The two modes of binding of Ru(phen)(2)dppz(2+) to DNA: thermodynamic evidence and kinetic studies

The binding of Ru(phen)(2)dppz(2+) (dppz=dipyrido[3,2-a:2',3'-c]phenazine) to DNA was investigated at pH 7.0 and 25 degrees C using stopped-flow and spectrophotometric methods. Equilibrium measurements show that two modes of binding, whose characteristics depend on the polymer to dye ratio (C(P)/C(D)), are operative. The binding mode occurring for values of C(P)/C(D) higher than 3 exhibits positive cooperativity, which is confirmed by kinetic experiments. The reaction parameters are K=2 x 10(3)M(-1), omega=550, n=1, k(r)=(1.9+/-0.5) x 10(7)M(-1)s(-1) and k(d)=(9.5+/-2.5)x10(3)s(-1) at I=0.012 M. The results are discussed in terms of prevailing surface interaction with DNA grooves accompanied by partial intercalation of the dppz residue. The other binding mode becomes operative for C(P)/C(D)<3 and the equilibria analysis shows this is an ordinary intercalation mode (K=1.3 x 10(6) M(-1), n=1.5 at I=0.012 M and K=2 x 10(5) M(-1), n=1.2 at I=0.21 M). Similar behaviour is displayed by double-stranded poly(A).     

Oxidation of L-serine and L-threonine by bis(hydrogen periodato)argentate(III) complex anion: a mechanistic study

Oxidation of l-serine and l-threonine by a silver(III) complex anion, [Ag(HIO(6))(2)](5-), has been studied in aqueous alkaline medium. The oxidation products of the amino acids have been identified as ammonia, glyoxylic acid and aldehyde (formaldehyde for serine and acetaldehyde for threonine). Kinetics of the oxidation reactions has been followed by the conventional spectrophotometry in the temperature range of 20.0-35.0 degrees C and the reactions display an overall second-order behavior: first-order with respect to both Ag(III) and the amino acids. Analysis of influences of [OH(-)] and [periodate] on the second-order rate constants k' reveals an empirical rate expression: k(')=(k(a)+k(b)[OH(-)])K(1)/([H(2)IO(6)(3-)](e)+K(1)), where [H(2)IO(6)(3-)](e) is equilibrium concentration of periodate, and where k(a)=6.1+/-0.5M(-1)s(-1), k(b)=264+/-6M(-2)s(-1), and K(1)=(6.5+/-1.3)x10(-4)M for serine and k(a)=12.6+/-1.7M(-1)s(-1), k(b)=(5.5+/-0.2)x10(2)M(-2)s(-1), and K(1)=(6.2+/-1.5)x10(-4)M for threonine at 25.0 degrees C and ionic strength of 0.30M. Activation parameters associated with k(a) and k(b) have also been derived. A reaction mechanism is proposed to involve two pre-equilibria, leading to formation of an Ag(III)-periodato-amino acid ternary complex. The ternary complex undergoes a two-electron transfer from the coordinated amino acid to the metal center via two parallel pathways: one pathway is spontaneous and the other is assisted by a hydroxide ion. Potential applications of the Ag(III) complex as a reagent for modifications of peptides and proteins are implicated.     

