Solid-state NMR studies of the structure and mechanisms of proteins

Magic-angle spinning solid-state NMR experiments are well suited to investigating the structures and mechanisms of important proteins that are inaccessible to X-ray crystallography and solution NMR spectroscopy, including membrane proteins and disease-related protein aggregates. Good progress has been made in the development of methods for the complete structure determination of small (<20 kDa) solid proteins using uniformly 13C, 15N-labeled samples. Studies of selectively labeled proteins focusing on labeled active sites have yielded insights into the mechanisms of enzymes and of membrane proteins involved in energy and signal transduction. Studies of selectively labeled synthetic peptides have yielded structural models for biomedically important systems, including amyloid fibrils and surface-associated peptides involved in biomineralization and cell adhesion. Novel NMR and biochemical methods are being developed to target solid-state NMR experiments within large proteins and whole cells. These approaches are being used to investigate mechanisms of transmembrane signaling by membrane receptors and to characterize binding interactions between antibiotics and bacterial cell walls. Thus, solid-state NMR is proving to be a valuable biophysical tool for probing structure and dynamics in a wide range of biomolecules.     

Rapid assignment of solution 31P NMR spectra of large proteins by solid-state spectroscopy

The application of the (31)P NMR spectroscopy to large proteins or protein complexes in solution is hampered by a relatively low intrinsic sensitivity coupled with large line widths. Therefore, the assignment of the phosphorus signals by two-dimensional NMR methods in solution is often extremely time consuming. In contrast, the quality of solid-state NMR spectra is not dependent on the molecular mass and the solubility of the protein. For the complex of Ras with the GTP-analogue GppCH(2)p we show solid-state (31)P NMR methods to be more sensitive by almost one order of magnitude than liquid-state NMR. Thus, solid-state NMR seems to be the method of choice for obtaining the resonance assignment of the phosphorus signals of protein complexes in solution. Experiments on Ras.GDP complexes show that the microcrystalline sample can be substituted by a precipitate of the sample and that unexpectedly the two structural states observed earlier in solution are present in crystals as well.     

13C CPMAS NMR studies of the elastin-like polypeptide (LGGVG)n

The elucidation of structure-function relationships in insoluble elastin is often approached using elastin-like polypeptides. In this manner, the characterization of the different regions in this extensive biopolymer may be facilitated in a "piece-wise" manner. Our solid-state NMR experiments indicate that (LGGVG)n has structural similarities to elastin and some elastin peptides, providing support for the utility of the mimetic peptides. Furthermore, previous NMR and CD studies indicated that the structure of the elastin-like polypeptide (LGGVG)n in solution is best described as a "conformational ensemble" with a mixture of type I and II beta-turns, in addition to unfolded regions. Our data indicate that the peptide does not adopt a single conformation in the solid state, lending further support to models for elastin that involve significant conformational heterogeneity.     

The structural and topological analysis of membrane-associated polypeptides by oriented solid-state NMR spectroscopy: established concepts and novel developments

Solid-state NMR spectroscopy is a powerful technique for the investigation of membrane-associated peptides and proteins as well as their interactions with lipids, and a variety of conceptually different approaches have been developed for their study. The technique is unique in allowing for the high-resolution investigation of liquid disordered lipid bilayers representing well the characteristics of natural membranes. Whereas magic angle solid-state NMR spectroscopy follows approaches that are related to those developed for solution NMR spectroscopy the use of static uniaxially oriented samples results in angular constraints which also provide information for the detailed analysis of polypeptide structures. This review introduces this latter concept theoretically and provides a number of examples. Furthermore, ongoing developments combining solid-state NMR spectroscopy with information from solution NMR spectroscopy and molecular modelling as well as exploratory studies using dynamic nuclear polarization solid-state NMR will be presented.     

Solution and solid-state structure of N-acetamido-3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosylamine

High resolution 1H NMR and 13C NMR spectroscopic and single crystal X-ray structural analyses of N-acetamido-3,4,6-tri-O-acetyl-2-azido-2-deoxy-alpha-D-galactopyranosylamine (1), a minor product of azidonitration reaction of 3,4,6-tri-O-acetyl galactal, are reported. The solution phase studies of 1 reflect that the compound exists in 4C1 conformation with cis-orientation of the substituents at C-1 and C-2. The solid-state structure of 1 reveals that a molecule of water is entrapped in the solid state of 1 and this water molecule serves to mediate N-H...O and C-H...O interactions.     

