A comparison of wood density between classical Cremonese and modern violins

Classical violins created by Cremonese masters, such as Antonio Stradivari and Giuseppe Guarneri Del Gesu, have become the benchmark to which the sound of all violins are compared in terms of their abilities of expressiveness and projection. By general consensus, no luthier since that time has been able to replicate the sound quality of these classical instruments. The vibration and sound radiation characteristics of a violin are determined by an instrument's geometry and the material properties of the wood. New test methods allow the non-destructive examination of one of the key material properties, the wood density, at the growth ring level of detail. The densities of five classical and eight modern violins were compared, using computed tomography and specially developed image-processing software. No significant differences were found between the median densities of the modern and the antique violins, however the density difference between wood grains of early and late growth was significantly smaller in the classical Cremonese violins compared with modern violins, in both the top (Spruce) and back (Maple) plates (p = 0.028 and 0.008, respectively). The mean density differential (SE) of the top plates of the modern and classical violins was 274 (26.6) and 183 (11.7) gram/liter. For the back plates, the values were 128 (2.6) and 115 (2.0) gram/liter. These differences in density differentials may reflect similar changes in stiffness distributions, which could directly impact vibrational efficacy or indirectly modify sound radiation via altered damping characteristics. Either of these mechanisms may help explain the acoustical differences between the classical and modern violins.     

Mineral Preservatives in the Wood of Stradivari and Guarneri

Following the futile efforts of generations to reach the high standard of excellence achieved by the luthiers in Cremona, Italy, by variations of design and plate tuning, current interest is being focused on differences in material properties. The long-standing question whether the wood of Stradivari and Guarneri were treated with wood preservative materials could be answered only by the examination of wood specimens from the precious antique instruments. In a recent communication (Nature, 2006), we reported about the degradation of the wood polymers in instruments of Stradivari and Guarneri, which could be explained only by chemical manipulations, possibly by preservatives. The aim of the current work was to identify the minerals from the small samples of the maple wood which were available to us from the antique instruments. The ashes of wood from one violin and one cello by Stradivari, two violins by Guarneri, one viola by H. Jay, one violin by Gand-Bernardel were analyzed and compared with a variety of commercial tone woods. The methods of analysis were the following: back-scattered electron imaging, X-ray fluorescence maps for individual elements, wave-length dispersive spectroscopy, energy dispersive X-ray spectroscopy and quantitative microprobe analysis. All four Cremonese instruments showed the unmistakable signs of chemical treatments in the form of chemicals which are not present in natural woods, such as BaSO₄, CaF₂, borate, and ZrSiO₄. In addition to these, there were also changes in the common wood minerals. Statistical evaluation of 12 minerals by discriminant analysis revealed: a. a difference among all four Cremona instruments, b. the difference of the Cremonese instruments from the French and English antiques, and c. only the Cremonese instruments differed from all commercial woods. These findings may provide the answer why all attempts to recreate the Stradivarius from natural wood have failed. There are many obvious implications with regard to how the green tone wood should be treated, which chould lead to changes in the practice of violin-making. This research should inspire others to analyze more antique violins for their chemical contents.     

Imitation,Genetic Lineages,and Time Influenced the Morphological Evolution of the Violin

Violin design has been in flux since the production of the first instruments in 16^th century Italy. Numerous innovations have improved the acoustical properties and playability of violins. Yet, other attributes of the violin affect its performance less, and with fewer constraints, are potentially more sensitive to historical vagaries unrelated to quality. Although the coarse shape of violins is integral to their design, details of the body outline can vary without significantly compromising sound quality. What can violin shapes tell us about their makers and history, including the degree that luthiers have influenced each other and the evolution of complex morphologies over time? Here, I provide an analysis of morphological evolution in the violin family, sampling the body shapes of over 9,000 instruments over 400 years of history. Specific shape attributes, which discriminate instruments produced by different luthiers, strongly correlate with historical time. Linear discriminant analysis reveals luthiers who likely copied the outlines of their instruments from others, which historical accounts corroborate. Clustering of averaged violin shapes places luthiers into four major groups, demonstrating a handful of discrete shapes predominate in most instruments. Violin shapes originating from multi-generational luthier families tend to cluster together, and familial origin is a significant explanatory factor of violin shape. Together, the analysis of four centuries of violin shapes demonstrates not only the influence of history and time leading to the modern violin, but widespread imitation and the transmission of design by human relatedness.     

