Cre levels limit packaging signal excision efficiency in the Cre/loxP helper-dependent adenoviral vector system

Helper-dependent (HD) adenovirus vectors devoid of all viral coding sequences have a large cloning capacity and provide long-term transgene expression in vivo with negligible toxicity, making them attractive vectors for gene therapy. Currently, the most efficient means of producing HD vectors involves coinfecting 293 cells expressing Cre with the HD vector and a helper virus bearing a packaging signal flanked by loxP sites. Cre-mediated packaging signal excision renders the helper virus genome unpackageable but still able to replicate and provide helper functions for HD vector propagation. Typically, helper virus contamination is < or =1% pre- and < or =0.1% postpurification by CsCl banding. While these contamination levels are low, further reduction is desirable. However, this objective has not been realized since the Cre/loxP system was first developed. This lack of progress is due, at least in part, to our lack of understanding of the origins of the contaminating helper virus, thus rendering its reduction or elimination difficult to achieve. This study was designed to investigate the possible sources of contaminating helper virus persisting during HD vector amplification. The results revealed that Cre is limiting in helper virus-infected Cre-expressing 293 cells, thereby permitting helper viruses to escape packaging signal excision and propagate. The results of this study should provide a foundation for developing rational strategies to further reduce or possibly eliminate the contaminating helper virus.     

Impact of E1 and Cre on Adenovirus Vector Amplification: Developing MDCK CAV-2-E1 and E1-Cre Transcomplementing Cell Lines

Adenovirus vectors have been extensively studied through the manipulation of viral genome. However, little attention is being paid to their producer cell-lines; cells are selected according to virus yields, neglecting the expression profile of transcomplementing gene products underlying cell performance. This work evaluates the impact of E1 (E1A and E1B) and Cre recombinase levels in the production of E1-deleted and helper-dependent canine adenovirus type 2 (CAV-2) vectors using MDCK cells. E1A and E1B gene expression and Cre activity were evaluated in different cell clones and compared with the corresponding cell productivity and susceptibility to oxidative stress injury. CAV-2 production was proportional to E1A expression (the highest levels of E1A corresponding to productivities of 3000–5000 I.P./cell), while E1B prolonged host cell viability after infection, conferring protection against apoptosis. Cre recombinase counteracted E1B anti-apoptotic properties, however viral production was maintained under high levels of Cre. Yet, Cre recombinase side effects can be reduced using cell lines with lower Cre-activities, without compromising the excision efficiency of helper vector packaging signal. These results highlight the influence of transcomplementing gene products on CAV-2 producer cell line performance, and the ability to express high levels of E1A and E1B as an important feature for cell line establishment and high adenovirus titers.     

Efficient generation and amplification of high-capacity adeno-associated virus/adenovirus hybrid vectors

Effective gene therapy is dependent on safe gene delivery vehicles that can achieve efficient transduction and sustained transgene expression. We are developing a hybrid viral vector system that combines in a single particle the large cloning capacity and efficient cell cycle-independent nuclear gene delivery of adenovirus (Ad) vectors with the long-term transgene expression and lack of viral genes of adeno-associated virus (AAV) vectors. The strategy being pursued relies on coupling the AAV DNA replication mechanism to the Ad encapsidation process through packaging of AAV-dependent replicative intermediates provided with Ad packaging elements into Ad capsids. The generation of these high-capacity AAV/Ad hybrid vectors takes place in Ad early region 1 (E1)-expressing cells and requires an Ad vector with E1 deleted to complement in trans both AAV helper functions and Ad structural proteins. The dependence on a replicating helper Ad vector leads to the contamination of AAV/Ad hybrid vector preparations with a large excess of helper Ad particles. This renders the further propagation and ultimate use of these gene delivery vehicles very difficult. Here, we show that Cre/loxP-mediated genetic selection against the packaging of helper Ad DNA can reduce helper Ad vector contamination by 99.98% without compromising hybrid vector rescue. This allowed amplification of high-capacity AAV/Ad hybrid vectors to high titers in a single round of propagation.     

