Magnetic nanoparticle-based immunosensor for electrochemical detection of hepatitis B surface antigen

An electrochemical immunosensor was developed for the detection of hepatitis B surface antigen (HBsAg). The biotinylated hepatitis B surface antibody was immobilized on streptavidin magnetic nanoparticles and used for targeting the HBsAg. By the addition of horseradish peroxidase conjugated with secondary antibody (HRP–HBsAb), a sandwich-type immunoassay format was formed. Aminophenol as substrate for conjugated HRP was enzymatically changed into 3-aminophenoxazone (3-APZ). This electroactive enzymatic production (3-APZ) was transferred into an electrochemical cell and monitored by cyclic voltammetry. Under optimal conditions, the cathodic current response of 3-APZ, which was proportional to the HBsAg concentration, was measured by a glassy carbon electrode. The immunosensor response was linear toward HBsAg in the concentration range from 0.001 to 0.015 ng/ml with a detection limit of 0.9 pg/ml at a signal/noise ratio of 3.     

Chemiluminescent immunoassay of thyroxine enhanced by microchip electrophoresis

A homogeneous chemiluminescent immunoassay of thyroxine (T4) enhanced by microchip electrophoresis separation has been developed. The method deployed the competitive immunoreaction of T4 and horseradish peroxidase (HRP)-labeled T4 (HRP-T4) with anti-T4 mouse monoclonal antibody (Ab). HRP-T4 and the HRP-T4-Ab complex were separated and quantified by using microchip electrophoresis (MCE) with chemiluminescence (CL) detection. Highly sensitive CL detection was achieved by means of HPR-catalyzed luminol-H₂O₂ reaction. Due to the effective MCE separation, the CL analytical signal was less prone to sample matrix interference. Under the selected assay conditions, the MCE separation was accomplished within 60 s. The linear range for T4 was 5-250 nM with a detection limit of 2.2 nM (signal/noise ratio = 3). The current method was successfully applied for the quantification of T4 in human serum samples. It was demonstrated that the current MCE-CL-enhanced competitive immunoassay was quick, sensitive, and highly selective. It may serve as a tool for clinical analysis of T4 to assist in the diagnosis of thyroid gland functions.     

Electrochemical immunosensor for α-fetoprotein detection using ferroferric oxide and horseradish peroxidase as signal amplification labels

An electrochemical immunosensor for quantitative detection of α-fetoprotein (AFP) in human serum was developed using graphene sheets (GS) and thionine (TH) as electrode materials and mesoporous silica nanoparticles (MSNs) loaded with ferroferric oxide (Fe₃O₄) nanoparticles and horseradish peroxidase (HRP) as labels for signal amplification. In this study, the compound of GS and TH (GS–TH) was used as a substrate for promoting electron transfer and immobilization of primary antibody of AFP (Ab₁). MSNs were used as a carrier for immobilization of secondary antibody of AFP (Ab₂), Fe₃O₄, and HRP. The synergistic effect occurred between Fe₃O₄ and HRP and greatly improved the sensitivity of the immunosensor. This method could detect AFP over a wide concentration range from 0.01 to 25 ng ml⁻¹ with a detection limit of 4 pg ml⁻¹. This strategy may find wide potential application in clinical analysis or detection of other tumor markers.     

A magnetic particles-based chemiluminescence enzyme immunoassay for rapid detection of ovalbumin

Egg allergy is an important public health and safety concern, so quantification and administration of food or vaccines containing ovalbumin (OVA) are urgently needed. This study aimed to establish a rapid and sensitive magnetic particles–chemiluminescence enzyme immunoassay (MPs–CLEIA) for the determination of OVA. The proposed method was developed on the basis of a double antibodies sandwich immunoreaction and luminol–H₂O₂ chemiluminescence system. The MPs served as both the solid phase and separator, the anti-OVA MPs-coated polyclonal antibodies (pAbs) were used as capturing antibody, and the horseradish peroxidase (HRP)-labeled monoclonal antibody (mAb) was taken as detecting antibody. The parameters of the method were evaluated and optimized. The established MPs–CLEIA method had a linear range from 0.31 to 100 ng/ml with a detection limit of 0.24 ng/ml. The assays showed low reactivities and less than 5% of intraassay and interassay coefficients of variation (CVs), and the average recoveries were between 92 and 97%. Furthermore, the developed method was applied in real samples analysis successfully, and the correlation coefficient with the commercially available OVA kit was 0.9976. Moreover, it was more rapid and sensitive compared with the other methods for testing OVA.     

