Crystal structure of Boc-Ala-Aib-Ala-Aib-Aib-methyl ester,a pentapeptide fragment of the channel-forming ionophore suzukacillin

t-Buthyoxycarbonyl-L -alanyl-α-aminiosobutyryl-L -alanyl-α-aminoisobutyryl-α-aminoisobutyric acid methyl ester (t-Boc-L -Ala-Aib-L -Ala-Aib-Aib-OMe), C₂₄H₄₃N₅O₈, an end-protected pentapeptide with a sequence corresponding to the 6th through the 10th residues in suzukacillin, crystallizes in the orthorhombic space group P2₁2₁2₁ with a = 11.671, b = 14.534, c = 17.906 Å and z = 4. The molecule exists as a right-handed 3₁₀-helix with a pitch of 6.026 Å. The helix is stabilized by three 4 → 1 hydrogen bonds with the NH groups of Ala(3), Aib(4), and Aib(5) hydrogen bonding to the carbonyl oxygens of t-Boc, Ala(1), and Aib(2), respectively. The helical molecules arrange themselves in a head-to-tail fashion along the a direction in such a way that the NH groups of Ala(1) and Aib(2) hydrogen bond to the carbonyl oxygens of Aib(4) and Aib(5), respectively, of a translationally related molecule. The helical columns thus formed close-pack nearly hexagonally to form the crystal.     

X-Pro peptides: Solution and solid-state conformation of benzyloxycarbonyl-(Aib-Pro)2methyl ester,a type I β-turn

The synthesis of the tetrapeptide benzyloxycarbonyl(α-aminoisobutyryl-L -prolyl)₂-methyl ester (Z-(Aib-Pro)₂-OMe) and an analysis of its conformation in solution and the solid state are reported. Stepwise synthesis using dicyclohexylcarbodiimide leads to racemization at Pro(2). Evidence for the presence of diastereomeric tetrapeptides is obtained from 270-MHz¹H-nmr and 67.89-MHz ¹³C-nmr. The all-L tetrapeptide is obtained by fractional crystallization from ethyl acetate. The NH of Aib(3) is shown to be involved in an intramo-lecular hydrogen bond by variable-temperature ¹H-nmr and the solvent dependence of NH chemical shifts. The results are consistent with a β-turn conformation with Aib(1) and Pro(2) at the corners stabilized by a 4 → 1 hydrogen bond. The molecule crystallizes in the space group P2₁2₁2₁, with a = 8.839, b = 14.938, and c = 22.015 Å. The structure has been refined to an R value of 0.051. The peptide backbone is all-trans, and a 4 → 1 hydrogen bond, between the CO group of the urethane moiety and Aib(3) NH, is observed. Aib(1) and Pro(2) occupy the corner positions of a type I β-turn with ? = ?55.4°, Ψ = ?31.3° for Aib(1) and ? = ?71.6°, Ψ = ?38° for Pro(2). The tertiary amide unit linking Pro(2) and Aib(3) is significantly distorted from planarity (Δω = 14.3°).     

Evidence for stereospecific collision complexes of cyclo(tri-L-prolyl) with benzene

NMR spectra of cyclo(tri-L -prolyl), c-(P)₃, show large shifts of the H_α resonance on adding C₆D₆ to a solution of c-(P)₃ in CD₂Cl₂. CPK models and observed coupling constants indicate a rigid c-(P)₃ conformation, independent of solvent composition, suggesting that these shifts result from formation of stereospecific C₆D₆–c-(P)₃ collision complexes in which the c-(P)₃ H_α lie near the face of the aromatic ring. The temperature dependence of the H_α shifts and the solvent dependent shifts observed on adding toluene-d₈ or nitrobenzene-d₅ to the c-(P)₃ solution suggest that preferred C₆D₆–c-(P)₃ orientations result from attractive interactions between the electron-rich aromatic ring and the electropositive H_α's and/or δ⁺ nitrogen atoms in the peptide backbone. Reports of such interactions in increasingly diverse peptide model systems suggest that they may play a role in stabilizing protein structures.     

High-resolution solid-state 13C-NMR of peptides: a study of chain-length dependence for 3(10)-helix formation

High-resolution solid-state ¹³C-nmr spectra of two series of fully protected oligopeptides, Z-(Aib)_n-OMe (n = 3?8) and Z-(Aib)_n-L-Leu-(Aib)₂-OMe (n = 0?5), were recorded to gain insight into main-chain length dependence for 3₁₀-helix formation. We found that all the oligopeptides examined adopt an incipient or a fully developed 3₁₀-helical structure, as judged from the characteristic splitting of the C_β signals as well as the conformation-dependent displacements of the C_α and C?O peaks.     