Structure of an elastin-mimetic polypeptide by solid-state NMR chemical shift analysis

The conformation of an elastin-mimetic recombinant protein, [(VPGVG)4(VPGKG)]39, is investigated using solid-state NMR spectroscopy. The protein is extensively labeled with 13C and 15N, and two-dimensional 13C-13C and 15N-13C correlation experiments were carried out to resolve and assign the isotropic chemical shifts of the various sites. The Pro 15N, 13Calpha, and 13Cbeta isotropic shifts, and the Gly-3 Calpha isotropic and anisotropic chemical shifts support the predominance of type-II beta-turn structure at the Pro-Gly pair but reject a type-I beta-turn. The Val-1 preceding Pro adopts mostly beta-sheet torsion angles, while the Val-4 chemical shifts are intermediate between those of helix and sheet. The protein exhibits a significant conformational distribution, shown by the broad line widths of the 15N and 13C spectra. The average chemical shifts of the solid protein are similar to the values in solution, suggesting that the low-hydration polypeptide maintains the same conformation as in solution. The ability to measure these conformational restraints by solid-state NMR opens the possibility of determining the detailed structure of this class of fibrous proteins through torsion angles and distances.     

CP-MAS and Solution NMR Studies of Allosteric Communication in CA-assemblies of HIV-1

Solution and solid-state NMR spectroscopy are highly complementary techniques for studying structure and dynamics in very high molecular weight systems. Here we have analysed the dynamics of HIV-1 capsid (CA) assemblies in presence of the cofactors IP6 and ATPγS and the host-factor CPSF6 using a combination of solution state and cross polarisation magic angle spinning (CP-MAS) solid-state NMR. In particular, dynamical effects on ns to µs and µs to ms timescales are observed revealing diverse motions in assembled CA.Using CP-MAS NMR, we exploited the sensitivity of the amide/Cα-Cβ backbone chemical shifts in DARR and NCA spectra to observe the plasticity of the HIV-1 CA tubular assemblies and also map the binding of cofactors and the dynamics of cofactor-CA complexes. In solution, we measured how the addition of host- and co-factors to CA -hexamers perturbed the chemical shifts and relaxation properties of CA-Ile and -Met methyl groups using transverse-relaxation-optimized NMR spectroscopy to exploit the sensitivity of methyl groups as probes in high-molecular weight proteins. These data show how dynamics of the CA protein assembly over a range of spatial and temporal scales play a critical role in CA function. Moreover, we show that binding of IP6, ATPγS and CPSF6 results in local chemical shift as well as dynamic changes for a significant, contiguous portion of CA, highlighting how allosteric pathways communicate ligand interactions between adjacent CA protomers.     

Use of 13C conformation-dependent chemical shifts to elucidate the local structure of a large protein with homologous domains in solution and solid state

In order to clarify the difference between solution NMR and X-ray diffraction analyses concerning the presence of alpha-helical structure in protein A, the 13C conformation-dependent chemical shifts of the 13C-labeled carbonyl carbons for selectively labeled protein A were used. In the 13C CP/MAS NMR spectra, the higher-field shifts of the carbonyl carbons of 13C-labeled Thr and Val residues compared with the random coil chemical shifts both in solution and solid state imply the presence of the third helix in the polypeptide chain, in contrast to the crystal structure of Fc-bound B-domain. Thus, a combination of selective isotope labeling and conformation-dependent chemical shifts will be a good Indicator to monitor the local structure of homologous protein in solution and solid state.     