The development of an electrochemical immunosensor using a thiol aromatic aldehyde and PAMAM-functionalized Fe3O4@Au nanoparticles

In this work, a novel thiol aromatic aldehyde was synthesized. It can be used as a substrate to directly immobilize antibodies on a gold electrode, for which no additional chemical cross-linker is required. It was also applied as a linker to prepare Fe₃O₄@Au/PAMAM/Ab₂–horseradish peroxidase bioconjugates, which introduced multiple enzymes onto a sensing interface owing to the high surface-to-volume ratio of Fe₃O₄@Au nanoparticles and many functional groups of the poly(amidoamine) dendrimer (PAMAM). The introduced multiple enzymes greatly improved the detection signal. Under optimal conditions, the proposed electrochemical immunosensor exhibited desirable performance for detection of IgG in the range 0.005–50 ng ml⁻¹ with a detection limit of 3 pg ml⁻¹ based on a signal-to-noise ratio of 3. It has great potential application in the area of clinical analysis.     

Integrated microfluidic systems with an immunosensor modified with carbon nanotubes for detection of prostate specific antigen (PSA) in human serum samples

This paper describes the development of an immunosensor coupled to glassy carbon electrode (GCE) modified with multiwall carbon nanotubes (MWCNT) (CNT-GCE) integrated with microfluidic systems for rapid and sensitive quantification of prostate specific antigen (PSA) in human serum samples. Mouse monoclonal (5G6) to PSA antibodies were immobilized on a rotating disk. PSA in the serum sample are allowed to react immunologically with the immobilized anti-tPSA and horseradish peroxidase (HRP) enzyme-labeled second antibodies specific to PSA. HRP, in the presence of hydrogen peroxide (H(2)O(2)) catalyzes the oxidation of 4-tert-butylcatechol (4-TBC), whose back electrochemical reduction was detected on CNT-GCE at -0.15 V. The electrochemical detection can be done within 1 min and total assay time was 30 min. The calculated detection limits for electrochemical detection and the ELISA procedure are 0.08 and 0.5 microg L(-1), respectively and the intra- and inter-assay coefficients of variation were below 4.5%. The electrochemical immunosensor showed higher sensitivity and lower time consumed than the standard spectrophotometric detection ELISA method, which shows potential for detecting PSA in clinical diagnosis.     

Detection of glucose using immobilized bienzyme on cyclic bisureas–gold nanoparticle conjugate

A highly sensitive electrochemical glucose sensor has been developed by the co-immobilization of glucose oxidase (GOx) and horseradish peroxidase (HRP) onto a gold electrode modified with biocompatible cyclic bisureas–gold nanoparticle conjugate (CBU–AuNP). A self-assembled monolayer of mercaptopropionic acid (MPA) and CBU–AuNP was formed on the gold electrode through a layer-by-layer assembly. This modified electrode was used for immobilization of the enzymes GOx and HRP. Both the HRP and GOx retained their catalytic activity for an extended time, as indicated by the low value of Michaelis–Menten constant. Analytical performance of the sensor was examined in terms of sensitivity, selectivity, reproducibility, lower detection limit, and stability. The developed sensor surface exhibited a limit of detection of 100 nM with a linear range of 100 nM to 1 mM. A high sensitivity of 217.5 μA mM⁻¹ cm⁻² at a low potential of −0.3 V was obtained in this sensor design. Various kinetic parameters were calculated. The sensor was examined for its practical clinical application by estimating glucose in human blood sample.     

