Radiative decay engineering: biophysical and biomedical applications.

Fluorescence spectroscopy is a widely used research tool in biochemistry and molecular biology. Fluorescence has also become the dominant method enabling the revolution in medical diagnostics, DNA sequencing, and genomics. To date all the fluorescence observables, including spectral shifts, anisotropies, quantum yields, and lifetimes, have all been utilized in basic and applied uses of fluorescence. In this forward-looking article we describe a new opportunity in fluorescence, radiative decay engineering (RDE). By RDE we mean modifying the emission of fluorophores or chromophores by increasing or decreasing their radiative decay rates. In most fluorescence experiments the radiative rates are not changed because these rates depend on the extinction coefficient of the fluorophore. This intrinsic rate is not changed by quenching and is only weakly dependent on environmental effects. Spectral changes are usually caused by changes in the nonradiative rates resulting from quenching or resonance energy transfer. These processes affect the emission by providing additional routes for decay of the excited states without emission. In contrast to the relatively constant radiative rates in free solution, it is known that the radiative rates can be modified by placing the fluorophores at suitable distances from metallic surfaces and particles. This Review summarizes results from the physics literature which demonstrate the effects of metallic surfaces, colloids, or islands on increasing or decreasing emissive rates, increasing the quantum yields of low quantum yield chromophores, decreasing the lifetimes, and directing the typically isotropic emission in specific directions. These effects are not due to reflection of the emitted photons, but rather as the result of the fluorophore dipole interacting with free electrons in the metal. These interactions change the intensity and temporal and spatial distribution of the radiation. We describe the unusual effects expected from increases in the radiative rates with reference to intrinsic and extrinsic biochemical fluorophores. For instance, the decreased lifetime can result in an effective increase in photostability. Proximity to nearby metallic surfaces can also increase the local field and modify the rate of excitation. We predict that the appropriate localization of fluorophores near particles can result in usefully high emission from "nonfluorescent" molecules and million-fold increases in the number of photons observable from each fluorophore. We also describe how RDE can be applied to medical testing and biotechnology. As one example we predict that nearby metal surfaces can be used to increase the low intrinsic quantum yields of nucleic acids and make unlabeled DNA detectable using its intrinsic metal-enhanced fluorescence.     

Radiative decay engineering. 2. Effects of Silver Island films on fluorescence intensity, lifetimes, and resonance energy transfer

Metallic surfaces can have unusual effects on fluorophores such as increasing or decreasing the rates of radiative decay and the rates of resonance energy transfer (RET). In the present article we describe the effects of metallic silver island films on the emission spectra, lifetimes, and energy transfer for several fluorophores. The fluorophores are not covalently coupled to the silver islands so that there are a range of fluorophore-to-metal distances. We show that proximity of fluorophores to the silver islands results in increased fluorescence intensity, with the largest enhancement for the lowest-quantum-yield fluorophores. Importantly, the metal-induced increases in intensity are accompanied by decreased lifetimes and increased photostability. These effects demonstrate that the silver islands have increased the radiative decay rates of the fluorophore. For solvent-sensitive fluorophores the emission spectra shifted to shorted wavelengths in the presence of the silver islands, which is consistent with a decrease of the apparent lifetime for fluorophores near the metal islands. We also observed an increased intensity and blue spectral shift for the protein human glyoxalase, which displays a low quantum yield for its intrinsic tryptophan emission. In this case the blue shift is thought to be due to increased emission from a buried low-quantum-yield tryptophan residue. Increased intensities were also observed for the intrinsic emission of the nucleic acid bases adenine and thymine and for single-stranded 15-mers poly(T) and poly(C). And finally, we observed increased RET for donors and acceptors in solution and when bound to double-helical DNA. These results demonstrate that metallic particles can be used to modify the emission from intrinsic and extrinsic fluorophores in biochemical systems.     

Fluorescence spectral properties of cyanine dye labeled DNA near metallic silver particles

Recent studies have demonstrated that silver metallic particles can increase the quantum yield and decrease the lifetimes of nearby fluorophores. These studies are extended to double stranded DNA oligomers labeled with N,N'-(dipropyl)-tetramethylindocarbocyanine (Cy3) or N,N-(dipropyl)-tetramethylindodicarbocyanine (Cy5). The proximity to silver particles increases the apparent quantum yields and decreases the lifetimes of the double helical DNA 23-mer labeled individually with Cy3 or Cy5. The decreased lifetimes are accompanied by apparently increased photostability of the labeled oligomers near silver particles. Because of spatial averaging across the sample these results are likely to significantly underestimate the effects of silver particles on labeled DNA localized at an optimal distance from the metallic surface. These results suggest that DNA arrays fabricated on substrates with silver particles can display increased sensitivity and photostability in the analysis of gene expression.     

