Prediction of folding mechanisms for Ig-like beta sandwich proteins based on inter-residue average distance statistics methods

To understand the folding mechanism of a protein is one of the goals in bioinformatics study. Nowadays, it is enigmatic and difficult to extract folding information from amino acid sequence using standard bioinformatics techniques or even experimental protocols which can be time consuming. To overcome these problems, we aim to extract the initial folding unit for titin protein (Ig and fnIII domains) by means of inter-residue average distance statistics, Average Distance Map (ADM) and contact frequency analysis (F-value). TI I27 and TNfn3 domains are used to represent the Ig-domain and fnIII-domain, respectively. Beta-strands 2, 3, 5, and 6 are significant for the initial folding processes of TI I27. The central strands of TNfn3 were predicted as a primary folding segment. Known 3D structure and unknown 3D structure domains were investigated by structure or non-structure based multiple sequence alignment, respectively, to learn the conserved hydrophobic residues and predicted compact region relevant to evolution. Our results show good correspondence to experimental data, phi-value and protection factor from H-D exchange experiments. The significance of conserved hydrophobic residues near F-value peaks for structural stability using hydrophobic packing is confirmed. Our prediction methods once again could extract a folding mechanism only knowing the amino acid sequence.     

A minimal physically realistic protein-like lattice model: designing an energy landscape that ensures all-or-none folding to a unique native state

A simple protein model restricted to the face-centered cubic lattice has been studied. The model interaction scheme includes attractive interactions between hydrophobic (H) residues, repulsive interactions between hydrophobic and polar (P) residues, and orientation-dependent P-P interactions. Additionally, there is a potential that favors extended beta-type conformations. A sequence has been designed that adopts a native structure, consisting of an antiparallel, six-member Greek-key beta-barrel with protein-like structural degeneracy. It has been shown that the proposed model is a minimal one, i.e., all the above listed types of interactions are necessary for cooperative (all-or-none) type folding to the native state. Simulations were performed via the Replica Exchange Monte Carlo method and the numerical data analyzed via a multihistogram method.     

Desolvation and Development of Specific Hydrophobic Core Packing during Im7 Folding

Development of a tightly packed hydrophobic core drives the folding of water-soluble globular proteins and is a key determinant of protein stability. Despite this, there remains much to be learnt about how and when the hydrophobic core becomes desolvated and tightly packed during protein folding. We have used the bacterial immunity protein Im7 to examine the specificity of hydrophobic core packing during folding. This small, four-helix protein has previously been shown to fold via a compact three-helical intermediate state. Here, overpacking substitutions, in which residue side-chain size is increased, were used to examine the specificity and malleability of core packing in the folding intermediate and rate-limiting transition state. In parallel, polar groups were introduced into the Im7 hydrophobic core via Val→Thr or Phe→Tyr substitutions and used to determine the solvation status of core residues at different stages of folding. Over 30 Im7 variants were created allowing both series of substitutions to cover all regions of the protein structure. Φ-value analysis demonstrated that the major changes in Im7 core solvation occur prior to the population of the folding intermediate, with key regions involved in docking of the short helix III remaining solvent-exposed until after the rate-limiting transition state has been traversed. In contrast, overpacking core residues revealed that some regions of the native Im7 core are remarkably malleable to increases in side-chain volume. Overpacking residues in other regions of the Im7 core result in substantial (> 2.5 kJ mol^− 1) destabilisation of the native structure or even prevents efficient folding to the native state. This study provides new insights into Im7 folding; demonstrating that whilst desolvation occurs early during folding, adoption of a specifically packed core is achieved only at the very last step in the folding mechanism.     