Trace detection of picloram using an electrochemical immunosensor based on three-dimensional gold nanoclusters

Picloram, a herbicide widely used for broadleaf weed control, is persistent and mobile in soil and water with adverse health and environmental effects. It is important to develop a sensitive method for accurate detection of trace picloram in the environment. In this article, a type of ordered three-dimensional (3D) gold (Au) nanoclusters obtained by two-step electrodeposition using the spatial obstruction/direction of the polycarbonate membrane is reported. Bovine serum albumin (BSA)-picloram was immobilized on the 3D Au nanoclusters by self-assembly, and then competitive immunoreaction with picloram antibody and target picloram was executed. The horseradish peroxidase (HRP)-labeled secondary antibody was applied for enzyme-amplified amperometric measurement. The electrodeposited Au nanoclusters built direct electrical contact and immobilization interface with protein molecules without postmodification and positioning. Under the optimal conditions, the linear range for picloram determination was 0.001-10 μg/ml with a correlation coefficient of 0.996. The detection and quantification limits were 5.0 × 10⁻⁴ and 0.0021 μg/ml, respectively. Picloram concentrations in peach and excess sludge supernatant extracts were tested by the proposed immunosensor, which exhibited good precision, sensitivity, selectivity, and storage stability.     

Voltage-induced inhibition of antigen-antibody binding at conducting optical waveguides

Optical waveguides coated with electrically conducting indium-tin oxide (ITO) are demonstrated here as a new class of substrate for fluorescent immunosensors. These waveguides combine electrochemical control with evanescent excitation and image-based detection. Presented here are preliminary results utilizing these waveguides that demonstrate influence of waveguide voltage on antigen binding. Specifically, waveguide surfaces were bisected into electrically addressable halves, anti-ovalbumin immobilized in patterns on their surfaces, and a 1.3 V bias applied between waveguide halves in the presence of Cy5-labeled ovalbumin in 10 mM phosphate buffer (pH 7.4) containing 150 mM NaCl and 0.05% Tween-20. Fluorescence imaging indicated that binding of the antigen to positively biased waveguide halves was inhibited nearly 10-fold compared with negatively biased waveguide halves and unbiased controls. Furthermore, it is shown that ovalbumin binding to positively biased waveguide regions is regenerated after removal of applied voltage. These results suggest that electrochemical control of immunosensor substrates can be used as a possible strategy toward minimizing cross-reactive binding and/or nonspecific adsorption, immunosensor regeneration, and controlled binding.     

Direct immobilization of antibodies on a new polymer film for fabricating an electrochemical impedance immunosensor

A new polymer bearing aldehyde groups was designed and synthesized by grafting 4-pyridinecarboxaldehyde onto poly(epichlorohydrin). Antibodies can be directly immobilized on the surface of the polymer film through the covalent bonding of aldehyde groups of the film with amino groups of antibodies. In this study, human immunoglobulin G (IgG) was used as a model analyte for the fabrication of an electrochemical impedance immunosensor. Using the proposed immunosensor, IgG in the range from 0.1 to 80 ng ml⁻¹ was detected with a detection limit of 0.07 ng ml⁻¹ (signal/noise [S/N] = 3). In addition, the electrochemical impedance immunosensor displays good stability and reproducibility.     

Integrated microfluidic magnetic immunosensor for quantification of human serum IgG antibodies to Helicobacter pylori

In this paper, we have developed and characterized a microfluidic magnetic immunosensor coupled to a gold electrode for the rapid and sensitive quantification of human serum IgG antibodies to Helicobacter pylori. This microorganism cause peptic ulcers and chronic gastritis, affecting around the 10% of the world population. The sensor was completely automated and the antibodies detection in serum samples was carried out using a non-competitive immunoassay based on the use of purified H. pylori antigens that are immobilized on magnetic microspheres 3-aminopropyl-modified. The magnetic microbeads were injected into microchannel devices and manipulated for an external removable magnet. The IgG antibodies in human serum sample are allowed to react immunologically with the immobilized antigens, and the bounded antibodies are quantified by alkaline phosphatase (AP) enzyme-labeled second antibodies specific to human IgG. The p-aminophenyl phosphate (p-APP) was converted to p-aminophenol (p-AP) by AP and an electroactive product was detected on gold layer electrode at 0.250 V. The response current obtained from the product of enzymatic reaction is directly proportional to the activity of the enzyme and, consequently, to the amount of IgG antibodies to H. pylori in serum samples. The electrochemical detection can be done within 1 min and total assay time was 25 min. The calculated detection limits for electrochemical detection and the ELISA procedure were 0.37 and 2.1 U mL⁻¹, respectively, and the within- and between-assay coefficients of variation were below 5%. Our results indicate the potential usefulness of our fabricated microbiochip for the early assessment of human serum immunoglobulin G (IgG) antibodies to H. pylori.     

