A simple purification procedure for lambda gt bacteriophage DNA with hybridization size screening for isolation of longest length cDNA clones

An improved procedure for isolating lambda DNA and screening lambda gt10 or lambda gt11 libraries is described. Recombinant lambda gt11 bacteriophage particles (150,000) were amplified on three agarose plates (50,000 per plate) with Escherichia coli Y1090 as plating bacteria. After confluent lysis, recombinant bacteriophage was extracted with SM buffer. Bacterial debris was removed by centrifugation. A small aliquot of amplified lambda gt11 bacteriophage was kept to rescreen the bacteriophage, should a large or full-length clone be found to be present, after analysis of the size of the cDNA inserts. The major portion of the bacteriophage particles was purified by treatment with equilibrated DEAE-cellulose, pH 7.5. Purified phage particles were precipitated with polyethylene glycol from the DEAE supernatant and extracted with phenol, phenol-chloroform, and chloroform. Such lambda gt11 DNA was readily digested with EcoRI. Liberated insert cDNA was separated on 1.2% agarose gels, transferred onto a nylon membrane, and hybridized with an alkaline phosphatase cDNA probe in an iterative procedure that allows isolation of the largest cDNA clones present in the library. We have used this procedure to isolate a full-length alkaline phosphatase cDNA. The method is quick, reliable, and less costly than conventional procedures for the isolation of full-length cDNAs.     

Convenient uses of polymerase chain reaction in analyzing recombinant cDNA clones

We have used polymerase chain reaction to accelerate our analysis of recombinant lambda-cDNA clones. We have amplified the inserts of lambda gt10 or lambda gt11 recombinants starting with bacteriophage in cored plaques or isolated DNA. The amplifications made with simple or complex oligonucleotide primers have allowed convenient sizing, subcloning and translation of the phage inserts into protein.     

Detection of large cDNA inserts within crude lambda gt11 lysates: a rapid and sensitive method

A method is presented for the isolation of bacteriophage lambda DNA and the rapid identification of large cDNA inserts within crude phage lysates. The primary screening of a lambda gt11 cDNA library with a 32P-radiolabeled cDNA probe yielded 21 putative positive clones. A phage "spot-blot" analysis was employed to quickly screen these potential recombinants. This eliminated 9 of the 21 clones as the result of false positive signals. The remaining 12 recombinant phage were amplified on agarose-based media, and phage DNA was isolated using a modified plate lysate procedure. The DNA thus obtained from these crude lysates could be easily digested with EcoRI and examined by Southern blot analysis. The resulting blot was hybridized with the same cDNA probe used in the initial screening of the library. Thus, two clones harboring the longest cDNA insert were identified from a mixed phage population and were subsequently plaque purified. The procedure is rapid, sensitive, reproducible, inexpensive and allows the processing of several clones at once without sacrificing the quality or yields of the DNA preparation. Furthermore, the method obviates the need for plaque purifying all the positives obtained from the initial screening of a cDNA library.     

Direct cloning of cDNA inserts from lambda gt11 phage DNA into a plasmid vector by a novel and simple method

Bacteriophage lambda gt11 has been used quite extensively for producing cDNA libraries. The cDNA inserts are usually subcloned into a plasmid vector for large scale production and analysis. However, isolating the recombinant DNA of interest from the phage clones can be a tedious task. Since the E. coli strain Y1088 used for lambda gt11 phage infection carries a pBR322-derived plasmid endogenously, we reasoned that this endogenous plasmid could be used directly for cloning the cDNA phage insert. In this report, we describe a method in which cDNA inserts from lambda gt11 phage were cloned directly into the pBR322 plasmid vector, bypassing the time-consuming procedures of preparing plasmid DNA as a subcloning vector. This method is likely to be extended to the cloning of DNA inserts derived from other phage lambda vectors when bacteria containing endogenous pBR322 are used as host cells.     