Feasibility of Generating Adeno-Associated Virus Packaging Cell Lines Containing Inducible Adenovirus Helper Genes

The adeno-associated virus (AAV) vector system is based on nonpathogenic and helper-virus-dependent parvoviruses. The vector system offers safe, efficient, and long-term in vivo gene transfer in numerous tissues. Clinical trials using AAV vectors have demonstrated vector safety as well as efficiency. The increasing interest in the use of AAV for clinical studies demands large quantities of vectors and hence a need for improvement in vector production. The commonly used transient-transfection method, although versatile and free of adenovirus (Ad), is not cost-effective for large-scale production. While the wild-type-Ad-dependent AAV producer cell lines seem to be cost-effective, this method faces the problem of wild-type Ad contamination. To overcome these shortcomings, we have explored the feasibility of creating inducible AAV packaging cell lines that require neither transfection nor helper virus infection. As a first step toward that goal, we have created a cell line containing highly inducible Ad E1A and E1B genes, which are essential for AAV production. Subsequently, the AAV Rep and Cap genes and an AAV vector containing a green fluorescent protein (GFP) reporter gene were stably introduced into the E1A-E1B cell line, generating inducible AAV-GFP packaging cell lines. Upon induction of E1A and E1B genes and infection with replication-defective Ad with E1A, E1B, and E3 deleted, the packaging cells yielded high-titer AAV-GFP vectors. Finally, the E2, E4, and VA genes of Ad, under the control of their endogenous promoters, were also introduced into these cells. A few producer cell lines were obtained, which could produce AAV-GFP vectors upon simple drug induction. Although future improvement is necessary to increase the stability and vector yield of the cells, our study has nonetheless demonstrated the feasibility of generating helper-virus-free inducible AAV producer cell lines.     

Packaging Cells Based on Inducible Gene Amplification for the Production of Adeno-Associated Virus Vectors

Although vectors based on adeno-associated virus (AAV) offer several unique advantages, their usage has been hampered by the difficulties encountered in vector production. In this report, we describe a new AAV packaging system based on inducible amplification of integrated helper and vector constructs containing the simian virus 40 (SV40) replication origin. The packaging and producer cell lines developed express SV40 T antigen under the control of the reverse tetracycline transactivator system, which allows inducible amplification of chromosomal loci linked to the SV40 origin. Culturing these cells in the presence of doxycycline followed by adenovirus infection resulted in helper and vector gene amplification as well as higher vector titers. Clonal producer cell lines generated vector titers that were 10 times higher than those obtained by standard methods, with approximately 10⁴ vector particles produced per cell. These stocks were free of detectable replication-competent virus. The lack of a transfection step combined with the reproducibility of stable producer lines makes this packaging method ideally suited for the large-scale production of vector stocks for human gene therapy.     

包装信号可以被Cre重组酶切除的辅助性腺病毒的构建及鉴定

目的:为了探索构建第三代复制依赖性腺病毒载体系统的有效实验方法,利用细菌内重组原理,分别构建了第三代腺病毒生产体系中的辅助性腺病毒和表达Cre重组酶的真核表达载体,并分析了Cre切除辅助病毒包装信号的有效性。方法:通过PCR及酶处理法依次将2个同向的loxP位点及绿色荧光蛋白表达盒克隆至pShuttle穿梭载体质粒,按照AdEasy系统的标准实验方法产生和扩增辅助病毒;同时构建pcDNA3.1(+)-cre真核表达载体,并用该载体经脂质体法转染HEK293细胞,通过PCR和流式细胞术分析转染细胞内表达的Cre重组酶对随后感染的辅助病毒的包装信号的切除作用。结果:构建的辅助性腺病毒能够在HEK293细胞内扩增,其包装信号可以由细胞内表达的Cre重组酶有效切除。结论:构建了辅助性腺病毒和pcDNA3.1(+)-cre真核表达载体,为第三代腺病毒的生产奠定了实验基础。     

Production of helper-dependent adenovirus vector relies on helper virus structure and complementing

Background

The helper‐dependent (HD) adenoviral (Ad) vector relies on a helper virus to provide viral proteins for vector amplification. HD‐Ad vectors can significantly increase therapeutic gene expression and improve safety. However, the yield of an HD‐Ad vector is generally lower than that of an E1‐deleted first‐generation vector, likely due to the alterations in viral E3 or packaging regions of a helper virus that attenuate its replication and complementing for an HD‐Ad vector.