In situ DNA amplification with magnetic primers for the electrochemical detection of food pathogens

A sensitive and selective genomagnetic assay for the electrochemical detection of food pathogens based on in situ DNA amplification with magnetic primers has been designed. The performance of the genomagnetic assay was firstly demonstrated for a DNA synthetic target by its double-hybridization with both a digoxigenin probe and a biotinylated capture probe, and further binding to streptavidin-modified magnetic beads. The DNA sandwiched target bound on the magnetic beads is then separated by using a magneto electrode based on graphite-epoxy composite. The electrochemical detection is finally achieved by an enzyme marker, anti-digoxigenin horseradish peroxidase (HRP). The novel strategy was used for the rapid and sensitive detection of polymerase chain reaction (PCR) amplified samples. Promising resultants were also achieved for the DNA amplification directly performed on magnetic beads by using a novel magnetic primer, i.e., the up PCR primer bound to magnetic beads. Moreover, the magneto DNA biosensing assay was able to detect changes at single nucleotide polymorphism (SNP) level, when stringent hybridization conditions were used. The reliability of the assay was tested for Salmonella spp., the most important pathogen affecting food safety.     

A colorimetric sandwich-type assay for sensitive thrombin detection based on enzyme-linked aptamer assay

A colorimetric sandwich-type assay based on enzyme-linked aptamer assay has been developed for the fast and sensitive detection of as low as 25 fM of thrombin with high linearity. Aptamer-immobilized glass was used to capture the target analyte, whereas a second aptamer, functionalized with horseradish peroxidase (HRP), was employed for the conventional 3,5,3′,5′-tetramethylbenzidine (TMB)-based colorimetric detection. Without the troublesome antibody requirement of the conventional enzyme-linked immunosorbent assay (ELISA), as low as 25 fM of thrombin could be rapidly and reproducibly detected. This assay has superior, or at least equal, recovery and accuracy to that of conventional antibody-based ELISA.     

Silica nanoparticle-based microfluidic immunosensor with laser-induced fluorescence detection for the quantification of immunoreactive trypsin

The purpose of this study was to develop a silica nanoparticle-based immunosensor with laser-induced fluorescence (LIF) as a detection system. The proposed device was applied to quantify the immunoreactive trypsin (IRT) in cystic fibrosis (CF) newborn screening. A new ultrasonic procedure was used to extract the IRT from blood spot samples collected on filter papers. After extraction, the IRT reacted immunologically with anti-IRT monoclonal antibodies immobilized on a microfluidic glass chip modified with 3-aminopropyl functionalized silica nanoparticles (APSN–APTES-modified glass chips). The bounded IRT was quantified by horseradish peroxidase (HRP)-conjugated anti-IRT antibody (anti-IRT–Ab) using 10-acetyl-3,7-dihydroxyphenoxazine (ADHP) as enzymatic mediator. The HRP catalyzed the oxidation of nonfluorescent ADHP to highly fluorescent resorufin, which was measured by LIF detector, using excitation lambda at 561 nm and emission at 585 nm. The detection limits (LODs) calculated for LIF detection and for a commercial enzyme-linked immunosorbent assay (ELISA) test kit were 0.87 and 4.2 ng ml⁻¹, respectively. The within- and between-assay variation coefficients for the LIF detection procedure were below 6.5%. The blood spot samples collected on filter papers were analyzed with the proposed method, and the results were compared with those of the reference ELISA method, demonstrating a potential usefulness for the clinical assessment of IRT during the early neonatal period.     