Cloning and expression of the 3' portion of the T4 denV gene as a lacZ fusion gene

Polyclonal antibodies have been raised against endonuclease V from the bacteriophage T4. This rabbit serum, from which endemic E. coli antibodies have been removed, reacts with a single protein from T4-infected E. coli with a molecular weight of 16078 dalton. It was confirmed that these antibodies were directed against endonuclease V through the inhibition of the pyrimidine dimer specific nicking activity of endonuclease V in an in vitro nicking assay. A phage lambda gt11 T4 dC DNA library was screened for phage which produced a beta-galactosidase-endonuclease V fusion protein. Immunopositive clones were detected at a frequency of 0.25% of the plaques in the library. Restriction enzyme analyses of the DNA from 45 of these phage showed that all contained a 1.8 kb T4 EcoRI fragment which had been inserted within lambda gt11 in a single orientation. Western analysis of proteins which were produced from an induction of lysogens made from these phage reveals a single fusion protein band with a molecular weight slightly larger than native beta-galactosidase.     

Yeast genomic clones encoding polypeptides immunologically related to an 18 kDa subunit of mitochondrial ATP synthase

A yeast genomic library in the bacteriophage expression vector lambda gt11 was screened with a polyclonal anti-holo-ATPase antiserum resulting in the isolation of 54 immunoreactive clones. Four of these phage clones express in bacteria a polypeptide antigenically related to an 18 kDa subunit (P18) of the yeast mitochondrial ATPase complex. Molecular analysis of the yeast DNA inserts in these phage clones revealed two classes of yeast DNA that share little homology at the nucleotide sequence level and therefore may represent distinct separate genes. The polypeptides potentially encoded by these yeast DNA segments do show scattered short blocks of strong amino acid sequence homology, which may underlie the observed immunochemical relatedness between the proteins expressed in bacteria.     

A role for recombination in the production of "free-loader" lambda bacteriophage particles

Density-labeled crosses were performed with bacteriophage lambda under conditions which diminish DNA duplication. The production of viable phage containing fully conserved parental DNA was found to be dependent upon the action of the genetic recombination systems. The production of phage containing DNA with one newly synthesized chain was less dependent upon recombination. The production of phage with chromosomes both of whose chains were synthesized following infection show little, if any, dependence on recombination. One can speculate that some step in the maturation process of bacteriophage lambda is inseparable from the reduction of lambda DNA to the monomeric rods characteristic of lambda virions.     

A simple and efficient procedure for the isolation of high-quality phage lambda DNA using a DEAE-cellulose column

A simple and rapid procedure for purifying large quantities of bacteriophage lambda particles and DNA is described. The procedure involves DEAE-cellulose column chromatography of the phage particles and elution of the phage particles from the column with a low-ionic-strength buffer. The resulting phage were well separated from RNA, DNA, and proteins derived from Escherichia coli host cells. The lambda DNA was prepared from the purified phage particles by the conventional method of phenol extraction and ethanol precipitation. This procedure did not use nucleases, proteases, detergents, or CsCl density gradient centrifugation. The lambda DNA obtained by this method was equivalent in purity to the material prepared by CsCl density gradient centrifugation and amenable to restriction enzyme digestion, ligation, radiolabeling, and double-stranded DNA sequencing. A detailed protocol is described for obtaining 0.5 to 1.0 mg DNA from a 1-liter liquid lysate in less than 5 h. This procedure is simple, inexpensive, and timesaving, and is particularly suitable for large-scale isolation of lambda DNA.     

A method for efficient gene isolation from phage lambda gt11 libraries: use of antisera to denatured, acetone-precipitated proteins

Experience with cloning pseudorabies virus (PRV) DNA in the lambda gt11 phage vector has shown that there are special requirements for the antisera used in screening the libraries, in addition to the requirement that the antisera recognize proteins on a Western blot. Initial screening of a lambda gt11 library of sheared PRV DNA fragments in Escherichia coli for expression of PRV antigens using PRV hyperimmune antisera was unsuccessful. It was only after screening the library with antisera raised against PRV proteins eluted from sodium dodecyl sulfate (SDS)-polyacrylamide (PA) gels that positive results were obtained. These "gel-slice" antisera (GSA) were equivalent in potency to hyperimmune antisera in standard immunoassays (including ELISA, immunoprecipitation, Western blots, and neutralization of virus), but only the GSA could recognize PRV fusion proteins expressed by recombinant lambda gt11 phage. This difference was seen despite the fact that hyperimmune antisera performed satisfactorily on Western blots of denatured PRV-infected cell extracts. These results show that the efficiency of screening expression libraries in E. coli can be improved if antibodies are raised against denatured proteins.     