Membrane Protein Structural Validation by Oriented Sample Solid-State NMR: Diacylglycerol Kinase

The validation of protein structures through functional assays has been the norm for many years. Functional assays perform this validation for water-soluble proteins very well, but they need to be performed in the same environment as that used for the structural analysis. This is difficult for membrane proteins that are often structurally characterized in detergent environments, although functional assays for these proteins are most frequently performed in lipid bilayers. Because the structure of membrane proteins is known to be sensitive to the membrane mimetic environment, such functional assays are appropriate for validating the protein construct, but not the membrane protein structure. Here, we compare oriented sample solid-state NMR spectral data of diacylglycerol kinase previously published with predictions of such data from recent structures of this protein. A solution NMR structure of diacylglycerol kinase has been obtained in detergent micelles and three crystal structures have been obtained in a monoolein cubic phase. All of the structures are trimeric with each monomer having three transmembrane and one amphipathic helices. However, the solution NMR structure shows typical perturbations induced by a micelle environment that is reflected in the predicted solid-state NMR resonances from the structural coordinates. The crystal structures show few such perturbations, especially for the wild-type structure and especially for the monomers that do not have significant crystal contacts. For these monomers the predicted and observed data are nearly identical. The thermostabilized constructs do show more perturbations, especially the A41C mutation that introduces a hydrophilic residue into what would be the middle of the lipid bilayer inducing additional hydrogen bonding between trimers. These results demonstrate a general technique for validating membrane protein structures with minimal data obtained from membrane proteins in liquid crystalline lipid bilayers by oriented sample solid-state NMR.     

Determination of alpha-helix and beta-sheet stability in the solid state: a solid-state NMR investigation of poly(L-alanine)

The relative stability of alpha-helix and beta-sheet secondary structure in the solid state was investigated using poly(L-alanine) (PLA) as a model system. Protein folding and stability has been well studied in solution, but little is known about solid-state environments, such as the core of a folded protein, where peptide packing interactions are the dominant factor in determining structural stability. (13)C cross-polarization with magic angle spinning (CPMAS) NMR spectroscopy was used to determine the backbone conformation of solid powder samples of 15-kDa and 21.4-kDa PLA before and after various sample treatments. Reprecipitation from helix-inducing solvents traps the alpha-helical conformation of PLA, although the method of reprecipitation also affects the conformational distribution. Grinding converts the secondary structure of PLA to a final steady-state mixture of 55% beta-sheet and 45% alpha-helix at room temperature regardless of the initial secondary structure. Grinding PLA at liquid nitrogen temperatures leads to a similar steady-state mixture with 60% beta-sheet and 40% alpha-helix, indicating that mechanical shear force is sufficient to induce secondary structure interconversion. Cooling the sample in liquid nitrogen or subjecting it to high pressure has no effect on secondary structure. Heating the sample without grinding results in equilibration of secondary structure to 50% alpha-helix/50% beta-sheet at 100 degrees C when starting from a mostly alpha-helical state. No change was observed upon heating a beta-sheet sample, perhaps due to kinetic effects and the different heating rate used in the experiments. These results are consistent with beta-sheet approximately 260 J/mol more stable than alpha-helix in solid-state PLA.     

A refinement protocol to determine structure,topology, and depth of insertion of membrane proteins using hybrid solution and solid-state NMR restraints

To fully describe the fold space and ultimately the biological function of membrane proteins, it is necessary to determine the specific interactions of the protein with the membrane. This property of membrane proteins that we refer to as structural topology cannot be resolved using X-ray crystallography or solution NMR alone. In this article, we incorporate into XPLOR-NIH a hybrid objective function for membrane protein structure determination that utilizes solution and solid-state NMR restraints, simultaneously defining structure, topology, and depth of insertion. Distance and angular restraints obtained from solution NMR of membrane proteins solubilized in detergent micelles are combined with backbone orientational restraints (chemical shift anisotropy and dipolar couplings) derived from solid-state NMR in aligned lipid bilayers. In addition, a supplementary knowledge-based potential, E _z (insertion depth potential), is used to ensure the correct positioning of secondary structural elements with respect to a virtual membrane. The hybrid objective function is minimized using a simulated annealing protocol implemented into XPLOR-NIH software for general use. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

High-resolution membrane protein structure by joint calculations with solid-state NMR and X-ray experimental data