Dendrochronological analysis of an English chest: Contributing to knowledge about wood supply and chest production in 16th century England

Historic furniture has a great ethnographic and historical value, as styles and designs responded to specific uses, fashion trends and the social status of the buyer or the commissioner. Placing it in an exact chronological and geographical production context increases our knowledge about preferences for materials, designs, and woodworking practices for household commodities. Here we present the results of dendrochronological research carried out on an English chest from a private collection. The chest is of a hybrid construction, with boarded sides and back, and a joined front with four carved linenfold panels. It had been described as made of Baltic oak and dating to the mid-16th century, a crucial transition period for which only a few early chests have been analysed. Our results demonstrate, however, that the wood from the lid, side boards and back originates from the south of England. Heartwood/sapwood border in the left side board has allowed an estimated felling date for the tree of between 1520 and 1552. Terminus post quem dates of the rest of the elements pre-dating this interval indicate that the chest was likely made in the second quarter of the 16th century, as initially described. Three linenfold panels show typical features of Baltic wood, whereas the fourth one has different characteristics and could have been made with English oak, but the lack of access to the tree-ring patterns hampers verifying this hypothesis. Mixture of provenances suggests a production workshop in London, although other town in the south with a major timber market cannot be discarded. The construction features are described, and two distinct marks found in the chest are discussed in the regional context of its production. To allow the compilation and inventory of such marks, the ‘Marks on Wood’ community has been created in Zenodo and is presented here.     

松柏类木化石生长轮的定量研究方法与应用

树木生长轮记录了植物生长期的气候环境信息及其生理响应过程,而这些信息可以通过定量分析生长轮的解剖学特征获得,因此生长轮的定量分析被广泛应用于林学、地理学、古气候学和古生物学等研究领域.我国虽然保存了丰富的木化石,但前人多从系统分类学角度研究木化石,而较少利用木化石生长轮定量分析方法开展古气候环境的研究.本文主要结合松柏...     

北京东灵山森林植物多样性的网络结构特征

一个群落可以看作是由物种相互连接的复杂系统,刻画其网络结构有助于深入揭示系统性质以及结构与功能之间的关系。在生态学中,复杂网络理论已被成功应用于食物网与互利网络的结构研究,但尚未检验其刻画生物多样性格局的能力。采用复杂网络理论研究了北京东灵山森林乔木层、灌木层、草本层植物关联关系的网络结构特征及其差异。结果表明,植物物种的共同出现是非随机的,并表现出一定的小世界模式;乔木层、灌木层、草本层植物共同出现的网络在结构特征上存在明显差异,草本层网络比乔木层和灌木层网络更松散且平均路径更长,灌木层和草本层网络的聚类系数高于乔木层且存在度的幂律分布。皆表明复杂网络理论具备反映不同层植物多样性格局差异的能力。     

Dendrochronological studies of indigenous and creole archeological remains in the Argentinean Pampas (19th and 20th centuries)

The Pampas is a natural flat region that covers 750 000 km² in Brazil, Uruguay and Argentina. The driest part of the Argentinean Pampas is occupied by thorny forests dominated by Fabaceae species, mainly by caldén (Prosopis caldenia Burkart). The caldén's area was affected by large human immigration processes that started in the 18th century up to the last century. Semiarid climate in caldén's area has made water a critical source for the development of biotic communities and human settlements. Native people dug wells, lined by wooden poles, commonly named jagüeles, in order to have access to drinkable groundwater. Such poles, preserved in the subsoil, were submitted to wood anatomical and dendrochronological analysis, and 18 were collected from three archeological sites. Because the poles were undated, they were compared with two master chronologies of P. caldenia that belong to the area. Anatomical studies determined that the poles belonged to P. caldenia and Prosopis flexuosa. Poles of one of the sampling sites had their last tree rings between 1799 and 1838, which coincided with indigenous occupation period. On the contrary, the samples from the other two sites were placed chronologically between 1885 and 1918, which coincided with the first creole and European occupation. These results show the use of native people's traditional building strategies by other cultural groups such as the creole and European settlers since the strategies were useful in the semiarid environments.     

