Influence of pH, temperature, and urea molar flowrate on Arthrospira platensis fed-batch cultivation: a kinetic and thermodynamic approach

Arthrospira platensis was cultivated photoautotrophically at 6.0 klux light intensity in 5.0-L open tanks, using a mineral medium containing urea as nitrogen source. Fed-batch experiments were performed at constant flowrate. A central composite factorial design combined to response surface methodology (RSM) was utilized to determine the relationship between the selected response variables (cell concentration after 10 days, X(m), cell productivity, P(X), and nitrogen-to-cell conversion factor, Y(X/N)) and codified values of the independent variables (pH, temperature, T, and urea flowrate, K). By applying the quadratic regression analysis, the equations describing the behaviors of these responses as simultaneous functions of the selected independent variables were determined, and the conditions for X(m) and P(X) optimization were estimated (pH 9.5, T = 29 degrees C, and K = 0.551 mM/day). The experimental data obtained under these conditions (X(m) = 749 mg/L; P(X) = 69.9 mg/L.day) were very close to the estimated ones (X(m) = 721 mg/L; P(X) = 67.1 mg/L.day). Additional cultivations were carried out under the above best conditions of pH control and urea flowrate at variable temperature. Consistently with the results of RSM, the best growth temperature was 29 degrees C. The maximum specific growth rates at different temperatures were used to estimate the thermodynamic parameters of growth (DeltaH* = 59.3 kJ/mol; DeltaS* = -0.147 kJ/mol.K; DeltaG* = 103 kJ/mol) and its thermal inactivation (DeltaH(D) (o) = 72.0 kJ/mol; DeltaS(D) (o) = 0.144 kJ/mol.K; DeltaG(D) (o) = 29.1 kJ/mol).     

Transformation by v-H-ras does not restore proliferation of a set of temperature-sensitive cell-cycle mutants of rat 3Y1 fibroblasts

Three temperature-sensitive cell-cycle mutants of rat 3Y1 fibroblasts (3Y1tsD123, 3Y1tsG125, and 3Y1tsH203, each belonging to distinct complementation groups) were transformed with plasmid DNA carrying Harvey murine sarcoma virus cDNA. The criteria for transformation were increase in saturation cell density, capability to clone in soft agar, and alteration in the cellular morphology. At 39.8 degrees C (restrictive temperature of the parental cell lines), all the transformed sublines of each mutant ceased to proliferate and were arrested reversibly in the G1 phase of the cell cycle like the parental lines. At both 39.8 degrees C and 33.8 degrees C (permissive temperature for the parental lines), all the untransformed parental lines synthesized p21ras at low rate. At 33.8 degrees C, all the transformed sublines synthesized p21ras at much higher rate and expressed the morphological phenotype characteristic to v-H-ras-induced transformation. At 39.8 degrees C, the rate of p21ras synthesis was not changed in the transformed sublines of 3Y1tsD123 and 3Y1tsG125, and the morphology of transformed phenotype also remained intact. In the transformed subline of 3Y1tsH203, the rate of p21ras synthesis was lowered at 39.8 degrees C to that seen in the untransformed parental line, and the transformed phenotype in morphology disappeared. In all of the transformed sublines, the amount of v-H-ras mRNA markedly expressed at both 33.8 degrees C and 39.8 degrees C.(ABSTRACT TRUNCATED AT 250 WORDS)     

Requirement for a functional host cell autolytic enzyme system for lysis of Escherichia coli by bacteriophage phi X174