Methods

To study this question and improve HD‐Ad vector production, we have generated four different helper viruses with a wild‐type or deleted E3 region, and with a relocated loxP. We have also constructed a first‐generation vector with a wild‐type E3 region and without the loxP site. We compared the replication of these viruses in Cre‐positive and ‐negative cells and studied their complementing for HD‐Ad vector production.

Results

Viruses with deleted E3 formed smaller plaques and produced lower titer compared with viruses containing the E3 region. The site where a loxP is inserted can also affect virus replication. Higher yield of HD‐Ad vector was obtained when a helper virus with wild‐type E3 was used. We also showed that deletion of the packaging signal in a helper virus through loxP/Cre interaction decreased the viral DNA complementing ability.

Conclusions

Although the E3 region is not essential for adenovirus replication in vivo, deletion of this region attenuates virus replication. Production of HD‐Ad vector can be further improved by modifications in helper virus structure. Copyright © 2002 John Wiley & Sons, Ltd.

     

Construction of adenovirus vectors through Cre-lox recombination.

Two barriers prevent adenovirus-based vectors from having wide application. One is the difficulty of making new adenoviruses, and the second is the strong immunological reaction to viral proteins. Here we describe uses of Cre-lox recombination to overcome these problems. First, we demonstrate a simple method for constructing E1-substituted adenoviruses. Second, we demonstrate a method to construct adenovirus vectors carrying recombinant genes in place of all of the viral genes, so-called gutless adenovirus vectors. The pivotal feature in each method is the use of a negatively selected adenovirus named psi5. We engineered a cis-acting selection into psi5 by flanking its packaging site with loxP sites. When psi5 was grown in cells making a high level of Cre recombinase, the packaging site was deleted by recombination and the yield of psi5 was reduced to 5% of the wild-type level. To make a new E1-substituted virus, we used psi5 as a donor virus and recombined it with a shuttle vector via a loxP site. The resulting recombinant virus has a single loxP site next to the packaging site and therefore outgrows psi5 in the presence of Cre recombinase. To make a gutless virus, we used psi5 as a helper virus. The only viral sequences included in the gutless vector are those needed in cis for its replication and packaging. We found that a loxP site next to the packaging site of the gutless virus was necessary to neutralize homologous recombination between psi5 and the gutless viruses within their packaging domains.     

Optimisation of a multipartite human immunodeficiency virus based vector system; control of virus infectivity and large-scale production

BACKGROUND: We have previously described a five-plasmid HIV-1 vector system that utilises a codon-optimised gagpol gene. While this system was shown to be safer than systems using proviral type helpers, the titre of virus produced was relatively low. Therefore, a process of optimising all aspects of virus production was initiated. METHODS: A systematic approach was taken to the optimisation of virus production by transient expression using a five-plasmid packaging system. Codon-manipulation was used to reduce homology between helper and vector constructs. Ultrafiltration and ultracentrifugation were used for large-scale virus production. RESULTS: We describe codon-optimised reading frames for Tat and Rev and the optimisation of virus production. The optimisation process resulted in an increase in virus titre of 7- to 8-fold. Several other approaches to increasing viral titre described by others proved ineffective in our system after it had been optimised. In addition, we show that by varying the ratio of the GagPol helper construct to vector, the infectivity of the virus could be controlled. The use of a novel codon-optimised HIV-1 GagPol expression construct with reduced homology to vector sequences significantly reduced transfer of gagpol sequences to transduced cells. Virus could be collected in serum-free medium without a significant loss of titre, which facilitated subsequent processing. Processing using a combination of ultrafiltration and ultracentrifugation allowed efficient and rapid processing of litre volumes of virus supernatant. CONCLUSIONS: By taking a systematic approach to optimising all aspects of our five-plasmid lentiviral vector system we improved titre, safety, large-scale production, and demonstrated that infectivity could be specifically controlled.     

