Isothermal titration calorimetry uncovers substrate promiscuity of bicupin oxalate oxidase from Ceriporiopsis subvermispora

Isothermal titration calorimetry (ITC) may be used to determine the kinetic parameters of enzyme-catalyzed reactions when neither products nor reactants are spectrophotometrically visible and when the reaction products are unknown. We report here the use of the multiple injection method of ITC to characterize the catalytic properties of oxalate oxidase (OxOx) from Ceriporiopsis subvermispora (CsOxOx), a manganese dependent enzyme that catalyzes the oxygen-dependent oxidation of oxalate to carbon dioxide in a reaction coupled with the formation of hydrogen peroxide. CsOxOx is the first bicupin enzyme identified that catalyzes this reaction. The multiple injection ITC method of measuring OxOx activity involves continuous, real-time detection of the amount of heat generated (dQ) during catalysis, which is equal to the number of moles of product produced times the enthalpy of the reaction (ΔH_app). Steady-state kinetic constants using oxalate as the substrate determined by multiple injection ITC are comparable to those obtained by a continuous spectrophotometric assay in which H₂O₂ production is coupled to the horseradish peroxidase-catalyzed oxidation of 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulfonic acid) and by membrane inlet mass spectrometry. Additionally, we used multiple injection ITC to identify mesoxalate as a substrate for the CsOxOx-catalyzed reaction, with a kinetic parameters comparable to that of oxalate, and to identify a number of small molecule carboxylic acid compounds that also serve as substrates for the enzyme.     

Kinetic mechanism and catalysis of Trypanosoma cruzi dihydroorotate dehydrogenase enzyme evaluated by isothermal titration calorimetry

Trypanosoma cruzi dihydroorotate dehydrogenase (TcDHODH) catalyzes the oxidation of l-dihydroorotate to orotate with concomitant reduction of fumarate to succinate in the de novo pyrimidine biosynthetic pathway. Based on the important need to characterize catalytic mechanism of TcDHODH, we have tailored a protocol to measure TcDHODH kinetic parameters based on isothermal titration calorimetry. Enzymatic assays lead to Michaelis-Menten curves that enable the Michaelis constant (K_M) and maximum velocity (V_max) for both of the TcDHODH substrates: dihydroorotate (K_M = 8.6 ± 2.6 μM and V_max = 4.1 ± 0.7 μM s^-1) and fumarate (K_M = 120 ± 9 μM and V_max = 6.71 ± 0.15 μM s^-1). TcDHODH activity was investigated using dimethyl sulfoxide (10%, v/v) and Triton X-100 (0.5%, v/v), which seem to facilitate the substrate binding process with a small decrease in K_M. Arrhenius plot analysis allowed the determination of thermodynamic parameters of activation for substrates and gave some insights into the enzyme mechanism. Activation entropy was the main contributor to the Gibbs free energy in the formation of the transition state. A factor that might contribute to the unfavorable entropy is the hindered access of substrates to the TcDHODH active site where a loop at its entrance regulates the open-close channel for substrate access.     

Kinetics of trypsin-catalyzed hydrolysis determined by isothermal titration calorimetry

Isothermal titration calorimetry (ITC) was applied to determine enzymatic activity and inhibition. We measured the Michaelis–Menten kinetics for trypsin-catalyzed hydrolysis of two substrates, casein (an insoluble macromolecule substrate) and Nα-benzoyl-dl-arginine β-naphthylamide (a small substrate), and estimated the thermodynamic parameters in the temperature range from 20 to 37 °C. The inhibitory activities of reversible (small molecule benzamidine) and irreversible (small molecule phenylmethanesulfonyl fluoride and macromolecule α1-antitrypsin) inhibitors of trypsin were also determined. We showed the usefulness of ITC for fast and direct measurement of inhibition constants and half-maximal inhibitory concentrations and for predictions of the mechanism of inhibition. ITC kinetic assays could be an easy and straightforward way to estimate Michaelis–Menten constants and the effectiveness of inhibitors as well as to predict the inhibition mechanism. ITC efficiency was found to be similar to that of classical spectrophotometric enzymatic assays.     