Kinetics and mechanism of the reduction of CrVI and CrV by D-lactobionic acid

The oxidation of D-lactobionic acid by Cr(VI) yields the 2-ketoaldobionic acid and Cr(3+) as final products when a 20-times or higher excess of the aldobionic acid over Cr(VI) is used. The redox reaction takes place through a complex multistep mechanism, which involves the formation of intermediate Cr(IV) and Cr(V) species. Cr(IV) reacts with lactobionic acid much faster than Cr(V) and Cr(VI) do, and cannot be directly detected. However, the formation of CrO(2)(2+), observed by the first time for an acid saccharide/Cr(VI) system, provides indirect evidence for the intermediacy of Cr(IV) in the reaction path. Cr(VI) and the intermediate Cr(V) react with lactobionic acid at comparable rates, being the complete rate laws for the Cr(VI) and Cr(V) consumption expressed by: -d[Cr(VI)]/dt=[k(I)+k(II)[H(+)]][lactobionicacid][Cr(VI)], where k(I)=(4.1+/-0.1) x 10(-3) M(-1) s(-1) and k(II)=(2.1+/-0.1) x 10(-2) M(-2) s(-1); and -d[Cr(V)]/dt=[k(III)[H(+)]+(k(IV)+k(V)[H(+)])[lactobionicacid]] [Cr(V)], where k(III)=(1.8+/-0.1) x 10(-3) M(-1) s(-1), k(IV)=(1.1+/-0.1) x 10(-2) M(-1) s(-1) and k(V)=(1.0+/-0.1) x 10(-2) M(-2) s(-1), at 33 degrees C. The Electron Paramagnetic Resonance (EPR) spectra show that five-co-ordinate oxo-Cr(V) bischelates are formed at pH 1-5 with the aldobionic acid bound to Cr(V) through the alpha-hydroxyacid group.     

Cobalt and the iron acquisition pathway: competition towards interaction with receptor 1

During iron acquisition by the cell, complete homodimeric transferrin receptor 1 in an unknown state (R1) binds iron-loaded human serum apotransferrin in an unknown state (T) and allows its internalization in the cytoplasm. T also forms complexes with metals other than iron. Are these metals incorporated by the iron acquisition pathway and how can other proteins interact with R1? We report here a four-step mechanism for cobalt(III) transfer from CoNtaCO(3)(2-) to T and analyze the interaction of cobalt-loaded transferrin with R1. The first step in cobalt uptake by T is a fast transfer of Co(3+) and CO(3)(2-) from CoNtaCO(3)(2-) to the metal-binding site in the C-lobe of T: direct rate constant, k(1)=(1.1+/-0.1) x 10(6) M(-1) s(-1); reverse rate constant, k(-1)=(1.9+/-0.6) x 10(6) M(-1) s(-1); and equilibrium constant, K=1.7+/-0.7. This step is followed by a proton-assisted conformational change of the C-lobe: direct rate constant, k(2)=(3+/-0.3) x 10(6) M(-1) s(-1); reverse rate constant, k(-2)=(1.6+/-0.3) x 10(-2) s(-1); and equilibrium constant, K(2a)=5.3+/-1.5 nM. The two final steps are slow changes in the conformation of the protein (0.5 h and 72 h), which allow it to achieve its final thermodynamic state and also to acquire second cobalt. The cobalt-saturated transferrin in an unknown state (TCo(2)) interacts with R1 in two different steps. The first is an ultra-fast interaction of the C-lobe of TCo(2) with the helical domain of R1: direct rate constant, k(3)=(4.4+/-0.6)x10(10) M(-1) s(-1); reverse rate constant, k(-3)=(3.6+/-0.6) x 10(4) s(-1); and dissociation constant, K(1d)=0.82+/-0.25 muM. The second is a very slow interaction of the N-lobe of TCo(2) with the protease-like domain of R1. This increases the stability of the protein-protein adduct by 30-fold with an average overall dissociation constant K(d)=25+/-10 nM. The main trigger in the R1-mediated iron acquisition is the ultra-fast interaction of the metal-loaded C-lobe of T with R1. This step is much faster than endocytosis, which in turn is much faster than the interaction of the N-lobe of T with the protease-like domain. This can explain why other metal-loaded transferrins or a protein such as HFE-with a lower affinity for R1 than iron-saturated transferrin but with, however, similar or higher affinities for the helical domain than the C-lobe-competes with iron-saturated transferrin in an unknown state towards interaction with R1.     

Thermodynamics of the binding of galactopyranoside derivatives to the basic lectin from winged bean (Psophocarpus tetrogonolobus).

