recombination between the FRTs on separated elements produced deficiencies and duplications of the flanked region. When P elements were inverted, the predominant consequence of FLP-catalyzed recombination between the inverted elements was the formation of dicentric chromosomes and acentric fragments as a result of unequal sister chromatid exchange.     

Construction and characterization of deletions with defined end points in Drosophila using P elements in trans

We used P-element transposase-mediated "male recombination" between two P elements in trans to create genetic deletions that removed a number of loci, including the gene encoding the neuropeptide crustacean cardioactive peptide (CCAP). Two classes of recombinant chromosomes were produced. Approximately one-quarter were viable when homozygous or hemizygous, whereas the remaining lines caused homozygous and hemizygous lethality. Preliminary analyses using PCR and CCAP immunohistochemistry suggested that, whereas the DNA of the viable lines was largely intact, most lethal lines contained chromosomal deletions that were roughly bounded by the insertion sites of the two P elements used. Southern blot analyses of select lethal lines showed that the DNA flanking the deletion was indeed grossly intact whereas the intervening DNA could not be detected. Sequencing across the deletion in three of these lethal lines identified a single line bearing intact genomic DNA on either side of the deletion separated by 30 bp of P-element DNA. The method described here suggests a simple procedure for creating deletions with defined end points. Importantly, it can use preexisting P-element insertion strains and does not rely on the use of transposable elements that are engineered to cause specific DNA rearrangements.     

P-Element-Induced Male Recombination Can Be Produced in Drosophila Melanogaster by Combining End-Deficient Elements in Trans

Male recombination, not normally present in Drosophila melanogaster, can be produced at high rates when target P elements at homologous sites are combined in the presence of transposase protein. We have produced a set of elements by in situ deletion of a particular insertion and have found elements that have deletions stretching into either end. Elements were tested in pairs to see whether they complement each other in their ability to induce recombination. The combination of elements that are deficient for the same end produces very little recombination, but the combination of a right-end and a left-end element can generate recombination values higher than given by two complete P[CaSpeR] elements at homologous sites. This strongly suggests that ``hybrid' P elements, containing ends from two different elements, can be recognized by transposase protein. We have also examined genotypes containing a normal and an end-deficient element and found that they yield reasonably high levels of recombination. We interpret the resultant gametes from such genotypes as showing that the majority of events in this genotype derive from the association of complementary ends from the same element, whereas the complementary ends from elements in trans associate in only a minority of cases.     

New transposable elements identified as insertions in rice transposon Tnr1

Tnr1 (235 bp long) is a transposable element in rice. Polymerase chain reactions (PCRs) done with a primer(s) that hybridizes to terminal inverted repeat sequences (TIRs) of Tnr1 detected new Tnr1 members with one or two insertions in rice genomes. Six identified insertion sequences (Tnr4, Tnr5, Tnr11, Tnr12, Tnr13 and RIRE9) did not have extensive homology to known transposable elements, rather they had structural features characteristic of transposable elements. Tnr4 (1767 bp long) had imperfect 64-bp TIRs and appeared to generate duplication of a 9-bp sequence at the target site. However, the TIR sequences were not homologous to those of known transposable elements, indicative that Tnr4 is a new transposable element. Tnr5 (209 bp long) had imperfect 46-bp TIRs and appeared to generate duplication of sequence TTA like that of some elements of the Tourist family. Tnr11 (811 bp long) had 73-bp TIRs with significant homology to those of Tnr1 and Stowaway and appeared to generate duplication of sequence TA, indicative that Tnr11 is a transposable element of the Tnr1/Stowaway family. Tnr12 (2426 bp long) carried perfect 9-bp TIRs, which began with 5'-CACTA- -3' from both ends and appeared to generate duplication of a 3-bp target sequence, indicative that Tnr12 is a transposable element of the En/Spm family. Tnr13 (347 bp long) had 31-bp TIRs and appeared to generate duplication of an 8-bp target sequence. Two sequences, one the transposon-like element Crackle, had partial homology in the Tnr13 ends. All five insertions appear to be defective elements derived from autonomous ones encoding the transposase gene. All had characteristic tandem repeat sequences which may be recognized by transposase. The sixth insertion sequence, named RIRE9 (3852 bp long), which begins with 5'-TG- -3' and ends with 5'- -CA-3', appeared to generate duplication of a 5-bp target sequence. These and other structural features indicate that this insertion is a solo LTR (long terminal repeat) of a retrotransposon. The transposable elements described above could be identified as insertions into Tnr1, which do not deleteriously affect the growth of rice cells.     

The Bacteroides mobilizable transposon Tn4555 integrates by a site-specific recombination mechanism similar to that of the gram-positive bacterial element Tn916.