Amino Acid Insertion Reveals a Necessary Three-Helical Intermediate in the Folding Pathway of the Colicin E7 Immunity Protein Im7

The small (87-residue) α-helical protein Im7 (an inhibitor protein for colicin E7 that provides immunity to cells producing colicin E7) folds via a three-state mechanism involving an on-pathway intermediate. This kinetic intermediate contains three of four native helices that are oriented in a non-native manner so as to minimise exposed hydrophobic surface area at this point in folding. The short (6-residue) helix III has been shown to be unstructured in the intermediate ensemble and does not dock onto the developing hydrophobic core until after the rate-limiting transition state has been traversed. After helix III has docked, it adopts an α-helical secondary structure, and the side chains of residues within this region provide contacts that are crucial to native-state stability. In order to probe further the role of helix III in the folding mechanism of Im7, we created a variant that contains an eight-amino-acid polyalanine-like helix stabilised by a Glu-Arg salt bridge and an Asn-Pro-Gly capping motif, juxtaposed C-terminal to the natural 6-residue helix III. The effect of this insertion on the structure of the native protein and its folding mechanism were studied using NMR and ?-value analysis, respectively. The results reveal a robust native structure that is not perturbed by the presence of the extended helix III. Mutational analysis performed to probe the folding mechanism of the redesigned protein revealed a conserved mechanism involving the canonical three-helical intermediate. The results suggest that folding via a three-helical species stabilised by both native and non-native interactions is an essential feature of Im7 folding, independent of the helical propensity of helix III.     

Temperature and pressure denaturation of chignolin: Folding and unfolding simulation by multibaric-multithermal molecular dynamics method

A multibaric‐multithermal molecular dynamics (MD) simulation of a 10‐residue protein, chignolin, was performed. All‐atom model with the Amber parm99SB force field was used for the protein and the TIP3P model was used for the explicit water molecules. This MD simulation covered wide ranges of temperature between 260 and 560 K and pressure between 0.1 and 600 MPa and sampled many conformations without getting trapped in local‐minimum free‐energy states. Folding events to the native β‐hairpin structure occurred five times and unfolding events were observed four times. As the temperature and/or pressure increases, fraction of folded chignolin decreases. The partial molar enthalpy change ΔH and partial molar volume change ΔV of unfolding were calculated as ΔH = 24.1 ± 4.9 kJ/mol and ΔV = ?5.6 ± 1.5 cm³/mol, respectively. These values agree well with recent experimental results. Illustrating typical local‐minimum free‐energy conformations, folding and unfolding pathways were revealed. When chignolin unfolds from the β‐hairpin structure, only the C terminus or both C and N termini open first. It may undergo an α‐helix or 3₁₀‐helix structure and finally unfolds to the extended structure. Difference of the mechanism between temperature denaturation and pressure denaturation is also discussed. Temperature denaturation is caused by making the protein transferred to a higher entropy state and making it move around more with larger space. The reason for pressure denaturation is that water molecules approach the hydrophobic residues, which are not well hydrated at the folded state, and some hydrophobic contacts are broken. Proteins 2012;. © 2012 Wiley Periodicals, Inc.     

Repacking of hydrophobic residues in a stable mutant of apocytochrome b562 selected by phage-display and proteolysis

To test a hydrophobic core-directed protein design approach, we previously have used phage-display and proteolysis to select stably folded proteins from a library of mutants of apocytochrome b562. The consensus sequence of the selected mutants has hydrophilic residues at two of the three positions that are designed to form a hydrophobic core. To understand this unexpected result, we determined the high-resolution structure of one of the selected mutants using multi-dimensional nuclear magnetic resonance (NMR). The structure shows that the two hydrophilic residues in the consensus sequence were on the surface of the structure. Instead, two of their neighboring hydrophobic residues reorganized their side-chain conformations and formed the hydrophobic core. This result suggests that the hydrophobic core-directed protein design by phage-display and proteolysis is a valid method in general but alternative hydrophobic packing needs to be considered in the initial design. The unexpected repacking of the hydrophobic residues also highlights the plastic nature of protein structures.     