The thermodynamics of the binding of D-galactopyranoside (Gal), 2-acetamido-2-deoxygalactopyranoside (GalNAc), methyl-alpha-D-galactopyranoside, and methyl-beta-D-galactopyranoside to the basic agglutinin from winged bean (WBAI) in 0.02 M sodium phosphate and 0.15 M sodium chloride buffer have been investigated from 298.15 to 333.15 K by titration calorimetry and at the denaturation temperature by differential scanning calorimetry (DSC). WBAI is a dimer with two binding sites. The titration calorimetry yielded single-site binding constants ranging from 0.56 +/- 0.14 x 10(3) M-1 for Gal at 323.15 K to 7.2 +/- 0.5 x 10(3) M-1 for GalNAc at 298.15 K and binding enthalpies ranging from -28.0 +/- 2.0 kJ mol-1 for GalNAc at 298.15 K to -14.3 +/- 0.1 kJ mol-1 for methyl-beta-D-galactopyranoside at 322.65 K. The denaturation transition consisted of two overlapping peaks over the pH range 5.6-7.4. Fits of the differential scanning calorimetry data to a two-state transition model showed that the low temperature transition (341.6 +/- 0.4 K at pH 7.4) consisted of two domains unfolding as a single entity while the higher temperature transition (347.8 +/- 0.6 K at pH 7.4) is of the remaining WBAI dimer unfolding into two monomers. Both transitions shift to higher temperatures and higher calorimetric enthalpies with increase in added ligand concentration at pH 7.4. Analysis of the temperature increase as a function of added ligand concentration suggests that one ligand binds to the two domains unfolding at 341.6 +/- 0.6 K and one ligand binds to the domain unfolding at 347.8 +/- 0.6 K.     

Cooperativity and intermediates in the equilibrium reactions of Fe(II,III) with ethanethiolate in N-methylformamide solution

The reaction of FeCl(2) or FeCl(3) with sodium ethanethiolate (SEt) in N-methylformamide (NMF) has been reevaluated to rectify a previous Fe(II) oxidation artifact. On titrating Fe(II) with EtS(-) concentrations up to 12 mol Eq, new features in the UV/vis spectrum (epsilon(344)=(3.1+/-0.2)x10(3) M(-1) cm(-1); epsilon(486)=(4.5+/-0.1)x10(2) M(-1) cm(-1)) indicated that the first observable step was the formation of a single complex different from the known tetrahedral tetrathiolate, [Fe(SEt)(4)](2-) . As the EtS(-) concentration increased past 12.5 mol Eq the UV/vis spectrum gradually transformed to that of [Fe(SEt)(4)](2-) (lambda(max)=314 nm). A Hill-formalism fit to the titration data of the initially formed complex indicated cooperative ligation by three ethanethiolate ions, with K(coop)=(1.7+/-0.1)x10(3) M(-3) and Hill "n"=2.4+/-0.1 (r=0.997). The 3:1 EtS(-)-Fe(II) complex is proposed to be [Fe(2)(SEt)(6)](2-). Titration of Fe(III) with EtS(-) showed direct cooperative formation of [Fe(SEt)(4)](-) [epsilon(340)=(3.4+/-0.5)x10(3) M(-1) cm(-1)] with a Hill-formalism K(coop)=(4.3+/-0.1)x10(2) M(-4) and a Hill coefficient "n"=3.7+/-0.2 (r=0.996). Further ligation past [Fe(SEt)(4)](-) was observed at EtS(-) concentrations above 35 mol Eq. The Fe(III) Hill constants are at variance with our previous report. However, the UV/vis spectrum of Fe(III) in NMF solution was found to change systematically over time, consistent with a slow progressive deprotonation of [Fe(nmf)](3+). The observed time-to-time differences in the equilibrium chemistry of Fe(III) with ethanethiolate in NMF thus reflect variation in the microscopic solution composition of FeCl(3) in alkaline NMF solvent. These results are related to the chemistry of nitrogenase FeMo cofactor in alkaline NMF solution.     