The Bacteroides mobilizable transposon Tn4555 is a 12.2-kb molecule that encodes resistance to cefoxitin. Conjugal transposition is hypothesized to occur via a circular intermediate and is stimulated by coresident tetracycline resistance elements and low levels of tetracycline. In this work, the ends of the transposon were identified and found to consist of 12-bp imperfect inverted repeats, with an extra base at one end. In the circular form, the ends were separated by a 6-bp "coupling sequence" which was associated with either the left or the right transposon terminus when the transposon was inserted into the chromosome. Tn4555 does not duplicate its target site upon insertion. Using a conjugation-based transposition assay, we showed that the coupling sequence originated from 6 bases of genomic DNA flanking either side of the transposon prior to excision. Tn4555 preferentially transposed into a 589-bp genomic locus containing a 207-bp direct repeat. Integration occurred before or after the repeated sequence, with one integration site between the two repeats. These observations are consistent with a transposition model based on site-specific recombination. In the bacteriophage lambda model for site-specific recombination, the bacteriophage recombines with the Escherichia coli chromosome via a 7-bp "crossover" region. We propose that the coupling sequence of Tn4555 is analogous in function to the crossover region of lambda but that unlike the situation in lambda, recombination occurs between regions of nonhomologous DNA. This ability to recombine into divergent target sites is also a feature of the gram-positive bacterial transposon Tn916.     

Splinkerette PCR for Mapping Transposable Elements in Drosophila

Transposable elements (such as the P-element and piggyBac) have been used to introduce thousands of transgenic constructs into the Drosophila genome. These transgenic constructs serve many roles, from assaying gene/cell function, to controlling chromosome arm rearrangement. Knowing the precise genomic insertion site for the transposable element is often desired. This enables identification of genomic enhancer regions trapped by an enhancer trap, identification of the gene mutated by a transposon insertion, or simplifying recombination experiments. The most commonly used transgene mapping method is inverse PCR (iPCR). Although usually effective, limitations with iPCR hinder its ability to isolate flanking genomic DNA in complex genomic loci, such as those that contain natural transposons. Here we report the adaptation of the splinkerette PCR (spPCR) method for the isolation of flanking genomic DNA of any P-element or piggyBac. We report a simple and detailed protocol for spPCR. We use spPCR to 1) map a GAL4 enhancer trap located inside a natural transposon, pinpointing a master regulatory region for olfactory neuron expression in the brain; and 2) map all commonly used centromeric FRT insertion sites. The ease, efficiency, and efficacy of spPCR could make it a favored choice for the mapping of transposable element in Drosophila.     

Three-partner conversion induced by the P-element transposase in <Emphasis Type="Italic">Drosophila melanogaster</Emphasis>

Conversion of one P-derived transposon into another has already been shown to occur with a measurable frequency. However, the mechanism responsible for such replacements has remained controversial. We previously proposed a mechanism involving three partners. We assumed that after excision of the P-element inserted at the target site, the double-strand break was repaired using, first, the homologous P sequences on the sister chromatid, and second, a remote template, the donor P-derived transposon. However, two other mechanisms have been proposed. The first involves two partners only, the broken end and the remote template, while the second involves transposition of the donor into the target P-element, followed by a double recombination event. Here we describe the conversion of a defective P-element using as a remote template an enhancer-trap element that is itself unable to transpose because it lacks 21?bp at its 5′ end. This result makes it possible to exclude the possibility that this conversion event occurred after transposition. The new allele was molecularly and genetically characterized. The occurrence of a polymorphism at position 33 of the P-element sequence and of an imperfect copy of the template on the 3′ side of the converted transposon confirmed that the sister chromatid was absolutely necessary as a partner for repair. Our results show that targeting of a marked P-element is possible, even when this element is unable to transpose. This provides a means of improving recovery of conversion events by eliminating unwanted transpositions catalyzed by the P transposase.     

Three-partner conversion induced by the P-element transposase in Drosophila melanogaster

Conversion of one P-derived transposon into another has already been shown to occur with a measurable frequency. However, the mechanism responsible for such replacements has remained controversial. We previously proposed a mechanism involving three partners. We assumed that after excision of the P-element inserted at the target site, the double-strand break was repaired using, first, the homologous P sequences on the sister chromatid, and second, a remote template, the donor P-derived transposon. However, two other mechanisms have been proposed. The first involves two partners only, the broken end and the remote template, while the second involves transposition of the donor into the target P-element, followed by a double recombination event. Here we describe the conversion of a defective P-element using as a remote template an enhancer-trap element that is itself unable to transpose because it lacks 21 bp at its 5' end. This result makes it possible to exclude the possibility that this conversion event occurred after transposition. The new allele was molecularly and genetically characterized. The occurrence of a polymorphism at position 33 of the P-element sequence and of an imperfect copy of the template on the 3' side of the converted transposon confirmed that the sister chromatid was absolutely necessary as a partner for repair. Our results show that targeting of a marked P-element is possible, even when this element is unable to transpose. This provides a means of improving recovery of conversion events by eliminating unwanted transpositions catalyzed by the P transposase.     

