CdTe Quantum Dots Enhance Feasibility of EvaGreen-Based Real-Time PCR with Decent Amplification Fidelity

Quantitative real-time PCR (qPCR), as an important quantitative technique for nucleic acids, has been widely used in many fields including clinical diagnosis, molecular biology, and cancer research. However, non-specific amplification products are still a frequent problem in qPCR. In this study, we investigated the effects of QDs on real-time amplification based on either SYBR Green I or EvaGreen. It was found that QDs could raise the amplification sensitivity and thus enhance the efficiency using SYBR Green I detection system. In the case of EvaGreen detection systems, addition of QDs also led to a better correlation coefficient than without QDs. EvaGreen-based system gave sharper peaks for melting curves than SYBR Green I. The experiments indicated that the polymerase activity could be partially blocked by QDs at the pre-PCR temperatures, resulting in the improvement of PCR specificity. These results indicated that CdTe QDs could be used as a descent qPCR enhancer. Good amplification fidelity in QDs-facilitated qPCR was also a plus that has not been reported elsewhere.     

Mutants of Taq DNA polymerase resistant to PCR inhibitors allow DNA amplification from whole blood and crude soil samples

Potent PCR inhibitors in blood and soil samples can cause false negative results from PCR-based clinical and forensic tests. We show that the effect of these inhibitors is primarily upon Taq DNA polymerase, since mutational alteration of the polymerase can overcome the inhibition to the extent that no DNA purification is now required. An N-terminal deletion (Klentaq1) is some 10–100-fold inhibition resistant to whole blood compared to full-length, wild-type (w.t.) Taq, which is strongly inhibited by 0.1–1% blood. Further mutations at codon 708, both in Klentaq 1 and Taq, confer enhanced resistance to various inhibitors of PCR reactions, including whole blood, plasma, hemoglobin, lactoferrin, serum IgG, soil extracts and humic acid, as well as high concentrations of intercalating dyes. Blood PCR inhibitors can predominantly reduce the DNA extension speed of the w.t. Taq polymerase as compared to the mutant enzymes. Single-copy human genomic targets are readily amplified from whole blood or crude soil extract, without pretreatment to purify the template DNA, and the allowed increase in dye concentration overcomes fluorescence background and quenching in real-time PCR of blood.     

Improving qPCR efficiency in environmental samples by selective removal of humic acids with DAX-8

Quantitative PCR is becoming the method of choice for the detection of pathogenic microorganisms and other targets in the environment. A major obstacle when amplifying DNA is the presence of inhibiting substances like humic acids that decrease the efficiency of PCR. We combined the polymeric adsorbent Supelite™ DAX-8 with a large-volume (10 mL) nucleic acid extraction method to decrease the humic acid content prior to qPCR quantification in water samples. The method was tested by spiking with humic acid standards and the bacterial surrogate Acinetobacter baylyi ADP1. Improvements in qPCR detection of ADP1 after application of DAX-8 resin (5 and 10 w/v%) were compared with the effects of added bovine serum albumin (BSA) (50, 100 and 200 ng/μL). Both additions improved detection of ADP1 by counteracting inhibitory effects. There were no changes in mean cycle threshold difference (ΔC_T) after application of DAX-8 compared to the control despite some loss of DNA, whereas significant increases occurred for BSA, irrespective of BSA concentration applied. The use of DAX-8 leads to an increase in qPCR amplification efficiency in contrast to BSA. The commonly used method to calculate genomic sample concentrations by comparing measured CT values relative to standard curves is only valid if amplification efficiencies of both are sufficiently similar. DAX-8 can provide this efficiency by removing humic acids permanently from nucleic acid extracts and has the potential to significantly increase the reliability of reported non-detects and measured results obtained by qPCR in environmental monitoring.     

A cost-effective high-resolution melting approach using the EvaGreen dye for DNA polymorphism detection and genotyping in plants

High-resolution melting (HRM) analysis relies on the use of fluorescent dyes, such as LCGreen,ResoLight, and SYTO9, which bind in a saturated manner to the double-stranded DNAs. These dyes are expensive in use and may not be affordable when dealing with a large quantity of samples. EvaGreen is a much cheaper DNA helix intercalating dye and has been used in quantitative real-time polymerase chain reaction (PCR) and post-PCR DNA melt curve analysis. Here we report on the development of an EvaGreen-based HRM analysis and its performance, in comparison with the popular LCGreen-based HRM analysis, in detection of DNA polymorphism in plants. We found that various polymorphisms ranged from single nucleotide polymorphisms (SNPs) to Indels were equally detected by using EvaGreen- or LCGreen-based HRM. EvaGreen dye was sensitive enough in discovery of SNPs in fivefold pooled samples.Using this economical dye we successfully identified multiple novel mutant alleles of Gln1-3 gene,which produces a cytosolic glutamine synthetase isoenzyme (GS1), in a maize ethyl methanesulfonate (EMS)-mutagenized library, and genotyped rice mapping populations with SNP markers. The current results suggest that EvaGreen is a promising dye for HRM analysis for its ease to use and cost effectiveness.     