Structural and mechanistic insight into the inhibition of aspartic proteases by a slow-tight binding inhibitor from an extremophilic Bacillus sp.: correlation of the kinetic parameters with the inhibitor induced conformational changes

We present here the first report of a hydrophilic peptidic inhibitor, ATBI, from an extremophilic Bacillus sp. exhibiting a two-step inhibition mechanism against the aspartic proteases, pepsin and F-prot from Aspergillus saitoi. Kinetic analysis shows that these proteases are competitively inhibited by ATBI. The progress curves are time-dependent and consistent with slow-tight binding inhibition: E + I right arrow over left arrow (k(3), k(4)) EI right arrow over left arrow (k(5), k(6)) EI. The K(i) values for the first reversible complex (EI) of ATBI with pepsin and F-prot were (17 +/- 0.5) x 10(-9) M and (3.2 +/- 0.6) x 10(-6) M, whereas the overall inhibition constant K(i) values were (55 +/- 0.5) x 10(-12) M and (5.2 +/- 0.6) x 10(-8) M, respectively. The rate constant k(5) revealed a faster isomerization of EI for F-prot [(2.3 +/- 0.4) x 10(-3) s(-1)] than pepsin [(7.7 +/- 0.3) x 10(-4) s(-1)]. However, ATBI dissociated from the tight enzyme-inhibitor complex (EI) of F-prot faster [(3.8 +/- 0.5) x 10(-5) s(-1)] than pepsin [(2.5 +/- 0.4) x 10(-6) s(-1)]. Comparative analysis of the kinetic parameters with pepstatin, the known inhibitor of pepsin, revealed a higher value of k(5)/k(6) for ATBI. The binding of the inhibitor with the aspartic proteases and the subsequent conformational changes induced were monitored by exploiting the intrinsic tryptophanyl fluorescence. The rate constants derived from the fluorescence data were in agreement with those obtained from the kinetic analysis; therefore, the induced conformational changes were correlated to the isomerization of EI to EI. Chemical modification of the Asp or Glu by WRK and Lys residues by TNBS abolished the antiproteolytic activity and revealed the involvement of two carboxyl groups and one amine group of ATBI in the enzymatic inactivation.     

Remarkably stereoselective photoinduced electron-transfer reaction between zinc myoglobin and optically active binaphthyl bisviologen

We have designed and synthesized new optically active bisviologens ([BNMV](4+)) containing a binaphthyl moiety to examine the stereoselective photoinduced electron-transfer (ET) reactions with zinc-substituted myoglobin (ZnMb) by flash photolysis. The photoexcited triplet state of ZnMb, (3)(ZnMb)*, was successfully quenched by [BNMV](4+) ions to form the radical pair of a ZnMb cation (ZnMb(.+)) and a reduced viologen ([BNMV](.3+)), followed by a thermal ET reaction to the ground state. The rate constants ( k(q)) for the ET quenching at 25 degrees C were obtained as k(q)( R)=(2.9+/-0.2)x10(7) M(-1) s(-1) and k(q)( S)=(2.2+/-0.2)x10(7) M(-1) s(-1), respectively. The ratio of k(q)( R)/ k(q)( S)=1.3 indicates that the ( R)-isomer of the chiral viologen preferentially quenches (3)(ZnMb)*. On the other hand, the rate constants ( k) for the thermal ET reaction from [BNMV](.3+) to ZnMb(-+) at 25 degrees C were k( R)=(1.2+/-0.1)x10(8) M(-1) s(-1) and k( S)=(0.47+/-0.03)x10(8) M(-1) s(-1), respectively, and the ratio remarkably increased to k( R)/ k( S)=2.6. The activation parameters, Delta H(not equal) and Delta S(not equal), were determined from the kinetic measurements at various temperatures (10-30 degrees C) to understand the ET mechanisms. In the quenching reaction, the energy differences of Delta Delta H*(R- S) and T Delta Delta S*( R- S) at 25 degrees C were calculated to be -3.9+/-1.6 and -3.3+/-0.2 kJ mol(-1), respectively, whereas Delta Delta H*( R-S)=7.7+/-1.9 kJ mol(-1 )and T Delta Delta S*( R-S)=9.9+/-0.5 kJ mol(-1 )were found for the thermal ET reaction. Therefore, the thermal ET reaction to the ground state was proved to be dominated by the entropy term, and the large stereoselectivity may arise from the decrease in charge repulsion between donor and acceptor.     