Insertion and excision of Bacteroides conjugative chromosomal elements.

Many strains of Bacteroides harbor large chromosomal elements that can transfer themselves from the chromosome of the donor to the chromosome of the recipient. Most of them carry a tetracycline resistance (Tcr) gene and have thus been designated Tcr elements. In the present study, we have used transverse alternating field electrophoresis to show that all but one of the Tcr elements screened were approximately 70 to 80 kbp in size. The exception (Tcr Emr 12256) was 150 to 200 kbp in size and may be a hybrid element. All of the Tcr elements inserted in more than one site, but insertion was not random. The Tcr elements sometimes cotransfer unlinked chromosomal segments, or nonreplicating Bacteroides units (NBUs). Transverse alternating field electrophoresis analysis showed that insertion of NBUs was not random and that the NBUs did not insert near the Tcr element. Although attempts to clone one or both ends of a Tcr element have not been successful, ends of a cryptic element (XBU4422) were cloned previously and shown to be homologous to the ends of Tcr elements. We have obtained DNA sequences of junction regions between XBU4422 and its target from several different insertions. Comparison of junction sequences with target sequences showed that no target site duplication occurred during insertion and that XBU4422 carried 4 to 5 bp of adjacent chromosomal DNA when it excised from the chromosome and inserted in a plasmid. We identified a short region of sequence similarity between one of the ends of XBU4422 and its target site that may be important for insertion. This sequence contained an 8-bp segment that was identical to the recombinational hot spot sequence on Tn21. XBU4422 could exise itself from plasmids into which it inserted. In most cases, the excision left a single additional A behind in the target site, but precise excision was seen in one case.     

Structure and function of 59-base element recombination sites associated with mobile gene cassettes

The integration of gene cassettes into integrons is effected by site-specific recombination catalysed by an integrase, IntI, encoded by the integron. The cassette-associated recombination sites, 59-base elements, are not highly conserved and vary in length from 57 to 141 bp. They can be identified by their location and the relationship of over 20 bp at their outer ends to consensus sequences that are imperfect inverted repeats of one another. The recombination cross-over occurs close to one end of the 59-base element, within a conserved core site with the consensus sequence GTTAGGC or GTTRRRY. By introducing single-base changes at each of these positions in the aadB 59-base element, bases that are critical for site activity were identified. The recombination cross-over was also localized to a unique position between the adjacent G and T residues. Changes introduced in the conserved AAC of the inverse core site (GCCTAAC or RYYYAAC) located at the opposite end of the 59-base element also reduced site activity but to a lesser extent. Sequences of rare recombinants revealed an alternative position for strand exchange and led to the conclusion that 59-base elements comprise two simple sites, analogous to those recognized by other integrases, with each simple site made up of a pair of inversely oriented IntI binding domains separated by a spacer of 7 or 8 bp. Re-examination of the sequences of all known 59-base elements revealed that this simple site configuration was present at both the left and right ends in all 59-base elements. The identity of bases in the spacer is not required for efficient recombination and the cross-over is located at one end of the spacer, suggesting that during IntI1-mediated recombination only one strand exchange occurs.     

Sequence analysis of the insertion element ISH1.8 and of associated structural changes in the genome of phage PhiH of the archaebacterium Halobacterium halobium

We have sequenced the insertion element ISH1.8 which can be present in one or two copies in the genome of phage ΦH of Halobacterium halobium. ISH1.8 is 1895 bp long, has no inverted repeat at its ends, and one only of the two copies is flanked by two 5-bp duplications. An 8-bp sequence composed of 4 bp from each end of ISH1.8 is present in both sites lacking the element. This 8-bp sequence could either be a specific insertion sequence or a part of the element that is left behind upon deletion. The plasmid pΦHL, consisting of the invertible L segment of the phage genome which is, in ΦH2 and ΦH5, flanked by two copies of ISH1.8, contains 112 bp of ISH1.8 and is released from the phage genome by recombination within a direct repeat of 9 bp. This 9-bp sequence (TCCCGCCCT) exists as an inverted repeat in ISH1.8 and therefore as two distinct repeats in phage genomes containing two copies of ISH1.8 in inverted orientation.