Gutted adenoviral vector growth using E1/E2b/E3-deleted helper viruses

Background

Helper‐dependent, or gutted, adenoviruses (Ad) lack viral coding sequences, resulting in reduced immunotoxicity compared with conventional Ad vectors. Gutted Ad growth requires a conventional Ad to supply replication and packaging functions in trans. Methods that allow high‐titer growth of gutted vectors while reducing helper contamination, and which use safer helper viruses, will facilitate the use of gutted Ad vectors in vivo.

Methods

Replication‐defective helper viruses were generated that are deleted for Ad E1, E2b and E3 genes, but which contain loxP sites flanking the packaging signal. Complementing Ad packaging cell lines (C7‐cre cells) were also generated by transfecting 293 cells with the Ad E2b genes encoding DNA polymerase and pre‐terminal protein, and with a cre‐recombinase plasmid.

Results

We show that C7‐cre cells allow efficient production of gutted Ad using ΔE1 + ΔE2b + ΔE3 helper viruses whose growth can be limited by cre‐loxP‐mediated excision of the packaging signal. Gutted Ad vectors carrying ～28 kb cassettes expressing full‐length dystrophin were prepared at high titers, similar to those obtained with E2b+ helpers, with a resulting helper contamination of <1%.

Conclusions

These new packaging cell lines and helper viruses offer several significant advantages for gutted Ad vector production. They allow gutted virus amplification using a reduced number of passages, which should reduce the chances of selecting rearranged products. Furthermore, the residual helper contamination in gutted vector preparations should be less able to elicit immunological reactions upon delivery to tissues, since E2b‐deleted vectors display a profound reduction in viral gene expression. Copyright © 2002 John Wiley & Sons, Ltd.

     

High-efficiency system for the construction of adenovirus vectors and its application to the generation of representative adenovirus-based cDNA expression libraries

We here describe a convenient system for the production of recombinant adenovirus vectors and its use for the construction of a representative adenovirus-based cDNA expression library. The system is based on direct site-specific insertion of transgene cassettes into a replicating donor virus. The transgene is inserted into a donor plasmid containing the viral 5' inverted terminal repeat, the complete viral packaging signal, and a single loxP site. The plasmid is then transfected into a Cre recombinase-expressing packaging cell line that has been infected with a donor virus containing a partially deleted packaging signal flanked by loxP sites. Cre recombinase, by two steps of action, sequentially catalyzes the generation of a nonpackageable donor virus acceptor substrate and the generation of the desired recombinant adenovirus vector. Due to its growth impairment, residual donor virus can efficiently be counterselected during amplification of the recombinant adenovirus vector. By using this adenovirus construction system, a plasmid-based human liver cDNA library was converted by a single step into an adenovirus-based cDNA expression library with about 10(6) independent adenovirus clones. The high-titer purified library was shown to contain about 44% of full-length cDNAs with an average insert size of 1.3 kb. cDNAs of a gene expressed at a high level (human alpha(1)-antitrypsin) and a gene expressed at a relatively low level (human coagulation factor IX) in human liver were isolated from the adenovirus-based library using an enzyme-linked immunosorbent assay-based screening procedure.     

