Development of a novel assay for human tyrosyl DNA phosphodiesterase 2

Tyrosyl DNA phosphodiesterase 2 (TDP2), a newly discovered enzyme that cleaves 5′-phosphotyrosyl bonds, is a potential target for chemotherapy. TDP2 possesses both 3′- and 5′-tyrosyl-DNA phosphodiesterase activity, which is generally measured in a gel-based assay using 3′- and 5′-phosphotyrosyl linkage at the 3′ and 5′ ends of an oligonucleotide. To understand the enzymatic mechanism of this novel enzyme, the gel-based assay is useful, but this technique is cumbersome for TDP2 inhibitor screening. For this reason, we have designed a novel assay using p-nitrophenyl-thymidine-5′-phosphate (T5PNP) as a substrate. This assay can be used in continuous colorimetric assays in a 96-well format. We compared the salt and pH effect on product formation with the colorimetric and gel-based assays and showed that they behave similarly. Steady-state kinetic studies showed that the 5′ activity of TDP2 is 1000-fold more efficient than T5PNP. Tyrosyl DNA phosphodiesterase 1 (TDP1) and human AP-endonuclease 1 (APE1) could not hydrolyze T5PNP. Sodium orthovanadate, a known inhibitor of TDP2, inhibits product formation from T5PNP by TDP2 (IC₅₀ = 40 mM). Our results suggest that this novel assay system with this new TDP2 substrate can be used for inhibitor screening in a high-throughput manner.     

Highly sensitive and selective colorimetric genotyping of single-nucleotide polymorphisms based on enzyme-amplified ligation on magnetic beads

Herein we report a new strategy for highly sensitive and selective colorimatric assay for genotyping of single-nucleotide polymorphisms (SNPs). It is based on the use of a specific gap ligation reaction, horseradish peroxidase (HRP) for signal amplification, and magnetic beads for the easy separation of the ligated product. Briefly, oligonucleotide capture probe functionalized magnetic beads are first hybridized to a target DNA. Biotinylated oligonucleotide detection probes are then allowed to hybridize to the already captured target DNA. A subsequent ligation at the mutation point joins the two probes together. The introduction of streptavidin-conjugated HRP and a simple magnetic separation allow colorimetric genotyping of SNPs. The assay is able to discriminate one copy of mutant in 1000 copies of wild-type KRAS oncogene at 30 picomolar. The detection limit of the assay is further improved to 1 femtomolar by incorporating a ligation chain reaction amplification step, offering an excellent opportunity for the development of a simple and highly sensitive diagnostic tool.     

In situ DNA amplification with magnetic primers for the electrochemical detection of food pathogens

A sensitive and selective genomagnetic assay for the electrochemical detection of food pathogens based on in situ DNA amplification with magnetic primers has been designed. The performance of the genomagnetic assay was firstly demonstrated for a DNA synthetic target by its double-hybridization with both a digoxigenin probe and a biotinylated capture probe, and further binding to streptavidin-modified magnetic beads. The DNA sandwiched target bound on the magnetic beads is then separated by using a magneto electrode based on graphite-epoxy composite. The electrochemical detection is finally achieved by an enzyme marker, anti-digoxigenin horseradish peroxidase (HRP). The novel strategy was used for the rapid and sensitive detection of polymerase chain reaction (PCR) amplified samples. Promising resultants were also achieved for the DNA amplification directly performed on magnetic beads by using a novel magnetic primer, i.e., the up PCR primer bound to magnetic beads. Moreover, the magneto DNA biosensing assay was able to detect changes at single nucleotide polymorphism (SNP) level, when stringent hybridization conditions were used. The reliability of the assay was tested for Salmonella spp., the most important pathogen affecting food safety.     