Plasmonic Enhancement of Fluorescence and Raman Scattering by Metal Nanotips

We report modifications to the optical properties of fluorophores in the vicinity of noble metal nanotips. The fluorescence from small clusters of quantum dots has been imaged using an apertureless scanning near-field optical microscope. When a sharp gold tip is brought close to the sample surface, a strong distance-dependent enhancement of the quantum dot fluorescence is observed, leading to a simultaneous increase in optical resolution. These results are consistent with simulations of the electric field and fluorescence enhancement near plasmonic nanostructures. Highly ordered periodic arrays of silver nanotips have been fabricated by nanosphere lithography. Using fluorescence lifetime imaging microscopy, we have created high-resolution spatial maps of the lifetime components of vicinal fluorophores; these show an order of magnitude increase in decay rate from a localized volume around the nanotips, resulting in a commensurate enhancement in the fluorescence emission intensity. Spatial maps of the Raman scattering signal from molecules on the nanotips shows an enhancement of more than five orders of magnitude.     

Metal-enhanced fluorescence of tryptophan residues in proteins: Application toward label-free bioassays

The detection of submonolayers of proteins based on native fluorescence is a potentially valuable approach for label-free detection. We have examined the possibility of using silver nanostructures to increase the emission of tryptophan residues in proteins. Fluorescence spectra, intensities, and lifetimes of multilayers and submonolayers of proteins deposited on the surfaces of silver island films were measured. Increased fluorescence intensities from two- to three-fold and similar decreases in lifetimes were observed in the presence of the silver nanoparticles compared with the proteins on the surface of the bare quartz. The observed spectral effects of silver nanoparticles on tryptophan fluorescence indicates the possibility for the design of analytical tools for the detection of proteins without traditional labeling by extrinsic fluorophores.     

Fluorescence spectral properties of labeled thiolated oligonucleotides bound to silver particles

We examined the fluorescent spectral properties of fluorescein-labeled DNA oligomers when directly bound to metallic silver particles via a terminal sulfhydryl group. We found a 12-fold increase in fluorescence intensity and 25-fold decrease in lifetime for a fluorescein residue positioned 23 nucleotides from the silver surface compared to labeled oligomers in free solution. Similar results were found for a 23-mer labeled with five fluorescein residues. The absence of long lifetime components in the intensity decays suggests that all labeled oligomers are bound to silver and affected similarly by the metallic surfaces. These results provide the basic knowledge needed to begin use of metal-enhanced fluorescence for the detection of target sequences in simple formats potentially without a washing separation step. The use of metal-enhanced fluorescence provides a generic approach to obtaining a hybridization-dependent increase in fluorescence with most, if not all, commonly used fluorophores.     

Luminescence Enhancement of Carboxyl-Coated CdTe Quantum Dots by Silver Nanoparticles

Metallic nanoparticles (NPs) have been used to improve the sensibility of biosensors and bioassays either by enhancing radiative emission or inducing quenching process on fluorescent probes. The aim of this research was to study the interaction of silver and silver-pectin NPs with water-dispersed carboxyl-coated cadmium telluride (CdTe) quantum dots (QDs). Metallic NPs were observed to change the emission of these fluorophores through local field effects. In a solution-base platform, an increase of 82 % was observed for the CdTe emission due to the interaction of QDs and silver-pectin NPs. QDs interaction with silver NPs without pectin was also investigated and a smaller emission enhancement of 20 % was detected. We observed that the NPs’ nature and QDs’ surface charge and concentration are important parameters for NPs-QDs interaction. Moreover, the presence of the pectin polymer shows to be a key component to the observed fluorescence enhancement.     