Escherichia coli VC30 is a temperature-sensitive mutant which is defective in autolysis. Strain VC30 lyses at 30 degrees C when treated with beta-lactam antibiotics or D-cycloserine or when deprived of diaminiopimelic acid. The same treatments inhibit growth of the mutant at 42 degrees C but do not cause lysis. Strain VC30 was used here to investigate the mechanism of host cell lysis induced by bacteriophage phi X 174. Strain VC30 was transformed with plasmid pUH12, which carries the cloned lysis gene (gene E) of phage phi X174 under the control of the lac operator-promoter, and with plasmid pMC7, which encodes the lac repressor to keep the E gene silent. Infection of strain VC30(pUH12)(pMC7) with phage phi X174 culminated in lysis at 30 degrees C. At 42 degrees C, intracellular phage development was normal, but lysis did not occur unless a temperature downshift to 30 degrees C was imposed. Similarly, induction of the cloned phi X174 gene E with isopropyl-beta-D-thiogalactoside resulted in lysis at 30 degrees C but not at 42 degrees C. Temperature downshift of the induced culture to 30 degrees C resulted in lysis even in the presence of chloramphenicol. These results indicate that host cell lysis by phage phi X174 is dependent on a functional cellular autolytic enzyme system.     

Effect of operating parameters on specific production rate of a cloned-gene product and performance of recombinant fermentation process

A two-stage continuous system in combination with a temperature-sensitive expression system were used as model systems to maximize the productivity of a cloned gene and minimize the problem associated with the plasmid instability for a high-expression recombinant. In order to optimize the two-stage fermentation process, the effects of such operational variables as temperature and dilution rate on productivity of cloned gene were studied using the model systems and a recombinant, Escherichia coli K12 DeltaH1 Deltatrp/pPLc23trp A1. When the expression of cloned gene is induced by raising the operating temperature above 38 degrees C, a significant decrease in the colony-forming-units (CFU) of the plasmid-harboring cell was observed, and the decrease was related to the product concentration. In order to describe this phenomenon, a new kinetic parameter related to the metabolic stress (metabolic stress factor) was introduced. It is defined as the ratio of the rate of change of pheno-type from colony-forming to non-colony-forming cells to the product accumulation per unit cell mass. At a fixed temperature of 40 degrees C, the varying dilution rate D in the range of 0.35-0.90 h(-1) did not affect the metabolic stress factor significantly. At a fixed dilution rate of D = 0.35 h(-1), this factor remained practically constant up to 41 degrees C but increased rapidly beyond 41 degrees C. The effects of temperature and dilution rate in the second stage on the specific production rate were also studied while maintaining the apparent specific growth rate (mu(2) (app)) of the second stage constant at or near mu(2) (app) = 0.26 h(-1). Under a constant dilution rate, D(2) = 0.35 h(-1), the maximum specific production rate obtained was about q(p, max) = 38 units TrpA/mg cell/h at 41 degrees C. At a constant temperature, T(2) = 40 degrees C, specific production rate increased with decreasing dilution rate with in the dilution rate range of D(2) = 0.35-0.90 h(-1). Based on the results of our study, the optimal operating conditions found were dilution rate D(2) = 0.35 h(-1) and operating temperature T(2) = 41 degrees C at the apparent specific growth rate of 0.26 h(-1). Under the optimal operating conditions, about threefold increase in productivity was achieved compared to the best batch culture result. In addition, the fermentation period could be extended for more than 100 h.     

Design of temperature-sensitive penicillinase repressors by replacement of Pro in predicted beta-turn structures.

Pro residues in predicted beta-turn structures were substituted with other amino acids to obtain temperature-sensitive penicillinase repressors (PenI). A mutant repressor (P70L; Pro-70 is substituted with Leu) was inactive at 48 degrees C and penP gene expression was derepressed (1,200 U/OD660 [optical density at 660 nm] ), although the mutant was still active at 30 degrees C (27 U). The heat induction ratio (penicillinase activity at 48 degrees C compared with that at 30 degrees C) of the mutant was 98 times higher than that of the wild type (i.e., 44 versus 0.45). This result indicated that the side chain of the Leu residue in P70L destroyed the proper folding of the repressor protein at the elevated temperature, whereas the Pro residue of the wild-type repressor stabilized this predicted beta-turn structure even at 48 degrees C. When the Pro residue was replaced by amino acid residues with smaller side chains (i.e., Gly and Ala), these mutant repressors were less temperature sensitive than P70L. These data suggest that the presence of the Pro residue in the beta-turn structure could be one of the key factors in stabilizing protein structure at elevated temperatures.     