Production of lentiviral vectors by transient expression of minimal packaging genes from recombinant adenoviruses

BACKGROUND: The potential of lentiviral vectors for clinical gene therapy has not yet been evaluated. One of the reasons is the cytotoxicity of lentiviral packaging genes which makes the generation of stable producer cell lines difficult. Therefore, a novel packaging system for lentiviral vectors based on transient expression of packaging genes by recombinant adenoviruses was developed. METHODS: Adenoviral vectors expressing VSV-G, codon-optimized HIV-1 gag-pol, and codon-optimized SIV gag-pol under the control of a tetracycline-regulatable promoter (adenoviral lenti-pack vectors) were constructed and the production levels of this vector system were evaluated. RESULTS: The generated adenoviral lenti-pack vectors could be grown to high titers when transgene expression was suppressed and no evidence for instabilities was obtained. Cells stably transfected with a SIV-based vector construct were converted into lentiviral vector producer cells by infection with the adenoviral lenti-pack vectors. Lentiviral vector titers obtained were as high as vector titers obtained by transient cotransfection experiments. A protocol was developed that allowed preparation of lentiviral vector stocks with undetectable levels of contaminating adenoviral lenti-pack vectors. CONCLUSIONS: The adenoviral lenti-pack vectors described should provide a convenient alternative approach to inducible packaging cell lines for large-scale lentiviral vector production. Transient expression of cytotoxic lentiviral packaging genes by the adenoviral lenti-pack vectors circumvents loss of titers during prolonged culture of packaging cell lines. The design of the adenoviral lenti-pack vectors should reduce the risk of transfer of packaging genes to target cells and at the same time provide flexibility with respect to the lentiviral vector constructs that can be packaged.     

Separate control of rep and cap expression using mutant and wild-type LoxP sequences and improved packaging system for adeno-associated virus vector production

Adeno-associated virus (AAV) vectors are a practical choice for gene transfer, and demand for them is increasing. To cope with the necessity in the near future, we have developed a number of approaches to establish packaging cell lines for the production of AAV vectors. In our previous study, a highly regulated expression of large Rep proteins was obtained by using the Cre-loxP switching system. Therefore, in the present study, to regulate Cap expression as well, we developed an inducible expression system for both Rep and Cap proteins by using an additional set of mutant loxP sequences. The mutants possess two base alterations in the spacer region of loxP and recombine specifically with the same counterpart in the presence of Cre. By using two separate plasmids, one with mutant and the other with wild-type loxP sequences, the expression of two different proteins can be induced simultaneously by Cre recombinase. When the LacZencoding plasmid vector was used as a packaging model, a significant packaging titer of 2.1 × 10¹⁰ genome copies per 10-cm dish was obtained. These results indicate the importance of controlling Cap expression, in addition to Rep, to achieve an optimum production rate for AAV vectors.     

Development of high-titer retroviral producer cell lines by using Cre-mediated recombination.

Retroviral gene transfer is widely used in experimental and human gene therapy applications. We have devised a novel method of generating high-titer retroviral producer cell lines based on the P1 bacteriophage recombinase system Cre-loxP. Incorporation of loxP sites flanking a Neo(r)-SVTK cassette in the proviral DNA allows excision of these selectable markers through expression of Cre recombinase after production of a high-titer producer cell line. The resultant producer line contains a single loxP site flanked by the viral long terminal repeats. Retransfection of this line with the Cre expression vector and a plasmid containing a gene of interest flanked by loxP sites allows insertional recombination of the gene into the favorable preexisting site in the genome and the generation of a new line with a titer equivalent to that of the parental producer cell line. The efficiency of the process is sufficient to allow the generation of multiple new producer lines without the addition of antibiotic resistance genes. We have successfully generated retroviral vectors carrying different genes by using this approach and discuss the potential applications of this method in gene therapy.     