Radiative decay engineering 5: metal-enhanced fluorescence and plasmon emission

Metallic particles and surfaces display diverse and complex optical properties. Examples include the intense colors of noble metal colloids, surface plasmon resonance absorption by thin metal films, and quenching of excited fluorophores near the metal surfaces. Recently, the interactions of fluorophores with metallic particles and surfaces (metals) have been used to obtain increased fluorescence intensities, to develop assays based on fluorescence quenching by gold colloids, and to obtain directional radiation from fluorophores near thin metal films. For metal-enhanced fluorescence it is difficult to predict whether a particular metal structure, such as a colloid, fractal, or continuous surface, will quench or enhance fluorescence. In the present report we suggest how the effects of metals on fluorescence can be explained using a simple concept, based on radiating plasmons (RPs). The underlying physics may be complex but the concept is simple to understand. According to the RP model, the emission or quenching of a fluorophore near the metal can be predicted from the optical properties of the metal structures as calculated from electrodynamics, Mie theory, and/or Maxwell's equations. For example, according to Mie theory and the size and shape of the particle, the extinction of metal colloids can be due to either absorption or scattering. Incident energy is dissipated by absorption. Far-field radiation is created by scattering. Based on our model small colloids are expected to quench fluorescence because absorption is dominant over scattering. Larger colloids are expected to enhance fluorescence because the scattering component is dominant over absorption. The ability of a metal's surface to absorb or reflect light is due to wavenumber matching requirements at the metal-sample interface. Wavenumber matching considerations can also be used to predict whether fluorophores at a given distance from a continuous planar surface will be emitted or quenched. These considerations suggest that the so called "lossy surface waves" which quench fluorescence are due to induced electron oscillations which cannot radiate to the far-field because wavevector matching is not possible. We suggest that the energy from the fluorophores thought to be lost by lossy surface waves can be recovered as emission by adjustment of the sample to allow wavevector matching. The RP model provides a rational approach for designing fluorophore-metal configurations with the desired emissive properties and a basis for nanophotonic fluorophore technology.     

Effect of concentration quenching on fluorescence recovery after photobleaching measurements.

Standard analysis of fluorescence recovery after photobleaching (FRAP) data is valid only if the quantum yield of unphotobleached fluorophores is independent of concentration, yet close molecular packing in two-dimensional systems may lead to significant fluorescence concentration quenching. Using total internal reflection fluorescence, we quantified the surface concentration dependence of the relative quantum yield of fluorescein isothiocyanate-labeled proteins adsorbed to polymeric surfaces before performing measurements of fluorescence recovery after pattern photobleaching. Adsorbed layers of FITC-labeled ribonuclease A displayed significant concentration quenching, and thus the standard FRAP analysis method was unacceptable. We present an extended FRAP analysis procedure that accounts for the changing quantum yield of diffusing fluorophores in systems that are influenced by concentration quenching. The extended analysis shows that if concentration quenching conditions prevail, there may be significant error in the transport parameters obtained from FRAP measurements by using the standard procedures.     

Radiative decay engineering 6: Fluorescence on one-dimensional photonic crystals

During the past decade the interactions of fluorophores with metallic particles and surfaces has become an active area of research. These near-field interactions of fluorophores with surface plasmons have resulted in increased brightness and directional emission. However, using metals has some disadvantages such as quenching at short fluorophore–metal distances and increased rates of energy dissipation due to lossy metals. These unfavorable effects are not expected in dielectrics. In this article, we describe the interactions of fluorophores with one-dimensional (1D) photonic crystals (PCs), which have alternating layers of dielectrics with dimensions that create a photonic band gap (PBG). Freely propagating light at the PBG wavelength will be reflected. However, similar to metals, we show that fluorophores within near-field distances of the 1DPC interacts with the structure. Our results demonstrate that these fluorophores can interact with both internal modes and Bloch surface waves (BSWs) of the 1DPC. For fluorophores on the surface of the 1DPC, the emission dominantly occurs through the 1DPC and into the substrate. We refer to these two phenomena together as Bragg grating-coupled emission (BGCE). Here we describe our preliminary results on BGCE. 1DPCs are simple to fabricate and can be handled and reused without damage. We believe that BGCE provides opportunities for new formats for fluorescence detection and sensing.     