Lambda phage shuttle vectors for analysis of mutations in mammalian cells in culture and in transgenic mice

Foreign DNA sequences contained in lambda bacteriophage genomes integrated in mammalian DNA can be efficiently rescued into infectious phage particles by treatment of the mammalian DNA with lambda-packaging extracts prepared in E. coli. This system provides for rapid, non-selective recovery of stably integrated, chromosomal sequences into lambda phage for subsequent analysis in bacterial systems. Since rescue is prior to selection, mutations can be recovered from intact animals made transgenic for the phage-target gene sequences. Such approaches allow study of physiologically relevant aspects of mammalian mutagenesis at the molecular level.     

Cloning of the saliva-interacting protein gene from Streptococcus mutans.

Genomic libraries from Streptococcus mutans OMZ175 were constructed in bacteriophage vectors. DNA fragments 1 to 2 kilobases in length were cloned in expression vector lambda gt11. S. mutans DNA fragments 15 to 20 kilobases in length were inserted in the BamHI site of phage EMBL3. Rabbit antiserum raised against an S. mutans saliva-interacting protein with a molecular weight of 74,000, designated 74K SR, was used to screen the lambda gt11 library. A recombinant phage carrying an S. mutans DNA sequence of 1.45 kilobases, lambda SmAD2, was detected and isolated. This fragment, named SmAD2, was used to construct the recombinant expression plasmid pSAD2-4 which encoded for the expression of a 60,000-molecular-weight protein controlled by the beta-galactosidase promoter from plasmid pUC8. The SmAD2 fragment and polyclonal anti-74K SR antibodies were used to screen the EMBL3 library. A total coincidence between the screening with antibodies and the DNA probe was observed, and two phages, lambda SmAD9 and lambda SmAD10, were isolated. They contained a common S. mutans DNA sequence of about 11.8 kilobases and coded for a protein with a molecular weight of about 195,000, which comigrated with a protein of an S. mutans cell wall extract. The expressed protein was purified, and a very strong relationship with the S. mutans 74K SR protein was found by competitive enzyme-linked immunosorbent assay. Thus, cloning of the 74K SR gene allowed us to demonstrate that the saliva receptor appears to be a part of an S. mutans precursor molecule with a molecular mass of 195,000 daltons.     

Separation of T-even Bacteriophage Deoxyribonucleic Acid from Host Deoxyribonucleic Acid by Hydroxyapatite Chromatography

A simple and rapid method is described for separation of T-even bacteriophage deoxyribonucleic acid (DNA) from host (Escherichia coli) DNA by hydroxyapatite column chromatography with a shallow gradient of phosphate buffer at neutral pH. By this method, bacteriophage T2, T4, and T6 DNA (but not T5, T7, or lambda DNA) could be separated from host E. coli DNA. It was found that glucosylation of the T-even phage DNA is an important factor in separation.     

A new host-vector system allowing selection for foreign DNA inserts in bacteriophage lambda gtWES.

An improved vector (lambda gtWES.T5-622) for EcoRI fragments has been derived from EK2 vector lambda gtWES.lambdaB' by replacing the lambda B fragment with two identical 1.1 Md fragments from the pre-early region of bacteriophage T5. The new vector has two advantages which facilitate elimination of parental-type recombinants in an in vitro recombination experiment. Firstly, the 1.1 Md insert is too small to be re-inserted into lambda gtWES in a single copy. Secondly the 1.1 Md T5 fragment carries T5 gene A3 which prevents growth of phage retaining this fragment when the Excherichia coli host carries plasmid ColIb. Thus, essentially all plaques are due to phage with donor DNA inserts and are free of T5 DNA fragments. The size usually given as the theoretical minimum size for insertion into the lambda gt series of vectors is 0.66 Md. We have shown that this size is an underestimate and that the lower limit is about 1.6 Md. A precise estimate is difficult since there is strong selection, among phage having small inserts, for those which have acquired additional genetic material by duplication of the lambda DNA.     