X-ray diffraction and nuclear magnetic resonance spectroscopy (NMR) are the staple methods for revealing atomic structures of proteins. Since crystals of biomolecular assemblies and membrane proteins often diffract weakly and such large systems encroach upon the molecular tumbling limit of solution NMR, new methods are essential to extend structures of such systems to high resolution. Here we present a method that incorporates solid-state NMR restraints alongside of X-ray reflections to the conventional model building and refinement steps of structure calculations. Using the 3.7 Å crystal structure of the integral membrane protein complex DsbB-DsbA as a test case yielded a significantly improved backbone precision of 0.92 Å in the transmembrane region, a 58% enhancement from using X-ray reflections alone. Furthermore, addition of solid-state NMR restraints greatly improved the overall quality of the structure by promoting 22% of DsbB transmembrane residues into the most favored regions of Ramachandran space in comparison to the crystal structure. This method is widely applicable to any protein system where X-ray data are available, and is particularly useful for the study of weakly diffracting crystals.     

Structure and dynamics of the influenza A M2 Channel: a comparison of three structures

The M2 protein is an essential component of the Influenza virus’ infectivity cycle. It is a homo-tetrameric bundle forming a pH-gated H⁺ channel. The structure of M2 was solved by three different groups, using different techniques, protein sequences and pH environment. For example, solid-state NMR spectroscopy was used on a protein in lipid bilayers, while X-ray crystallography and solution NMR spectroscopy were applied on a protein in detergent micelles. The resulting structures from the above efforts are rather distinct. Herein, we examine the different structures under uniform conditions such as a lipid bilayer and specified protonation state. We employ extensive molecular dynamics simulations, in several protonation states, representing both closed and open forms of the channel. Exploring the properties of each of these structures has shown that the X-ray structure is more stable than the other structures according to various criteria, although its water conductance and water-wire formation do not correlate to the protonation state of the channel.     

Dynamic membrane interactions of antibacterial and antifungal biomolecules,and amyloid peptides,revealed by solid-state NMR spectroscopy

A variety of biomolecules acting on the cell membrane folds into a biologically active structure in the membrane environment. It is, therefore, important to determine the structures and dynamics of such biomolecules in a membrane environment. While several biophysical techniques are used to obtain low-resolution information, solid-state NMR spectroscopy is one of the most powerful means for determining the structure and dynamics of membrane bound biomolecules such as antibacterial biomolecules and amyloidogenic proteins; unlike X-ray crystallography and solution NMR spectroscopy, applications of solid-state NMR spectroscopy are not limited by non-crystalline, non-soluble nature or molecular size of membrane-associated biomolecules. This review article focuses on the applications of solid-state NMR techniques to study a few selected antibacterial and amyloid peptides. Solid-state NMR studies revealing the membrane inserted bent α-helical structure associated with the hemolytic activity of bee venom melittin and the chemical shift oscillation analysis used to determine the transmembrane structure (with α-helix and 3₁₀-helix in the N- and C-termini, respectively) of antibiotic peptide alamethicin are discussed in detail. Oligomerization of an amyloidogenic islet amyloid polypeptide (IAPP, or also known as amylin) resulting from its aggregation in a membrane environment, molecular interactions of the antifungal natural product amphotericin B with ergosterol in lipid bilayers, and the mechanism of lipid raft formation by sphingomyelin studied using solid state NMR methods are also discussed in this review article. This article is part of a Special Issue entitled "Biophysical Exploration of Dynamical Ordering of Biomolecular Systems" edited by Dr. Koichi Kato.     

Review: model peptides and the physicochemical approach to beta-amyloids

beta-Amyloid peptides are the main protein components of neuritic plaques and may be important in the pathogenesis of Alzheimer's Disease. The determination of the structure of beta-amyloid fibrils poses a challenge because of the limited solubility of beta-amyloid peptides and the noncrystalline nature of fibrils formed from these peptides. In this paper, we describe several physicochemical approaches which have been used to examine fibrils and the fibrillogenesis of peptide models of beta-amyloid. Recent advances in solid state NMR, such as the DRAWS pulse sequence, have made this approach a particularly attractive one for peptides such as beta-amyloid, which are not yet amenable to high-resolution solution phase NMR and crystallography. The application of solid state NMR techniques has yielded information on a model peptide comprising residues 10-35 of human beta-amyloid and indicates that in fibrils, this peptide assumes a parallel beta-strand conformation, with all residues in exact register. In addition, we discuss the use of block copolymers of Abeta peptides and polyethylene glycol as probes for the pathways of fibrillogenesis. These methods can be combined with other new methods, such as high-resolution synchrotron X-ray diffraction and small angle neutron and X-ray scattering, to yield structural data of relevance not only to disease, but to the broader question of protein folding and self-assembly.     