Kinetics of batch single cell protein production from rice polishings with Candida utilis in continuously aerated tank reactors

Single cell protein was produced from the defatted rice polishings by fermentation with Candida utilis in an aerated 14-L fermentor to optimize bioprocess variables. Maximum values of specific growth rate coefficient (mu, h(-1)), cell mass yield (Y(X/S), g/g) and cell mass productivity (g/Lh) were 0.31, 0.65, and 1.24, respectively under optimized conditions of aeration rate (1 v.v(-1) m(-1)), dissolved oxygen (50%), corn steep liquor (5%), temperature (35 degrees C), and substrate concentration (90 g rice polishings/L) in yeast salt medium (pH 6.0). The kinetic parameters for 50-L fermentor under same conditions were 0.33 h(-1), 0.66 g/g, 1.33 g/Lh, 2.25 g/Lh, 1.23 g/Lh, 0.45 g/g substrate and 0.20 g/g cell h for mu, Y(X/S), Q(X), Q(S), Q(CP), Y(TP/S), and q(CP), respectively and were significantly higher than their respective values reported on C. utilis in batch culture studies. This biomass protein contained 23.6%, 32.75%, 11.50%, 12.95%, 10.5%, and 0.275% true protein, crude protein, crude fiber, ash, cellulose and RNA content respectively. This implied that the fermentation process could be up scaled to manufacture animal feed. Gross metabolizable energy content of dried SCP was 29,711 kcal/kg and indicated that the SCP could serve both as energy as well as a protein source. Yeast can replace expensive feed ingredients currently being incorporated in poultry feed and can reduce cost of poultry ration by 0.33 US dollars-0.51 US dollars/100 kg bag and improve the economics of feed production in our country.     

Conformational and thermodynamic characterization of the molten globule state occurring during unfolding of cytochromes-c by weak salt denaturants

The denaturation of bovine and horse cytochromes-c by weak salt denaturants (LiCl and CaCl(2)) was measured at 25 degrees C by observing changes in molar absorbance at 400 nm (Delta epsilon(400)) and circular dichroism (CD) at 222 and 409 nm. Measurements of Delta epsilon(400) and mean residue ellipticity at 409 nm ([theta](409)) gave a biphasic transition for both modes of denaturation of cytochromes-c. It has been observed that the first denaturation phase, N (native) conformation <--> X (intermediate) conformation and the second denaturation phase, X conformation <--> D (denatured) conformation are reversible. Conformational characterization of the X state by the far-UV CD, 8-anilino-1-naphthalene sulfonic acid (ANS) binding, and intrinsic viscosity measurements led us to conclude that the X state is a molten globule state. Analysis of denaturation transition curves for the stability of different states in terms of Gibbs energy change at pH 6.0 and 25 degrees C led us to conclude that the N state is more stable than the X state by 9.55 +/- 0.32 kcal mol(-1), whereas the X state is more stable than the D state by only 1.40 +/- 0.25 kcal mol(-1). We have also studied the effect of temperature on the equilibria, N conformation <--> X conformation and X conformation <--> D conformation in the presence of different denaturant concentrations using two different optical probes, namely, [theta](222) and Delta epsilon(400). These measurements yielded T(m), (midpoint of denaturation) and Delta H(m) (enthalpy change) at T(m) as a function of denaturant concentration. A plot of Delta H(m) versus corresponding T(m) was used to determine the constant-pressure heat capacity change, Delta C(p) (= ( partial differential Delta H(m)/ partial differential T(m))(p)). Values of Delta C(p) for N conformation <--> X conformation and X conformation <--> D conformation is 0.92 +/- 0.02 kcal mol(-1) K(-1) and 0.41 +/- 0.01 kcal mol(-1) K(-1), respectively. These measurements suggested that about 30% of the hydrophobic groups in the molten globule state are not accessible to the water.     