Monolayers of silver nanoparticles decrease photobleaching: application to muscle myofibrils

Studying single molecules in a cell has the essential advantage that kinetic information is not averaged out. However, since fluorescence is faint, such studies require that the sample be illuminated with the intense light beam. This causes photodamage of labeled proteins and rapid photobleaching of the fluorophores. Here, we show that a substantial reduction of these types of photodamage can be achieved by imaging samples on coverslips coated with monolayers of silver nanoparticles. The mechanism responsible for this effect is the interaction of localized surface plasmon polaritons excited in the metallic nanoparticles with the transition dipoles of fluorophores of a sample. This leads to a significant enhancement of fluorescence and a decrease of fluorescence lifetime of a fluorophore. Enhancement of fluorescence leads to the reduction of photodamage, because the sample can be illuminated with a dim light, and decrease of fluorescence lifetime leads to reduction of photobleaching because the fluorophore spends less time in the excited state, where it is susceptible to oxygen attack. Fluorescence enhancement and reduction of photobleaching on rough metallic surfaces are usually accompanied by a loss of optical resolution due to refraction of light by particles. In the case of monolayers of silver nanoparticles, however, the surface is smooth and glossy. The fluorescence enhancement and the reduction of photobleaching are achieved without sacrificing the optical resolution of a microscope. Skeletal muscle myofibrils were used as an example, because they contain submicron structures conveniently used to define optical resolution. Small nanoparticles (diameter ∼60 nm) did not cause loss of optical resolution, and they enhanced fluorescence ∼500-fold and caused the appearance of a major picosecond component of lifetime decay. As a result, the sample photobleached ∼20-fold more slowly than the sample on glass coverslips.     

Radiative decay engineering 4. Experimental studies of surface plasmon-coupled directional emission

Fluorescence is typically isotropic in space and collected with low efficiency. In this paper we describe surface plasmon-coupled emission (SPCE), which displays unique optical properties and can be collected with an efficiency near 50%. SPCE occurs for fluorophores within about 200 nm of a thin metallic film, in our case a 50-nm-thick silver film on a glass substrate. We show that fluorophore proximity to this film converts the normally isotropic emission into highly directional emission through the glass substrate at a well-defined angle from the normal axis. Depending on the thickness of the polyvinyl alcohol (PVA) film on the silver, the coupling efficiency of sulforhodamine 101 in PVA ranged from 30 to 49%. Directional SPCE was observed whether the fluorophore was excited directly or by the evanescent field due to the surface plasmon resonance. The emission is always polarized perpendicular to the plane of incidence, irrespective of the polarization of the incident light. The lifetimes are not substantially changed, indicating a mechanism somewhat different from that observed previously for the effects of silver particles on fluorophores. Remarkably, the directional emission shows intrinsic spectral resolution because the coupling angles depend on wavelength. The distances over which SPCE occurs, 10 to 200 nm, are useful because a large number of fluorophores can be localized within this volume. The emission of more distant fluorophores does not couple into the glass, allowing background suppression from biological samples. SPCE can be expected to become rapidly useful in a variety of analytical and medical sensing applications.     

Photoacoustic analysis of proteins: volumetric signals and fluorescence quantum yields.

A series of proteins has been examined using time-resolved, pulsed-laser volumetric photoacoustic spectroscopy. Photoacoustic waveforms were collected to measure heat release for calculation of fluorescence quantum yields, and to explore the possibility of photoinduced nonthermal volume changes occurring in these protein samples. The proteins studied were the green fluorescent protein (GFP); intestinal fatty acid binding protein (IFABP), and adipocyte lipid-binding protein (ALBP), each labeled noncovalently with 1-anilinonaphthalene-8-sulfonate (1,8-ANS) and covalently with 6-acryloyl-2-(dimethylamino)naphthalene (acrylodan); and acrylodan-labeled IFABP and ALBP with added oleic acid. Of this group of proteins, only the ALBP labeled with 1,8-ANS showed significant nonthermal volume changes at the beta = 0 temperature (approximately 3.8 degrees C) for the buffer used (10 mM Tris-HCI, pH 7.5) (beta is the thermal cubic volumetric expansion coefficient). For all of the proteins except for acrylodan-labeled IFABP, the fluorescence quantum yields calculated assuming simple energy conservation were anomalously high, i.e., the apparent heat signals were lower than those predicted from independent fluorescence measurements. The consistent anomalies suggest that the low photoacoustic signals may be characteristic of fluorophores buried in proteins, and that photoacoustic signals derive in part from the microenvironment of the absorbing chromophore.     