Cooperative interaction of human XPA stabilizes and enhances specific binding of XPA to DNA damage

Human xeroderma pigmentosum group A (XPA) is an essential protein for nucleotide excision repair (NER). We have previously reported that XPA forms a homodimer in the absence of DNA. However, what oligomeric forms of XPA are involved in DNA damage recognition and how the interaction occurs in terms of biochemical understanding remain unclear. Using the homogeneous XPA protein purified from baculovirus-infected Sf21 insect cells and the methods of gel mobility shift assays, gel filtration chromatography, and UV-cross-linking, we demonstrated that both monomeric and dimeric XPA bound to the DNA adduct of N-acetyl-2-aminofluorene (AAF), while showing little affinity for nondamaged DNA. The binding occurred in a sequential and protein concentration-dependent manner. At relatively low-protein concentrations, XPA formed a complex with DNA adduct as a monomer, while at the higher concentrations, an XPA dimer was involved in the specific binding. Results from fluorescence spectroscopic and competitive binding analyses indicated that the specific binding of XPA to the adduct was significantly facilitated and stabilized by the presence of the second XPA in a positive cooperative manner. This cooperative binding exhibited a Hill coefficient of 1.9 and the step binding constants of K(1) = 1.4 x 10(6) M(-)(1) and K(2) = 1.8 x 10(7) M(-)(1). When interaction of XPA and RPA with DNA was studied, even though binding of RPA-XPA complex to adducted DNA was observed, the presence of RPA had little effect on the overall binding efficiency. Our results suggest that the dominant form for XPA to efficiently bind to DNA damage is the XPA dimer. We hypothesized that the concentration-dependent formation of different types of XPA-damaged DNA complex may play a role in cellular regulation of XPA activity.     

DNA helicase RepA: cooperative ATPase activity and binding of nucleotides

The steady-state kinetic parameters of the ATPase activity of the homohexameric DNA helicase RepA and the binding of the fluorescent analogue epsilonADP to RepA have been studied. ssDNA stimulates RepA ATPase activity optimally at acidic pH 5.3-6.0. The sigmoidal kinetic curves in both the absence and presence of ssDNA show strong positive cooperativity for ATP hydrolysis, with oligonucleotides longer than 10mer optimal for ssDNA-stimulated ATPase activity. Fluorescence titrations show that, at 25 degrees C and in the absence of DNA, the binding of epsilonADP to RepA is biphasic with three high (K(1) = 1.54 x 10(6) M(-1)) and three low (K(2) = 4.71 x 10(4) M(-)(1)) affinity binding sites differing by 30-40-fold in binding constants. In the absence of cofactors, RepA melts cooperatively at T(m) = 65.8 +/- 0.1 degrees C and is more stable in the presence of ATPgammaS, T(m) = 68.1 +/- 0.2 degrees C (DeltaDeltaG 0.95 kcal/mol), than in the presence of ADP, T(m) = 66. 5 +/- 0.1 degrees C (DeltaDeltaG 0.29 kcal/mol), indicating that the additional phosphate group in ATPgammaS has a significant influence on RepA structure. A model is proposed in which individual subunits of RepA sequentially and cooperatively perform a multistep ATP hydrolytic cycle.     

Thermodynamic analysis of heparin binding to human antithrombin.