High-density functional display of proteins on bacteriophage lambda

We designed a bacteriophage lambda system to display peptides and proteins fused at the C terminus of the head protein gpD of phage lambda. DNA encoding the foreign peptide/protein was first inserted at the 3' end of a DNA segment encoding gpD under the control of the lac promoter in a plasmid vector (donor plasmid), which also carried lox P(wt) and lox P(511) recombination sequences. Cre-expressing cells were transformed with this plasmid and subsequently infected with a recipient lambda phage that carried a stuffer DNA segment flanked by lox P(wt) and lox P(511) sites. Recombination occurred in vivo at the lox sites and Amp(r) cointegrates were formed. The cointegrates produced recombinant phage that displayed foreign protein fused at the C terminus of gpD. The system was optimised by cloning DNA encoding different length fragments of HIV-1 p24 (amino acid residues 1-72, 1-156 and 1-231) and the display was compared with that obtained with M13 phage. The display on lambda phage was at least 100-fold higher than on M13 phage for all the fragments with no degradation of displayed products. The high-density display on lambda phage was superior to that on M13 phage and resulted in selective enrichment of epitope-bearing clones from gene-fragment libraries. Single-chain antibodies were displayed in functional form on phage lambda, strongly suggesting that correct disulphide bond formation takes place during display.This lambda phage display system, which avoids direct cloning into lambda DNA and in vitro packaging, achieved cloning efficiencies comparable to those obtained with any plasmid system. The high-density display of foreign proteins on bacteriophage lambda should be extremely useful in studying low-affinity protein-protein interactions more efficiently compared to the M13 phage-based system.     

Use of lambda gt11 and monoclonal antibodies to map the genes for the six major glycoproteins of equine herpesvirus 1.

To localize the genes for the major glycoproteins of equine herpesvirus 1 (EHV-1), a library of the EHV-1 genome was constructed in the lambda gt11 expression vector. Recombinant bacteriophage expressing EHV-1 glycoprotein epitopes as fusion products with beta-galactosidase were detected by immunoscreening with monoclonal antibodies specific for each of six EHV-1 glycoproteins. Seventy-four recombinant lambda gt11 clones reactive with EHV-1 monoclonal antibodies were detected among 4 X 10(5) phage screened. Phage expressing determinants on each of the six EHV-1 glycoproteins were represented in the library. Herpesviral DNA sequences contained in lambda gt11 recombinants expressing epitopes of EHV-1 glycoproteins were used as hybridization probes for mapping insert sequences on the viral genome. Genes for five EHV-1 glycoproteins (gp2, gp10, gp13, gp14, and gp21/22a) mapped to the genome L component; only one EHV-1 glycoprotein (gp17/18) was expressed from the unique S region of the genome where genes of several major glycoproteins of other herpesviruses have been located. Two glycoproteins of EHV-1, gp13 and gp14, mapped to positions colinear with genes of major glycoproteins identified in several other alphaherpesviruses (gC- and gB-like glycoproteins, respectively). The genomic locations of other EHV-1 glycoproteins indicated the existence of major glycoproteins of EHV-1 (gp2, gp10, and gp21/22a) for which no genetic homologs have yet been detected in other herpesviruses. The results confirm the general utility of the lambda gt11 expression system for localizing herpesvirus genes and suggest that the genomic positioning of several high-abundance glycoproteins of EHV-1 may be different from that of the prototype alphaherpesvirus, herpes simplex virus.     

Sequencing of cloned DNA using bacteriophage lambda gt11 templates

A procedure for isolating and directly sequencing recombinant bacteriophage lambda gt11 DNA templates is described. Approximately 250-300 bases of sequence can be obtained directly from the lambda gt11 template, eliminating the need for subcloning prior to dideoxynucleotide sequencing of clones.     

Embryonic stem cell gene targeting using bacteriophage lambda vectors generated by phage-plasmid recombination.

Targeted mutagenesis is an extremely useful experimental approach in molecular medicine, allowing the generation of specialized animals that are mutant for any gene of interest. Currently the rate determining step in any gene targeting experiment is construction of the targeting vector (TV). In order to streamline gene targeting methods and avoid problems encountered with plasmid TVs, we describe the direct application of lambda phage in targeted mutagenesis. The recombination-proficient phage vector lambda2TK permits generation of TVs by conventional restriction-ligation or recombination-mediated methods. The resulting lambdaTV DNA can then be cleaved with restriction endonucleases to release the bacteriophage arms and can subsequently be electroporated directly into ES cells to yield gene targets. We demonstrate that in vivo phage-plasmid recombination can be used to introduce neo and lacZ - neo mutations into precise positions within a lambda2TK subclone via double crossover recombination. We describe two methods for eliminating single crossover recombinants, spi selection and size restriction, both of which result in phage TVs bearing double crossover insertions. Thus TVs can be easily and quickly generated in bacteriophage without plasmid subcloning and with little genomic sequence or restriction site information.     