Direct involvement of phosphatidylinositol 4-phosphate in secretion in the yeast Saccharomyces cerevisiae

The SEC14 gene encodes an essential phosphatidylinositol (PtdIns) transfer protein required for formation of Golgi-derived secretory vesicles in yeast. Suppressor mutations that rescue temperature-sensitive sec14 mutants provide an approach for determining the role of Sec14p in secretion. One suppressor, sac1-22, causes accumulation of PtdIns(4)P. SAC1 encodes a phosphatase that can hydrolyze PtdIns(4)P and certain other phosphoinositides. These findings suggest that PtdIns(4)P is limiting in sec14 cells and that elevation of PtdIns(4)P production can suppress the secretory defect. Correspondingly, we found that PtdIns(4)P levels were decreased significantly in sec14-3 mutants shifted to 37 degrees C and that sec14-3 cells could grow at an otherwise nonpermissive temperature (34 degrees C) when carrying a plasmid overexpressing PIK1, encoding one of two essential PtdIns 4-kinases. This effect is specific because overexpression of the other PtdIns 4-kinase gene (STT4) or a PtdIns 3-kinase gene (VPS34) did not rescue sec14-3 cells. To further address Pik1p function in secretion, two different pik1(ts) mutants were examined. Upon shift to restrictive temperature (37 degrees C), the PtdIns(4)P levels dropped by about 60% in both pik1(ts) strains within 1 h. During the same period, cells displayed a reduction (40-50%) in release of a secreted enzyme (invertase). However, similar treatment did not effect maturation of a vacuolar enzyme (carboxypeptidase Y). These findings indicate that, first, PtdIns(4)P limitation is a major contributing factor to the secretory defect in sec14 cells; second, Sec14p function is coupled to the action of Pik1p, and; third, PtdIns(4)P has an important role in the Golgi-to-plasma membrane stage of secretion.     

Isodicentric Y chromosome: cytogenetic,molecular and clinical studies and review of the literature

Dicentrics are among the most common structural abnormalities of the human Y chromosome. Predicting the phenotypic consequences of different duplications and deletions of dicentric Y chromosomes is usually complicated by varying degrees of mosaicism (45,X cell lines), which may, in some cases, remain undetected. Molecular studies in patients with dicentric Y chromosomes have been few, and only two studies have attempted to determine the presence of SRY (the putative testis-determining factor gene). We report an 18-year-old female with short stature, amenorrhea, hirsutism, hypoplastic labia minora, and clitoromegaly who has a 45,X/46,X,idic(Y)(p11.32)/47,X,idic(Y)(p11.32),idic(Y) (p11.32) karyotype. Southern analysis using Y-specific probes (Y97, 2D6, 1F5, pY3.4) and polymerase chain reaction (PCR) analysis using primers for ZFY and SRY were positive for all loci tested, indicating that almost all of the Y chromosome was present. Our findings and an extensive review of the literature emphasize the importance of molecular analyses of abnormal Y chromosomes before any general conclusions can be reached concerning the relative effects of the Y-chromosome abnormality and mosaicism on sexual differentiation.     

Light-scattering studies on supercoil unwinding

It has been shown previously that supercoiled [unk]X174 bacteriophage intracellular DNA (mol.wt. 3.2x10(6)) with superhelix density, sigma=-0.025 (-12 superhelical turns) at 25 degrees C is best represented as a Y shape. In this work two techniques have been used to unwind the supercoil and study the changes in tertiary structure which result from changes in the secondary structure. The molecular weights from all experiments were in the range 3.2x10(6)+/-0.12x10(6). In experiments involving temperature change little change in the Y shape was observed between sigma=-0.027 (-13 superhelical turns, 14.9 degrees C) and sigma=-0.021 (-10 superhelical turns, 53.4 degrees C) as evidenced by the root-mean-square radius and the particle-scattering factor P(theta). However, at sigma=-0.0176 (-8 superhelical turns, 74.5 degrees C) the root-mean-square radius fell to between 60 and 70nm from 90nm indicating a large structural change, as did alterations in the P(theta) function. In experiments with the intercalating dye proflavine from values of bound proflavine of 0-0.06mol of dye/mol equiv. of nucleotide which correspond to values of sigma from -0.025 to -0.0004 (-12 to 0 superhelical turns) a similar transition was found when the superhelix density was changed by the same amount, and the molecule was shown to go through a further structural change as the unwinding of the duplex proceeded. At sigma=-0.018 (-9 superhelical turns) the structure was compatible with a toroid, and at sigma=-0.0004 it was compatible with a circle but at no point in the sequence of structure transitions was the structure compatible with the conventional straight interwound model normally visualized as the shape of supercoiled DNA.     