Analysis on folding of misgurin using two-dimensional HP model

Misgurin is an antimicrobial peptide from the loach, while the hydrophobic-polar (HP) model is a way to study the folding conformations and native states in peptide and protein although several amino acids cannot be classified either hydrophobic or polar. Practically, the HP model requires extremely intensive computations, thus it has yet to be used widely. In this study, we use the two-dimensional HP model to analyze all possible folding conformations and native states of misgurin with conversion of natural amino acids according to the normalized amino acid hydrophobicity index as well as the shortest benchmark HP sequence. The results show that the conversion of misgurin into HP sequence with glycine as hydrophobic amino acid at pH 2 has 1212 folding conformations with the same native state of minimal energy -6; the conversion of glycine as polar amino acid at pH 2 has 13,386 folding conformations with three native states of minimal energy -5; the conversion of glycine as hydrophobic amino acid at pH 7 has 2538 folding conformations with three native states of minimal energy -5; and the conversion of glycine as polar amino acid at pH 7 has 12,852 folding conformations with three native states of minimal energy -4. Those native states can be ranked according to the normalized amino acid hydrophobicity index. The detailed discussions suggest two ways to modify misgurin.     

Learning about protein folding via potential functions

Over the last few years we have developed an empirical potential function that solves the protein structure recognition problem: given the sequence for an n-residue globular protein and a collection of plausible protein conformations, including the native conformation for that sequence, identify the correct, native conformation. Having determined this potential on the basis of only some 6500 native/nonnative pairs of structures for 58 proteins, we find it recognizes the native conformation for essentially all compact, soluble, globular proteins having known native conformations in comparisons with 10⁴ to 10⁶ reasonable alternative conformations apiece. In this sense, the potential encodes nearly all the essential features of globular protein conformational preference. In addition it “knows” about many additional factors in protein folding, such as the stabilization of multimeric proteins, quaternary structure, the role of disulfide bridges and ligands, proproteins vs. processed proteins, and minimal strand lengths in globular proteins. Comparisons are made with other sorts of protein folding problems, and applications in protein conformational determination and prediction are discussed. © 1994 Wiley-Liss, Inc.     

不同类型氨基酸网络参量与蛋白质折叠的关系

理论和实验研究表明,蛋白质天然拓扑结构对其折叠过程具有重要的影响．采用复杂网络的方法分析蛋白质天然结构的拓扑特征,并探索蛋白质结构特征与折叠速率之间的内在联系．分别构建了蛋白质氨基酸网络、疏水网、亲水网、亲水-疏水网以及相应的长程网络,研究了这些网络的匹配系数(assortativity coefficient)和聚集系数(clustering coefficient)的统计特性．结果表明,除了亲水-疏水网,上述各网络的匹配系数均为正值,并且氨基酸网和疏水网的匹配系数与折叠速率表现出明显的线性正相关,揭示了疏水残基间相互作用的协同性有助于蛋白质的快速折叠．同时,研究发现疏水网的聚集系数与折叠速率有明显的线性负相关关系,这表明疏水残基间三角结构(triangle construction)的形成不利于蛋白质快速折叠．还进一步构建了相应的长程网络,发现序列上间距较远的残基接触对的形成将使蛋白质折叠进程变慢．     

162 Dominant forces in protein folding

In the first part of this talk, I will discuss the need for a paradigm shift from hydrophobic (HφO) to a hydrophilic ((HφI) based theory of protein folding. Next, I will discuss the various types of solvent-induced forces that are exerted on various groups on the protein. It is argued, both theoretically and by simulations, that the HφI–HφI solvent-induced forces are likely to be the strongest. Therefore, it is suggested that these forces are also the forces that force the protein to fold, in a short time, along a narrow range of pathways. This paradigm shift also answers Levinthal’s question about the factors that “speed” and “guide” the folding of proteins.     