Directed evolution of an extremely fast phosphotriesterase by in vitro compartmentalization

We describe the selection of a phosphotriesterase with a very fast k(cat) (over 10(5) s(-1)), 63 times higher than the already very efficient wild-type enzyme. The enzyme was selected from a library of 3.4 x 10(7) mutated phosphotriesterase genes using a novel strategy based on linking genotype and phenotype by in vitro compartmentalization (IVC) using water-in-oil emulsions. First, microbeads, each displaying a single gene and multiple copies of the encoded protein, are formed by compartmentalized in vitro translation. These microbeads can then be selected for catalysis or binding. To select for catalysis the microbeads are re-emulsified in a reaction buffer of choice with a soluble substrate. The product and any unreacted substrate are coupled to the beads when the reaction is finished. Product-coated beads, displaying active enzymes and the genes that encode them, are detected with anti-product antibodies and selected using flow cytometry. This completely in vitro process selects for all enzymatic features simultaneously (substrate recognition, product formation, rate acceleration and turnover) and single enzyme molecules can be detected.     

A rapid assay for epoxide hydratase activity with benzo(a)pyrene 4,5-(K-region-)oxide as substrate

A rapid radiometric assay for epoxide hydratase activity has been developed using the highly mutagenic [³H]benzo(a)pyrene 4,5-(K-region-)oxide as substrate. By addition of dimethylsulfoxide after the incubation, conditions were found where the unreacted substrate could be separated from the product benzo(a)pyrene-4,5-dihydrodiol(trans) simply by extraction into petroleum ether. The product is then extracted into ethyl acetate and, radioactivity is measured by scintillation spectrometry. This assay allows a rapid measurement of epoxide hydratase activity with an epoxide derived from a carcinogenic polycyclic hydrocarbon as substrate and is at the same time sensitive enough for accurate determination of epoxide hydratase activity in preparations with extremely low enzyme levels such as rat skin homogenate (8–14 pmol of product/mg of protein/min).     

Glucose oxidase as label in histological immunoassays with enzyme-amplification in a two-step technique: coimmobilized horseradish peroxidase as secondary system enzyme for chromogen oxidation

Summary A sensitive staining procedure for glucose oxidase (GOD) as marker in immunohistology is described. The cytochemical procedure involves a two-step enzyme method in which GOD and horseradish peroxidase (HRP) are coimmobilized onto the same cellular sites by immunological bridging or by the principle of avidin-biotin interaction. In this coupled enzyme technique, H₂O₂ generated during GOD reaction is the substrate for HRP and is utilized for the oxidation of chromogens such as 3,3-diaminobenzidine or 3-amino-9-ethylcarbazole. Due to the immobilization of the capture enzyme HRP in close proximity to the marker enzyme (GOD), more intense and specific staining is produced than can be obtained with soluble HRP as coupling enzyme in the substrate medium. Indirect antibody labelled and antibody bridge techniques including the avidin (streptavidin)-biotin principle have proven the usefulness of this GOD labelling procedure for antigen localization in paraffin sections. Antigens such as IgA in tonsil, alpha-feroprotein in liver and tissue polypeptide antigen in mainmary gland served as models. The immobilized twostep enzyme procedures have the same order of sensitivity and specificity as comparable immunoperoxidase methods. The coupled GOD-HRP principle can be superior to conventional immunoperoxidase labelling for the localization of biomolecules in tissue preparations rich in endogenous peroxidase activities.     

Assay of glycoamidases and endo-beta-N-acetylglucosaminidases by lectin capture and dissociation-enhanced lanthanide fluorescence immunoassay