Immunomagnetic bead-based recovery and real time quantitative PCR (RT iq-PCR) for sensitive quantification of aflatoxin B(1)

Aflatoxin B₁ is an unavoidable natural mycotoxin that enters the food chain by contamination of food grains and feedstuffs, potentially posing carcinogenic risks to animal and human health. Immuno-PCR methods have the potential to address the need of meeting the regulatory limits by detecting trace levels of toxins present in food and animal feeds. This paper describes a real-time immuno-quantitative PCR (RT-iqPCR) assay for quantification of aflatoxin B₁ suspended in methanol:water solution that can also serve as an extraction solvent. Immuno-PCR approaches were examined including direct vs. indirect sandwich assays using monoclonal vs. polyclonal antibodies. Our best approach was obtained using monoclonal antibodies to capture aflatoxin in solution prior to immobilizing the F_c portion of the capture antibodies onto to protein G magnetic beads. This was followed by the addition of a polyclonal ‘signal antibody’ tethered with an oligonucleotide template for a subsequent PCR assay. The RT-iqPCR assay described herein leads to the sensitive detection and quantification of aflatoxin B₁ from 10 ppb down to 0.1 ppb with high correlation (r² = 0.97) and efficiency (99.5%). The approach also detected the high-dose ‘hook effect’ phenomenon (excess antigen) which was overcome by the use of dilution protocols to eliminate false negatives that may occur at levels above quantification limits of the assay. The RT-iqPCR approach discussed here is presented as a model system that could easily be adapted for aflatoxin detection in a variety of food or animal feed samples using a simple methanol:water solution as an extraction solvent.     

Wafer-scale nanowell array patterning based electrochemical impedimetric immunosensor

We have reported that nanowell array (NWA) can enhance electrochemical detection of molecular binding events by controlling the binding sites of the captured molecules. Using NWA biosensor based amperometric analysis, we have detected biological macromolecules such as DNA, protein or aptamers at low concentrations. In this research, we developed an impedimetric immunosensor based on wafer-scale NWA for electrochemical detection of stress-induced-phosphoprotein-1 (STIP-1). In order to develop NWA sensor through the cost-effective combination of high-throughput nanopattern, the NWA electrode was fabricated on Si wafer by krypton-fluoride (KrF) stepper semiconductor process. Finally, 12,500,000 ea nanowell with a 500 nm diameter was fabricated on 4 mm × 2 mm substrate. Next, by using these electrodes, we measured impedance to quantify antigen binding to the immunoaffinity layer. The limit of detection (LOD) of the NWA was improved about 100-fold compared to milli-sized electrodes (4 mm × 2 mm) without an NWA. These results suggest that wafer-scale NWA immunosensor will be useful for biosensing applications because their interface response is appropriate for detecting molecular binding events.     

Spectroelectrochemical characterization of pain biomarkers

This article reports the first electrochemical characterization of pain biomarkers that include arachidonic acid (AA), prostaglandin G₂ (PGG₂), and cyclooxygenase 2 (COX-2). These biomarkers are mediators of pathophysiology of pain, inflammation, and cell proliferation in cancer. The article also reports the development of an electrochemical immunosensor for monitoring these pain biomarkers. The results revealed that direct electron transfer between AA metabolites and the electrode could be easily monitored and that an enzyme-modified electrode dramatically enhanced bioelectrocatalytic activity toward AA. Cyclic voltammetric analysis of AA revealed a concentration-dependent anodic current with a slope of 2.37 and a limit of detection (LOD) of 0.25 nM. This unique AA/gold electrode electron transfer provides a good electrochemical sensing platform for prostaglandin H₂ (PGH₂) as the basis for quantitation of pain. An amperometric signal intensity of a COX-2 antibody-modified gold electrode was linear with COX-2 concentration in the range of 0.1-0.5 μg/ml and an LOD of 0.095 μg/ml. The results also revealed a linear correlation of the concentration of PGG₂ with an LOD of 0.227 μM.     