Molecular dynamics simulations of a highly charged peptide from an SH3 domain: possible sequence-function relationship

A seven-residue peptide that is highly conserved in SH3 domains despite being far from the active site has been shown by NMR to be stable in solution. This peptide, biologically important because it is a likely folding nucleus for SH3 domains, provides a challenging subject for molecular dynamics because it is highly charged. We present stable, 10-ns simulations of both the native-like diverging turn structure and a helical model. Free energies of these two conformations, estimated through MM-PBSA analysis using several force fields, suggest a comparable free energy (DeltaDeltaG < or =6 kcal/mol) for native and helix conformations. NOE intensities calculated from the native trajectory reproduce experimental data quite well, suggesting that the conformations sampled by the trajectory reasonably represent those observed in the NMR experiment. The molecular dynamics results, as well as sequence analysis of a diverse 690-member family of SH3 domain proteins, suggest that the presence of two elements is essential for formation of the diverging turn structure: a pair of residues with low helical propensity in the turn region and, as previously recognized, two hydrophobic residues to close the end of the diverging turn. Thus, these two sequence features may form the structural basis for the function of this peptide as a folding nucleus in this family of proteins.     

Converging experimental and computational views of the knotting mechanism of a small knotted protein

MJ0366 from Methanocaldococcus jannaschii is the smallest topologically knotted protein known to date. 92 residues in length, MJ0366 ties a trefoil (3₁) knot by threading its C-terminal helix through a buttonhole formed by the remainder of the secondary structure elements. By generating a library of point mutations at positions pertinent to the knot formation, we systematically evaluated the contributions of individual residues to the folding stability and kinetics of MJ0366. The experimental Φ-values were used as restraints to computationally generate an ensemble of conformations that correspond to the transition state of MJ0366, which revealed several nonnative contacts. The importance of these nonnative contacts in stabilizing the transition state of MJ0366 was confirmed by a second round of mutagenesis, which also established the pivotal role of F15 in stapling the network of hydrophobic interactions around the threading C-terminal helix. Our converging experimental and computational results show that, despite the small size, the transition state of MJ0366 is formed at a very late stage of the folding reaction coordinate, following a polarized pathway. Eventually, the formation of extensive native contacts, as well as a number of nonnative ones, leads to the threading of the C-terminal helix that defines the topological knot.     

Monte Carlo studies on equilibrium globular protein folding. II. Beta-barrel globular protein models

In the context of dynamic Monte Carlo simulations on a model protein confined to a tetrahedral lattice, the interplay of protein size and tertiary structure, and the requirements for an all-or-none transition to a unique native state, are investigated. Small model proteins having a primary sequence consisting of a central bend neutral region flanked by two tails having an alternating hydrophobic/hydrophilic pattern of residues are seen to undergo a continuous transition to a beta-hairpin collapsed state. On increasing the length of the tails, the beta-hairpin structural motif is found to be in equilibrium with a four-member beta-barrel. Further increase of the tail length results in the shift of the structural equilibrium to the four-member beta-barrel. The random coil to beta-barrel transition is of an all-or-none character, but while the central turn is always the desired native bend, the location of the turns involving the two external strands is variable. That is, beta-barrels having the external stands that are two residues out of register are also observed in the transition region. Introduction into the primary sequence of two additional regions that are at the very least neutral toward turn formation produces an all-or-none transition to the unique, native, four-member beta-barrel. Various factors that can augment the stability of the native conformation are explored. Overall, these folding simulations strongly indicate that the general rules of globular protein folding are rather robust--namely, one requires a general pattern of hydrophobic/hydrophilic residues that allow the protein to have a well-defined interior and exterior and the presence of regions in the amino acid sequence that at the very least are locally indifferent to turn formation. Since no site-specific interactions between hydrophobic and hydrophilic residues are required to produce a unique four-member beta-barrel, these simulations strongly suggest that site specificity is involved in structural fine-tuning.     

