Effects of fermentation feeding strategies prior to induction of expression of a recombinant malaria antigen inEscherichia coli

Summary A variety of feeding strategies have been described for attaining high cell densities in fed-batch fermentors. Although cell density is an important component in the produtivity of recombinant fermentations, it must be achievable with high product expression levels. Experiments were conducted to study the influence of fermentation feeding strategies on the production of a recombinant malaria antigen inEscherichia coli. C-source feeding profiles were calculated to maintain specific growth rates at 0.1, 0.2, 0.35, and 0.5 l/h prior to induction in defined and complex media using an exponential growth model. Fed-batch fermentations employing these feeding profiles effectively controlled the specific growth rates prior to induction. Antigen yields per dry cell weight did not vary with specific growth rate. Antigen yields from fed-batch fermentations achieving high cell densities were similar to batch fermentations achieving low cell densities. These results show that C-feeding policies can limit growth without reducing expression levels in some systems, and suggest applications in managing oxygen demand and catabolic by-product formation during process scale-up.     

Production of pediocin SM-1 by Pediococcus pentosaceus Mees 1934 in fed-batch fermentation: Effects of sucrose concentration in a complex medium and process modeling

Production of pediocin SM-1 by Pediococcus pentosaceus Mees 1934 was investigated in semi-aerobic, pH-controlled, batch and fed-batch fermentations using a complex medium containing sucrose as the main source of carbon. The effects of sucrose concentration were studied in fed-batch fermentations in which a sucrose solution was added at stable feeding rates (5, 7, 9 and 10 g/l/h). The results showed that pediocin is produced as a product of the primary metabolism and its titer could be greatly improved by adjusting the sucrose feeding rate in fed-batch fermentation. The maximum titer of pediocin of 145 AU/ml was obtained in the fed-batch culture with 7 g/l/h feeding rate and that was 119% higher compared to the titer obtained in batch culture. Higher feeding rates (9 and 10 g/l/h) resulted in decreased pediocin yields while biomass levels appeared to be rather unaffected. The specific rate of pediocin formation was also sensitive to sucrose concentration levels. A mathematical model developed on the basis of well-known rate equations for batch and fed-batch cultures and growth associated production, described successfully cell growth, sucrose assimilation, lactate production and pediocin production in fed-batch culture.     

Switching the mode of sucrose utilization by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Background  

Overflow metabolism is an undesirable characteristic of aerobic cultures of Saccharomyces cerevisiae during biomass-directed processes. It results from elevated sugar consumption rates that cause a high substrate conversion to ethanol and other bi-products, severely affecting cell physiology, bioprocess performance, and biomass yields. Fed-batch culture, where sucrose consumption rates are controlled by the external addition of sugar aiming at its low concentrations in the fermentor, is the classical bioprocessing alternative to prevent sugar fermentation by yeasts. However, fed-batch fermentations present drawbacks that could be overcome by simpler batch cultures at relatively high (e.g. 20 g/L) initial sugar concentrations. In this study, a S. cerevisiae strain lacking invertase activity was engineered to transport sucrose into the cells through a low-affinity and low-capacity sucrose-H⁺ symport activity, and the growth kinetics and biomass yields on sucrose analyzed using simple batch cultures.     

Kinetic model-based feed-forward controlled fed-batch fermentation of Lactobacillus rhamnosus for the production of lactic acid from Arabic date juice

Arabic date is overproduced in Arabic countries such as Saudi Arabia and Iraq and is mostly composed of sugars (70–80 wt%). Here we developed a fed-batch fermentation process by using a kinetic model for the efficient production of lactic acid to a high concentration from Arabic date juice. First, a kinetic model of Lactobacillus rhamnosus grown on date juice in batch fermentation was constructed in EXCEL so that the estimation of parameters and simulation of the model can be easily performed. Then, several fed-batch fermentations were conducted by employing different feeding strategies including pulsed feeding, exponential feeding, and modified exponential feeding. Based on the results of fed-batch fermentations, the kinetic model for fed-batch fermentation was also developed. This new model was used to perform feed-forward controlled fed-batch fermentation, which resulted in the production of 171.79 g l^?1 of lactic acid with the productivity and yield of 1.58 and 0.87 g l^?1 h^?1, respectively.     