ClpP/ClpX-mediated degradation of the bacteriophage λ O protein and regulation of λ phage and λ plasmid replication

The O protein is a replication initiator that binds to the orilambda region and promotes assembly of the bacteriophage lambda replication complex. This protein, although protected from proteases by other elements of the replication complex, in a free form is rapidly degraded in the host, Escherichia coli, by the ClpP/ClpX protease. Nevertheless, the physiological role of this rapid degradation remains unclear. Here we demonstrate that the copy number of plasmids derived from bacteriophage lambda is significantly higher in wild-type cells growing in rich media than in slowly growing bacteria. However, lambda plasmid copy number in bacteria devoid of the ClpP/ClpX protease was not dependent on the bacterial growth rate and in all minimal media tested was comparable to that observed in wildtype cells growing in a rich medium. Contrary to lambda plasmid replication, the efficiency of lytic growth of bacteriophage lambda was found to be dependent on the host growth rate in both wild-type bacteria and clpP and clpX mutants. The activities of two major lambda promoters operating during the lytic development, p(R) and p(L), were found to be slightly dependent on the host growth rate. However, when p(R) activity was significantly decreased in the dnaA mutant, production of phage progeny was completely abolished at low growth rates. These results indicate that the O protein (whose level in E. coli cells depends on the activity of ClpP/ClpX protease) is a major limiting factor in the regulation of lambda plasmid replication at low bacterial growth rates. However, this protein seems to be only one of the limiting factors in the bacteriophage lambda lytic development under poor growth conditions of host cells. Therefore, it seems that the role of the rapid ClpP/ClpX-mediated proteolysis of the O protein is to decrease the efficiency of early DNA replication of the phage in slowly growing host cells.     

Rapid analysis of lambda gt11 fusion proteins without subcloning or lysogen induction.

Current methods of analyzing fusion proteins from lambda gt11 clones involve either subcloning of the insert DNA into a plasmid expression vector or production of lambda gt11 lysogens that are subsequently induced. Both of these methods can be quite time-consuming. The present communication describes a novel strategy for induction of the fusion protein that is both simple and rapid. Liquid cultures of E. coli Y1090R- infected with the lambda gt11 clone were induced directly to produce the fusion protein. Following the preparation of a crude bacterial cell lysate, fusion products were subjected to Western blot analysis.     

Molecular cloning of invasion plasmid antigen (ipa) genes from Shigella flexneri: analysis of ipa gene products and genetic mapping.

Tn5-tagged invasion plasmid DNA (pWR110) from Shigella flexneri serotype 5 (strain M90T) was cloned into the expression vector lambda gt11. Recombinant phage (lambda gt11Sfl) expressing pWR110-encoded polypeptide antigens were identified by using rabbit antisera directed against S. flexneri M90T invasion plasmid antigens. Antigens encoded by lambda gt11Sfl recombinant phage were characterized by reacting affinity-purified antibodies, eluted from nitrocellulose-bound plaques of lambda gt11Sfl recombinants, with virulent, wild-type S. flexneri M90T polypeptides in Western blot analyses. lambda gt11Sfl clones directing the synthesis of complete, truncated, and beta-galactosidase fusion versions of three previously identified outer membrane polypeptides (57-, 43-, and 39-kilodalton [kDa] antigens) were isolated. A fourth polypeptide, similar in size to the 57-kDa antigen (ca. 58 kDa) but unrelated as determined by DNA homology and serological measurements, was also identified. Southern blot analysis of S. flexneri M90T invasion plasmid DNA hybridized with lambda gt11Sfl insert DNA probes was used to construct a map of invasion plasmid antigen genes (ipa) corresponding to the 57-kDa (ipaB), 43-kDa (ipaC), and 39-kDa (ipaD) polypeptides. Genes ipaB, ipaC and ipaD mapped to contiguous 4.6-kilobase (kb) and 1.0-kb HindIII fragments contained within a larger (23-kb) BamHI fragment. The ipaH gene, which encodes the synthesis of the 58-kDa polypeptide, did not map in or near the ipaBCD gene cluster, suggesting a distinct location of ipaH on the invasion plasmid.