Rheological study of genipin cross-linked chitosan hydrogels

This paper reports the rheological behavior of chitosan solutions that have been cross-linked with different amounts of genipin, at body temperature and physiological pH. The effect of the cross-linker loading on the rheological properties of hydrogels has been evaluated. The oscillatory time sweep method was used to monitor the dynamic viscoelastic parameters during in situ (i.e., in the rheometer) gelation experiments, enabling the determination of the gelation time. The stress and frequency sweeps were employed to measure G' of the cured hydrogels. It was found that the solutions of chitosan cross-linked with genipin, under physiological conditions, could form relatively strong elastic gels when compared to those of pure chitosan. Moreover, the gelation time obtained from the crossover of G' and G' was in excellent agreement with the value obtained from the Winter-Chambon criterion. A significant reduction on this parameter was achieved even at low genipin concentrations. This behavior suggests that these formulations are able to be produced in situ and thus constitute promising matrices for cells and bioactive molecule encapsulations.     

Glutaraldehyde cross-linked chitosan microspheres for controlled release of centchroman

Glutaraldehyde cross-linked chitosan microspheres were prepared for controlled release of centchroman, a nonsteroidal contraceptive. The cross-linked microspheres with low-molecular-weight (LMW) chitosan (260 kg mol(-1)) have shown maximum degree of swelling (287 wt%) but were found to be poor in loading and release behavior for centchroman. The microspheres with medium-molecular-weight (MMW) chitosan (1134 kg mol(-1)) have shown 250 wt% degree of swelling and 37.5 wt% loading of centchroman, but microspheres with high-molecular-weight (HMW) chitosan (2224 kg mol(-1)) have shown a low degree of swelling (150 wt%) and centchroman loading (30 wt%). The microspheres with MMW chitosan have released 82 wt% of loaded centchroman in a controlled release manner within a period of 70 h in comparison to low- (260 kg mol(-1)) and high-MW (2224 kg mol(-1)) chitosan microspheres. The chitosan microspheres with 62 wt% degree of deacetylation (DDA) were more efficient in the controlled release of centchroman in comparison to chitosan microspheres with low (48 wt%) and high-DDA (75 wt%). The fractional release of centchroman (M(t)/M(infinity)) from chitosan microspheres was used to predict the mechanism of drug release and to determine the diffusion constant (D) of centchroman.     

Metal complexation of chitosan and its glutaraldehyde cross-linked derivative

The physicochemical characterization of metal complexed with chitosan (CS) and its glutaraldehyde cross-linked derivative (CSGA) was investigated. Seven metal ions from chromium through zinc of the first row of the transition metals were selected for complexation. Structural features pertinent to where and how metals bind into both polymers are our main interest. Studies using solid-state NMR spectroscopy and XRPD (X-ray powder diffraction) supported by ESR spectroscopy, ICP-OES (inductively couple plasma-optical emission spectroscopy) and far-FTIR spectroscopy for metal interaction with nitrogen sites at C-2 of the metal-polymer complexes were performed. Theoretical calculations of the metal-polymer ratio, the approximate charges on nitrogen for both amine and imino-linker, and the proton affinity between an alcohol group from the polymer and an amino/imino group are reported. A helical coiled chitosan model and a 2C1L (two-chitosans with one linker) model are proposed here. The metal uptake mechanism for both polymers is concluded to be absorption within the polymers, rather than adsorption on the polymer surface.     

Chemically cross-linked chitosan hydrogel loaded with gelatin for chondrocyte encapsulation

Composite hydrogels can be used as a scaffolding material for chondrogenesis, which requires a biomimetic environment to maintain chondrocyte morphology and phenotype. In this study, gelatin molecules were loaded into a hydrogel polymerized from a chitosan derivative (CML) to form a semi-interpenetrating polymer network. While the porous structure of the hydrogels in the dry state was not dependent on the gelatin content, the collapse extent and pore size decreased as the gelatin content increased. The gelatin loading also reduced the swelling ratio of the CML hydrogel and enhanced the hydrogel strength at 20°C due to gelation of the gelatin. The release behavior of the gelatin from the CML hydrogel could be controlled by many factors, such as the amount of gelatin, temperature, and solution pH. The weight loss of the composite hydrogel was expedited after gelatin loading and showed a positive relationship with the gelatin content. The results of in vitro cell culture in the hydrogels revealed that gelatin loading improved cell viability and promoted proliferation and glycosaminoglycans secretion of chondrocytes. This new scaffold production technology for chondrocyte encapsulation provides a further step towards CML applications in tissue engineering and other biomedical areas.     

