Purification of α-amylase from Bacillus lentus cultures

Acetone fractionation of Bacillus lentus culture filtrate yielded the highest -amylase activity and the 66.6% fraction reached 13-fold that of the crude enzyme preparation. Gel filtration and ion exchange chromatography afforded a pure -amylase (relative molecular mass, 42 000). The pure enzyme was highly active on starch and dextrin. It produced a mixture of oligosaccharides as major products of starch hydrolysis. Maximal activity was reached at 70° C and pH 6.1. Ca²⁺, Na⁺, K⁺ and Sr²⁺ ions stabilized or slightly stimulated the enzyme whereas Ag⁺, Co²⁺, Hg²⁺, Zn²⁺, Cd²⁺ and Fe³⁺ ions strongly inhibited the activity. The enzyme contained 16 amino acids, of which aspartic and glutamic acids were present in the highest proportions. Correspondence to: S. H. Omar     

Purification and properties of heat stable α-amylase from Bacillus brevis

Summary An extracellular -amylase has been isolated from a continuous culture of a thermophilic strain of Bacillus brevis. This enzyme was purified eightfold and obtained in electrophoretically homogenous form. The enzyme had a molecular weight of about 58000, a pH optimum from 5.0 to 9.0 and a temperature optimum at 80°C. The half-life of the purified enzyme in the presence of 5 mM CaCl₂ at 90° C and pH 8.0 was 20 min. The K _m value for soluble starch was calculated to be 0.8 mg/ml.     

Conformational destabilization of Bacillus licheniformis α-amylase induced by lysine modification and calcium depletion

Bacillus licheniformis α-amylase (BLA) was chemically modified using 100-fold molar excess of succinic anhydride over protein or 0.66 M potassium cyanate to obtain 42 % succinylated and 81 % carbamylated BLAs. Size and charge homogeneity of modified preparations was established by Sephacryl S-200 HR gel chromatography and polyacrylamide gel electrophoresis. Conformational alteration in these preparations was evident by the larger Stokes radii (3.40 nm for carbamylated and 3.34 nm for succinylated BLAs) compared to 2.43 nm obtained for native BLA. Urea denaturation results using mean residue ellipticity (MRE) as a probe also showed conformational destabilization based on the early start of transition as well as ΔG(D)(H(2)O) values obtained for both modified derivatives and Ca-depleted BLA. Decrease in ΔG(D)(H(2)O) value from 5,930 cal/mol (for native BLA) to 3,957 cal/mol (for succinylated BLA), 3,336 cal/mol (for carbamylated BLA) and 3,430 cal/mol for Ca-depleted BLA suggested reduced conformational stability upon modification of amino groups of BLA or depletion of calcium. Since both succinylation and carbamylation reactions abolish the positive charge on amino groups (both α- and ε- amino), the decrease in conformational stability can be ascribed to the disruption of salt bridges present in the protein which might have released the intrinsic calcium from its binding site.     

Purification of recombinant α-amylase by immunoaffinity chromatography with anti-peptide antibody

Adsorption characteristics of an anti-peptide antibody, obtained by immunization of eight amino acids in the C-terminal region of chimeric α-amylase of rice α-amylase isozymes, were studied by use of the chimeric enzyme and the peptide used for immunization. This anti-peptide antibody adsorbed the enzyme, as well as the peptide antigen, with sufficient affinity for immunoaffinity purification and was used for purification of the enzyme secreted from yeast cells. Chimeric α-amylase was purified by immunoaffinity chromatography to high purity in one step from the fermentation broth. One-third of the secreted enzyme was not adsorbed by the column of anti-peptide antibody because of processing in the C-terminal region.     

Purification, characterisation and mutagenic enhancement of a thermoactive α-amylase from Bacillus subtilis

Bacillus subtilis was isolated from flour mill wastes. It produced a thermostable α-amylase in complex media containing starch. Amylase activity was optimal at the exponential phase and was more strongly expressed with sorghum, yam peel and corn starch than soluble potato starch. The enzyme was purified 24-fold to a specific activity of 2200 U mg⁻¹, with a yield of 10%. It yielded a single band when subjected to SDS-PAGE and an apparent molecular mass of 54780 was determined by mass spectrometry. The enzyme, which was optimally active at 80°C and pH 5.6, released saccharides with a polymerisation degree of 1–6 following hydrolysis of yam peel, sorghum and corn starch. Cells of B. subtilis were exposed to ultraviolet irradiation and N-methyl-N′-nitro-N-nitrosoguanidine. Hyperproductive mutants were obtained by these treatments. Received 14 February 1997/ Accepted in revised form 13 August 1997     