A simple method for the determination of individual rate constants for substrate hydrolysis by serine proteases

A simple method is presented for the determination of individual rate constants for substrate hydrolysis by serine proteases and other enzymes with similar catalytic mechanism. The method does not require solvent perturbation like viscosity changes, or solvent isotope effects, that often compromise nonspecifically the activity of substrate and enzyme. The rates of substrate diffusion into the active site (k1), substrate dissociation (k-1), acylation (k2), and deacylation (k3) in the accepted mechanism of substrate hydrolysis by serine proteases are derived from the temperature dependence of the Michaelis-Menten parameters kcat/Km and kcat. The method also yields the activation energies for these molecular events. Application to wild-type and mutant thrombins reveals how the various steps of the catalytic mechanism are affected by Na+-binding and site-directed mutations of the important residues Y225 in the Na+ binding environment and L99 in the S2 specificity site. Extension of this method to other proteases should enable the derivation of detailed information on the kinetic and energetic determinants of protease function.     

Enzymatic activity of immobilized enzyme determined by isothermal titration calorimetry

The activity of adsorbed β-glucosidase onto spherical polyelectrolyte brushes (SPBs) is investigated by UV-Vis spectroscopy and isothermal titration calorimetry (ITC). By comparing the results of these two methods, we demonstrate that ITC is a precise method for the study of the activity of immobilized enzymes. The carrier particles used for immobilization here consist of a polystyrene core onto which poly(acrylic acid) chains are grafted. High amounts of enzyme can be immobilized in the brush layer at low ionic strength by the polyelectrolyte-mediated protein adsorption (PMPA). Analysis of the activity of β-glucosidase was done in terms of Michaelis-Menten kinetics. Moreover, the enzymatic activity of immobilized enzyme is studied by ITC using cellobiose as substrate. All data show that ITC is a general method for the study of the activity of immobilized enzymes.     

Simultaneous determination of equilibrium constants and enthalpy changes by titration calorimetry: Methods, instruments, and uncertainties

Calorimetric methods have been used to determine equilibrium constants since 1937, but no comprehensive review of the various calorimeters and methods has been done previously. This article reports methods for quantitative comparison of the capabilities of calorimeters for simultaneous determination of equilibrium constants and enthalpy changes, for determining optimal experimental conditions, and for assessing the effects of systematic and random errors on the accuracy and precision of equilibrium constants and enthalpy changes determined by this method.     

Determination of equilibrium and individual rate constants for subtilisin-catalyzed transesterification in anhydrous environments

We report here the first determinations of individual rate constants and equilibrium constants for enzymatic reactions in essentially anhydrous organic solvents. Using the added nucleophile method we have measured the effect of changing solvent on the binding and catalytic steps for subtilisin-catalyzed transesterification of N-protected amino acid esters. The detailed information generated indicates that once the substrate has bound to the enzyme, the catalytic machinery can work at rates equivalent to those in water. The decreased overall rates for subtilisin suspended in anhydrous solvents are merely the result of extremely high values for K(s), in most cases, coupled with low concentrations of nucleophile ( approximately 1.0M in organic solvents, and 55M in water). The method described, which is generally applicable, and straightforward experimentally, will, we believe, enable a clearer understanding of how changing solvent can predictably affect the activity and specificity of the enzyme. (c) 1992 John Wiley & Sons, Inc.     