口蹄疫病毒多基因重组质粒的体外表达及衣壳组装

PCR扩增获得包含口蹄疫病毒P1、2A、3C、3D及部分2B编码区的目的基因片段P12X3C3D,将P12X3C3D经AflⅡ和XbaⅠ双酶切后,定向克隆于真核表达质粒载体pcDNA3.1( );另将PCR扩增获得的P12X3C3D直接与真核表达质粒载体pTARGET^TM连接,进行筛选、鉴定及DNA序列分析,分别获得重组质粒pcDNA3．1／P12X3C3D、pTARGET／P12X3C3D。将重组质粒分别转染BHK-21细胞,通过双抗体夹心ELISA方法和间接免疫荧光标记方法检测细胞中表达的口蹄疫病毒抗原,用磷钨酸负染,以电子显微镜观察转染重组质粒的细胞中组装的口蹄疫病毒空衣壳。结果表明,口蹄疫病毒基因组片段正确克隆到真核表达质粒载体上,重组质粒pcDNA3．1／P12X3C3D、pTARGET／P12X3C3D均可在BHK-21细胞中表达FMDV目的蛋白。其中重组质粒pTARGET／P12X3C3D表达的口蹄疫病毒抗原蛋白,能够在细胞内正确组装成病毒空衣壳。     

Temperature-dependent plasmid integration into and excision from the chromosome of Bacillus stearothermophilus

A transformant of Bacillus stearothermophilus carrying a recombinant plasmid, pLP11 (9.5 MDa), on which the penicillinase gene (penP) and kanamycin resistance gene (kan) were located was subjected to mutagenesis, and a mutant plasmid (9.5 MDa; penP kan), designated pTRA117, was obtained. A transformant of B. stearothermophilus carrying pTRA117 could grow at 63 degrees C in medium containing kanamycin, whereas a transformant carrying pLP11 could not. Although pTRA117 was detected as covalently closed circular (ccc) DNA when it was extracted from transformants cultured at 48 degrees C, it was integrated into the host chromosome when the culture temperature was shifted up to 63 degrees C. If the culture temperature was lowered to 48 degrees C from 63 degrees C, a new plasmid (10.7 MDa; penP kan), designated pTRZ117, could be detected as ccc DNA; the size of this plasmid suggested that it was pTRA117 plus a 1.2 MDa DNA fragment of the host chromosome, and this was confirmed by Southern hybridization. pTRZ90 (7.9 MDa; kan) was constructed from pTRZ117 by the deletion of a 2.8 MDa DNA fragment that contained penP. Fresh transformants of B. stearothermophilus that carried either pTRZ117 or pTRZ90 could grow at 65 degrees C.     

The Yersinia enterocolitica pYV Virulence Plasmid Contains Multiple Intrinsic DNA Bends Which Melt at 37°C

Temperature has a pleiotropic effect on Yersinia enterocolitica gene expression. Temperature-dependent phenotypes include the switching between two type III protein secretion systems, flagellum biosynthesis (相似文献   