We have developed an assay system for endo-beta-N-acetylglucosaminidase and glycoamidase (PNGase), using Eu(3+)-labeled Man(9)GlcNAc(2) glycopeptides as substrates in combination with lectin capture. Two glycopeptides of different peptide lengths, derived from soybean agglutinin, were labeled with Eu(3+) via a diethylenetriaminepentaacetate (DTPA) chelating linker and served as substrates for two types of enzymes: one with (Man(9)GlcNAc(2))Asn for endo-beta-N-acetylglucosaminidase and the other with Ala-Ser-Phe-(Man(9)GlcNAc(2))Asn-Phe-Thr for glycoamidase activities. Following enzymatic hydrolysis, concanavalin A, immobilized or soluble, was added to the mixture to bind unreacted substrate and unlabeled hydrolysis product. The labeled peptide product could then be separated from the lectin-bound complexes by filtration for quantification by dissociation-enhanced lanthanide fluorescence immunoassay. Activities as low as 2 fmol min(-1) could be rapidly quantified for both types of enzymes, and enzymological parameters could be determined within minutes. Applicability of the assay was tested for identification of a glycoamidase activity peak in the fractionation of sweet almond emulsin, a classic example. This assay offers sensitivity, ease of use, and high throughput. In addition, it is versatile and should be applicable to other glycobiology enzyme systems.     

Development of a near-infrared fluorescence ELISA method using tyramide signal amplification

In this study, we applied tyramide signal amplification (TSA) to fluorescence enzyme-linked immunosorbent assay (ELISA) employing horseradish peroxidase (HRP) as the detection enzyme. When used with a human epidermal growth factor ELISA kit, the TSA method led to a >100-fold increase in fluorescence signal intensity in comparison to an unamplified method. It also showed wider dynamic range and better sensitivity compared to a conventional method using tetramethylbenzidine as the HRP substrate.     

Removal of pentachlorophenol by immobilized horseradish peroxidase

Researches on the polymerization of aqueous pentachlorophenol (PCP) by the catalysis of horseradish peroxidase (HRP) with the existence of hydrogen peroxide (H₂O₂) were conducted. Factors, such as acidity, temperature, enzyme activity, and initial concentration of PCP and H₂O₂ that could influence the degradation were studied. Results showed that the optimum pH value for free enzyme was 5–6; relative higher temperature could accelerate the reaction greatly; PCP removal increased with an increase of enzyme concentration, and PCP (initial concentration 12.6 mg/L) removal percentage could reach nearly 70% under the highest enzyme concentration (about 0.05 u/ml) adopted in the experiment; removal percentage increased slightly with an increase of initial concentration of PCP, and when initial PCP concentrations were 13.0 and 0.7 mg/L, the removal percentages were about 73.7% and 35.7%, respectively; the molar ratio of the reaction between PCP and H₂O₂ was about 1:2.Based on the above results, researches on the removal of PCP by the immobilized HRP were conducted. The free HRP was immobilized on the polyacrylamide gel prepared by gamma-ray radiation method; then the immobilized HRP was filled into a column, and PCP was successfully removed by the immobilized HRP column. The results were compared with results using free HRP enzyme, which showed that the optimum pH value for the immobilized HRP is similar to that for the free HRP, and when pH=5.15, the immobilized HRP could reduce PCP with initial concentration 13.4 mg/L to the concentration of 4.9 mg/L within 1 h, and the immobilized HRP column could be used to repeatedly.     

The use of diaminobenzidine for spectrophotometric and acrylamide gel detection of sulfite oxidase and its applicability to hydrogen peroxide-generating enzymes

DAB, in the presence of HRP, sulfite oxidase and FBS, polymerizes to a product with an absorption difference maximum at 352 nm. This reaction has been used as a sensitive and specific spectrophotometric assay for sulfite oxidase. Incubation of acrylamide gels containing sulfite oxidase with assay mixtures produces an insoluble product which precipitates where the enzyme is localized. This stain is at least as sensitive as the amido black protein stain and its specificity is such that no band is seen in the absence of substrate, and that only one band, migrating identically to purified enzyme is seen in rat liver homogenates. This polymerization reaction has been applied to other H₂O₂-generating enzymes and can be used to demonstrate the presence of these enzymes in the midst of other oxidases. DAB polymerization provides a sensitive spectrophotometric assay which can be used with either ultraviolet or visible optics. The application of this procedure to modified enzymes is discussed.     