Wood fuel consumption,institutional quality,and forest degradation in sub-Saharan Africa: Evidence from a dynamic panel framework

The objective of this paper is to answer an empirical question regarding whether wood fuel consumption and institutional quality affect forest degradation in sub-Saharan Africa. To accomplish this, a sample of 45 sub-Saharan African countries covering 2005–2013 was employed. Also, the dynamic generalized method of moments (GMM) approach was used to estimate the specified model. The results indicated that wood fuel consumption significantly contributed to forest degradation in the region. On the other hand, control of corruption and government effectiveness were negatively related to forest degradation. This suggests that effective control of corruption and governance can contribute to lowering forest degradation in the region. Forest degradation aided by wood fuel consumption can be lessened by effective control of corruption and governance. Thus, policy makers should (1) provide adequate and affordable (or subsidized) modern fuels to the populace, especially rural dwellers, (2) intensify the fight against corruption, and (3) ensure effective governance.     

Modelling variability of wood density in beech as affected by ring age,radial growth and climate

Although it has been recognized as a key parameter of wood quality and a good source of information on growth, annual wood density has been little studied within diffuse-porous trees such as beech ( Fagus sylvatica Liebl.). In this paper we examine the variability encountered in beech ring density series and analyze the influences of ring age, ring width, climate and between-tree variability on density. Thirty ring sequences were sampled from 55-year- old dominant beech trees growing within the same stand; ring density and width were measured using radiography. Ring density proved to be less variable through time than ring width. The relationship between these two variables was less than observed in ring-porous trees and it showed great variation between trees. The sensitivity of ring width and density to climate was also different; width was strongly linked to soil water deficit whereas density was correlated to temperature and August rainfall. Unlike ring width, wood density showed sensitivity towards climatic characteristics of the late growing season. A large part of annual density variability remains unexplained, even using advanced modelled water balance variables. We hypothesize that a significant part of the tree ring is under internal control. We also demonstrated great inter-tree variability (the tree effect) in ring density, which has an influence on density but not on trees response to climate.     

Community structure of Korean fir (Abies koreana) snag‐dwelling arthropods on Hallasan National Park,Jeju Island,Korea

We executed this research to understand the importance of decaying woods as the diverse arthropods' habitat in Abies koreana forests of Mt. Hallasan, Korea, from 2013 April to 2014 July. We discriminated the Abies koreana forests into one live stage and three decay stages in three blocks (Sungpanak, Yeongsil, Donnaeko) with three replicates and collected arthropods using an emergence trap per tree. We also used the different slope, altitude, decay stage and characteristics of dead wood as statistical variables. As A result, a total of six classes 23 orders 99 families 224 species (69,674 individuals) were collected from 282 emergence traps. We found that there were significant differences in abundance among decay stages and study sites. Our research results would be relevant for developing the ecologically sustainable forest management strategies and we expect these results would be used as the basic data for the forest management plans of Abies koreana.     