A novel kinase-based ATP assay using molecular beacon

Quantitation of E6 oncogene sequences of the human papillomavirus type 16 by real-time or quantitative PCR (qPCR) is used to determine the viral load, which correlates with the degree of the cervical neoplastic lesions. In the presence of EvaGreen, a new DNA intercalating fluorochrome, we obtained consistent and reproducible qPCR amplification curves and thermal denaturation profiles identical to those of the authentic E6–HPV16 (human papillomavirus 16) genome from the amplification products derived from a construct carrying the E6–HPV16 oncogene. E6–HPV16 quantitation in the presence of EvaGreen, therefore, is reproducible and specific and may be used to determine HPV16 viral load.     

1,2-propanediol-trehalose mixture as a potent quantitative real-time PCR enhancer

Background  

Quantitative real-time PCR (qPCR) is becoming increasingly important for DNA genotyping and gene expression analysis. For continuous monitoring of the production of PCR amplicons DNA-intercalating dyes are widely used. Recently, we have introduced a new qPCR mix which showed improved amplification of medium-size genomic DNA fragments in the presence of DNA dye SYBR green I (SGI). In this study we tested whether the new PCR mix is also suitable for other DNA dyes used for qPCR and whether it can be applied for amplification of DNA fragments which are difficult to amplify.     

Fluorescent cyanine dyes for the quantification of low amounts of dsDNA

In this research six cyanine fluorophores for the quantification of dsDNA in the pg-ng range, without amplification, are compared under exactly identical conditions: EvaGreen, SYBR Green, PicoGreen, AccuClear, AccuBlue NextGen and YOYO-1. The fluorescence intensity as a function of the amount of dsDNA is measured at the optimal wavelengths for excitation and emission and for each dye the limit of detection and the response linearity at low levels of dsDNA are determined. No linear range was found for SYBR Green and YOYO-1 for pg-ng quantities of dsDNA. EvaGreen, PicoGreen, AccuClear and AccuBlue NextGen show good linearity in the pg-ng range. AccuClear exhibits the widest linear range of 3 pg–200 ng, whereas AccuBlue NextGen turned out to have the highest sensitivity of the tested dyes with a limit of detection of 50 pg.     

Use of a fluorogenic probe in a PCR-based assay for the detection of Listeria monocytogenes.

A PCR-based assay for Listeria monocytogenes that uses the hydrolysis of an internal fluorogenic probe to monitor the amplification of the target has been formatted. The fluorogenic 5' nuclease PCR assay takes advantage of the endogenous 5' --> 3' nuclease activity of Taq DNA polymerase to digest a probe which is labelled with two fluorescent dyes and hybridizes to the amplicon during PCR. When the probe is intact, the two fluorophores interact such that the emission of the reporter dye is quenched. During amplification, the probe is hydrolyzed, relieving the quenching of the reporter and resulting in an increase in its fluorescence intensity. This change in reporter dye fluorescence is quantitative for the amount of PCR product and, under appropriate conditions, for the amount of template. We have applied the fluorogenic 5' nuclease PCR assay to detect L. monocytogenes, using an 858-bp amplicon of hemolysin (hlyA) as the target. Maximum sensitivity was achieved by evaluating various fluorogenic probes and then optimizing the assay components and cycling parameters. With crude cell lysates, the total assay could be completed in 3 h with a detection limit of approximately 50 CFU. Quantification was linear over a range of 5 x 10(1) to 5 x 10(5) CFU.     