Reverse Relationship between α-Carbon Chirality and Helix Handedness in (αMe)Phe Peptides

Abstract

The crystal-state preferred conformations of two tripeptides, one tetrapeptide, and one pen- tapeptide, each containing a single residue of the chiral, C^α,α-disubstituted glycine C^α-methyl, C^α-benzylglycine [(αMe)Phe], have been determined by X-ray diffraction. The tripeptides are Z-L-(αMe)Phe-(Aib)₂-OH dihydrate and Z-Aib-D-(αMe)Phe-Aib-OtBu, the tetrapeptide is Z-(Aib)₂-D-(αMe)Phe-Aib-OtBu, and the pentapeptide is pBrBz-(Aib)₂-DL-(αMe)Phe-(Aib)₂-OtBu. While the two tripeptides are folded in a β-bend conformation, two such conformations are consecutively formed by the tetrapeptide. The pentapeptide adopts a regular 3₁₀-helix promoted by three consecutive β-bends. This study confirms the strong propensity of short peptides containing C^α-methylated α-aminoacids to fold into β-bends and 3₁₀-helical structures. Since Aib is achiral, the handedness of the observed bends and helices is dictated by the presence of the (αMe)Phe residue. In general, we have found that the relationship between (αMe)Phe chirality and helix handedness is opposite to that exhibited by protein aminoacids. A comparison with the preferred conformation of other extensively investigated C^α-methylated aminoacids is made.     

Crystal structure and conformation of a cyclic tetrapeptide cyclo(L-Pro-Sar)2 containing all-cis peptide units

The crystal structure and conformation of the synthetic cyclic tetrapeptide, cyclo(L -Pro-Sar)₂, was determined by x-ray analysis. The peptide crystallizes in the orthorhombic space group P2₁2₁2₁ with cell parameters a = 9.277(1), b = 12.884(1), and c = 15.581(2) Å. The crystal structure was solved by the symbolic addition procedure for direct phase determination and least-squares refinement using 1796 reflections, which led to the final R value of 0.043. This structure provides the first example observed in a crystal of a cyclic tetrapeptide in which all four peptide units have been found in the cis conformation with ω angles deviating slightly by 2°–10° from the ideal value of 0°. It was also found that the two Pro C^α-CO single bonds assumed a trans′ (ψ = 159.6° and 158.4°) conformation. Adjoining average planes of the peptide groups fall at nearly right angles to each other. The pyrrolidine ring conformations of the two prolyl residues are in the envelope form, with C^γ carbon out of the least-squares planes for the remaining four atoms.     

Crystal structures of two cyclic pseudopentapeptides containing ψ[CH2S] and ψ[CH2SO] backbone surrogates

The solid state conformations of cyclo[Gly–Proψ[CH₂S]Gly–D –Phe–Pro] and cyclo[Gly–Proψ[CH₂–(S)–SO]Gly–D –Phe–Pro] have been characterized by X-ray diffraction analysis. Crystals of the sulfide trihydrate are orthorhombic, P2₁2₁2₁, with a = 10.156(3) Å, b = 11.704(3) Å, c = 21.913(4) Å, and Z = 4. Crystals of the sulfoxide are monoclinic, P2₁, with a = 10.662(1) Å, b = 8.552(3) Å, c = 12.947(2) Å, β = 94.28(2), and Z = 2. Unlike their all-amide parent, which adopts an all-trans backbone conformation and a type II β-turn encompassing Gly-Pro-Gly-D -Phe, both of these peptides contain a cis Gly¹-Pro² bond and form a novel turn structure, i.e., a type II′ β-turn consisting of Gly–D –Phe–Pro–Gly. The turn structure in each of these peptides is stabilized by an intramolecular H bond between the carbonyl oxygen of Gly¹ and the amide proton of D -Phe⁴. In the cyclic sulfoxide, the sulfinyl group is not involved in H bonding despite its strong potential as a hydrogen-bond acceptor. The crystal structure made it possible to establish the absolute configuration of the sulfinyl group in this peptide. The two crystal structures also helped identify a type II′ β-turn in the DMSO-d₆ solution conformers of these peptides. © 1993 John Wiley & Sons, Inc.     