Equilibrium folding and unfolding pathways for a model protein

The folding–unfolding process of reduced bovine pancreatic trypsin inhibitor was investigated with an idealized model employing approximate free energies. The protein is regarded to consist of only C^α and C^β atoms. The backbone dihedral angles are the only conformational variables and are permitted to take discrete values at every 10°. Intraresidue energies consist of two terms: an empirical part taken from the observed frequency distributions of (?,ψ) and an additional favorable energy assigned to the native conformation of each residue. Interresidue interactions are simplified by assuming that there is an attractive energy operative only between residue pairs in close contact in the native structure. A total of 230,000 molecular conformations, with no atomic overlaps, ranging from the native state to the denatured state, are randomly generated by changing the sampling bias. Each conformation is classified according to its conformational energy, F; a conformational entropy, S(F) is estimated for each value of F from the number of samples. The dependence of S(F) on energy reveals that the folding–unfolding transition for this idealized model is an “all-or-none” type; this is attributable to the specific long-range interactions. Interresidue contact probabilities, averaged over samples representing various stages of folding, serve to characterize folding intermediates. Most probable equilibrium pathways for the folding–unfolding transition are constructed by connecting conformationally similar intermediates. The specific details obtained for bovine pancreatic trypsin inhibitor are as follows: (1) Folding begins with the appearance of nativelike medium-range contacts at a β-turn and at the α-helix. (2) These grow to include the native pair of interacting β-strands. This state includes intact regular secondary conformations, as well as the interstrand sheet contacts, and corresponds to an activated state with the highest free energy on the pathway. (3) Additional native long-range contacts are completely formed either toward the amino terminus or toward the carboxyl terminus. (4) In a final step, the missing contacts appear. Although these folding pathways for this model are not consistent with experimental reports, it does indicate multiple folding pathways. The method is general and can be applied to any set of calculated conformational energies and furthermore permits investigation of gross folding features.     

Redesigning the type II' β‐turn in green fluorescent protein to type I': Implications for folding kinetics and stability

Both Type I' and Type II' β‐turns have the same sense of the β‐turn twist that is compatible with the β‐sheet twist. They occur predominantly in two residue β‐hairpins, but the occurrence of Type I' β‐turns is two times higher than Type II' β‐turns. This suggests that Type I' β‐turns may be more stable than Type II' β‐turns, and Type I' β‐turn sequence and structure can be more favorable for protein folding than Type II' β‐turns. Here, we redesigned the native Type II' β‐turn in GFP to Type I' β‐turn, and investigated its effect on protein folding and stability. The Type I' β‐turns were designed based on the statistical analysis of residues in natural Type I' β‐turns. The substitution of the native “GD” sequence of i+1 and i+2 residues with Type I' preferred “(N/D)G” sequence motif increased the folding rate by 50% and slightly improved the thermodynamic stability. Despite the enhancement of in vitro refolding kinetics and stability of the redesigned mutants, they showed poor soluble expression level compared to wild type. To overcome this problem, i and i + 3 residues of the designed Type I' β‐turn were further engineered. The mutation of Thr to Lys at i + 3 could restore the in vivo soluble expression of the Type I' mutant. This study indicates that Type II' β‐turns in natural β‐hairpins can be further optimized by converting the sequence to Type I'. Proteins 2014; 82:2812–2822. © 2014 Wiley Periodicals, Inc.     