On-line chromatographic screening of matrix metalloproteinase inhibitors using immobilized MMP-9 enzyme reactor

Matrix metalloproteinase 9 (MMP-9) plays an important role in cancer invasion and metastasis and has been an attractive target for therapeutic intervention of cancer metastasis. However, considering the high cost and intricacy associated with the expression, isolation and purification of the recombinant enzyme for the screening of drug candidates, alternative methods that explore the recycling of enzymes become desirable. In this study, a new immobilized enzyme reactor (IMER) containing human recombinant MMP-9 enzyme was developed and characterized for the on-line screening of MMP-9 inhibitors. The MMP-9 IMER containing active unit of the enzyme (U = 0.08 μmol/min) on the disk was inserted into a HPLC system connected to a UV–vis detector for on-line chromatographic screening. The resulting conjugated enzyme was shown to be an active and stable catalyst for the hydrolysis of MMP-9 chromogenic thiopeptide substrate Ac-PLG-[2-mercapto-4-methyl-pentanoyl]-LG-OC₂H₅. The kinetics profile of the enzyme in IMER and free solution were determined and compared. Selected reversible MMP inhibitors, N-isobutyl-N-(4-methoxyphenylsulfonyl)-glycyl hydroxamic acid (NNGH), doxycycline and minocycline were further characterized using the MMP-9 IMER and free enzyme solution assays. Our system demonstrated applicability as a rapid and cost-effective screening tool for inhibitors of the MMP-9 enzyme.     

Electrochemical measurement of DNA hybridization using nanosilver as label and horseradish peroxidase as enhancer

A simple and sensitive electrochemical DNA biosensor based on in situ DNA amplification with nanosilver as label and horseradish peroxide (HRP) as enhancer has been designed. The thiolated oligomer single-stranded DNA (ssDNA) was initially directly immobilized on a gold electrode, and quartz crystal microbalance (QCM) gave the specific amount of ssDNA adsorption of 6.3 ± 0.1 ng/cm². With a competitive format, hybridization reaction was carried out via immersing the DNA biosensor into a stirred hybridization solution containing different concentrations of the complementary ssDNA and constant concentration of nanosilver-labeled ssDNA, and then further binding with HRP. The adsorbed HRP amount on the probe surface decreased with the increment of the target ssDNA in the sample. The hybridization events were monitored by using differential pulse voltammetry (DPV) with the adsorbed HRP toward the reduction of H₂O₂. The reduction current from the enzyme-generated product was related to the number of target ssDNA molecules in the sample. A detection of 15 pmol/L for target ssDNA was obtained with the electrochemical DNA biosensor. Additionally, the developed approach can effectively discriminate complementary from non-complementary DNA sequence, suggesting that the similar enzyme-labeled DNA assay method hold great promises for sensitive electrochemical biosensor applications.     

Development of a homogeneous immunoassay for the detection of angiotensin I in plasma using AlphaLISA acceptor beads technology

Plasma renin activity (PRA) is a well-established biomarker for assessing the efficacy of various antihypertensive agents such as direct renin inhibitors, angiotensin receptor blockers, and angiotensin-converting enzyme inhibitors (ACEIs). PRA measurements are obtained through the detection and quantification of angiotensin I (Ang I) produced by the action of renin on its natural substrate angiotensinogen. The most accepted and reproducible method for PRA measurement uses an antibody capture Ang I methodology that employs specific antibodies that recognize and protect Ang I against angiotensinase activities contained in plasma. The amount of Ang I is then quantified by either radioimmunoassay (RIA) or enzyme immunoassay (EIA). In the current report, we describe the optimization of a novel homogeneous immunoassay based on the AlphaScreen technology for the detection and quantification of antibody-captured Ang I using AlphaLISA acceptor beads in buffer and in the plasma of various species (human, rat, and mouse). Ex vivo measurements of renin activity were performed using 10 μl or less of a reaction mixture, and concentrations as low as 1 nM Ang I were quantified. Titration curves obtained for the quantification of Ang I in buffer and plasma gave similar EC₅₀ values of 5.6 and 14.4 nM, respectively. Both matrices generated an equivalent dynamic range that varies from approximately 1 to 50 nM. Renin inhibitors have been successfully titrated and IC₅₀ values obtained correlated well with those obtained using EIA methodology (r² = 0.80). This assay is sensitive, robust, fast, and less tedious than measurements performed using nonhomogeneous EIA. The AlphaLISA methodology is homogeneous, does not require wash steps prior to the addition of reagents, and does not generate radioactive waste.     