纳米磁性壳聚糖微球固定化酵母醇脱氢酶的研究

建立了以纳米级磁性壳聚糖微球(magnetic chitosan microspheres , M-CS)为载体固定化酵母醇脱氢酶(yeast alcohol dehydrogenase,YADH)的方法,优化了YADH的固定化条件,考察了固定化酶的性质。结果表明,M-CS 呈规则的圆球形,粒径在30nm 左右,具有较好的磁响应性。酵母醇脱氢酶固定化适宜条件为:50 mg 磁性壳聚糖微球,加入20mL 0.25 mg/mL 酵母醇脱氢酶(蛋白质含量)磷酸盐缓冲液(0.05 mol/L ,pH 7.0) ,在4 ℃固定2h。M-CS 容易吸附酵母醇脱氢酶,但吸附的酶量受载体与酶的比例、溶液的离子浓度、溶液pH的影响明显,而温度对吸附的酶量的影响则相对较弱。相对于游离的酵母醇脱氢酶,固定化酶的最适温度略有升高,可明显改善其热稳定性、酸碱稳定性、操作稳定性和贮存稳定性。     

Glutaraldehyde and glyoxal cross-linked chitosan microspheres for controlled delivery of centchroman

Glutaraldehyde and glyoxal cross-linked microspheres were prepared using chitosan with different molecular weights (MWs) and degrees of deacetylation (DDAs) for sustained release of centchroman under physiological conditions. The DDA in chitosan was determined by different methods, and the samples were categorized as chitosan with low (48%), medium (62%), and high (75%) DDA. The size and shape of the microspheres were determined by scanning electron microscopy (SEM), and hydrophobicity was determined by adsorption of Rose Bengal dye on microspheres cross-linked with glutaraldehyde or glyoxal. The effect of MW, DDA, and degree of cross-linking in microspheres was studied on the degree of swelling, as well as by the loading and release of centchroman. The glyoxal cross-linked microspheres were more compact and hydrophobic and showed better sustained release in companion to chitosan microspheres and glutaraldehyde cross-linked microspheres. The linear fractional release of centchroman with the square root of time indicated a Fickian behavior of centchroman, and the microspheres also showed zero-order release kinetics for centchroman.     

Self-assembled gold nanoshells on biodegradable chitosan fibers

A novel chitosan fiber core/gold shell structural organic-inorganic composite was presented via a facile and eco-friendly approach. The chitosan fiber and gold/chitosan composites were characterized with the assistance of scanning electron microscopy and transmission electron microscopy observations. The chitosan fibers used in this study were 50 nm to 5 microm in diameter and up to hundreds of micrometers in length. The gold shells were typically 20-50 nm in depth, and their lattice fringes obliquely intersecting at an angle of 60 degrees were displayed. The formation mechanism of the as-fabricated chitosan fiber core with gold as the shell structural composites was also schematically discussed.     

Preparation of biopolymer fibers by electrospinning from room temperature ionic liquids

Electrospinning is a versatile process used to prepare micro- and nano- sized fibers from various polymers dissolved in volatile solvents. In this report, cellulose and cellulose-heparin composite fibers are prepared from nonvolatile room temperature ionic liquid (RTIL) solvents by electrospinning. RTILs are extracted from the biopolymer fiber after the fiber formation using a cosolvent. Micron to nanometer sized, branched fibers were obtained from 10% (w/w) concentration of polysaccharide biopolymer in RTIL solution with an applied voltage of 15-20 kV. Cellulose-heparin composite fibers showed anticoagulant activity, demonstrating that the bioactivity of heparin remained unaffected even on exposure to a high voltage involved in electrospinning.     