High temperature unfolding simulations of the TRPZ1 peptide

We report high temperature molecular dynamics simulations of the unfolding of the TRPZ1 peptide using an explicit model for the solvent. The system has been simulated for a total of 6 μs with 100-ns minimal continuous stretches of trajectory. The populated states along the simulations are identified by monitoring multiple observables, probing both the structure and the flexibility of the conformations. Several unfolding and refolding transition pathways are sampled and analyzed. The unfolding process of the peptide occurs in two steps because of the accumulation of a metastable on-pathway intermediate state stabilized by two native backbone hydrogen bonds assisted by nonnative hydrophobic interactions between the tryptophan side chains. Analysis of the un/folding kinetics and classical commitment probability calculations on the conformations extracted from the transition pathways show that the rate-limiting step for unfolding is the disruption of the ordered native hydrophobic packing (Trp-zip motif) leading from the native to the intermediate state. But, the speed of the folding process is mainly determined by the transition from the completely unfolded state to the intermediate and specifically by the closure of the hairpin loop driven by formation of two native backbone hydrogen bonds and hydrophobic contacts between tryptophan residues. The temperature dependence of the unfolding time provides an estimate of the unfolding activation enthalpy that is in agreement with experiments. The unfolding time extrapolated to room temperature is in agreement with the experimental data as well, thus providing a further validation to the analysis reported here.     

A polar, solvent-exposed residue can be essential for native protein structure

BACKGROUND: A large energy gap between the native state and the non-native folded states is required for folding into a unique three-dimensional structure. The features that define this energy gap are not well understood, but can be addressed using de novo protein design. Previously, alpha(2)D, a dimeric four-helix bundle, was designed and shown to adopt a native-like conformation. The high-resolution solution structure revealed that this protein adopted a bisecting U motif. Glu7, a solvent-exposed residue that adopts many conformations in solution, might be involved in defining the unique three-dimensional structure of alpha(2)D. RESULTS: A variety of hydrophobic and polar residues were substituted for Glu7 and the dynamic and thermodynamic properties of the resulting proteins were characterized by analytical ultracentrifugation, circular dichroism spectroscopy, and nuclear magnetic resonance spectroscopy. The majority of substitutions at this solvent-exposed position had little affect on the ability to fold into a dimeric four-helix bundle. The ability to adopt a unique conformation, however, was profoundly modulated by the residue at this position despite the similar free energies of folding of each variant. CONCLUSIONS: Although Glu7 is not involved directly in stabilizing the native state of alpha(2)D, it is involved indirectly in specifying the observed fold by modulating the energy gap between the native state and the non-native folded states. These results provide experimental support for hypothetical models arising from lattice simulations of protein folding, and underscore the importance of polar interfacial residues in defining the native conformations of proteins.     

Refolding simulations of an isolated fragment of barnase into a native-like β hairpin: Evidence for compactness and hydrogen bonding as concurrent stabilizing factors

Experimental evidence and theoretical models both suggest that protein folding is initiated within specific fragments intermittently adopting conformations close to that found in the protein native structure. These folding initiation sites encompassing short portions of the protein are ideally suited for study in isolation by computational methods aimed at peering into the very early events of folding. We have used Molecular Dynamics (MD) technique to investigate the behavior of an isolated protein fragment formed by residues 85 to 102 of barnase that folds into a β hairpin in the protein native structure. Three independent MD simulations of 1.3 to 1.8 ns starting from unfolded conformations of the peptide portrayed with an all-atom model in water were carried out at gradually decreasing temperature. A detailed analysis of the conformational preferences adopted by this peptide in the course of the simulations is presented. Two of the unfolded peptide conformations fold into a hairpin characterized by native and a larger bulk of nonnative interactions. Both refolding simulations substantiate the close relationship between interstrand compactness and hydrogen bonding network involving backbone atoms. Persistent compactness witnessed by side-chain interactions always occurs concomitantly with the formation of backbone hydrogen bonds. No highly populated conformations generated in a third simulation starting from the remotest unfolded conformer relative to the native structure are observed. However, nonnative long-range and medium-range contacts with the aromatic moiety of Trp94 are spotted, which are in fair agreement with a former nuclear magnetic resonance study of a denaturing solution of an isolated barnase fragment encompassing the β hairpin. All this lends reason to believe that the 85–102 barnase fragment is a strong initiation site for folding. Proteins 29:212–227, 1997. © 1997 Wiley-Liss, Inc.     