A comparison of the emission efficiency of four common green fluorescence dyes after internalization into cancer cells

In vivo optical imaging to enhance the detection of cancer during endoscopy or surgery requires a targeted fluorescent probe with high emission efficiency and high signal-to-background ratio. One strategy to accurately detect cancers is to have the fluorophore internalize within the cancer cells permitting nonbound fluorophores to be washed away or absorbed. The choice of fluorophores for this task must be carefully considered. For depth of penetration, near-infrared probes are ordinarily preferred but suffer from relatively low quantum efficiency. Although green fluorescent protein has been widely used to image tumors on internal organs in mice, green fluorescent probes are better suited for imaging the superficial tissues because of the short penetration distance of green light in tissue and the highly efficient production of signal. While the fluorescence properties of green fluorophores are well-known in vitro, less attention has been paid to their fluorescence once they are internalized within cells. In this study, the emission efficiency after cellular internalization of four common green fluorophores conjugated to avidin (Av-fluorescein, Av-Oregon green, Av-BODIPY-FL, and Av-rhodamine green) were compared after each conjugate was incubated with SHIN3 ovarian cancer cells. Using the lectin binding receptor system, the avidin-fluorophore conjugates were endocytosed, and their fluorescence was evaluated with fluorescence microscopy and flow cytometry. While fluorescein demonstrated the highest signal outside the cell, among the four fluorophores, internalized Av-rhodamine green emitted the most light from SHIN3 ovarian cancer cells both in vitro and in vivo. The internalized Av-rhodamine green complex appeared to localize to the endoplasmic vesicles. Thus, among the four common green fluorescent dyes, rhodamine green is the brightest green fluorescence probe after cellular internalization. This information could have implications for the design of tumor-targeted fluorescent probes that rely on cellular internalization for cancer detection.     

Sodium 4‐mercaptophenolate capped CdSe/ZnS quantum dots as a fluorescent probe for pH detection in acidic aqueous media

Development of the fluorescent pH detection method is promising due to the sensitivity, easy operation, and low‐cost, etc. However, traditional organic fluorophores have still some disadvantages such as the tedious preparation and purification as well as low photostability and water solubility, which limits the rapid detection application. Semiconductor quantum dots (QDs) have recently risen to prominence as an alternative for organic fluorophores in fluorescence analysis by virtue of their convenient synthesis and superior optical properties. In this study, we report on sodium 4‐mercaptophenolate functionalized CdSe/ZnS QDs (denoted as ^?OPhS‐QDs), which can serve as a selective “on–off” fluorescence probe for aqueous media pH. ^?OPhS‐QDs exhibit strong fluorescence in near neutral medium. As a Lewis organic base, ^?OPhS‐ moieties on QDs surface easily binds to proton under acidic conditions to yield 4‐mercaptophenol capped QDs (i.e. HOPhS‐QDs), which acts as an efficient hole trapper. As a result, the QDs photoluminescence (PL) is switched off. Under optimal conditions, the present probe exhibits a good linear relationship between fluorescence response and pH values in the pH range 3.0–5.2. Furthermore, the present probe exhibits a high selectivity for proton over other common cations and has been successfully used for pH detection in real water samples.     

Spectral Properties of Single Gold Nanoparticles in Close Proximity to Biological Fluorophores Excited by 2-Photon Excitation

Metallic nanoparticles (NPs) are able to modify the excitation and emission rates (plasmonic enhancement) of fluorescent molecules in their close proximity. In this work, we measured the emission spectra of 20 nm Gold Nanoparticles (AuNPs) fixed on a glass surface submerged in a solution of different fluorophores using a spectral camera and 2-photon excitation. While on the glass surface, we observed the presence in the emission at least 3 components: i) second harmonic signal (SHG), ii) a broad emission from AuNPS and iii) fluorescence arising from fluorophores nearby. When on the glass surface, we found that the 3 spectral components have different relative intensities when the incident direction of linear polarization was changed indicating different physical origins for these components. Then we measured by fluctuation correlation spectroscopy (FCS) the scattering and fluorescence signal of the particles alone and in a solution of 100 nM EGFP using the spectral camera or measuring the scattering and fluorescence from the particles. We observed occasional fluorescence bursts when in the suspension we added fluorescent proteins. The spectrum of these burst was devoid of the SHG and of the broad emission in contrast to the signal collected from the gold nanoparticles on the glass surface. Instead we found that the spectrum during the burst corresponded closely to the spectrum of the fluorescent protein. An additional control was obtained by measuring the cross-correlation between the reflection from the particles and the fluorescence arising from EGFP both excited at 488 nm. We found a very weak cross-correlation between the AuNPs and the fluorescence confirming that the burst originate from a few particles with a fluorescence signal.     