The binding of heparin to human antithrombin III (ATIII) was investigated by titration calorimetry (TC) and differential scanning calorimetry (DSC). TC measurements of homogeneous high-affinity pentasaccharide and octasaccharide fragments of heparin in 0.02 M phosphate buffer and 0.15 M sodium chloride (pH 7.3) yielded binding constants of (7.1 +/- 1.3) x 10(5) M-1 and (6.7 +/- 1.2) x 10(6) M-1, respectively, and corresponding binding enthalpies of -48.3 +/- 0.7 and -54.4 +/- 5.4 kJ mol-1. The binding enthalpy of heparin in phosphate buffer (0.02 M, 0.15 M NaCl, pH 7.3) was estimated from TC measurements to be -55 +/- 10 kJ mol-1, while the enthalpy in Tris buffer (0.02 M, 0.15 M NaCl, pH 7.3) was -18 +/- 2 kJ mol-1. The heparin-binding affinity was shown by fluorescence measurements not to change under these conditions. The 3-fold lower binding enthalpy in Tris can be attributed to the transfer of a proton from the buffer to the heparin-ATIII complex. DSC measurements of the ATIII unfolding transition exhibited a sharp denaturation peak at 329 +/- 1 K with a van 't Hoff enthalpy of 951 +/- 89 kJ mol-1, based on a two-state transition model and a much broader transition from 333 to 366 K. The transition peak at 329 K accounted for 9-18% of the total ATIII. At sub-saturate heparin concentrations, the lower temperature peak became bimodal with the appearance of a second transition peak at 336 K. At saturate heparin concentration only the 336 K peak was observed. This supports a two domain model of ATIII folding in which the lower stability domain (329 K) binds and is stabilized by heparin.     

Association of Myn, the murine homolog of max, with c-Myc stimulates methylation-sensitive DNA binding and ras cotransformation.

Myn, a novel murine approximately 18 kd basic/helix-loop-helix/"leucine zipper" (B/HLH/LZ) protein, forms a specific DNA-binding complex with the c-Myc oncoprotein through the HLH/LZ motif in both proteins. c-Myc/Myn recognizes a c-Myc-binding site (GACCACGTGGTC) with higher affinity than either protein by itself. CpG methylation of the recognition site greatly inhibits DNA binding, suggesting that DNA methylation may regulate the c-Myc/Myn complex in vivo. In 3T3 fibroblasts, Myn mRNA levels are induced several-fold by serum with delayed early kinetics, suggesting regulation by immediate-early gene products. Coexpression of Myn in a myc/ras rat embryo fibroblast focus formation assay specifically augmented c-myc transforming activity. We suggest that interaction of Myn with c-Myc stabilizes sequence-specific DNA binding in vivo.     

A molecular beacon strategy for real-time monitoring of triplex DNA formation kinetics

We used a molecular beacon (MB) containing a 15-mer triplex-forming oligonucleotide (TFO) to probe in real-time the kinetics of triplex DNA formation in the left side of the TCl tract (502-516) of the c-src proto-oncogene in vitro. The metal ions Na+, K+, and Mg2+ stabilized triplex DNA at this site. The pseudo-first-order rate constant (kpsi) and the second-order association rate constant (k1) for the binding of the MB to the target duplex in 10 mM sodium phosphate buffer, pH 7.3, increased from 3.2 +/- 0.9 to 15 +/- 2.8 x 10(-3) s(-1) and 6.4 +/- 1.8 to 30 +/- 5.6 x 102 M(-1) s(-1), respectively, on increasing the MgCl2 concentration from 1 to 2.5 mM. Similar values were obtained for the triplex DNA stabilized by NaCl (100-250 mM). Surprisingly, the values were around 2 times higher in the presence of KCl. The AG of triplex formation in the presence of 1 mM MgCl2, 150 mM NaCl, and 150 mM KCl were -7.8 +/- 0.3, -8.2 +/- 0.3 and -8.7 +/- 0.7 kcal/mol respectively, despite significant differences in the values of deltaH and deltaS, suggesting enthalpy-entropy compensation in the stabilization of the triplex DNA by these metal ions. These results show the utility of MBs ih probing triplex DNA formation and in evaluating kinetic and thermodynamic parameters important for the design and development of TFOs as triplex DNA-based therapeutic agents.     