Preparation of electrospun alginate fibers with chitosan sheath

In this study, alginate (AL) fibers were electrospun and coagulated with chitosan (ChS) and ethanol using a single spinneret. These fibers exhibited a core–sheath structure that was revealed using a confocal laser scanning microscope (CLSM) and fluorescence-labeled polymers. The resulting fibers were examined using a field emission scanning electron microscope (FESEM) for the fiber size and morphology. The average diameter of the fibers ranged from 600 to 900 nm depending on the electrospinning parameters. To mimic the stability of alginate fibers in physiological fluids, the release of alginate from these fibers in normal saline was also tested. The results demonstrated that the core–sheath structure of alginate fiber can greatly reduce the degradation by 40% for 3 d in physiological environment.     

One-step partial purification of Solanum tuberosum tuber lectin using magnetic chitosan particles

A one-step procedure for a partial purification of Solanum tuberosum tuber lectin has been developed. Lectin from tuber extract or from potato wastewater was adsorbed to magnetic chitosan particles and eluted with low pH buffer. The specific activity of separated lectin increased 13 times during the purification process and the recovery was 50%.     

One-pot synthesis and characterization of cross-linked quaternized chitosan microspheres as protein adsorbent

The one-pot synthesis and characterization of cross-linked quaternized chitosan microspheres (CQCM) as a protein adsorbent are presented. First of all, chitosan particles were prepared by spray drying method, and then they were quaternized and cross-linked in turn with glycidyltrimethylammonium (GTMAC) chloride and glutaraldehyde in isopropanol containing 10% water in one-pot. The effect of the reaction temperature, reaction time and the amounts of added GTMAC and glutaraldehyde on the protein adsorption ability of CQCM was investigated. The adsorption behavior of the CQCM prepared in the optimum synthetic conditions was well described by the Langmuir isotherm with maximum adsorption capacity equal to 1424 mg BSA/g dry weight. The particle size ranged from 7.6 to 48.9 μm. The mechanism of adsorption-desorption of BSA to the CQCM was ion-exchange. Finally, the extraction of soybean peroxidase from crude soybean peroxidase solution using the CQCM was performed.     

Creation of cross-linked electrospun isotypic-elastin fibers controlled cell-differentiation with new cross-linker

Effective application of elastin materials for vascular grafts in tissue engineering requires these materials to retain the elastic and biological properties of native elastin. To clarify the influence of soluble elastin isotypes on vascular smooth muscle cells (VSMCs), soluble elastin was prepared from insoluble elastin by hydrolysis with oxalic acid. Its fractions were separated and classified into three isotypes. Elastin retaining 2.25 mol% of cross-linked structures exhibited significant differentiation of VSMCs, which adhered to the elastin with contraction phenotypes similar to that of native elastin, causing proliferation to cease. This trend was more strongly demonstrated in cotton-like elastin fibers with a new cross-linker. The results suggest that elastin isotypes could be applied as new effective biomaterials for suppressing intimal hyperplasia in vascular grafts.     

Preparation of cross-linked carboxymethyl chitosan for repairing sciatic nerve injury in rats

A successful nerve regeneration process was achieved with nerve repair tubes made up of 1-ethyl-3(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) cross-linked carboxymethyl chitosan (CM-chitosan) with improved biodegradability. Chitosan has a very slow degradation rate, while the EDC cross-linked CM-chitosan tubes degraded to 30% of original weight during 8 weeks of incubation in lysozyme solution. In vitro cell culture indicated that the CM-chitosan films presented no cytotoxicity to Schwann cells. From in vivo studies using a 10 mm rat sciatic nerve defect model investigated by histomorphometry analysis, the average diameter of the fibers and the average thickness of myelin sheath in the CM-chitosan tubes were 3.7 ± 0.33 and 0.33 ± 0.04 μm, respectively, which demonstrated equivalence to nerve autografts (the current “gold” standard); furthermore, the average fiber density in the CM-chitosan tubes was 20.5 × 10³/mm², which was similar to that of autografts (21 × 10³/mm²) and significantly higher than that of common chitosan tubes (15.3 × 10³/mm²).     