Characterization of multiple bends in proteins

The concept of bends or chain reversals [nonhelical dipeptide sequences in which the distance R₃ (i,i+3) between the C^α atoms of residues i and i+3 is ≦ 7.0 Å] has been extended to define double bends as tripeptide sequences, not in an α-helix, in which two successive distances R₃(i,i+3) and R₃ (i+1, i+4) are both ≦7.0 Å, with analogous definitions for higher-order multiple bends. A sample of 23 proteins, consisting of 4050 residues, contains 235 single, 58 double, and 11 higher-order multiple bends. Multiple bends may occur as combinations of the “standard” type I, II, and III chain reversals (as well as their mirror images), but usually they require distortions from these well-defined conformations. The frequency of occurrence of amino acids often differs significantly between single and multiple bends. The probability distribution of R₃ distances does not differ in single and multiple bends. However, R₄ (the distance between the C^α atoms of residues i and i+4) in multiple bends is generally shorter than in tripeptide sequences containing single bends. The value of R₄ in many multiple bends is near those for α-helices. In some other multiple bends, R₄ is even shorter, indicating that these structures are very compact. The signs of the dihedral angles about the virtual bonds connecting C^α atoms and the values of curvature and torsion, as defined by means of differential geometry, indicate that there is a preference for single and multiple bends to be right-handed (like an α-helical sequence, for example) and that there is a strong tendency to conserve the handedness in both single-bend components of many multiple bends. These often have a strong resemblance to distorted single turns of an α-helix and do not constitute chain reversals. Double bends, in which the signs of two successive virtual-bond dihedral angles differ, have conformations that are very different from an α-helix. They act as chain reversals occuring over three residues. These chain reversals have not been described previously. Multiple bends may play an important role in protein folding because they occur fairly frequently in proteins and cause major changes in the direction of the polypeptide chain.     

The folding of an enzyme. VI. The folding pathway of barnase: comparison with theoretical models.

The sequence of events in the refolding pathway of barnase has been analysed to search for general principles in protein folding. There appears to be a correlation between burying hydrophobic surface area and early folding events. All the regions that fold early interact extensively with the beta-sheet. These interactions involve predominantly hydrophobic interactions and the burial of very extensive hydrophobic areas in which multiple, close, hydrophobic-hydrophobic contacts are established around a central group of aliphatic residues. There is no burial of hydrophilic residues in these regions; those that are partly screened from the solvent make hydrogen bonds. All the regions or interactions that are made late in the folding pathway do not make extensive contacts with the beta-sheet. Their buried hydrophobic regions lack a central hydrophobic residue or residues around which other hydrophobic residues pack. Further, in some of these regions there is an extensive burial of hydrophilic residues. The results are consistent with one of the earlier events in protein folding being the local formation of native-like secondary structure elements driven by local hydrophobic surface burial. A possible candidate for an initiation site is a beta-hairpin between beta-strands 3 and 4 that is conserved in the microbial ribonuclease family. A comparison of structures in this family shows that those regions that can be superimposed, or have sequence homology, correspond to elements of structure that are formed and interact with each other early in the folding pathway, suggesting that some of these residues could be involved in directing the folding process. The data on barnase combined with results from other laboratories suggest the following tentative conclusions for the refolding of small monomeric proteins. (1) The refolding pathway is, at least in part, sequential and of compulsory order. (2) Secondary structure formation is driven by local hydrophobic surface burial and precedes the formation of most tertiary interactions. These elements are then stabilized and sometimes elongated by tertiary interactions. It is plausible that there are stop signals encoded in the linear sequence that prevent the elongation of isolated secondary structure elements in solution to a larger extent than is found in the folded protein. (3) Many tertiary interactions are not very constrained in the intermediate but become more and more defined as the hydrophobic cores consolidate, loop structures form and the configuration of surface residues takes place. The interactions between different elements of secondary structure are the last ones to be consolidated while the interactions within the secondary structure elements are consolidated earlier.(ABSTRACT TRUNCATED AT 400 WORDS)