Interaction of antioxidant flavonoids with tRNA: intercalation or external binding and comparison with flavonoid-DNA adducts

Antioxidants are essential to good health. Flavonoids are powerful antioxidants, and prevent DNA damage. The antioxidative protections are related to their binding modes to a DNA duplex and complexation with free radicals in vivo. Recently we reported the interaction of flavonoids with DNA in vitro (Kanakis et al., J. Biomol. Struct. Dyn. 22, 719-724, 2005), where polyphenol different binding modes were discussed. The aim of this study was to examine the interaction of transfer RNA with quercetin (que), kaempferol (kae), and delphinidin (del) in aqueous solution at physiological conditions and to make a comparison with the corresponding pigment-DNA adducts. Constant tRNA concentration (6.25 mM) and various drug/RNA(phosphate) molar ratios of 1/48 to 1/8 were used. FTIR and UV-visible difference spectroscopic methods have been applied to determine the drug binding mode, the binding constants, and the effects of drug complexation on the stability and conformation of tRNA duplex. Both intercalative and external binding modes were observed. Structural analysis showed que, kae, and a del intercalate tRNA duplex with minor external binding to the major or minor groove and the backbone phosphate group with overall binding constants K (que) = 4.80 x 10(4) M(1), K (kae) = 4.65 x 10(4) M(1), and K (del) = 9.47 x 10(4) M(1). The stability of adduct formation is in the order of del > que > kae. A comparison with flavonoids-DNA adducts showed both intercalation and external bindings with the stability order K (que) = 7.25 x 10(4) M(1), K (kae) = 3.60 x 10(4) M(1), and K (del) = 1.66 x 10(4) M(1). Low flavonoid concentration induces helical stabilization, whereas high pigment content causes helix opening. A partial Bto A-DNA transition occurs at high drug concentration, while tRNA remains in the A-family structure.     

Metal ion-directed cooperative DNA binding of small molecules

Compound (1), which consists of an oxine and a pyridinium group, was synthesized as a metal-responsive DNA binding ligand. Two 1s coordinate to a Cu(II) to form a stable dimer (1(2)-Cu), even in the presence of DNA. The binding of 1 with sonicated calf thymus DNA was enhanced by ca. 10(3) times after forming the dimer; the binding constants were estimated to be 3.2 x 10(4)M(-1) and 2.4 x 10(7)M(-1) in the absence and the presence, respectively, of a half mole of Cu(II). The enormous acceleration of the binding is partly attributed to the generation of a dicationic charge by the formation of the dimer. High cooperativity between dimers could be also responsible; dimers would gather along the duplex as a template to form 1D spiral aggregates.     

Spectroscopic properties of the metalloregulatory Cd(II) and Pb(II) sites of S. aureus pI258 CadC

Staphylococcus aureus pI258 CadC is an extrachromosomally encoded metalloregulatory repressor protein from the ArsR superfamily which negatively regulates the expression of the cad operon in a metal-dependent fashion. The metalloregulatory hypothesis holds that direct binding of thiophilic divalent cations including Cd(II), Pb(II), and Zn(II) by CadC allosterically regulates the DNA binding activity of CadC to the cad operator/promoter (O/P). This report presents a detailed characterization of the metal binding and DNA binding properties of wild-type CadC. The results of analytical ultracentrifugation experiments suggest that both apo- and Cd(1)-CadC are stable or weakly dissociable homodimers characterized by a K(dimer) = 3.0 x 10(6) M(-1) (pH 7.0, 0.20 M NaCl, 25.0 degrees C) with little detectable effect of Cd(II) on the dimerization equilibrium. As determined by optical spectroscopy, the stoichiometry of Cd(II) and Pb(II) binding is approximately 0.7-0.8 mol/mol of wild-type CadC monomer. Chelator (EDTA) competition binding isotherms reveal that Cd(II) binds very tightly, with K(Cd) = 4.3 (+/-1.8) x 10(12) M(-1). The results of UV-Vis and X-ray absorption spectroscopy of the Cd(1) complex are consistent with a tetrathiolate (S(4)) complex formed by four cysteine ligands. The (113)Cd NMR spectrum reveals a single resonance of delta = 622 ppm, consistent with an S(3)(N,O) or unusual upfield-shifted S(4) complex. The Pb(II) complex reveals two prominent absorption bands at 350 nm (epsilon = 4000 M(-1) cm(-1)) and 250 nm (epsilon = 41 000 M(-1) cm(-1)), spectral properties consistent with three or four thiolate ligands to the Pb(II) ion. The change in the anisotropy of a fluorescein-labeled oligonucleotide containing the cad O/P upon binding CadC and analyzed using a dissociable CadC dimer binding model reveals that apo-CadC forms a high-affinity complex [K(a) = (1.1 +/- 0.3) x 10(9) M(-1); pH 7.0, 0.40 M NaCl, 25 degrees C], the affinity of which is reduced approximately 300-fold upon the binding of a single molar equivalent of Cd(II) or Pb(II). The implications of these findings on the mechanism of metalloregulation are discussed.     