Synthesis,properties and structure of hexaaquo-tris(N,N-dimethylformamide)-lanthanide trifluoromethanesulfonates

The compounds of general formula [Ln(DMF)₃- (H₂O)₆](CF₃SO₃)₃ (Ln = LaEu, Tb, Dy) were synthesized and characterized by microanalysis, conductance measurements, IR absorption (Nd³⁺) and emission (Eu³⁺) spectra. The crystal structure of the neodymium compound was determined by X-ray diffraction techniques. The compound crystallizes in the triclinic system, space group P1, a = 8.589(4), b = 11.222(2), c = 12.271(2) Å, α = 56.83(2), β = 62.13(2), γ = 75.14(2)°, V = 875.2 ų, M = 918.4, Z = 1, D_c = 1.73 g cm⁻³, λ(Mo Kα) = 0.71073 Å, μ = 1.65 mm⁻¹, F(000) = 456, R = 0.056, R_w = 0.057, for 2979 independent reflections with I > 3σ(I). Nd³⁺ is coordinated to the oxygen atoms of six independent water molecules at a mean distance NdO = 2.52(1) Å, and to the oxygen atoms of three independent DMF groups at a mean distance NdO = 2.40(2) Å. The coordination polyhedron is a tricapped trigonal prism of point symmetry C_3v.     

Crystallographic characterization of the α,γ C12 helix in hybrid peptide sequences

The solid‐state conformations of two αγ hybrid peptides Boc‐[Aib‐γ⁴(R)Ile]₄‐OMe 1 and Boc‐[Aib‐γ⁴(R)Ile]₅‐OMe 2 are described. Peptides 1 and 2 adopt C₁₂‐helical conformations in crystals. The structure of octapeptide 1 is stabilized by six intramolecular 4 → 1 hydrogen bonds, forming 12 atom C₁₂ motifs. The structure of peptide 2 reveals the formation of eight successive C₁₂ hydrogen‐bonded turns. Average backbone dihedral angles for αγ C₁₂ helices are peptide 1 , Aib; φ (°) = ?57.2 ± 0.8, ψ (°) = ?44.5 ± 4.7; γ⁴(R)Ile; φ (°) = ?127.3 ± 7.3, θ₁ (°) = 58.5 ± 12.1, θ₂ (°) = 67.6 ± 10.1, ψ (°) = ?126.2 ± 16.1; peptide 2 , Aib; φ (°) = ?58.8 ± 5.1, ψ (°) = ?40.3 ± 5.5; ψ⁴(R)Ile; φ (°) = ?123.9 ± 2.7, θ₁ (°) = 53.3 θ 4.9, θ ₂ (°) = 61.2 ± 1.6, ψ (°) = ?121.8 ± 5.1. The tendency of γ⁴‐substituted residues to adopt gauche–gauche conformations about the C^α–C^β and C^β–C^γ bonds facilitates helical folding. The αγ C₁₂ helix is a backbone expanded analog of α peptide 3₁₀ helix. The hydrogen bond parameters for α peptide 3₁₀ and α‐helices are compared with those for αγ hybrid C₁₂ helix. Copyright © 2016 European Peptide Society and John Wiley & Sons.     

Accommodation of a D-Phe residue into a right-handed 310-helix: Structure of Boc-D-Phe-(Aib)4-Gly-L-Leu-(Aib)2-Ome,an analogue of the amino terminal segment of antiamoebins and emerimicins

The crystal structure of the nonapeptide Boc-D -Phe-Aib-Aib-Aib-Aib-Gly-Leu-Aib-AibOMe (I), which is an analogue of the N-terminal sequence of antiamoebins and emerimicins, establishes a completely 3₁₀-helical conformation with seven successive intramolecular 4 → 1 hydrogen bonds. The average, ?, ψ values for residues 1–8 are ?59° and ?32°, respectively. Crystal parameters are C₄₇H₇₇N₉O₁₂, space group P1, a = 10.636(4) Å, b = 11.239(4) Å, c = 12.227(6) Å, α = 101.17(4)°, β = 97.22(4)°, γ = 89.80(3)°, Z = 1, R = 5.95% for 3018 data with |F₀| > 3α(F), resolution 0.93 Å. The use of the torsion angle κ = C(i ? 1)N(i)C^α(i)C^β(i), where κ = 68° for D -Phe and κ = 164° for L -Leu, confirms the opposite configurations of these residues. The ?, ψ values of ?62° and ?32° at D -Phe are unusual, since this region is characteristic of residues with L configurations. Peptide I possesses only two chiral residues of opposing configuration. The observed right-handed 3₁₀-helical structure suggests that helix sense has probably been determined by the stereo-chemical preferences of the Leu residue. © 1993 John Wiley & Sons, Inc.     