Investigation of the enzymatic activity of the Na,K-ATPase via isothermal titration microcalorimetry

Isothermal titration microcalorimetry (ITC) is shown here to be a sensitive and accurate method for assaying the steady-state enzyme activity of the Na⁺,K⁺-ATPase. Single ATP injection experiments yield an apparent enthalpy change for the ATP hydrolysis reaction catalyzed by the enzyme of −51 (± 1) kJ mol⁻¹. This value is independent of the amount of ADP accumulated in the sample cell, which indicates that under the experimental conditions studied here (saturating Na⁺ and K⁺ concentrations) ADP does not inhibit enzyme activity by reversal of the phosphorylation reaction and resynthesizing ATP. Multiple ATP injection titration experiments in which varying concentrations of ADP were initially included in the sample cell could be adequately explained by a Michaelis-Menten kinetic model incorporating noncompetitive inhibition. This suggests that ADP inhibits the enzyme by binding to more than one enzyme intermediate and inhibiting forward reactions of the enzyme. Values of K_m and K_I obtained for the fits agree with literature values obtained by other methods. Because ITC is a direct method of continually monitoring enzyme activity, it is a valuable supplement to less direct or noncontinuous methods such as colorimetric, enzyme-coupled or radioactivity-based assays.     

Kinetics of the H-ATPase in chromatophores from Rhodospirillum rubrum: Effect of the electrical transmembrane potential on the rate constants

The effect of the electrical potential on the H⁺-ATPase of Rhodospirillum rubrum is examined. It is shown that the forward reaction rate (ATP synthesis) is increased by a factor of 10 during illumination while the reversed rate is only slightly decreased. This indicates that the electrical potential across the membrane affects the rate constants mainly by increasing the forward rate constants rather than decreasing the reversed rate constants in order to go from net hydrolysis to net synthesis.     

The role of Asn-212 in the catalytic mechanism of human endonuclease APE1: Stopped-flow kinetic study of incision activity on a natural AP site and a tetrahydrofuran analogue

Mammalian AP endonuclease 1 is a pivotal enzyme of the base excision repair pathway acting on apurinic/apyrimidinic sites. Previous structural and biochemical studies showed that the conserved Asn-212 residue is important for the enzymatic activity of APE1. Here, we report a comprehensive pre-steady-state kinetic analysis of two APE1 mutants, each containing amino acid substitutions at position 212, to ascertain the role of Asn-212 in individual steps of the APE1 catalytic mechanism. We applied the stopped-flow technique for detection of conformational transitions in the mutant proteins and DNA substrates during the catalytic cycle, using fluorophores that are sensitive to the micro-environment. Our data indicate that Asn-212 substitution by Asp reduces the rate of the incision step by ∼550-fold, while Ala substitution results in ∼70,000-fold decrease. Analysis of the binding steps revealed that both mutants continued to rapidly and efficiently bind to abasic DNA containing the natural AP site or its tetrahydrofuran analogue (F). Moreover, transient kinetic analysis showed that N212A APE1 possessed a higher binding rate and a higher affinity for specific substrates compared to N212D APE1. Molecular dynamics (MD) simulation revealed a significant dislocation of the key catalytic residues of both mutant proteins relative to wild-type APE1. The analysis of the model structure of N212D APE1 provides evidence for alternate hydrogen bonding between Asn-212 and Asp-210 residues, whereas N212A possesses an extended active site pocket due to Asn removal. Taken together, these biochemical and MD simulation results indicate that Asn-212 is essential for abasic DNA incision, but is not crucial for effective recognition/binding.     

Label‐free determination of protein–ligand binding constants using mass spectrometry and validation using surface plasmon resonance and isothermal titration calorimetry

We performed a systematic comparison of three label‐free methods for quantitative assessment of binding strengths of proteins interacting with small molecule ligands. The performance of (1) nanoelectrospray ionization mass spectrometry (nESI‐MS), (2) surface plasmon resonance (SPR), and (3) isothermal titration calorimetry (ITC) was compared for the determination of dissociation constants (K_D). The model system studied for this purpose was the human carbonic anhydrase I (hCAI) with eight known and well characterized sulfonamide inhibitors (Krishnamurthy et al., Chem. Rev. 2008, 108: 946–1051). The binding affinities of the inhibitors chosen vary by more than four orders of magnitude e.g., the K_D value determined for ethoxzolamide by nESI‐MS was 5 ± 1 nM and the K_D value for sulfanilamide was 145.7 ± 10.0 µM. The agreement of the determined K_D values by the three methods investigated was excellent for ethoxzolamide and benzenesulfonamide (variation with experimental error), good for acetazolamide and 4‐carboxybenzenesulfonamide (variation by ～ one order of magnitude), but poor for others e.g., sulpiride. The accuracies of the K_D values are determined, and advantages and drawbacks of the individual methods are discussed. Moreover, we critically evaluate the three examined methods in terms of ease of the measurement, sample consumption, time requirement, and discuss their limitations. Copyright © 2009 John Wiley & Sons, Ltd.     