The effects of nucleotides on MutS-DNA binding kinetics clarify the role of MutS ATPase activity in mismatch repair

MutS protein initiates mismatch repair with recognition of a non-Watson-Crick base-pair or base insertion/deletion site in DNA, and its interactions with DNA are modulated by ATPase activity. Here, we present a kinetic analysis of these interactions, including the effects of ATP binding and hydrolysis, reported directly from the mismatch site by 2-aminopurine fluorescence. When free of nucleotides, the Thermus aquaticus MutS dimer binds a mismatch rapidly (k(ON)=3 x 10(6) M(-1) s(-1)) and forms a stable complex with a half-life of 10 s (k(OFF)=0.07 s(-1)). When one or both nucleotide-binding sites on the MutS*mismatch complex are occupied by ATP, the complex remains fairly stable, with a half-life of 5-7 s (k(OFF)=0.1-0.14 s(-1)), although MutS(ATP) becomes incapable of (re-)binding the mismatch. When one or both nucleotide-binding sites on the MutS dimer are occupied by ADP, the MutS*mismatch complex forms rapidly (k(ON)=7.3 x 10(6) M(-1) s(-1)) and also dissociates rapidly, with a half-life of 0.4 s (k(OFF)=1.7 s(-1)). Integration of these MutS DNA-binding kinetics with previously described ATPase kinetics reveals that: (a) in the absence of a mismatch, MutS in the ADP-bound form engages in highly dynamic interactions with DNA, perhaps probing base-pairs for errors; (b) in the presence of a mismatch, MutS stabilized in the ATP-bound form releases the mismatch slowly, perhaps allowing for onsite interactions with downstream repair proteins; (c) ATP-bound MutS then moves off the mismatch, perhaps as a mobile clamp facilitating repair reactions at distant sites on DNA, until ATP is hydrolyzed (or dissociates) and the protein turns over.     

The DNA binding properties of the Escherichia coli RecQ helicase

The RecQ helicase family is highly conserved from bacteria to men and plays a conserved role in the preservation of genome integrity. Its deficiency in human cells leads to a marked genomic instability that is associated with premature aging and cancer. To determine the thermodynamic parameters for the interaction of Escherichia coli RecQ helicase with DNA, equilibrium binding studies have been performed using the thermodynamic rigorous fluorescence titration technique. Steady-state fluorescence anisotropy measurements of fluorescein-labeled oligonucleotides revealed that RecQ helicase bound to DNA with an apparent binding stoichiometry of 1 protein monomer/10 nucleotides. This stoichiometry was not altered in the presence of AMPPNP (adenosine 5'-(beta,gamma-imido) triphosphate) or ADP. Analyses of RecQ helicase interactions with oligonucleotides of different lengths over a wide range of pH, NaCl, and nucleic acid concentrations indicate that the RecQ helicase has a single strong DNA binding site with an association constant at 25 degrees C of K=6.7 +/- 0.95 x 10(6) M(-1) and a cooperativity parameter of omega=25.5 +/- 1.2. Both single-stranded DNA and double-stranded DNA bind competitively to the same site. The intrinsic affinities are salt-dependent, and the formation of DNA-helicase complex is accompanied by a net release of 3-4 ions. Allosteric effects of nucleotide cofactors on RecQ binding to DNA were observed only for single-stranded DNA in the presence of 1.5 mM AMPPNP, whereas both AMPPNP and ADP had no detectable effect on double-stranded DNA binding over a large range of nucleotide cofactor concentrations.