The Effect of Fluorophore Conjugation on Antibody Affinity and the Photophysical Properties of Dyes

Because the degree of labeling (DOL) of cell-bound antibodies, often required in quantitative fluorescence measurements, is largely unknown, we investigated the effect of labeling with two different fluorophores (AlexaFluor546, AlexaFluor647) in a systematic way using antibody stock solutions with different DOLs. Here, we show that the mean DOL of the cell-bound antibody fraction is lower than that of the stock using single molecule fluorescence measurements. The effect is so pronounced that the mean DOL levels off at approximately two fluorophores/IgG for some antibodies. We developed a method for comparing the average DOL of antibody stocks to that of the isolated, cell-bound fraction based on fluorescence anisotropy measurements confirming the aforementioned conclusions. We created a model in which individual antibody species with different DOLs, present in an antibody stock solution, were assumed to have distinct affinities and quantum yields. The model calculations confirmed that a calibration curve constructed from the anisotropy of antibody stocks can be used for determining the DOL of the bound fraction. The fluorescence intensity of the cell-bound antibody fractions and of the antibody stocks exhibited distinctly different dependence on the DOL. The behavior of the two dyes was systematically different in this respect. Fitting of the model to these data revealed that labeling with each dye affects quantum yield and antibody affinity differentially. These measurements also implied that fluorophores in multiply labeled antibodies exhibit self-quenching and lead to decreased antibody affinity, conclusions directly confirmed by steady-state intensity measurements and competitive binding assays. Although the fluorescence lifetime of antibodies labeled with multiple fluorophores decreased, the magnitude of this change was not sufficient to account for self-quenching indicating that both dynamic and static quenching processes occur involving H-aggregate formation. Our results reveal multiple effects of fluorophore conjugation, which must not be overlooked in quantitative cell biological measurements.     

Testing oligothiophene fluorophores under physiological conditions. Preparation and optical characterization of the conjugates of bovine serum albumin with oligothiophene N-hydroxysuccinimidyl esters

Bovine serum albumin (BSA) was reacted with linear and newly synthesized branched oligothiophene N-hydroxysuccinimidyl ester fluorophores (TSEs) in moderately basic carbonate buffer solution. Optically stable BSA-TSE conjugates were obtained with a degree of labeling depending on experimental conditions. Conjugates with high fluorophore to BSA ratios (F/BSA = 8) displayed fluorescence quantum yields in the range of 10-30% in water at pH = 7.2, comparable to the quantum yield (25%) of the BSA-FITC conjugate prepared under the same conditions and with the same degree of labeling.     

Increased resonance energy transfer between fluorophores bound to DNA in proximity to metallic silver particles

We examined the effects of metallic silver particles on resonance energy transfer (RET) between fluorophores covalently bound to DNA. A coumarin donor and a Cy3 acceptor were positioned at opposite ends of a 23-bp double helical DNA oligomer. In the absence of silver particles the extent of RET is near 9%, consistent with a Forster distance R(0) near 50 A and a donor to acceptor distance near 75 A. The transfer efficiency increased when the solution of AMCA-DNA-Cy3 was placed between two quartz plates coated with silver island films to near 64%, as determined by both steady-state and time-resolved measurements. The apparent R(0) in the presence of silver island films increases to about 110 A. These values of the transfer efficiency and R(0) represent weighted averages for donor-acceptor pairs near and distant from the metallic surfaces, so that the values at an optimal distance are likely to be larger. The increased energy transfer is observed only between two sandwiched silvered slides. When we replaced one silvered slide with a quartz plate the effect vanished. Also, the increased energy transfer was not observed for silvered slides separated more than a few micrometers. These results suggest the use of metal-enhanced RET in PCR, hybridization, and other DNA assays, and the possibility of controlling energy transfer by the distance between silver surfaces.     

Kinetic properties of prompt and delayed fluorescence of chlorophyll a with λmax= nm when electron transport is blocked on acceptor side of photosystem II

This work is a theoretical consideration of steady-state kinetics of prompt and delayed fluorescence of chlorophyll a entering into the pigment matrices of photosynthetic units of photosystem II when the electron transport from the primary to secondary acceptor of this system is blocked. It has been shown that in such a system of quantum yields of prompt and delayed fluorescence are complementary. At low intensities of excitation light the quantum yield of delayed fluorescence is several times more than that of prompt fluorescence. With an increase in the light intensity the reverse situation is observed. The literature data given sustain the results obtained. it has also been unambiguously shown what values, when changed, may be responsible for the corresponding changes in prompt and delayed fluorescence yields.