Kinetic and thermodynamic characterization of the functional properties of a hybrid versatile peroxidase using isothermal titration calorimetry: Insight into manganese peroxidase activation and lignin peroxidase inhibition

Isothermal titration calorimetry (ITC) was developed for measuring lignin peroxidase (LiP) and manganese peroxidase (MnP) activities of versatile peroxidase (VP) from Bjerkandera adusta. Developing an ITC approach provided an alternative to colorimetric methods that enabled reaction kinetics to be accurately determined. Although VP from Bjerkandera adjusta is a hybrid enzyme, specific conditions of [Mn+2] and pH were defined that limited activity to either LiP or MnP activities, or enabled both to be active simultaneously. MnP activity was found to be more efficient than LiP activity, with activity increasing with increasing concentrations of Mn+2. These properties of MnP were explained by a second metal binding site involved in homotropic substrate (Mn+2) activation. The activation of MnP was also accompanied by a decrease in both activation energy and substrate (Mn) affinity, reflecting a flexible enzyme structure. In contrast to MnP activity, LiP activity was inhibited by high dye (substrate) concentrations arising from uncompetitive substrate inhibition caused by substrate binding to a site distinct from the catalytic site. Our study provides a new level of understanding about the mechanism of substrate regulation of catalysis in VP from B. adjusta, providing insight into a class of enzyme, hybrid class II peroxidases, for which little experimental data is available.     

Mechanism and rate constants of the Cdc42 GTPase binding with intrinsically disordered effectors

Intrinsically disordered proteins (IDPs) are often involved in signaling and regulatory functions, through binding to cellular targets. Many IDPs undergo disorder‐to‐order transitions upon binding. Both the binding mechanisms and the magnitudes of the binding rate constants can have functional importance. Previously we have found that the coupled binding and folding of any IDP generally follows a sequential mechanism that we term dock‐and‐coalesce, whereby one segment of the IDP first docks to its subsite on the target surface and the remaining segments subsequently coalesce around their respective subsites. Here we applied our TransComp method within the framework of the dock‐and‐coalesce mechanism to dissect the binding kinetics of two Rho‐family GTPases, Cdc42 and TC10, with two intrinsically disordered effectors, WASP and Pak1. TransComp calculations identified the basic regions preceding the GTPase binding domains (GBDs) of the effectors as the docking segment. For Cdc42 binding with both WASP and Pak1, the calculated docking rate constants are close to the observed overall binding rate constants, suggesting that basic‐region docking is the rate‐limiting step and subsequent conformational coalescence of the GBDs on the Cdc42 surface is fast. The possibility that conformational coalescence of the WASP GBD on the TC10 surface is slow warrants further experimental investigation. The account for the differences in binding rate constants among the three GTPase‐effector systems and mutational effects therein yields deep physical and mechanistic insight into the binding processes. Our approach may guide the selection of mutations that lead to redesigned binding pathways. Proteins 2016; 84:674–685. © 2016 Wiley Periodicals, Inc.     