Monitoring of fed-batch <Emphasis Type="Italic">E. coli</Emphasis> fermentations with software sensors

Accurate monitoring and control of industrial bioprocess requires the knowledge of a great number of variables, being some of them not measurable with standard devices. To overcome this difficulty, software sensors can be used for on-line estimation of those variables and, therefore, its development is of paramount importance. An Asymptotic Observer was used for monitoring Escherichia coli fed-batch fermentations. Its performance was evaluated using simulated and experimental data. The results obtained showed that the observer was able to predict the biomass concentration profiles showing, however, less satisfactory results regarding the estimation of glucose and acetate concentrations. In comparison with the results obtained with an Extended Kalman Observer, the performance of the Asymptotic Observer in the fermentation monitoring was slightly better.     

High cell density fed-batch fermentations for lipase production: feeding strategies and oxygen transfer

This review is focused on the production of microbial lipases by high cell density fermentation. Lipases are among the most widely used of the enzyme catalysts. Although lipases are produced by animals and plants, industrial lipases are sourced almost exclusively from microorganisms. Many of the commercial lipases are produced using recombinant species. Microbial lipases are mostly produced by batch and fed-batch fermentation. Lipases are generally secreted by the cell into the extracellular environment. Thus, a crude preparation of lipases can be obtained by removing the microbial cells from the fermentation broth. This crude cell-free broth may be further concentrated and used as is, or lipases may be purified from it to various levels. For many large volume applications, lipases must be produced at extremely low cost. High cell density fermentation is a promising method for low-cost production: it allows a high concentration of the biomass and the enzyme to be attained rapidly and this eases the downstream recovery of the enzyme. High density fermentation enhances enzyme productivity compared with the traditional submerged culture batch fermentation. In production of enzymes, a high cell density is generally achieved through fed-batch operation, not through perfusion culture which is cumbersome. The feeding strategies used in fed-batch fermentations for producing lipases and the implications of these strategies are discussed. Most lipase-producing microbial fermentations require oxygen. Oxygen transfer in such fermentations is discussed.     

The acetone butanol fermentation on glucose and xylose. II. Regulation and kinetics in fed-batch cultures

The kinetics in fed-batch cultures of acetone butanol fermentation by Clostridium acetobutylicum is compared on glucose, xylose, and mixtures of both sugars. The final conversion yield of sugars into solvents always increases with the sugar feeding rate. At low feeding rates, the sugar concentration in the medium becomes limiting, which results in a slower cellular growth, a slower metabolic transition from an acid to a solvent fermentation and, thus, a higher accumulation of acids. It is only at sufficiently high feeding rates that fed-batch fermentations yield kinetic results comparable to those of batch fermentations. With mixtures of glucose and xylose, because of a maintained low glucose level, both sugars are taken up at the same rate during a first fermentation period. An earlier accumulation of xylose when the fermentation becomes inhibited suggest that xylose utilization is inhibited when the catabolic flux of glucose alone can satisfy the metabolic activity of the cell. Kinetic results with batch and fed-batch fermentations indicate several important features of the regulation of C. acetobutylicum metabolism: an early inhibition by the produced acids; an initiation of solvent formation between 4 and 6 g/L acetic and butyric acid depending on the metabolic activity of the cell; a metabolic transition from acids to solvents production at a rate closely related to the rate of sugar uptake; during solvent production, a reassimilation of acids above a minimal rate of sugar consumption of 0.2 h(-1); a final inhibition of the fermentation at a total butanol and acids concentration of ca. 20 g/L.     

Improved production and stability ofE. coli recombinants expressing transketolase for large scale biotransformation

Summary TheE.coli tkt gene has been subcloned into high copy number vectors. In fed batch fermentations up to 4gL^–1 of soluble intracellular transketolase was produced representing 43% of the total cell protein. Increased plasmid stability during fed-batch fermentations was obtained by using kanamycin resistant pBGS vectors rather than the ampicillin resistant pUC vectors. Plasmid stability was maintained throughout growth in a complex medium without any selective pressure by incorporating thecer region fromColE1 into the expression construct.     