Studies on the metal—amide bond. XVII. The crystal and molecular structure of the α-form of aqua[N,N′-bis(2′-pyridinecarboxamido)-1,3-propane] copper(II) dihydrate

α-Aqua[N,N′-bis(2′-pyridinecarboxamido)-1,3-propane]copper(II) dihydrate, C₁₅H₂₀N₄O₅Cu, is monoclinic, space group P2₁/c, with a = 11.719(2), b = 13.092(2), c = 12.663(2) Å, β = 119.56(1)°, Z = 4. The structure was refined to R = 0.026 for 2398 diffractometer data using full-matrix least-squares methods. The copper atom is five-coordinate with the N₄-tetradentate ligand encompassing the base of a distorted square-based pyramid which is appreciably distorted towards a trigonal bipyramid [average Cu-N(amide) 1.950(2), Cu-N(pyridine) 2.043(2) Å, N(amide)-Cu-N(amide) 94.5(1), N(pyridine)-Cu-N(pyridine) 100.2(1)°] and with the copper atom lying 0.27 Å above the N₄ plane towards the apical water molecule [Cu-O 2.236(2) Å]. The central six-membered chelate ring adopts a skewed boat conformation and the enforced strain in the molecule results in non-planar distortions in the pyridine rings with only small distortions in the amide groups. The molecules pack in sheets parallel to (10$\text{1}$) and the hydrogen-bonding network involves the water molecules and the amide oxygen atoms of the ligand.     

Crystal structure of dehydromonopetide, (Z)-N-acetyl-α,β-dehydrophenylalanine methylamide

The crystal structure of (Z)-acetyl-α,β-dehydrophenylalanine methylamide (monoclinic Cc, a = 10.241(1), b = 15.252(1), c = 8.643(1) Å, β = 120.98(1)°, Z = 4) has been solved by x-ray diffraction to an R-factor = 0.148, and compared to that of the homologous L -phenylalanine dervative. Molecules are intermolecularly hydrogen-bonded to four neighboring molecules in a three-dimensional network with alternating layers of interacting amide bonds and orthogonally arranged phenyl rings. The existence of the C^α = C^β double bond results in a phenyl orientation that is forbidden for phenylananine (χ¹ = ?7,8°), and in shorter C^α ? C^β and C^β ? C^γ distances. The geometrical paramenters of the peptide backbone are not drastically modified by α,β-unsaturation. However, the N-C^α-C′ angle is increased by nearly 5°, and the dimensions, and therefore probably the electronic conjugation, of the N-terminal amide group to be affected by the occurrence of the vicinal C^α = C^β double bond.     

Crystal and molecular structure of benzyloxycarbonyl-α-aminoisobutyryl-L-prolyl methylamide: The observation of an X2-Pro3 Type III β-Turn

The crystal and molecular structure of N-benzyloxycarbonyl-α-aminoisobutyryl-L -prolyl methylamide, the amino terminal dipeptide fragment of alamethicin, has been determined using direct methods. The compound crystallizes in the orthorhombic system with the space group P2₁2₁2₁. Cell dimensions are a = 7.705 Å, b = 11.365 Å, and c = 21.904 Å. The structure has been refined using conventional procedures to a final R factor of 0.054. The molecular structure possesses a 4 → 1 intramolecular N-H—O hydrogen bond formed between the CO group of the urethane moiety and the NH group of the methylamide function. The peptide backbone adopts the type III β-turn conformation, with ?₂ = ?51.0°, ψ₂ = ?39.7°, ?₃ = ?65.0°, ψ₃ = ?25.4°. An unusual feature is the occurrence of the proline residue at position 3 of the β-turn. The observed structure supports the view that Aib residues initiate the formation of type III β-turn conformations. The pyrrolidine ring is puckered in C^γ-exo fashion.     

A quantum mechanical study of the intrinsic helix-forming tendency of α-aminoisobutyric acid and dehydroalanine residues

A quantum mechanical study to compare the ability of α-aminoisobutyric acid (Aib), de-hydroalanine (ΔAla), and alanine (Ala) residues to stabilize helical conformations has been performed. To address the study, the oligopeptides X_n (X = Aib, ΔAla and Ala), where n varies from 1 to 6, were computed with the AM1 semiempirical method. The results show that the residues modified at the C^α carbon atom, Aib and ΔAla, are better helical formers than Ala. Thus, a cooperative energy effect was found for both residues, and especially for ΔAla. These terms permit the understanding the different conformational behaviors between Ala and its C^α-modified residues Aib and ΔAla. This trend is important for de novo protein design, where Aib and ΔAla must be considered useful residues in the design of synthetic helical motifs. © 1994 John Wiley & Sons, Inc.     