High-sensitivity stable-isotope probing by a quantitative terminal restriction fragment length polymorphism protocol

Stable-isotope probing (SIP) has proved a valuable cultivation-independent tool for linking specific microbial populations to selected functions in various natural and engineered systems. However, application of SIP to microbial populations with relatively minor buoyant density increases, such as populations that utilize compounds as a nitrogen source, results in reduced resolution of labeled populations. We therefore developed a tandem quantitative PCR (qPCR)-TRFLP (terminal restriction fragment length polymorphism) protocol that improves resolution of detection by quantifying specific taxonomic groups in gradient fractions. This method combines well-controlled amplification with TRFLP analysis to quantify relative taxon abundance in amplicon pools of FAM-labeled PCR products, using the intercalating dye EvaGreen to monitor amplification. Method accuracy was evaluated using mixtures of cloned 16S rRNA genes, DNA extracted from low- and high-G+C bacterial isolates (Escherichia coli, Rhodococcus, Variovorax, and Microbacterium), and DNA from soil microcosms amended with known amounts of genomic DNA from bacterial isolates. Improved resolution of minor shifts in buoyant density relative to TRFLP analysis alone was confirmed using well-controlled SIP analyses.     

Fluorescence-based temperature control for polymerase chain reaction

The ability to accurately monitor solution temperature is important for the polymerase chain reaction (PCR). Robust amplification during PCR is contingent on the solution reaching denaturation and annealing temperatures. By correlating temperature to the fluorescence of a passive dye, noninvasive monitoring of solution temperatures is possible. The temperature sensitivity of 22 fluorescent dyes was assessed. Emission spectra were monitored and the change in fluorescence between 45 and 95 °C was quantified. Seven dyes decreased in intensity as the temperature increased, and 15 were variable depending on the excitation wavelength. Sulforhodamine B (monosodium salt) exhibited a fold change in fluorescence of 2.85. Faster PCR minimizes cycling times and improves turnaround time, throughput, and specificity. If temperature measurements are accurate, no holding period is required even at rapid speeds. A custom instrument using fluorescence-based temperature monitoring with dynamic feedback control for temperature cycling amplified a fragment surrounding rs917118 from genomic DNA in 3 min and 45 s using 35 cycles, allowing subsequent genotyping by high-resolution melting analysis. Gold-standard thermocouple readings and fluorescence-based temperature differences were 0.29 ± 0.17 and 0.96 ± 0.26 °C at annealing and denaturation, respectively. This new method for temperature cycling may allow faster speeds for PCR than currently considered possible.     

Development of A Super-Sensitive Diagnostic Method for African Swine Fever Using CRISPR Techniques

African swine fever(ASF) is an infectious disease caused by African swine fever virus(ASFV) with clinical symptoms of high fever, hemorrhages and high mortality rate, posing a threat to the global swine industry and food security. Quarantine and control of ASFV is crucial for preventing swine industry from ASFV infection. In this study, a recombinase polymerase amplification(RPA)-CRISPR-based nucleic acid detection method was developed for diagnosing ASF. As a highly sensitive method, RPA-CRISPR can detect even a single copy of ASFV plasmid and genomic DNA by determining fluorescence signal induced by collateral cleavage of CRISPR-lwCas13 a(previously known as C2 c2) through quantitative real-time PCR(qPCR) and has the same or even higher sensitivity than the traditional qPCR method. A lateral flow strip was developed and used in combination with RPA-CRISPR for ASFV detection with the same level of sensitivity of TaqMan qPCR. Likewise, RPA-CRISPR is capable of distinguishing ASFV genomic DNA from viral DNA/RNA of other porcine viruses without any cross-reactivity. This diagnostic method is also available for diagnosing ASFV clinical DNA samples with coincidence rate of 100% for both ASFV positive and negative samples. RPA-CRISPR has great potential for clinical quarantine of ASFV in swine industry and food security.     

Capacity of Nine Thermostable DNA Polymerases To Mediate DNA Amplification in the Presence of PCR-Inhibiting Samples

The PCR is an extremely powerful method for detecting microorganisms. However, its full potential as a rapid detection method is limited by the inhibition of the thermostable DNA polymerase from Thermus aquaticus by many components found in complex biological samples. In this study, we have compared the effects of known PCR-inhibiting samples on nine thermostable DNA polymerases. Samples of blood, cheese, feces, and meat, as well as various ions, were added to PCR mixtures containing various thermostable DNA polymerases. The nucleic acid amplification capacity of the nine polymerases, under buffer conditions recommended by the manufacturers, was evaluated by using a PCR-based detection method for Listeria monocytogenes in the presence of purified template DNA and different concentrations of PCR inhibitors. The AmpliTaq Gold and the Taq DNA polymerases from Thermus aquaticus were totally inhibited in the presence of 0.004% (vol/vol) blood in the PCR mixture, while the HotTub, Pwo, rTth, and Tfl DNA polymerases were able to amplify DNA in the presence of 20% (vol/vol) blood without reduced amplification sensitivity. The DNA polymerase from Thermotoga maritima (Ultma) was found to be the most susceptible to PCR inhibitors present in cheese, feces, and meat samples. When the inhibitory effect of K and Na ions was tested on the nine polymerases, HotTub from Thermus flavus and rTth from Thermus thermophilus were the most resistant. Thus, the PCR-inhibiting effect of various components in biological samples can, to some extent, be eliminated by the use of the appropriate thermostable DNA polymerase.     