Purification of α-amylase by specific elution from anti-peptide antibodies

Chimeric α-amylase, produced by recombinant yeast cells, was purified by immunoaffinity chromatography by use of an anti-peptide antibody and an eluent containing an antigen peptide. Chimeric α-amylase was adsorbed by the antibody against the peptide corresponding to the C-terminal region of target α-amylase, and specifically eluted by the eluent containing the antigen peptide used for immunization. A low concentration of the peptide could competitively elute adsorbed α-amylase, and the rate-limiting step of the elution was mass transfer of desorbed α-amylase. With this specific method, target proteins can be effectively eluted, and highly purified under mild conditions, from the antibody ligand showing a high-affinity for the adsorption step. Received: 14 November 1996 / Received revising: 16 December 1996 / Accepted: 17 January 1997     

Effect of temperature on some characteristics of the thermostable α-amylase from Bacillus licheniformis

The V _max of an extracellular, thermostable -amylase from Bacillus licheniformis 44MB82 were 5.70×10^-3 and 9.70×10^-3 mM s^-1 at 30 and 90°C, respectively, whereas the K _m values were similar (0.9 mg ml^-1) at both temperatures. Excluding dextrins, the dominant products from soluble starch and amylopectin hydrolysis contained less than six glucose residues. The enzyme hydrolysed amylopectin better than soluble starch. Increasing the temperature from 30 to 90°C was accompanied by an increase in the production of malto-oligosaccharides, especially maltotetrose, and this was related to the secondary hydrolysis of maltopentose and maltohexose.The authors are with the Institute of Microbiology, Bulgarian Academy of Sciences, Sofia 1113. 26 Academician G. Bonchev, Bulgaria     

Purification and Properties of α-Glucosidase from Bacillus cereus

α-Glucosidase has been isolated from Bacillus cereus in ultracentrifugally and electrophoretically homogeneous form, and its properties have been investigated. The enzyme has a sedimentation constant of 1.4 S and a molecular weight of 12,000. The highly purified enzyme splits α-d-(1→4)-glucosidic linkages in maltose, maltotriose, and phenyl α-maltoside, but shows little or no activity toward polysaccharides, such as amylose, amylopectin, glycogen and soluble starch. The enzyme has α-glucosyltransferase activity, the main transfer product from maltose being maltotriose. The enzyme can also catalyze the transfer of α-glucosyl residue from maltose to riboflavin. On the basis of inhibition studies with diazonium-1-H-tetrazole, rose bengal and p-chloromercuribenzoate, it is assumed that the enzyme contains both histidine and cysteine residues in the active center.     

Thermostable α-amylase production by immobilized Bacillus licheniformis cells in agar gel and on acrylonitrile/acrylamide membranes

Immobilized cells of Bacillus licheniformis 44MB82-G were used for the production of thermostable -amylase. The immobilization was carried out by entrapment in agar gel or by binding to formaldehyde-activated acrylonitrile/acrylamide membranes. The -amylase production after 144 h of cultivation of membrane immobilized cells was 40% higher in comparison with the free cells. The respective value for the agar-entrapped cells was 22%. Similar trends were observed in the repeated batch fermentations performed with the immobilized cells. The scanning electron micrographs (SEM) of the immobilized cells gave additional information about their binding to the respective carriers.     

Immobilization of Bacillus licheniformis α-amylase onto reactive polymer films

Alpha-amylase was covalently immobilized onto maleic anhydride copolymer films preserving activity. The initial activity of the immobilized layers strongly depended on the immobilization solution, and on the physicochemical properties of the copolymer film. Higher enzyme loading (quantified by amino acid analysis using HPLC) and activity (measured by following starch hydrolysis) were attainable onto hydrophilic, highly swelling 3-D poly(ethylene-alt-maleic anhydride) (PEMA) copolymer films, while immobilization onto hydrophobic poly(octadecene-alt-maleic anhydride) (POMA) copolymer films resulted in low content enzyme layers and lower activity. No significant activity was lost upon dehydration/re-hydration or storage of enzyme containing PEMA copolymer layers in deionised water for up to 48 h. In contrast, α-amylase decorated POMA films suffered a significant activity loss under those conditions. The distinct behaviours may be attributed to the different intrinsic physicochemical properties of the copolymer films. The compact, hydrophobic POMA films possibly favours hydrophobic interactions between the hydrophobic moieties of the protein and the surface, which may result in conformational changes, and consequent loss of activity. Surprisingly, residual activity was found after harsh treatments of active α-amylase PEMA based layers revealing that immobilization onto the hydrophilic polymer films improved the stability of the enzyme.     