Large wood and fluvial processes

1. Large wood forms an important component of woodland river ecosystems. The relationship between large wood and the physical characteristics of river systems varies greatly with changes in the tree species of the marginal woodland, the climatic and hydrological regime, the fluvial geomorphological setting and the river and woodland management context. 2. Research on large wood and fluvial processes over the last 25 years has focussed on three main themes: the effects of wood on flow hydraulics; on the transfer of mineral and organic sediment; and on the geomorphology of river channels. 3. Analogies between wood and mineral sediment transfer processes (supply, mobility and river characteristics that affect retention) are found useful as a framework for synthesising current knowledge on large wood in rivers. 4. An important property of wood is its size when scaled to the size of the river channel. ′Small′ channels are defined as those whose width is less than the majority of wood pieces (e.g. width < median wood piece length). `Medium' channels have widths greater than the size of most wood pieces (e.g. width < upper quartile wood piece length), and `Large' channels are wider than the length of all of the wood pieces delivered to them. 5. A conceptual framework defined here for evaluating the storage and dynamics of wood in rivers ranks the relative importance of hydrological characteristics (flow regime, sediment transport regime), wood characteristics (piece size, buoyancy, morphological complexity) and geomorphological characteristics (channel width, geomorphological style) in `Small', `Medium' and `Large' rivers. 6. Wood pieces are large in comparison with river size in `small' rivers, therefore they tend to remain close to where they are delivered to the river and provide important structures in the stream, controlling rather than responding to the hydrological and sediment transfer characteristics of the river. 7. For `Medium' rivers, the combination of wood length and form becomes critical to the stability of wood within the channel. Wood accumulations form as a result of smaller or more mobile wood pieces accumulating behind key pieces. Wood transport is governed mainly by the flow regime and the buoyancy of the wood. Even quite large wood pieces may require partial burial to give them stability, so enhancing the importance of the sediment transport regime. 8. Wood dynamics in `Large' rivers vary with the geometry of the channel (slope and channel pattern), which controls the delivery, mobility and breakage of wood, and also the characteristics of the riparian zone, from where the greatest volume of wood is introduced. Wood retention depends on the channel pattern and the distribution of flow velocity. A large amount is stored at the channel margins. The greater the contact between the active channel and the forested floodplain and islands, the greater the quantity of wood that is stored.     

Effects of dominance and female presence on secondary sexual characteristics in male tufted capuchin monkeys (Sapajus apella)

Alpha status may lead to physiological changes that enhance secondary sexual characteristics, which may serve as competitive signals to conspecific males, sexual signals to females, or possibly a combination of both. Here, we report measurements of secondary sexual characteristics in captive dominant and subordinate male tufted capuchin monkeys (Sapajus apella) with varying access to females. An adult male (who had previously been subordinate while housed with other males) was paired with an adult female. This male–female pair was introduced into a room that housed three other male–male pairs with stable hierarchy arrangements. We analyzed weight, body measurements, facial photographs, and hair cortisol before, during, and after introducing a female into the room. While there were no differences in weight or measurements between alphas and subordinates without physical access to the female prior to or during the female''s presence, we found that direct access to the female resulted in dramatic changes in facial appearance, body size, and testicular volume in the male who was paired with her. Overall, we found little evidence to suggest that alpha males advertise their status within all‐male groups via sexual secondary characteristics. However, direct physical access to females appears to trigger the development of such characteristics in alpha males. It remains of continued interest to identify the endocrine mechanisms responsible for the development, and possible loss, of secondary sexual characteristics.     

Wood decomposition is more strongly controlled by temperature than by tree species and decomposer diversity in highly species rich subtropical forests

While the number of studies on the role of biodiversity on ecosystem functioning is steadily increasing, a key component of biogeochemical cycling in forests, dead wood decay, has been largely neglected. It remains widely unknown whether and how dead wood decay is affected by diversity loss in forests. We studied the hierarchical effects of tree species diversity on wood decay rates in a subtropical forest landscape in southeast China via its influence on fungal OTU richness and invertebrate diversity using piecewise structural equation models. The experiment was conducted in natural forest plots that span a wide gradient of tree species diversity embedded in a heterogeneous topography. To account for interactions between macro‐invertebrates and fungi, that potentially modify the influence of tree biodiversity and climate on dead wood decay, we compared a macro‐invertebrate exclusion treatment with a control treatment that allowed access to all types of decomposers. Diversity effects of trees on wood decay rates were mostly negative and mediated by the diversity of macro‐invertebrates. However, the effects of tree species diversity or fungal OTU richness and macro‐invertebrate diversity on wood decay rates were comparatively weak. Temperature affected decay rates positively and had the strongest influence in all treatments. While the exclusion of macro‐invertebrates did not lead to a reduction of wood decay rates, our results suggest that they may however have a mediating role in the process. In the presence of invertebrates the predictability of wood decay rates was higher and we observed a tendency of a stronger temperature control. Our results suggest that there is evidence for diversity effects on wood decomposition, but the temperature control is still more important. Thus, an increase in mean annual temperature will increase carbon and nutrient turnover through wood decomposition in subtropical forest irrespective of biotic composition.     