平菇漆酶基因在毕赤酵母中的分泌表达及酶学性质研究

采用RTPCR技术克隆到一个平菇(Pleurotusostreatus)漆酶基因的全长cDNA,命名为lccPo1,其序列提交GenBank,登录号为AY450404。将其ORF克隆到毕赤酵母表达载体pHBM906,转化3株毕赤酵母GS115、KM71和SMD1168,该漆酶基因在3种毕赤酵母菌株中均实现了分泌表达。3种摇瓶培养条件①25℃,1.0%(VV)甲醇;②20℃,1.0%(VV)甲醇;③20℃,0.5%(VV)甲醇,进行比较研究后发现适当提高甲醇浓度有利于漆酶在低温条件下表达,而降低培养温度到20℃则可以提高漆酶的产量2～6倍。3株重组毕赤酵母在其最适反应条件下测得三者粗酶液最高漆酶酶活分别为3.19UmL[GS115(pHBM565)]、2.56UmL[KM71(pHBM565)]和2.49UmL[SMD1168(pHBM565)]。对重组酶进行相关的酶学性质分析表明,三者的最适反应pH值约为4.2,最适反应温度约为60℃。重组毕赤酵母GS115(pHBM565)所产酶的热稳定性稍好,在pH稳定性方面三者没有太大差异。     

Cloning and expression of the Clostridium thermosulfurogenes glucose isomerase gene in Escherichia coli and Bacillus subtilis.

The gene that encodes thermostable glucose isomerase in Clostridium thermosulfurogenes was cloned by complementation of glucose isomerase activity in a xylA mutant of Escherichia coli. A new assay method for thermostable glucose isomerase activity on agar plates, using a top agar mixture containing fructose, glucose oxidase, peroxidase, and benzidine, was developed. One positive clone, carrying plasmid pCGI38, was isolated from a cosmid library of C. thermosulfurogenes DNA. The plasmid was further subcloned into a Bacillus cloning vector, pTB523, to generate shuttle plasmid pMLG1, which is able to replicate in both E. coli and Bacillus subtilis. Expression of the thermostable glucose isomerase gene in both species was constitutive, whereas synthesis of the enzyme in C. thermosulfurogenes was inducible by D-xylose. B. subtilis and E. coli produced higher levels of thermostable glucose isomerase (1.54 and 0.46 U/mg of protein, respectively) than did C. thermosulfurogenes (0.29 U/mg of protein). The glucose isomerases synthesized in E. coli and B. subtilis were purified to homogeneity and displayed properties (subunit Mr, 50,000; tetrameric molecular structure; thermostability; metal ion requirement; and apparent temperature and pH optima) identical to those of the native enzyme purified from C. thermosulfurogenes. Simple heat treatment of crude extracts from E. coli and B. subtilis cells carrying the recombinant plasmid at 85 degrees C for 15 min generated 80% pure glucose isomerase. The maximum conversion yield of glucose (35%, wt/wt) to fructose with the thermostable glucose isomerase (10.8 U/g of dry substrate) was 52% at pH 7.0 and 70 degrees C.     

Cloning and expression of the Clostridium thermosulfurogenes glucose isomerase gene in Escherichia coli and Bacillus subtilis

The gene that encodes thermostable glucose isomerase in Clostridium thermosulfurogenes was cloned by complementation of glucose isomerase activity in a xylA mutant of Escherichia coli. A new assay method for thermostable glucose isomerase activity on agar plates, using a top agar mixture containing fructose, glucose oxidase, peroxidase, and benzidine, was developed. One positive clone, carrying plasmid pCGI38, was isolated from a cosmid library of C. thermosulfurogenes DNA. The plasmid was further subcloned into a Bacillus cloning vector, pTB523, to generate shuttle plasmid pMLG1, which is able to replicate in both E. coli and Bacillus subtilis. Expression of the thermostable glucose isomerase gene in both species was constitutive, whereas synthesis of the enzyme in C. thermosulfurogenes was inducible by D-xylose. B. subtilis and E. coli produced higher levels of thermostable glucose isomerase (1.54 and 0.46 U/mg of protein, respectively) than did C. thermosulfurogenes (0.29 U/mg of protein). The glucose isomerases synthesized in E. coli and B. subtilis were purified to homogeneity and displayed properties (subunit Mr, 50,000; tetrameric molecular structure; thermostability; metal ion requirement; and apparent temperature and pH optima) identical to those of the native enzyme purified from C. thermosulfurogenes. Simple heat treatment of crude extracts from E. coli and B. subtilis cells carrying the recombinant plasmid at 85 degrees C for 15 min generated 80% pure glucose isomerase. The maximum conversion yield of glucose (35%, wt/wt) to fructose with the thermostable glucose isomerase (10.8 U/g of dry substrate) was 52% at pH 7.0 and 70 degrees C.     