Structural comparison of (CuICH3CN4·dibenzo-18-crown-6 (I) and (CuICH3CN)x (II) fluorescent copper(I) materials

The single crystal X-ray structures of (CuICH₃CN₄·dibenzo-18-crown-6 (I) and (CuICH₃CN) (II) have been determined at room temperature [(I) C₂₈H₃₆Cu₄I₄N₄o₆, monoclinic space group P2₁/n, a = 10.116(4), b = 18.092(8), c = 22.211(9) Å, β = 98.66(3)°, Z = 4; (II) C₂H₃CuIN, orthorhombic pBN2₁, a = 13.618(8), b =8.742(2), c = 4.298(2), Z = 4]. (I) exists as a distorted cube with copper and iodine at alternate corners, the fourth coordination site copper occupied by an acetonitrile molecule coordinated through nitrogen. The cluster contains no crystallographic symmetry element and CuCu distances average 2.770(5) Å. The dibenzo-18-crown-6 displays only second sphere type interactions with cluster. (II) displays a pleated double chain type structure with distorted rectangles of alternating Cu and I atoms sharing opposite edges in infinite array. Copper displays tetrahedral geometry by coordination to three iodine atoms and a nitrogen bound acetonitrile molecule.     

Crystal and molecular structure of isoleucinomycin,cyclo[-(D-Ile-Lac-Ile-D-Hyi)3-](C60H102N6O18)

The crystal structure of a synthetic analog of valinomycin, cyclo[-(D -Ile-Lac-Ile-D -Hyi)₃-] (C₆₀H₁₀₂N₆O₁₈), has been determined by x-ray diffraction procedures. The crystals are orthorhombic, space group P2₁2₁2₁, with cell parameters a = 11.516, b = 15.705, c = 39.310 Å, and Z = 4. The atomic coordinates for the C, N, O atoms were refined in the anisotropic thermal motion approximation and for the H atoms in the isotropic approximation. Values of standard (R) and weighted (R_w) reliability factors after refinement are 0.073 and 0.056, respectively. The structure is completely asymmetric. The cyclic molecular backbone is stabilized by six intramolecular hydrogen bonds N? H…?O?C, five bonds being of the 4→1 type and one being of the 5→1 type. The side chains are located on the molecular periphery. The conformational state of isoleucinomycin in the crystal is intermediate between the corresponding crystalline states of valinomycin and meso-valinomycin. The observed conformation suggests that complexation could proceed via entry of the ion at the face possessing the L -Lac residues, the less crowded face.     

Crystal structure of cyclo(Pro-Gly)3: Li complex: A model for ion transport by cyclo(Pro-Gly)3

The crystal structure of cyclo(Pro-Gly)₃ (PG3) complex with LiSCN (C₂₂H₃₀N₇O₆SLi) has been solved by x-ray diffraction. The crystals belong to the space group R3 in the hexagonal setting with unit cell parameters of a = 12.581(1), c = 29.705(3) Å, V = 4072.0 ų, Z = 6, M_r = 527.53, D_c = 1.23 g/cm³. The crystal structure was solved by direct methods using the program SHELXS-86 and refined to an R value of 5.3% for 1645 reflections (I > 2σI). There are two conformers in the crystal structure. One conformer has three carbonyls on one side and three on the other side of the peptide plane. The other conformer has all six of the carbonyls on the same side of the peptide plane. Both of these conformers bind independently to a Li ion. Based on the conformers of the Li complex and other reported ion complexes formed by PG3, we propose a model for the transport of ions across the lipid membrane. The features of the model are as follows: (1) PG3 forms a hexameric stack in a lipid bilayer when complexing and transporting metal ions. (2) It undergoes a conformational flipping in order pass the ion along the channel. The energy required for the conformational change involved in the flipping of the PG3 molecule may be provided by the applied potential during ion transport. © 1994 John Wiley & Sons, Inc.     