地形与竞争因子对红松胸径与年龄关系的影响

森林年龄结构一直是森林生态学研究的重要内容之一,利用胸径指标间接推测树木年龄是获得森林年龄结构的有效手段。基于黑龙江省小兴安岭林区156株成熟红松解析木数据,分析成熟红松个体胸径与年龄之间关系,探讨地形与竞争因子对红松胸径与年龄关系的影响。研究结果表明:对所搜集的红松解析木数据,海拔、坡度、坡向、竞争因子等因素都对红松胸径与年龄关系产生影响,其中坡向与坡位对红松胸径-年龄关系影响最为明显,而竞争因子的影响较小并且在不同地形条件下表现出差异性。在南坡向-中坡位的红松个体,其胸径与年龄之间表现出了最佳的拟合效果。对地形与竞争因子的影响机理还有待于进一步研究。     

Nest preference of laying hens (Gallus gallus domesticus) and their motivation to exert themselves to gain nest access

In connection with the development of a test method for the attractiveness and appropriateness of nests for laying hens, we carried out an investigation by using a preference test and motivation measuring with the help of push doors. Hens were offered two different nest sites either consisting of a tray filled with wood shavings (litter tray) or a wooden nest box plus wood shavings (nest box). Hens were individually housed in pens (2.0 m × 2.0 m) and had free access to the nest sites until they laid their 15th egg. From that day the hens had to overcome a push door to reach the nest sites. Resistance for entrance was also increased stepwise at the door leading to the hens’ nest. The experiment ended when a hen stopped to lay in her usual nest site for four consecutive days (postexperimental period). The behaviour during the last hour before oviposition was video taped at a level of resistance of 3.5, 6.0, 7.5 and 10.0 N.The hens were categorized into nest and litter layers depending on nest choice. All but one hen pushed maximum resistances between 11.5 and 18.0 N with no differences between nest and litter layers. Behaviour did not significantly change with increasing levels of resistance, but there were significant differences between nest and litter layers. Nest layers spent more time nesting than litter layers while the latter showed a strong tendency to more exploring behaviour. For litter layers, more entries through the push door leading to their nest site and more unsuccessful pushes were detected than for nest layers. According to our results, two types of layers could be distinguished whereas the two were equally motivated to access their nest site.     

Plant fibers: Initiation,growth, model plants,and open questions

Fibers, which are used as a major raw material in the paper industry, as structural components in timber for building, and in the manufacture of wooden items, are among the most important renewable resources. Billions use wood as a major energy source, and fibers are an energy-rich component of wood. They are used for various textiles and as raw material for composites. In this review, I describe the basic characters of fibers, their structure, development, uses, and some of the current major model plants for fiber formation. I discuss open developmental questions and various aspects of further research. Most of the recent progress in the biology of fiber formation, especially in their cell-wall chemistry, emerged from studies of several model plants: Arabidopsis thaliana, Populus sp., Eucalyptus sp., flax, and hemp. I stress the critical need to combine the use of modern methods of research with classical botany. Approaching the issue of fiber formation only by molecular or only by classical methods will not only limit the progress, but may result in critical mistakes. Considering the importance of fibers to humanity, it is surprising how little we know about the biology of fiber formation and how little it is studied as compared, for instance, to the effort to study the genetics and cell biology of flower organ identity.     