A novel electrospinning target to improve the yield of uniaxially aligned fibers

Electrospinning is a useful technique that can generate micro and nanometer‐sized fibers. Modification of the electrospinning parameters, such as deposition target geometry, can generate uniaxially aligned fibers for use in diverse applications ranging from tissue engineering to material fabrication. For example, meshes of fibers have been shown to mimic the extracellular matrix networks for use in smooth muscle cell proliferation. Further, aligned fibers can guide neurites to grow along the direction of the fibers. Here we present a novel electrospinning deposition target that combines the benefits of two previously reported electrodes: the standard parallel electrodes and the spinning wheel with a sharpened edge. This new target design significantly improves aligned fiber yield. Specifically, the target consists of two parallel aluminum plates with sharpened edges containing a bifurcating angle of 26°. Electric field computations show a larger probable area of aligned electric field vectors. This new deposition target allows fibers to deposit on a larger cross‐sectional area relative to the existing parallel electrode and at least doubles the yield of uniaxially aligned fibers. Further, fiber alignment and morphology are preserved after collection from the deposition target. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Dehydration from alcohols by polyion complex cross-linked chitosan composite membranes during evapomeation

This study describes the dehydration of an ethanol/water azeotrope during evapomeation using polyion complex cross-linked chitosan composite (q-Chito-PEO acid polyion complex/PES composite) membranes, constructed from quaternized chitosan (q-Chito) and poly(ethylene oxydiglycolic acid) (PEO acid) on a porous poly(ether sulfone) (PES) support. Both the q-Chito/PES composite and the q-Chito-PEO acid polyion complex/PES composite membranes showed high water permselectivity for an ethanol/water azeotrope. Both the permeation rate and the water permselectivity of the q-Chito/PES composite membranes were enhanced by increasing the degree of quaternization of the chitosan molecule because the affinity of the q-Chito/PES composite membranes for water was increased by introducing a quaternized ammonium group into the chitosan molecule. q-Chito-PEO acid polyion complex/PES composite membranes prepared from an equimolar ratio of carboxylate groups in the PEO acid versus quaternized ammonium groups in the q-Chito showed the maximum separation factor for water permselectivity without lowering the permeation rate. With an increasing molecular weight of PEO acid, the separation factor for water permselectivity increased, but the permeation rate almost did not change. The mechanism responsible for the separation of an ethanol/water azeotrope through the q-Chito-PEO acid polyion complex/PES composite membranes was analyzed by the solution-diffusion model. The permeation rate, separation factor for water permselectivity, and evapomeation index of q-Chito-PEO acid 400 polyion complex/PES composite membrane with an equimolar ratio of carboxylate groups in PEO acid 400 and ammonium groups in q-Chito were 3.5 x 10(-1) kg/(m(2) hr), 6300, and 2205, respectively, and very high membrane performance. The separation factor for water permselectivity for aqueous solutions of n-propyl and isopropyl alcohol was also maximized at an equimolar ratio of carboxylate groups and ammonium groups and was greater than that for an ethanol/water azeotrope. The above results were discussed from the viewpoint of the physical and chemical structure of the q-Chito-PEO acid polyion complex/PES composite membranes and the permeants.     

Preparation and properties of alginate/carboxymethyl chitosan blend fibers

Alginate/carboxymethyl chitosan blend fibers, prepared by spinning their mixture solution through a viscose-type spinneret into a coagulating bath containing aqueous CaCl₂, were studied for structure and properties with the aid of infrared spectroscopy (IR), X-ray diffraction (XRD) and scanning electron micrography (SEM). The analyses indicated a good miscibility between alginate and carboxymethyl chitosan, because of the strong interaction from the intermolecular hydrogen bonds. The best values of the dry tensile strength and breaking elongation were obtained when carboxymethyl chitosan content was 30 and 10 wt%, respectively. The wet tensile strength and breaking elongation decreased with the increase of carboxymethyl chitosan content. Introduction of CM-chitosan in the blend fiber improved water-retention properties of blend fiber compared to pure alginate fiber. Antibacterial fibers, obtained by treating the fibres with aqueous solution of N-(2-hydroxy)-propyl-3-trimethylammonium chitosan chloride and silver nitrate, respectively, exhibited good antibacterial activity to Staphylococcus aureus.     