Crystal structure of [chloro(diethyldithiocarbamato)butyl phenyl]tin(IV)

The crystal structure of the title compound, SnCl(C₆H₅)(C₄H₉)[S₂CN(C₂H₅)₂], was determined and refined to an R factor of 3.2% for 4876 reflections. The molecule contains five-coordinate tin in a distorted trigonal bipyramidal arrangement with the tin atom lying 0.20 Å below the equatorial plane formed by one of the sulphur atoms, S(1), and the donor carbons of the butyl and phenyl groups. The chlorine and the other sulphur atom, S(2), occupy axial sites, making a S(2)SnCl angle of 156.85(1)°. The SnS(2) bond is markedly elongated (2.764(1) Å) compared to the SnCl bond (2.449(1) Å) and the SnS(1) bond (2.454(1) Å). The structure resembles those of analogues such as (C₆H₅)₂Sn(glygly) in having both hydrocarbon ligands located in the equatorial plane. Crystal data: space group P$\text{1}$: a = 8.291(2) Å, b = 14.726(3) Å, c = 9.509(2) Å, α = 96.24(2)°, β = 107.02(3)°, γ = 116.70(2)°, Z = 2, R = 3.2% for 4876 independent reflections.     

Molecular structure of the cis-syn photodimer of d(TpT) (cyanoethyl ester)

The three-dimensional structure was determined by x-ray crystallography for d(T[p](CE)T), a uv photoproduct of the cyanoethyl (CE) derivative of d(TpT), having the cis-syn cyclobutane (CB) geometry and the S-configuration at the chiral phosphorus atom. The crystals of C₂₃H₃₀N₅O₁₂P · 2H₂O belong to the orthorhombic space group P2₁2₁2₁ (Z = 4), with cell dimensions a = 11.596 Å, b = 14.834 Å, and c = 15.946 Å, containing two water molecules per asymmetric unit. The CB ring is puckered with a dihedral angle of 151°. The two pyrimidine bases are rotated by –29° from the position of direct overlap of their corresponding atoms. This represents a major distortion of DNA, since in DNA adjacent thymines are rotated by +36°. The pyrimidine rings are puckered with Cremer–Pople parameters for T[p] and in parentheses [p]T: Q: 0.24 Å (0.31 Å); θ: 123° (120°); ?: 141° (86°). These represent half-chairs designated as ⁶H₁ (T[p]) and ₆H⁵ ([p]T). The CB and pyrimidine ring conformations are interrelated, and we postulate that they execute a coupled interconversion in solution. The T[p] segment has the syn glycosyl conformation, a ²T₃ sugar pucker, and gauche^? conformation at C4′-C5′; the [p]T segment is anti, ³T₄, trans. The C5′-O5′ torsion of the [p]T unit is –124.5°, and the C3′-O3′ torsion of the T[p] unit is –152.9°. Bond angles and bond lengths involving the phosphorus atom are similar to those of other phosphotriesters. The P-O3′ and P-05′ torsion angles are –138.1° and 58.6°, respectively. Several intermolecular (but no intramolecular) hydrogen bonds are found in the crystal.     

Conformational Preferences of Heterochiral Peptides. Crystal Structures of Heterochiral Peptides Boc-(D) Val-(D) Ala-Leu-Ala-OMe and Boc-Val-Ala-Leu-(D) Ala-OMe-Enhanced Stability of β-sheet Through C-H…O Hydrogen Bonds

Abstract

The crystal structures of Boc-(D) Val-(D) Ala-Leu-Ala-OMe (vaLA) and Boc-Val-Ala-Leu-(D) Ala-OMe (VALa) have been determined. vaLA crystallises in space group P2₁2₁2₁ with a = 9.401 (4), b = 17.253 (5), c = 36.276 (9)Å, V = 5884 (3) ų, Z = 8, R = 0.086. VALa crystallises in space group P2₁ with a = 9.683 (9), b = 17.355 (7), c = 18.187 (9) Å, β = 95.84 (8)°, V = 3040(4) ų, Z = 4, R = 0.125. There are two molecules in the asymmetric unit in antiparallel β-sheet arrangement in both the structures. Several of the C^α hydrogens are in hydrogen bonding contact with the carbonyl oxygen in the adjacent strand.

An analysis of the observed conformational feature of D-chiral amino acid residues in oligopeptides, using coordinates of 123 crystal structures selected from the 1998 release of CSD has been carried out. This shows that all the residues except D-isoleucine prefer both extended and α_L conformation though the frequence of occurence may not be equal. In addition to this, D-leucine, valine, proline and phenylalanine have assumed α_R conformations in solid state. D-leucine has a strong preference for helical conformation in linear peptides whereas they prefer an extended conformation in cyclic peptides.