Wood trait-environment relationships in a secondary forest succession in South-East China

Concerning forest communities, not much is known about the relationship between wood traits and environmental conditions. Using a succession series, we analyzed which wood anatomical traits were correlated with successional stage and asked which traits and which environmental factors were particularly important for the trait–environment relationship. An extensive dataset of 11 groups of wood traits was generated for 93 woody species that occurred in 27 permanent plots in a secondary subtropical secondary broadleaved forest in Zhejiang Province (SE-China) and subjected to Fourth Corner Analyses, using different permutation models. We encountered a strong relationship of wood porosity, visibility of growth rings and vessel arrangement to the successional gradient. Compared to biotic community characteristics such as density of plants, abiotic environmental variables such as soil characteristics, aspect and inclination of the plots showed only marginal correlations to wood anatomical traits. Furthermore, the link between environment and species composition of the forest communities was found to be more important in explaining the trait–environment relationship than between the communities and species wood traits. In addition, our results support the idea that most of the species in the subtropical forest might be functionally equivalent.     

Sociality influences cultural complexity

Archaeological and ethnohistorical evidence suggests a link between a population''s size and structure, and the diversity or sophistication of its toolkits or technologies. Addressing these patterns, several evolutionary models predict that both the size and social interconnectedness of populations can contribute to the complexity of its cultural repertoire. Some models also predict that a sudden loss of sociality or of population will result in subsequent losses of useful skills/technologies. Here, we test these predictions with two experiments that permit learners to access either one or five models (teachers). Experiment 1 demonstrates that naive participants who could observe five models, integrate this information and generate increasingly effective skills (using an image editing tool) over 10 laboratory generations, whereas those with access to only one model show no improvement. Experiment 2, which began with a generation of trained experts, shows how learners with access to only one model lose skills (in knot-tying) more rapidly than those with access to five models. In the final generation of both experiments, all participants with access to five models demonstrate superior skills to those with access to only one model. These results support theoretical predictions linking sociality to cumulative cultural evolution.     

河南舞阳贾湖遗址出土石器的微痕分析

石器作为人类物质文化的记录者,在史前人类的生产生活中占据着重要地位,对石器功能和使用方式的探讨是考古学关注的问题之一。目前国内石器研究的主要手段是从器物形态出发,进行类型学的研究,针对石器具体功能及使用方式的实证研究较为缺乏,对磨制石器的研究尤为不足。有鉴于此,本研究以中原地区舞阳贾湖遗址出土的磨制石器为研究对象,利用微痕分析和实验考古的方法,对石器的功能、使用方式及加工对象进行分析和判断。结果表明:石镰的主要功能是收割禾本科植物;石刀主要用于加工禾本科植物、木材和兽骨等;石斧的功能主要是加工木材,另外还可能承担加工兽皮和兽骨的工作;石锛的主要功能与木作有关;石凿在形态上有所区别,但其加工对象主要是木材;石铲的功能以掘土为主。微痕分析的结果使我们对贾湖聚落磨制石器的功能有了客观的认识,可以看出石器的功能并不单一,广泛存在着"一器多用"的现象。本研究从石器使用的角度,揭示了史前人类的生产活动和行为特点,同时也为研究先民的生业经济状况提供了重要材料。     

Investigating the Role of Auditory and Tactile Modalities in Violin Quality Evaluation

The role of auditory and tactile modalities involved in violin playing and evaluation was investigated in an experiment employing a blind violin evaluation task under different conditions: i) normal playing conditions, ii) playing with auditory masking, and iii) playing with vibrotactile masking. Under each condition, 20 violinists evaluated five violins according to criteria related to violin playing and sound characteristics and rated their overall quality and relative preference. Results show that both auditory and vibrotactile feedback are important in the violinists’ evaluations but that their relative importance depends on the violinist, the violin and the type of evaluation (different criteria ratings or preference). In this way, the overall quality ratings were found to be accurately predicted by the rating criteria, which also proved to be perceptually relevant to violinists, but were poorly correlated with the preference ratings; this suggests that the two types of ratings (overall quality vs preference) may stem from different decision-making strategies. Furthermore, the experimental design confirmed that violinists agree more on the importance of criteria in their overall evaluation than on their actual ratings for different violins. In particular, greater agreement was found on the importance of criteria related to the sound of the violin. Nevertheless, this study reveals that there are fundamental differences in the way players interpret and evaluate each criterion, which may explain why correlating physical properties with perceptual properties has been challenging so far in the field of musical acoustics.