Purification and characterization of β-mannanase from Bacillus licheniformis for industrial use

An easily scaled-up technique has been designed to purify -mannanase from Bacillus licheniformis. Using flocculation, ultrafiltration and ion-exchange chromatography, the enzyme was purified 33-fold with a final recovery of 47% and a specific activity of 4341 U mg^–1protein. The enzyme had maximum activity at 60 °C and pH 7.0. It was stable at 50 °C and pH 6.0 for 6 h, but lost all of its activity when held at 70 °C and pH 6.0 for 1 h.     

Purification and properties of β-amylase from Bacillus circulans S31

A thermotolerant -amylase was purified from Bacillus circulans S31 isolated from soil in Hong Kong. The purified enzyme has an M _r of 64 kDa and was stable at 50°C and pH 7.0 for 30 min. Its K _m for starch was 0.9 mg/ml with a V _max of 0.3 mg/min. It was not activated by any metal ion although sulphydrys reagents were inhibitory.H.S. Kwan, K.H. So and K.Y. Chan are with the Department of Biology, The Chinese University of Hong Kong, Shatin, N.T., Hong Kong S.C. Cheng is with the Department of Applied Biology and Chemical Technology, Hong Kong Polytechnic, Hung Hom, Hong Kong.     

Purification and properties of an α-amylase inhibitor from wheat

Four inhibitors of α-amylase (EC 3.2.1.1) were separated from an alcohol extract of wheat by ion-change chromatography on DE52-cellulose. One inhibitor, which showed the greatest specificity for human salivary amylase relative to human pancreatic amylase, has been purified by the following steps: (a) alcohol fractionation (60–90%) of water extract (b) ion-exchange chromatography on QAE-Sephadex A-50; (c) re-chromatography on DE52-cellulose and (d) gel filtration on Sephadex G-50. The purified inhibitor is 100 times more specific for human salivary amylase than for human pancreatic amylase. It shows an electrophoretic mobility of 0.2 on disc gel electrophoresis and a molecular weight of about 21 000. This inhibitor contributes about 16% to the total salivary amylase inhibiting power of the wheat extract.     

Purification and characterization of a maltooligosaccharide-forming α-amylase from a new Bacillus subtilis KCC103

A maltooligosaccharide-forming α-amylase was produced by a new soil isolate Bacillus subtilis KCC103. In contrast to other Bacillus species, the synthesis of α-amylase in KCC103 was not catabolite-repressed. The α-amylase was purified in one step using anion exchange chromatography after concentration of crude enzyme by acetone precipitation. The purified α-amylase had a molecular mass of 53 kDa. It was highly active over a broad pH range from 5 to 7 and stable in a wide pH range between 4 and 9. Though optimum temperature was 65–70 °C, it was rapidly deactivated at 70 °C with a half-life of 7 min and at 50 °C, the half-life was 94 min. The K _m and V _max for starch hydrolysis were 2.6 mg ml⁻¹ and 909 U mg⁻¹, respectively. Ca²⁺ did not enhance the activity and stability of the enzyme; however, EDTA (50 mM) abolished 50% of the activity. Hg²⁺, Ag²⁺, and p-hydroxymercurybenzoate severely inhibited the activity indicating the role of sulfydryl group in catalysis. The α-amylase displayed endolytic activity and formed maltooligosaccharides on hydrolysis of soluble starch at pH 4 and 7. Small maltooligosaccharides (D2–D4) were formed more predominantly than larger maltooligosaccharides (D5–D7). This maltooligosaccharide forming endo-α-amylase is useful in bread making as an antistaling agent and it can be produced economically using low-cost sugarcane bagasse.     