Improved PCR Performance Using Template DNA from Formalin-Fixed and Paraffin-Embedded Tissues by Overcoming PCR Inhibition

Formalin-fixed and paraffin-embedded (FFPE) tissues represent a valuable source for biomarker studies and clinical routine diagnostics. However, they suffer from degradation of nucleic acids due to the fixation process. Since genetic and epigenetic studies usually require PCR amplification, this degradation hampers its use significantly, impairing PCR robustness or necessitating short amplicons. In routine laboratory medicine a highly robust PCR performance is mandatory for the clinical utility of genetic and epigenetic biomarkers. Therefore, methods to improve PCR performance using DNA from FFPE tissue are highly desired and of wider interest. The effect of template DNA derived from FFPE tissues on PCR performance was investigated by means of qPCR and conventional PCR using PCR fragments of different sizes. DNA fragmentation was analyzed via agarose gel electrophoresis. This study showed that poor PCR amplification was partly caused by inhibition of the DNA polymerase by fragmented DNA from FFPE tissue and not only due to the absence of intact template molecules of sufficient integrity. This PCR inhibition was successfully minimized by increasing the polymerase concentration, dNTP concentration and PCR elongation time thereby allowing for the robust amplification of larger amplicons. This was shown for genomic template DNA as well as for bisulfite-converted template DNA required for DNA methylation analyses. In conclusion, PCR using DNA from FFPE tissue suffers from inhibition which can be alleviated by adaptation of the PCR conditions, therefore allowing for a significant improvement of PCR performance with regard to variability and the generation of larger amplicons. The presented solutions to overcome this PCR inhibition are of tremendous value for clinical chemistry and laboratory medicine.     

Characterization of EvaGreen and the implication of its physicochemical properties for qPCR applications

Background  

EvaGreen (EG) is a newly developed DNA-binding dye that has recently been used in quantitative real-time PCR (qPCR), post-PCR DNA melt curve analysis and several other applications. However, very little is known about the physicochemical properties of the dye and their relevance to the applications, particularly to qPCR and post PCR DNA melt curve analysis. In this paper, we characterized EG along with a widely used qPCR dye, SYBR Green I (SG), for their DNA-binding properties and stability, and compared their performance in qPCR under a variety of conditions.     

Highly specific fluorescence detection of T4 polynucleotide kinase activity via photo-induced electron transfer

Sensitive and reliable study of the activity of polynucleotide kinase (PNK) and its potential inhibitors is of great importance for biochemical interaction related to DNA phosphorylation as well as development of kinase-targeted drug discovery. To achieve facile and reliable detection of PNK activity, we report here a novel fluorescence method for PNK assay based on a combination of exonuclease cleavage reaction and photo-induced electron transfer (PIET) by using T4 PNK as a model target. The fluorescence of 3′-carboxyfluorescein-labeled DNA probe (FDNA) is effectively quenched by deoxyguanosines at the 5′ end of its complementary DNA (cDNA) due to an effective PIET between deoxyguanosines and fluorophore. Whereas FDNA/cDNA hybrid is phosphorylated by PNK and then immediately cleaved by lambda exonuclease (λ exo), fluorescence is greatly restored due to the break of PIET. This homogeneous PNK activity assay does not require a complex design by taking advantage of the quenching ability of deoxyguanosines, making the proposed strategy facile and cost-effective. The activity of PNK can be sensitively detected in the range of 0.005 to 10 U mL⁻¹ with a detection limit of 2.1 × 10⁻³ U mL⁻¹. Research on inhibition efficiency of different inhibitors demonstrated that it can be explored to evaluate inhibition capacity of inhibitors. The application for detection of PNK activity in complex matrix achieved satisfactory results. Therefore, this PIET strategy opens a promising avenue for studying T4 PNK activity as well as evaluating PNK inhibitors, which is of great importance for discovering kinase-targeted drugs.     