Survival and differentiation of neuroepithelial stem cells on chitosan bicomponent fibers

Chitosan is a popular biomaterial used in tissue engineering. Fibers of chitosan could provide a favorable anatomical substrate for cell growth which provides a promising application for axonal regeneration during peripheral injury. Neuroepithelial stem cells (NEPs) are the most primitive neural stem cells with multipotential for neuronal and glia differentiation. To assess the biocompatibility between NEPs and chitosan fibers, and to explore whether the NEPs have the ability to differentiation on chitosan fibers, NEPs were harvested from the neural tube and seeded on chitosan fibers in in vitro culture. The biocompatibility of chitosan fibers was tested by MTT assays. The growth and survival were observed by light and scanning electronic microscope at different times in culture. And, the differentiation of NEPs was examined by immunocytochemical staining. The results indicated that NEPs could grow on the chitosan fibers and attach firmly to the surface of fibers. On chitosan fibers, NEPs could differentiate into neurons and glia. Our study demonstrated that chitasan fibers had a good biocompatibility with NEPs which affords a potential alternative for the repair of peripheral nerve injury.     

Adsorption behaviour of Fe(II) and Fe(III) ions in aqueous solution on chitosan and cross-linked chitosan beads

A batch adsorption system was applied to study the adsorption of Fe(II) and Fe(III) ions from aqueous solution by chitosan and cross-linked chitosan beads. The adsorption capacities and rates of Fe(II) and Fe(III) ions onto chitosan and cross-linked chitosan beads were evaluated. Chitosan beads were cross-linked with glutaraldehyde (GLA), epichlorohydrin (ECH) and ethylene glycol diglycidyl ether (EGDE) in order to enhance the chemical resistance and mechanical strength of chitosan beads. Experiments were carried out as function of pH, agitation period, agitation rate and concentration of Fe(II) and Fe(III) ions. Langmuir and Freundlich adsorption models were applied to describe the isotherms and isotherm constants. Equilibrium data agreed very well with the Langmuir model. The kinetic experimental data correlated well with the second-order kinetic model, indicating that the chemical sorption was the rate-limiting step. Results also showed that chitosan and cross-linked chitosan beads were favourable adsorbers.     

Fabrication of core-sheath structured fibers for model drug release and tissue engineering by emulsion electrospinning

A nanofibrous core-sheath structured scaffold incorporated with bioactive agents is supposed to promote cell migration, proliferation, and gene expressions through the controllable and sustainable release of bioactive agents from the fibers and the preservation of bioactivity. Here we present a novel and effective emulsion electrospinning method for obtaining fluorescein isothiocyanate-dextran (FITC-dextran)/poly(lactic-co-glycolic acid) (PLGA) and type I collagen/PLGA fibrous composite scaffolds. Core-sheath structured fibers with average diameters of 665 nm for FITC-dextran/PLGA and 567 nm for collagen/PLGA were successfully fabricated. In vitro-release profile shows sustained release of encapsulated FITC-dextran from FITC-dextran/PLGA fibers for as long as 7 weeks. The osteoblastic activity of the collagen/PLGA nanofibrous scaffold was investigated employing the osteoblastic-like MC3T3-E1 cell line. The results of the lactate dehydrogenase assay suggested excellent cytocompatibility. Cell proliferation and alkaline phosphatase activity were also ameliorated on this emulsion-electrospun collagen/PLGA fibrous scaffold. All the results indicated that this composite scaffold could support the early stages of osteoblast behavior as well as the immediate/late stages. The emulsion electrospinning process has potential for application in drug-release devices and as a 3-D scaffold in bone regeneration.     

Cross-linking chitosan into UV-irradiated cellulose fibers for the preparation of antimicrobial-finished textiles

Chitosan cross-linked cellulose fibers were prepared using non-toxic procedures in order to confer antimicrobial properties to cellulose fibers. Citric acid was used as the cross-linker and NaH₂PO₄ as catalyst in previously UV-irradiated cellulose fibers. Further heat dried-cure process and washing with detergent, water and acetic acid (0.1 M) gave a maximum incorporation of chitosan of 27 mg per gram of functionalized textile. The thermogravimetric analysis of the material with the highest chitosan content showed an increased thermal stability compared to cellulose and chitosan. The UV-irradiation induced morphological changes, such as less entangled cellulose fibers, as observed by scanning electron microscopy, which was prompted to enhance the chitosan incorporation. The biomass and spore germination percentage of Penicillium chrysogenum and colony forming units per millilitre for Escherichia coli decreased significantly on the composed materials as compared to raw cellulose fiber and it was similar to that obtained with a commercial antimicrobial cellulose fiber.