Biophysical approaches to membrane protein structure determination.

Recently, there have been several technical advances in the use of solution and solid-state NMR spectroscopy to determine the structures of membrane proteins. The structures of several isolated transmembrane (TM) helices and pairs of TM helices have been solved by solution NMR methods. Similarly, the complete folds of two TM beta-barrel proteins with molecular weights of 16 and 19 kDa have been determined by solution NMR in detergent micelles. Solution NMR has also provided a first glimpse at the dynamics of an integral membrane protein. Structures of individual TM helices have also been determined by solid-state NMR. A combination of NMR with site-directed spin-label electron paramagnetic resonance or Fourier transform IR spectroscopy allows one to assemble quite detailed protein structures in the membrane.     

NMR of membrane proteins in micelles and bilayers: the FXYD family proteins

Determining the atomic resolution structures of membrane proteins is of particular interest in contemporary structural biology. Helical membrane proteins constitute one-third of the expressed proteins encoded in a genome, many drugs have membrane-bound proteins as their receptors, and mutations in membrane proteins result in human diseases. Although integral membrane proteins provide daunting technical challenges for all methods of protein structure determination, nuclear magnetic resonance (NMR) spectroscopy can be an extremely versatile and powerful method for determining their structures and characterizing their dynamics, in lipid environments that closely mimic the cell membranes. Once milligram amounts of isotopically labeled protein are expressed and purified, micelle samples can be prepared for solution NMR analysis, and lipid bilayer samples can be prepared for solid-state NMR analysis. The two approaches are complementary and can provide detailed structural and dynamic information. This paper describes the steps for membrane protein structure determination using solution and solid-state NMR. The methods for protein expression and purification, sample preparation and NMR experiments are described and illustrated with examples from the FXYD proteins, a family of regulatory subunits of the Na,K-ATPase.     

Probing the nature of the blue-shifted intermediate of photoactive yellow protein in solution by NMR: hydrogen-deuterium exchange data and pH studies

The nature of the pB intermediate of photoactive yellow protein (PYP) from Ectothiorhodospira halophila has been probed by NMR. pH-dependent changes in the NMR spectrum of the dark state of PYP are shown to closely mimic exchange broadening effects observed previously in the NMR spectrum of the pB intermediate in solution. Amide H-D exchange data show that while pB retains a solid protected core, two regions become significantly less protected than the dark state. The amide exchange data help to rationalize why the conformational exchange process affects the N-terminal 28-residue segment of the protein, which is not close to the site of chromophore rearrangement. At very low pH (pH 1.7), the dark state NMR spectrum displays approximately 30 very sharp signals, which are characteristic of a portion of the molecule becoming unfolded. Similarities between the dark state spectra at pH approximately 3.2 and the spectra of pB suggest a model for pB in solution where the protein exists in an equilibrium between a well-ordered state and a state in which a region is unfolded. Such a two-state model accounts for the exchange phenomena observed in the NMR spectra of pB, and the hydrophobic exposure and lability inferred from thermodynamic data. It is likely that in the crystalline environment the ordered form of pB is strongly favored.     

Origin of the regioselectivity in an intramolecular nucleophilic addition to arene chromium tricarbonyl complexes

The source of the regioselectivity in the intramolecular nucleophilic addition of nitrile-stabilized carbanions to arene chromium tricarbonyl complexes was investigated for seven different substitution patterns on the arenes. All of the arenes are 1,4-dioxygenated and the substitution varies in the oxygen substituent and in the substituents of the arene carbons (hydrogen and alkyl). The regioselectivity is correlated with the preferred conformations of the chromium tricarbonyl group which in turn was determined by solution and solid-state ¹³C NMR spectroscopy, ¹H NMR spectroscopy in solution as well as X-ray diffraction. In the four complexes analyzed by X-ray diffraction and the three complexes analyzed by solid-state ¹³C NMR spectroscopy, there was only one complex where it was found that the preferred conformation of the -Cr(CO)₃ is different in solution than it is in the solid-state.