On the stability of plasmid DNA vectors during cell culture and purification

Gene therapy and DNA vaccination applications have increased the demand for highly purified plasmid DNA (pDNA) in the last years. One of the main problems related to the scale-up of pDNA purification is the degradation of the supercoiled (sc) isoforms during cell culture and multi-stage purification. In this work, a systematic study of the stability of two model plasmids (3,697 and 6,050 bp) during a mid-scale production process, which includes fermentation, alkaline lysis, isopropanol and ammonium sulphate precipitation and hydrophobic interaction chromatography, was performed. Results indicate that by extending cell culture (up to 26 h) and cell lysis (up to 2 h) it is possible to significantly reduce the amounts of RNA, without significantly compromising the yields of the sc pDNA isoform, a feature that could be conveniently exploited for downstream processing purposes. The stability of pDNA upon storage of E. coli pellets at different temperatures indicates that, differently from RNA, pDNA is remarkably stable when stored in cell pellets (>3 weeks at 4°C, >12 weeks at −20°C) prior to processing. With alkaline lysates, however, storage at −20°C is mandatory to avoid sc pDNA degradation within the first 8 weeks. Furthermore, the subsequent purification steps could be carried out at room temperature without significant pDNA degradation. Since the unit operations and process conditions studied in this work are similar to those generally used for plasmid DNA production, the results presented here may contribute to improve the current knowledge on plasmid stability and process optimization. Authors Freitas and Azzoni contributed equally to this work.     

Enhanced 2,3-butanediol production by <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> SDM

Enhanced 2,3-butanediol (BD) production was carried out by Klebsiella pneumoniae SDM. The nutritional requirements for BD production by K. pneumoniae SDM were optimized statistically in shake flask fermentations. Corn steep liquor powder and (NH₄)₂HPO₄ were identified as the most significant factors by the two-level Plackett–Burman design. Steepest ascent experiments were applied to approach the optimal region of the two factors and a central composite design was employed to determine their optimal levels. The optimal medium was used to perform fed-batch fermentations with K. pneumoniae SDM. BD production was then studied in a 5-l bioreactor applying different fed-batch strategies, including pulse fed batch, constant feed rate fed batch, constant residual glucose concentration fed batch, and exponential fed batch. The maximum BD concentration of 150 g/l at 38 h with a diol productivity of 4.21 g/l h was obtained by the constant residual glucose concentration feeding strategy. To the best of our knowledge, these results were new records on BD fermentation. Cuiqing Ma and Ailong Wang contributed equally to this work.     

Mineralization of pentachlorophenol in a contaminated soil by Pseudomonas sp UG30 cells encapsulated in κ-carrageenan

A fermentation process in Escherichia coli for production of supercoiled plasmid DNA for use as a DNA vaccine was developed using an automated feed-back control nutrient feeding strategy based on dissolved oxygen (DO) and pH. The process was further automated through a computer-aided data processing system to regulate the cell growth rate by controlling interactively both the nutrient feed rate and agitation speed based on DO. The process increased the total yield of the plasmid DNA by approximately 10-fold as compared to a manual fed-batch culture. The final cell yield from the automated process reached 60 g L⁻¹ of dry cell weight (OD₆₀₀ = 120) within 24 h. A plasmid DNA yield of 100 mg L⁻¹ (1.7 mg g⁻¹ cell weight) was achieved by using an alkaline cell lysis method. Plasmid yield was confirmed using High Performance Liquid Chromatography (HPLC) analysis. Because cells had been grown under carbon-limiting conditions in the automated process, acetic acid production was minimal (below 0.01 g L⁻¹) throughout the fed-batch stage. In contrast, in the manual process, an acid accumulation rate as high as 0.36 g L⁻¹ was observed, presumably due to the high nutrient feed rates used to maintain a maximum growth rate. The manual fed-batch process produced a low cell density averaging 10–12 g L⁻¹ (OD₆₀₀ = 25–30) and plasmid yields of 5–8 mg L⁻¹ (approximately 0.7 mg g⁻¹ cells). The improved plasmid DNA yields in the DO- and pH-based feed-back controlled process were assumed to be a result of a combination of increased cell density, reduced growth rate (μ) from 0.69 h⁻¹ to 0.13 h⁻¹ and the carbon/nitrogen limitation in the fed-batch stage. The DO- and pH-based feed-back control, fed-batch process has proven itself to be advantageous in regulating cell growth rate to achieve both high cell density and plasmid yield without having to use pure oxygen. The process was reproducible in triplicate fermentations at both 7-L and 80-L scales. Received 22 March 1996/ Accepted in revised form 20 September 1996     

Pullulan from peat hydrolyzate fermentation kinetics

The Luedeking-Piret equation was used to fit the kinetic data of pullulan fermentations from peat hydrolyzate substrate. In batch mode, the kinetic parameters m, n, alpha, and beta varied as a function of fermentation conditions: aeration rate, agitation speed, and temperature. In constant-feed fed-batch mode, the parameters Varied according to the feed rates. In peat hydrolyzate medium, the polysaccharide synthesis was strongly growth associated in batch and continuous fermentations but entirely growth associated in fedbatch fermentations. The fed-batch mode of fermentation with an appropriate feed rate is more advantageous with respect to batch and continuous fermentations. Therefore, if the fermentation is started batchwise and then followed by fed-batch mode at a constant feed rate, the overall polysaccharide productivity (g pullulan/L h) is significantly higher than those obtained with batch or continuous fermentations using the same total medium volume.     