Chemiluminescent assay of β-D-galactosidase based on indole luminescence

We developed a novel chemiluminescent assay of β-D -galactosidase (β-gal) based on the chemiluminescence of indole. 5-Bromo-4-chloro-3-indolyl-β-D -galactopyranoside (X-gal) was used as a substrate for β-gal and also as a light emitter. X-gal was hydrolysed by β-gal to liberate free indoxyl, followed by oxidation to indigo dye, and simultaneously produces hydrogen peroxide (H₂O₂). H₂O₂ reacts with the residual X-gal in the presence of horseradish peroxidase (HRP) to emit light. The measurable range of β-gal obtained by this method was 6 × 10⁻¹⁴ mol/L to 6 × 10⁻¹¹ mol/L; the detection limit was 3 amol/assay. This chemiluminescent assay could be applied to an enzyme immunoassay of thyroxine using β-gal as the enzyme label. © 1998 John Wiley & Sons, Ltd.     

Phospholipase A2 activity of post-heparin plasma: A rapid and sensitive assay and partial characterization

A simple, rapid, and sensitive assay for phospholipase A₂ in post-heparin plasma that uses commercially available l-α-dipalmitoyl-(2-[1-¹⁴C]palmitoyl) phosphatidylcholine is described. The incubation mixture, containing the enzyme substrate and products, is extracted with a two-phase heptane-isopropyl alcohol-aqueous sulfuric acid system, and the labeled fatty acid in the heptane phase is separated by the absorption of unreacted substrate on silicic acid. The heptane phase, containing the labeled fatty acid, is counted after the addition of commercial liquid scintillation fluid. Phospholipase A₂ activity determined by this method agrees well with the data obtained by an earlier published method. The enzyme assay is faster and more sensitive than previously published procedures and is sensitive to levels as low as 1 nmol palmitate/h/200 μl of plasma. The enzyme activity could not be found in plasma obtained prior to the injection of heparin. Plasma phospholipase A₂ is thermolabile, and the enzyme activity is enhanced by 2 mm sodium deoxycholate and calcium chloride, and inhibited by EDTA.     

Characterization of cytidylyltransferase enzyme activity through high performance liquid chromatography

The cytidylyltransferases are a family of enzymes that utilize cytidine 5′-triphosphate (CTP) to synthesize molecules that are typically precursors to membrane phospholipids. The most extensively studied cytidylyltransferase is CTP:phosphocholine cytidylyltransferase (CCT), which catalyzes conversion of phosphocholine and CTP to cytidine diphosphocholine (CDP-choline), a step critical for synthesis of the membrane phospholipid phosphatidylcholine (PC). The current method used to determine catalytic activity of CCT measures production of radiolabeled CDP-choline from ¹⁴C-labeled phosphocholine. The goal of this research was to develop a CCT enzyme assay that employed separation of non-radioactive CDP-choline from CTP. A C18 reverse phase column with a mobile phase of 0.1 M ammonium bicarbonate (98%) and acetonitrile (2%) (pH 7.4) resulted in separation of solutions of the substrate CTP from the product CDP-choline. A previously characterized truncated version of rat CCTα (denoted CCTα236) was used to test the HPLC enzyme assay by measuring CDP-choline product formation. The V_max for CCTα236 was 3850 nmol/min/mg and K_0.5 values for CTP and phosphocholine were 4.07 mM and 2.49 mM, respectively. The HPLC method was applied to glycerol 3-phosphate cytidylyltransferase (GCT) and CTP:2-C-methyl-D-erythritol-4-phosphate cytidylyltransferase synthetase (CMS), members of the cytidylyltransferase family that produce CDP-glycerol and CDP-methylerythritol, respectively.     