微水体系中荧光假单胞菌脂肪酶催化合成单甘酯

研究了无溶剂微水体系中荧光假单胞菌脂肪酶 (PFL)催化油脂甘油解合成单甘酯的反应因素以及多温程非均相固液反应对单甘酯产率的影响。以初始体系最低共熔点 (PFL)取代临界温度学说中的油脂初熔点 ,通过考察不同IEP体系的甘油解 ,发现PFL酶促油脂甘油解时存在碳链基质特异性的函数关系 ,即反应物油脂中饱和碳残基的质量百分含量 (C₁₆+C₁₈)与单甘酯产率间符合以下多项式:Y =- 0.0006X³ +0.0592X²-0.8909X+26.753(13%<X<76.5%),式中X为C₁₆+C₁₈,Y为40℃时等温反应条件下的单甘酯产率。IEP为40℃时,最适等温反应条件如下：加水量3%～4.5%,加酶量为500μ/g油酯摩尔比1：2.5-5.0(油酯：甘油)反应温度40℃.实验条件下多步等程序降温反应48h后单甘酯最高产率为81.4%.     

Low-copy-number plasmid-cloning vectors amplifiable by derepression of an inserted foreign promoter

By insertion of a DNA fragment, containing the phage lambda pR promoter and the pM-promoted cI857 allele of the lambda repressor gene, in plasmid R1 upstream of the replication control genes, cloning vectors have been constructed which are present in one copy per chromosome at temperatures below 37 degrees C, and which display uncontrolled replication at 42 degrees C. Derivatives have been made which carry the R1 par region, stabilizing the plasmid at low temperature when grown in the absence of selection pressure. Cells harbouring these plasmids stop growing after 1-2 h incubation at 42 degrees C, and at this time 50% of the total DNA in the cells is plasmid DNA corresponding to more than 1000 plasmid molecules per cell. Concomitant with plasmid amplification at the high temperature, synthesis of plasmid-coded gene products is amplified, and these vectors can therefore be utilized for obtaining greatly enhanced yields of gene products that may be detrimental to the host cell when present in large amounts.     

Extensive degradation of mutant-type D123 protein is responsible for temperature-sensitive proliferation inhibition in 3Y1tsD123 cells

A temperature-sensitive mutant of 3Y1, 3Y1tsD123, reversibly arrested in G1 phase of cell cycle at the restrictive temperature of 39.8 degrees C, shows a single amino acid exchange in the D123 protein. In this study, we found that the D123 protein level in 3Y1tsD123, which was 1/8 of that in 3Y1 compared at the permissive temperature of 33.9 degrees C, lowered to 1/4 after a shift to the restrictive temperature. During inhibition of protein synthesis with cycloheximide, the D123 protein level in 3Y1tsD123 decreased markedly depending on the incubation temperature, compared with that in 3Y1, indicating that the lowered levels of D123 protein in 3Y1tsD123 are due to its degradation. Unexpectedly, 2 stably temperature-resistant clones were isolated after transfection of SV-3Y1tsD123 (SV40-transformed 3Y1tsD123, which shows cell death instead of G1 arrest at the restrictive temperature) with the cDNA of the mutant-type (3Y1tsD123-derived) D123 protein. The D123 protein in both clones degraded extensively at both temperatures, suggesting that the overexpression of the mutant-type D123 protein exceeds its degradation. Both temperature-resistant clones contained higher levels of D123 protein at the restrictive temperature than did SV-3Y1tsD123 at the permissive temperature. We concluded that the lowered D123 protein level at the restrictive temperature induces the temperature-sensitive characteristics of 3Y1tsD123 and SV-3Y1tsD123.