Integration,amplification and expression of the Bacillus licheniformis α-amylase gene in Bacillus subtilis chromosome

We have introduced the α-amylase gene from Bacillus licheniformis (amy gene) in a non-replicative plasmid which can be conveniently integrated and amplified at a specific site of the B. subtilis chromosome. Although we were able to select spontaneous and stable gene amplification of about 20 integrated copies, the amylase secretion remained very low. A DNA fragment presenting a high promoter activity in B. subtilis was therefore inserted upstream from the amy gene coding sequence, leading to a significant increase of amylase production. However, the amplified structures obtained with this construction were found to contain no more than 12 copies of the amy gene and to be rather unstable when cells were grown under non-selective conditions.     

Transfer and expression of a Bacillus licheniformis α-amylase gene in Zymomonas mobilis

The gene from Bacillus licheniformis coding for a thermostable -amylase was subcloned into the broad-host-range plasmid pKT210 in Escherichia coli. The recombinant plasmid pGNB6 was transferred into Zymomonas mobilis ATCC 31821 by conjugation. Plasmid pGNB6 was stably maintained in E. coli and unstable in Z. mobilis. The amylase gene was expressed in Z. mobilis at a lower level (25%) than in E. coli and regulation of enzyme biosynthesis was different in the host cells. Almost all the -amylase activity was recovered in the culture medium of Z. mobilis. This enzyme localization seemed to be the result of protein secretion rather than cell lysis. Integration of the amylase gene into a cryptic plasmid of Z. mobilis was observed. The amylase gene was still expressed, although at a lower level, and the -amylase activity, associated with a protein of molecular mass 62,000 daltons, was immunologically identical in Z. mobilis, E. coli and B. licheniformis.     

Significance of Tyr302, His235 and Asp194 in the α-amylase from Bacillus licheniformis

The calcium-binding residues, Tyr302 and His235, and the sodium-binding residue, Asp194, on the activity of Bacillus licheniformis α-amylase were investigated using site-directed mutagenesis. Tyr302 and His235 were replaced by Asn and Asp, respectively, to produce the mutants Y302N and H235D; Asp194 was replaced by Ala to produce D194A. The mutant amylases were purified to homogeneity; each was ~53?kDa. The specific activity of the D194A was 236?U?mg(-1), lower than the specific activity of the wild-type enzyme by 55%. No significant changes of thermostability, optimum temperature, and optimum pH level were observed in D194A. Mutant amylases with H235D and Y302N significantly improved their specific activity by 43% (754?U?mg(-1)) and 7% (563?U?mg(-1)), respectively, compared with the wild-type enzyme. H235D substitution decreased its optimum pH by approx. 0.5-1 pH unit.     

Production of α-amylase in a low cost medium by Bacillus licheniformis TCRDC-B13

A low cost synthetic medium producing large quantities of α-amylase has been developed. Bacillus licheniformis TCRDC-B13 isolated from soil was used for α-amylase production. The α-amylase enzyme of this strain showed excellent stability at high temperatures and over a wide pH range. The low cost medium produced 5 times more enzyme than the high cost synthetic medium (using yeast extract and peptone) in shake flasks. In a 2.6-l fermentor, the enzyme production further doubled.     

Influence of succinic acid on the extracellular α-amylase production by chemostat-crow Bacillus licheniformis

Summary An 8-fold increase in -amylase production by pulsing of succinic acid to a chemostat culture ofBacillus licheniformis has been shown. The -amylase concentration was found to be at the highest value two doubling times after the addition, indicating that the effect may be due to regulatory control.     

Escherichia coli signal peptidase recognizes and cleaves the signal sequence of α-amylase originating from Bacillus licheniformis

The gene encoding the α-amylase from Bacillus licheniformis was cloned, with and without the native signal sequence, and expressed in Escherichia coli, resulting in the production of the recombinant protein in the cytoplasm as insoluble but enzymatically active aggregates. Expression with a low concentration of the inducer at low temperature resulted in the production of the recombinant protein in soluble form in a significantly higher amount. The protein produced with signal sequence was exported to the extracellular medium, whereas there was no export of the protein produced from the gene without the signal sequence. Similarly, the α-amylase activity in the culture medium increased with time after induction in case of the protein produced with signal sequence. Molecular mass determinations by MALDI-TOF mass spectrometry and N-terminal amino acid sequencing of the purified recombinant α-amylase from the extracellular medium revealed that the native signal peptide was cleaved by E. coli signal peptidase between Ala28 and Ala29. It seems possible that the signal peptide of α-amylase from B. licheniformis can be used for the secretion of other recombinant proteins produced using the E. coli expression system.