2′,3′-cAMP hydrolysis by metal-dependent phosphodiesterases containing DHH, EAL, and HD domains is non-specific: Implications for PDE screening

The recent report of 2′,3′-cAMP isolated from rat kidney is the first proof of its biological existence, which revived interest in this mysterious molecule. 2′,3′-cAMP serves as an extracellular adenosine source, but how it is degraded remains unclear. Here, we report that 2′,3′-cAMP can be hydrolyzed by six phosphodiesterases containing three different families of hydrolytic domains, generating invariably 3′-AMP but not 2′-AMP. The catalytic efficiency (k_cat/K_m) of each enzyme against 2′,3′-cAMP correlates with that against the widely used non-specific substrate bis(p-nitrophenyl)phosphate (bis-pNPP), indicating that 2′,3′-cAMP is a previously unknown non-specific substrate for PDEs. Furthermore, we show that the exclusive formation of 3′-AMP is due to the P-O2′ bond having lower activation energy and is not the result of steric exclusion at enzyme active site. Our analysis provides mechanistic basis to dissect protein function when 2′,3′-cAMP hydrolysis is observed.     

Primary enzyme quantitation using substrates labeled with a second indicator enzyme. I. Elastase determination using peroxidase-labeled elastin

Quantitation of proteolytic enzyme concentration can be accomplished by measuring the release, due to primary enzyme catalysis, of a second enzyme bound to a particulate substrate. As the primary enzyme acts on the substrate, release of the indicator enzyme into the surrounding medium occurs, which in turn can be quantitated colorimetrically, and under suitable reaction conditions the amount of indicator enzyme released is directly proportional to the amount of primary enzyme present. A specific example of such an assay is that for elastolytic activity using powdered elastin labeled with horseradish peroxidase. The detection sensitivity of the system described is 1 ng/ml of pancreatic elastase, and the dynamic range of the assay is 2 orders of magnitude. The reaction time for optimal elastase detection sensitivity is 3 h. For the assay, horseradish peroxidase is coupled to insoluble elastin. Labeled elastin is incubated with varying amounts of pancreatic elastase. The elastase in the test sample solubilizes the elastin and the horseradish peroxidase bound to it. The amount of peroxidase released is then quantified using the colorimetic reaction produced by catalysis of 2,2′-azino-di-(3-ethyl-benzthiazoline-6-sulfonate)-H₂O₂. For a fixed, nonsaturating concentration of elastase, the amount of peroxidase released is proportional to the elastase concentration.     

Immobilization of Horseradish Peroxidase on Multi-Wall Carbon Nanotubes and its Electrochemical Properties

Horseradish peroxidase (HRP) was immobilized on carboxylated multi-wall carbon nanotubes in the presence of a coupling reagent, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The immobilized HRP maintained its oxidative activity for guaiacol over a broad range of pH values (4–9). An electrode of graphite rod, 6 mm diam. was fabricated using the immobilized HRP. Cyclic voltammetry of the enzyme electrode confirmed electron transfer between the immobilized HRP and the electrode in the presence of H₂O₂ but without an added mediator or a reducing substrate.     

Fluorometric assay for tissue transglutaminase-mediated transamidation activity

Herein, we report the development of a direct discontinuous fluorometric transamidation assay for determining tissue transglutaminase (TG2) activity. In the assay reaction, TG2 catalyzes the formation of a biotin-fluorophore conjugate, using a fluorescent, high affinity γ-glutamyl donor substrate and a biotinylated amine as a γ-glutamyl acceptor substrate. After the reaction, the conjugate is fixed on streptavidin-coated beads and excess substrate is washed away, allowing the transamidation activity to be quantified by fluorescence measurement. This method was used to detect the activity of as little as 0.6 mU of purified TG2, and can be used for detection of activity from crude cellular lysates. Furthermore, this assay can be used for screening potential inhibitors and synthetic substrates, the latter of which was demonstrated herein.