On-line monitoring of ethanol,acetaldehyde and glycerol during industrial fermentations with Saccharomyces cerevisiae

Industrial fermentations carried out in a 500-1 bioreactor were monitored on-line by a prototype of a split-flow modified thermal biosensor. Acetaldehyde and glycerol in the extracellular broth were monitored over the first 48 h of fed-batch fermentations. The aim was to determine the usefulness of these secondary metabolites for on-line monitoring and control. When fermentation of the 13–16 g/l batch sugar was monitored, using immobilised aldehyde dehydrogenase, the acetaldehyde reached a peak value of 0.3 g/l. With immobilised alcohol oxidase a much larger peak of 3.5 g/l ethanol was seen immediately after the acetaldehyde peak. When glycerokinase was used a delayed peak of 1 g/l glycerol was monitored. Of the three metabolites monitored, the ethanol proved the most valuable indicator of suitable timing for the start of the feeding phase and later for controlling and preventing overfeed using the on-line biosensor system.     

Influence of culture modes on the microbial production of hyaluronic acid by <Emphasis Type="Italic">Streptococcus zooepidemicus</Emphasis>

The principal objective of this study was to assess the effects of culture modes including batch culture, pulse fed-batch culture, constant feeding rate fed-batch culture, and exponential fed-batch culture on the production of hyaluronic acid (HA) by Streptococcus zooepidemicus. Batch cultures had the highest levels of HA productivity, whereas fed-batch cultures were more favorable with regard to cell growth, and exponential fed-batch cultures evidenced the highest cell concentrations. A two-step culture model was proposed to enhance HA production: an exponential fed-batch culture was conducted prior to 8 h and then sucrose supplementation was applied for 8 h to start the batch fermentation of S. zooepidemicus. HA production and productivity were increased by 36 and 37% in the proposed two-step culture process as compared with that observed in the batch culture, respectively. The proposed two-step culture model can be applied in the production of secondary metabolites, and particularly of the exopolysaccharides.     

Bacterial cellulose production by fed-batch fermentation in molasses medium

Batch and fed-batch fermentations for bacterial cellulose (BC) production using molasses as a carbon source by Acetobacter xylinum BPR2001 were carried out in a jar fermentor. For improvement of BC production, molasses was subjected to H2SO4-heat treatment. The maximum BC concentration by this treated molasses increased 76%, and the specific growth rate increased 2-fold compared with that by untreated molasses. In batch fermentation, when the initial sugar concentrations of H2SO4-heat-treated molasses were varied from 20 to 70 g/L, the highest value of maximum BC concentration of 5.3 g/L was observed at 20 g/L. BC production in intermittent fed-batch (IFB) fermentation was conducted referring to the data in batch fermentation, and the highest BC production of 7.82 g/L was obtained when 0.2 L of molasses medium was added five times. When continuous fed-batch (CFB) fermentations were conducted, maximum BC concentration was obtained with a feeding rate of 6.3 g-sugar/h, which was derived from the optimal IFB experiment.     

A novel feeding strategy for enhanced plasmid stability and protein production in recombinant yeast fedbatch fermentation

A novel feeding strategy in fedbatch recombinant yeast fermentation was developed to achieve high plasmid stability and protein productivity for fermentation using low-cost rich (non-selective) media. In batch fermentations with a recombinant yeast, Saccharomyces cerevisiae, which carried the plasmid pSXR125 for the production of beta-galactosidase, it was found that the fraction of plasmid-carrying cells decreased during the exponential growth phase but increased during the stationary phase. This fraction increase in the stationary phase was attributed to the death rate difference between the plasmid-free and plasmid-carrying cells caused by glucose starvation in the stationary phase. Plasmid-free cells grew faster than plasmid-carrying cells when there were plenty of growth substrate, but they also lysed or died faster upon the depletion of the growth substrate. Thus, pulse additions of the growth substrate (glucose) at appropriate time intervals allowing for significant starvation period between two consecutive feedings during fedbatch fermentation should have positive effects on stabilizing plasmid and enhancing protein production. A selective medium was used to grow cells in the initial batch fermentation, which was then followed with pulse feeding of concentrated non-selective media in fedbatch fermentation. Both experimental data and model simulation show that the periodic glucose starvation feeding strategy can maintain a stable plasmid-carrying cell fraction and a stable specific productivity of the recombinant protein, even with a non-selective medium feed for a long operation period. On the contrary, without glucose starvation, the fraction of plasmid-carrying cells and the specific productivity continue to drop during the fedbatch fermentation, which would greatly reduce the product yield and limit the duration that the fermentation can be effectively operated. The new feeding strategy would allow the economic use of a rich, non-selective medium in high cell density recombinant fedbatch fermentation. This new feeding strategy can be easily implemented with a simple IBM-PC based control system, which monitors either glucose or cell concentration in the fermentation broth.     