Effects of detergents on catalytic activity of human endometase/matrilysin 2, a putative cancer biomarker

Matrix metalloproteinases (MMPs) are a family of hydrolytic enzymes that play significant roles in development, morphogenesis, inflammation, and cancer invasion. Endometase (matrilysin 2 or MMP-26) is a putative early biomarker for human carcinomas. The effects of the ionic and nonionic detergents on catalytic activity of endometase were investigated. The hydrolytic activity of endometase was detergent concentration dependent, exhibiting a bell-shaped curve with its maximum activity near the critical micelle concentration (CMC) of nonionic detergents tested. The effect of Brij-35 on human gelatinase B (MMP-9), matrilysin (MMP-7), and membrane-type 1 MMP (MT1-MMP) was further explored. Their maximum catalysis was observed near the CMC of Brij-35 (∼ 90 μM). Their IC₅₀ values were above the CMC. The inhibition mechanism of MMP-7, MMP-9, and MT1-MMP by Brij-35 was a mixed type as determined by Dixon’s plot; however, the inhibition mechanism of endometase was noncompetitive with a K_i value of 240 μM. The catalytic activities of MMPs are influenced by detergents. Monomer of detergents may activate and stabilize MMPs to enhance catalysis, but micelle of detergents may sequester enzyme and block the substrate binding site to impede catalysis. Under physiological conditions, a lipid or membrane microenvironment may regulate enzymatic activity.     

Kinetic Behavior of Native Alkaline Phosphatase from Human Placenta

The kinetic behavior of human placental alkaline phosphatase, which catalyses the hydrolysis of p-nitrophenyl and of o-carboxyphenyl phosphates, was studied by means of graphical and non-linear regression statistical fitting analysis of data of rate versus substrate concentration. Non linear Lineweaver-Burk and Eadie-Hofstee plots and rational functions of degree 2:2 (F-test assessing the goodness of fit) show non-Michaelian kinetic behavior. In the same way, the behavior of the enzyme was also non-Michaelian in the simultaneous presence of these two substrates.

Norlaudanosoline is a key intermediate in the biosynthesis of the benzylisoquinoline alkaloids providing the benzyl-isoquinoline portion of the morphinan skeleton. This study examines a coupled reaction system for the production of norlaudanosoline from dopamine. In this coupled system, dopamine is enzymatically converted by monoamine oxidase (MAO) to 3,4-dihydroxyphenylacetaldehyde (dopaldehyde). In the presence of dopamine, this aldehyde undergoes a spontaneous Pictet-Spengler condensation to form norlaudanosoline. Three potential sources of MAO were investigated: a fungal source (Aspergillus niger), a bacterial source (Sarcina lutea) and a commercial source isolated from bovine plasma. Kinetic studies with dopamine as the substrate gave Michaelis constants (K_m) of 1.81 × 10^-5 M, 6.94 × 10^-3, and 1.61 × 10^-3 M for A. niger, S. lutea and bovine plasma oxidase, respectively. The reaction system is complicated because of the effect of the condensation reaction, so a more rigorous model was developed to account for this effect. The model was suitable for showing the effect of dopamine concentration on norlaudanosoline production alghough there were some model inadequacies. Using the model a forward rate constant for the Pictet-Spengler condensation was determined to be 6.8 × 10^-2 M^-1 s^-1 and the reverse reaction appears to be negligible. Overall conversion was 14% which is 20 times that achieved in an in situ reaction system using whole cells of Aspergillus niger.     

Substrate specificity and kinetic mechanism of purine nucleoside phosphorylase from Mycobacterium tuberculosis

Purine nucleoside phosphorylase from Mycobacterium tuberculosis (MtPNP) is numbered among targets for persistence of the causative agent of tuberculosis. Here, it is shown that MtPNP is more specific to natural 6-oxopurine nucleosides and synthetic compounds, and does not catalyze the phosphorolysis of adenosine. Initial velocity, product inhibition and equilibrium binding data suggest that MtPNP catalyzes 2′-deoxyguanosine (2dGuo) phosphorolysis by a steady-state ordered bi bi kinetic mechanism, in which inorganic phosphate (P_i) binds first followed by 2dGuo, and ribose 1-phosphate dissociates first followed by guanine. pH-rate profiles indicated a general acid as being essential for both catalysis and 2dGuo binding, and that deprotonation of a group abolishes P_i binding. Proton inventory and solvent deuterium isotope effects indicate that a single solvent proton transfer makes a modest contribution to the rate-limiting step. Pre-steady-state kinetic data indicate that product release appears to contribute to the rate-limiting step for MtPNP-catalyzed reaction.