Hydroxyapatite nanoarray-based cyanide biosensor

Here we report a simple, biomolecular-friendly protocol for the fabrication of a hydroxyapatite nanowires array (HANWA) biosensor of spatial positioning, large surface area, and abundant adsorbing sites and its application to cyanide sensing. The fabrication of HANWA is performed by template-assisted electrodeposition. The well-aligned hydroxyapatite nanoarray is composed of vertical nanowires with a diameter of approximately 200 nm and an average length of 1 μm. The electrochemical biosensor for the determination of cyanide through its inhibitory effect on horseradish peroxidase (HRP) encapsulated by chitosan (CHIT) on the platform of HANWA is demonstrated. The current organic-inorganic hybrid nanostructure provides excellent enzyme-substrate contact with enzyme activity well maintained. The densely distributed HANWA with large surface area and abundant adsorbing sites can provide a favorable electrochemical interface for the construction of electrochemical biosensor. A sensitive detection limit of 0.6 ng ml⁻¹ was obtained for cyanide. The proposed CHIT-HRP/HANWA biosensor has the advantages of spatial resolution, high sensitivity, rapid regeneration, and fast response associated with individual nanowires. It broadens the possible applications of chemosensors and biosensors, and it offers an alternative method for toxic substance determination. The new device holds great promise for environmental and food industrial monitoring of toxins.     

Amperometric immunosensor based on multiwalled carbon nanotubes/Prussian blue/nanogold-modified electrode for determination of α-fetoprotein

In this article, a conspicuously simple and highly sensitive amperometric immunosensor based on the sequential electrodeposition of Prussian blue (PB) and gold nanoparticles (GNPs) on multiwalled carbon nanotube (MWCNT)-modified glassy carbon electrode (GCE) surface is proposed for the detection of α-fetoprotein (AFP). By comparison with PB, the MWCNT/PB composite film had been proven to show much better electrochemical stability and a larger response current. The electrodeposited GNP film can be used not only to immobilize biomolecules but also to avoid the leakage of PB and to prevent shedding of MWCNT/PB composite film from the electrode surface. The performance and factors influencing the performance of the immunosensor were investigated. Under optimal experimental conditions, the proposed immunosensor for AFP was observed with an ultralow limit of detection (LOD) equal to 3 pg/ml (at 3δ), and the linear working range spanned the concentrations of AFP from 0.01 to 300 ng/ml. Moreover, the immunosensor, as well as a commercially available kit, was examined for use in the determination of AFP in real human serum specimens. More significant, the assay mentioned here is simpler than the traditional enzyme-linked immunosorbent assay (ELISA), and an excellent correlation of levels of AFP measured was obtained, indicating that the developed immunoassay could be a promising alternative approach for detection of AFP and other tumor markers in the clinical diagnosis.     

A novel electrochemical immunoassay based on diazotization-coupled functionalized bioconjugates as trace labels for ultrasensitive detection of carcinoembryonic antigen

In this article, a novel sandwich-type electrochemical immunosensor based on the signal amplification strategy of diazotization-coupling concept for ultrasensitive detection of carcinoembryonic antigen (CEA) was reported. It operates through physisorption of monoclonal anti-CEA on 4-aminothiophenol (4Atp) functionalized gold electrode interface as the detection platform. Diazo-4Atp-coupled-thionine (Thi)-conjugated gold nanoparticles (GNPs) were prepared for immobilization of horseradish peroxidase (HRP) and secondary anti-CEA to form core-shell bioconjugates that were used as electrochemical signal amplification reagent. The sensitivity of the immunosensor was greatly amplified by a dual amplification: one is that a large number of thionine and HRP was introduced on the electrode surface through sandwich immunoreaction, the other is that HRP as enhancer could catalyze the oxidation reaction of thionine by H(2)O(2), which results in great enhancement of the reduction peak current. Thus, the bioconjugates-based assay provided an amplification approach for detecting CEA at trace levels and led to a detection limit as low as 0.7 pg/mL (at a three times signal-to-noise ratio) that is well-below the threshold value of 2.5 ng/mL for clinical diagnosis. The assay was evaluated for clinical serum samples with various CEA concentrations and received in excellent accordance with the results obtained from the referenced enzyme-linked immunosorbent assay (ELISA).