Protease production by Bacillus subtilis in oxygen-controlled,glucose fed-batch fermentations

Summary An open-loop, on-off control system using the dissolved oxygen level to control a glucose feed was used in a study of growth and production of protease by Bacillus subtilis CNIB 8054. With this system, both glucose and oxygen were controlled at low concentrations. In batch fermentations, protease activity in the fermentation broth was maximum when growth had stopped. During oxygen-controlled, glucose fed-batch fermentations, growth and the production of protease activity continued during glucose feeding. Oxygen-controlled, glucose fed-batch fermentations produced more protease activity than batch fermentations, depending upon the set point for dissolved oxygen. These results indicate that control of glucose and oxygen concentrations can result in improvements in protease production.     

The role of amino acids in the amplification and quality of DNA vectors for industrial applications

In this study, we have demonstrated that the type and feeding regimen of amino acids have a significant impact on the quality as well as the quantity of DNA vectors produced. Nutrient pool and factorial design experiments were carried out in order to identify the amino acids involved in increased biomass and induction of plasmid amplification. Leucine, glycine, and histidine were responsible for increased biomass and leucine starvation in the presence of histidine was implicated in plasmid amplification. Supercoiling of the plasmid was optimized using a dual feeding strategy. As a result of this, a fed-batch fermentation strategy for the production of a 6.9 kb plasmid, pSVß, in Escherichia coli DH5α was developed. In batch fermentation, a maximum plasmid yield of 39.4 mg/L equivalent to 11.3 mg/g dry cell weight (DCW) was achieved with casein hydrolysate limitation. About 90% of plasmid was in the supercoiled (SC) form after 31 hr of fermentation but only remained so for a short period, leading to a very brief window for harvesting cells at scale. Subsequently, a fed-batch fermentation using a dual feeding strategy was employed. A mean maximum plasmid yield of 44 mg/L equivalent to 9.1 mg plasmid/g DCW was achieved. After 25 hr, 90% of plasmid was in the SC form and remained at this level for the remaining 10 hr of the fermentation, allowing adequate time for the harvesting of cells without the loss of supercoiling of product. This study emphasized that optimizing fermentation strategy and identifying the essential nutrients are beneficial for bioprocessing of plasmid DNA for therapeutic applications.     

Fed-batch microbioreactor platform for scale down and analysis of a plasmid DNA production process

The rising costs of bioprocess research and development emphasize the need for high-throughput, low-cost alternatives to bench-scale bioreactors for process development. In particular, there is a need for platforms that can go beyond simple batch growth of the organism of interest to include more advanced monitoring, control, and operation schemes such as fed-batch or continuous. We have developed a 1-mL microbioreactor capable of monitoring and control of dissolved oxygen, pH, and temperature. Optical density can also be measured online for continuous monitoring of cell growth. To test our microbioreactor platform, we used production of a plasmid DNA vaccine vector (pVAX1-GFP) in Escherichia coli via a fed-batch temperature-inducible process as a model system. We demonstrated that our platform can accurately predict growth, glycerol and acetate concentrations, as well as plasmid copy number and quality obtained in a bench-scale bioreactor. The predictive abilities of the micro-scale system were robust over a range of feed rates as long as key process parameters, such as dissolved oxygen, were kept constant across scales. We have highlighted plasmid DNA production as a potential application for our microbioreactor, but the device has broad utility for microbial process development in other industries as well.     

Control of fed-batch fermentations

Fed-batch fermentation is used to prevent or reduce substrate-associated growth inhibition by controlling nutrient supply. Here we review the advances in control of fed-batch fermentations. Simple exponential feeding and inferential methods are examined, as are newer methods based on fuzzy control and neural networks. Considerable interest has developed in these more advanced methods that hold promise for optimizing fed-batch techniques for complex fermentation systems.