Purification of polymerase chain reaction (PCR)-amplifiable DNA from compost piles containing bovine mortalities

Livestock production systems utilize composting as a method of disposal of livestock mortalities, but there is limited information on the rate and extent of carcass decomposition. Detection of specific DNA fragments by PCR offers a method for investigating the degradation of carcasses and other biological materials during composting. However, the purity of extracted DNA is critical for successful PCR analysis. We applied a method to purify DNA from compost samples and have tested the method by analyzing bovine and plant DNA targets after 0, 4, and 12 month of composting. The concentration of organic matter from composted material posed a particular challenge in obtaining pure DNA for molecular analysis. Initially extracted DNA from composted piles at day 147 was discoloured, and PCR inhibitors prevented amplification of target plant or bovine gene fragments. Bovine serum albumin improved detection by PCR (25–50 μl final volume) through the removal of inhibitors, but only when concentrations of humic acids in extracted DNA were 1.0 ng μl⁻¹ or less. Optimal purification of DNA from compost was achieved by chromatography using Sepharose 4B columns. The described DNA purification protocol enabled molecular monitoring of otherwise cryptic bovine and plant target genes throughout the composting process. The assay could likely be used to obtain PCR-amplifiable DNA that could be used for the detection of microbial pathogens in compost.     

Characterization and applications of CataCleave probe in real-time detection assays

Cycling probe technology (CPT), which utilizes a chimeric DNA-RNA-DNA probe and RNase H, is a rapid, isothermal probe amplification system for the detection of target DNA. Upon hybridization of the probe to its target DNA, RNase H cleaves the RNA portion of the DNA/RNA hybrid. Utilizing CPT, we designed a catalytically cleavable fluorescence probe (CataCleave probe) containing two internal fluorophores. Fluorescence intensity of the probe itself was weak due to F?rster resonance energy transfer. Cleavage of the probe by RNase H in the presence of its target DNA caused enhancement of donor fluorescence, but this was not observed with nonspecific target DNA. Further, RNase H reactions with CataCleave probe exhibit a catalytic dose-dependent response to target DNA. This confirms the capability for the direct detection of specific target DNA through a signal amplification process. Moreover, CataCleave probe is also ideal for detecting DNA amplification processes, such as polymerase chain reaction (PCR) and isothermal rolling circle amplification (RCA). In fact, we observed signal enhancement proportional to the amount of RCA product formed. We were also able to monitor real-time PCR by measuring enhancement of donor fluorescence. Hence, CataCleave probe is useful for real-time monitoring of both isothermal and temperature-cycling nucleic acid amplification methods.     

PCR-Free Detection of Genetically Modified Organisms Using Magnetic Capture Technology and Fluorescence Cross-Correlation Spectroscopy

The safety of genetically modified organisms (GMOs) has attracted much attention recently. Polymerase chain reaction (PCR) amplification is a common method used in the identification of GMOs. However, a major disadvantage of PCR is the potential amplification of non-target DNA, causing false-positive identification. Thus, there remains a need for a simple, reliable and ultrasensitive method to identify and quantify GMO in crops. This report is to introduce a magnetic bead-based PCR-free method for rapid detection of GMOs using dual-color fluorescence cross-correlation spectroscopy (FCCS). The cauliflower mosaic virus 35S (CaMV35S) promoter commonly used in transgenic products was targeted. CaMV35S target was captured by a biotin-labeled nucleic acid probe and then purified using streptavidin-coated magnetic beads through biotin-streptavidin linkage. The purified target DNA fragment was hybridized with two nucleic acid probes labeled respectively by Rhodamine Green and Cy5 dyes. Finally, FCCS was used to detect and quantify the target DNA fragment through simultaneously detecting the fluorescence emissions from the two dyes. In our study, GMOs in genetically engineered soybeans and tomatoes were detected, using the magnetic bead-based PCR-free FCCS method. A detection limit of 50 pM GMOs target was achieved and PCR-free detection of GMOs from 5 µg genomic DNA with magnetic capture technology was accomplished. Also, the accuracy of GMO determination by the FCCS method is verified by spectrophotometry at 260 nm using PCR amplified target DNA fragment from GM tomato. The new method is rapid and effective as demonstrated in our experiments and can be easily extended to high-throughput and automatic screening format. We believe that the new magnetic bead-assisted FCCS detection technique will be a useful tool for PCR-free GMOs identification and other specific nucleic acids.