An Enhanced Packaging System for Helper-Dependent Herpes Simplex Virus Vectors

Helper-dependent herpes simplex virus (HSV) vectors (amplicons) show considerable promise to provide for long-term transduced-gene expression in most cell types. The current packaging system of choice for these vectors involves cotransfection with a set of five overlapping cosmids that encode the full HSV type 1 (HSV-1) helper virus genome from which the packaging (pac) elements have been deleted. Although both the helper virus and the HSV amplicon can replicate, only the latter is packaged into infectious viral particles. Since the titers obtained are too low for practical application, an enhanced second-generation packaging system was developed by modifying both the helper virus and the HSV amplicon vector. The helper virus was reverse engineered by using the original five cosmids to generate a single HSV-bacterial artificial chromosome (BAC) clone in Escherichia coli from which the pac elements were deleted to generate a replication-proficient but packaging-defective HSV-1 genome. The HSV amplicon was modified to contain the simian virus 40 origin of replication, which acts as an HSV-independent replicon to provide for the replicative expansion of the vector. The HSV amplicon is packaged into infectious particles by cotransfection with the HSV-BAC helper virus into the 293T cell line, and the resulting cell lysate is free of detectable helper virus contamination. The combination of both modifications to the original packaging system affords an eightfold increase in the packaged-vector yield.     

A helper virus-free packaging system for recombinant adeno-associated virus vectors

Adeno-associated virus (AAV) is a human parvovirus that is currently receiving widespread attention for its potential use as a gene therapy vector. Construction of the recombinant AAV vector (rAAV) involves replacing most of the viral genome with a transgene of interest and then packaging this recombinant genome into an infectious virion. Most current protocols for generating rAAV entail the co-transfection of a vector plasmid and a packaging plasmid that expresses the viral replication and structural genes onto adenovirus (Ad) infected cells growing in culture. Limitations of this procedure include (1) contamination of rAAV with the Ad helper virus, (2) low yields of rAAV and (3) production of replication-competent AAV. In this report we describe new helper plasmids (pSH3 and pSH5) that eliminate the Ad co-infection requirement. The helper plasmids express the AAV rep and cap genes and the Ad E2A, VAI and E4 genes. When the helper plasmids are co-transfected onto human 293 cells with a vector plasmid in the absence of Ad infection, the rAAV vector yield is up to 80-fold greater than those obtained with the pAAV/Ad packaging plasmid. Moreover, replication competent AAV in the rAAV preparations is less than 0.00125%. The major advantages of this system are (1) the absence of infectious adenovirus and (2) the use of only two plasmids, which enhances transfection efficiencies and hence vector production. We believe that this two-plasmid transfection system will allow for more widespread use of the AAV vector system because of its simplicity and high yields. This system will be especially useful for preclinical analyses of multiple rAAV vectors.     

Helper virus-free transfer of herpes simplex virus type 1 plasmid vectors into neural cells.

Herpes simplex virus type 1 (HSV-1) plasmid vectors have promise for genetic intervention in the brain, but several problems caused by the helper virus have compromised their utility. To develop a helper virus-free packaging system for these vectors, the DNA cleavage/packaging signals were deleted from a set of cosmids that represents the HSV-1 genome. Following cotransfection into cells, this modified cosmid set supported replication and packaging of vector DNA. However, in the absence of the DNA cleavage/packaging signals, the HSV-1 genome was not packaged, and consequently vector stocks were free of detectable helper virus. In the absence of helper virus, the vectors efficiently infected rat neural cells in culture or in the brain with minimal cytopathic effects. beta-galactosidase-positive cells were observed for at least 1 month in vivo, and vector DNA persisted for this period. This system may facilitate studies on neuronal physiology and potential therapeutic applications.     

Expression of IMP1 enhances production of murine leukemia virus vector by facilitating viral genomic RNA packaging

Murine leukemia virus (MLV)-based retroviral vector is widely used for gene transfer. Efficient packaging of the genomic RNA is critical for production of high-titer virus. Here, we report that expression of the insulin-like growth factor II mRNA binding protein 1 (IMP1) enhanced the production of infectious MLV vector. Overexpression of IMP1 increased the stability of viral genomic RNA in virus producer cells and packaging of the RNA into progeny virus in a dose-dependent manner. Downregulation of IMP1 in virus producer cells resulted in reduced production of the retroviral vector. These results indicate that IMP1 plays a role in regulating the packaging of MLV genomic RNA and can be used for improving production of retroviral vectors.