Structural requirements for gp80 independence of human herpesvirus 8 interleukin-6 (vIL-6) and evidence for gp80 stabilization of gp130 signaling complexes induced by vIL-6

Human herpesvirus 8 interleukin-6 (vIL-6) displays 25% amino acid identity with human IL-6 (hIL-6) and shares an overall four-helix-bundle structure and gp130-mediated STAT/mitogen-activated protein kinase signaling with its cellular counterpart. However, vIL-6 is distinct in that it can signal through gp130 alone, in the absence of the nonsignaling gp80 alpha-subunit of the IL-6 receptor. To investigate the structural requirements for gp80 independence of vIL-6, a series of expression vectors encoding vIL-6/hIL-6 chimeric and site-mutated IL-6 proteins was generated. The replacement of hIL-6 residues with three vIL-6-specific tryptophans implicated in gp80 independence from crystallographic studies or the A and C helices containing these residues did not confer gp80 independence to hIL-6. The N- and C-terminal regions of vIL-6 could be substituted with hIL-6 sequences with the retention of gp80-independent signaling, but substitutions of other regions of vIL-6 (helix A, A/B loop, helix B, helix C, and proximal half of helix D) with equivalent sequences of hIL-6 abolished gp80 independence. Interestingly, the B helix of vIL-6 was absolutely required for gp80 independence, despite the fact that this region contains no receptor-binding residues. Point mutational analysis of helix C, which contains residues involved in physical and functional interactions with gp130 domains 2 and 3 (cytokine-binding homology region), identified a variant, VI120EE, that was able to signal and dimerize gp130 only in the presence of gp80. gp80 was also found to stabilize gp130:g130 dimers induced by a distal D helix variant of vIL-6 that was nonetheless able to signal independently of gp80. Together, our data reveal the crucial importance of overall vIL-6 structure and conformation for gp80-independent signaling and provide functional and physical evidence of the stabilization of vIL-6-induced gp130 signaling complexes by gp80.     

Structure-function analysis of human IL-6: identification of two distinct regions that are important for receptor binding.

Interleukin-6 (IL-6) is a multifunctional cytokine that plays an important role in host defense. It has been predicted that IL-6 may fold as a 4 alpha-helix bundle structure with up-up-down-down topology. Despite a high degree of sequence similarity (42%) the human and mouse IL-6 polypeptides display distinct species-specific activities. Although human IL-6 (hIL-6) is active in both human and mouse cell assays, mouse IL-6 (mIL-6) is not active on human cells. Previously, we demonstrated that the 5 C-terminal residues of mIL-6 are important for activity, conformation, and stability (Ward LD et al., 1993, Protein Sci 2:1472-1481). To further probe the structure-function relationship of this cytokine, we have constructed several human/mouse IL-6 hybrid molecules. Restriction endonuclease sites were introduced and used to ligate the human and mouse sequences at junction points situated at Leu-62 (Lys-65 in mIL-6) in the putative connecting loop AB between helices A and B, at Arg-113 (Val-117 in mIL-6) at the N-terminal end of helix C, at Lys-150 (Asp-152 in mIL-6) in the connecting loop CD between helices C and D, and at Leu-178 (Thr-180 in mIL-6) in helix D. Hybrid molecules consisting of various combinations of these fragments were constructed, expressed, and purified to homogeneity. The conformational integrity of the IL-6 hybrids was assessed by far-UV CD. Analysis of their biological activity in a human bioassay (using the HepG2 cell line), a mouse bioassay (using the 7TD1 cell line), and receptor binding properties indicates that at least 2 regions of hIL-6, residues 178-184 in helix D and residues 63-113 in the region incorporating part of the putative connecting loop AB through to the beginning of helix C, are critical for efficient binding to the human IL-6 receptor. For human IL-6, it would appear that interactions between residues Ala-180, Leu-181, and Met-184 and residues in the N-terminal region may be critical for maintaining the structure of the molecule; replacement of these residues with the corresponding 3 residues in mouse IL-6 correlated with a significant loss of alpha-helical content and a 200-fold reduction in activity in the mouse bioassay. A homology model of mIL-6 based on the X-ray structure of human granulocyte colony-stimulating factor is presented.     

Packing of the transmembrane helices of Na,K-ATPase: direct contact between beta-subunit and H8 segment of alpha-subunit revealed by oxidative cross-linking

Spatial relationships among the transmembrane (TM) segments of alpha- and beta-subunits of the Na,K-ATPase molecule have been investigated using oxidative induction of disulfide bonds. The catalytic alpha-subunit contains 10 TM alpha-helices (H1-H10) with 9 Cys residues located within or close to the membrane moiety. There is one Cys residue in the single TM segment of beta-subunit (Hbeta). Previously, the cross-linking products containing the beta-subunit and two fragments of alpha-subunit (the N-terminal containing H1-H2 helices and the C-terminal containing H7-H10 helices) have been identified in experiments with membrane-bound or detergent-solubilized preparations of the membrane moiety of trypsin-digested Na,K-ATPase [Sarvazyan, N. A., Modyanov, N. N., and Askari, A. (1995) J. Biol. Chem. 270, 26528-26532 and Sarvazyan, N. A., Ivanov, A., Modyanov, N. N., and Askari, A. (1997) J. Biol. Chem. 272, 7855-7858]. Here, we have shown that Cu(2+)-phenanthroline treatment of digitonin-solubilized preparation provides the most efficient formation of intersubunit cross-linked product that is predominantly a dimer of beta-subunit and a 22-kDa C-terminal alpha-fragment containing H7-H10 helices. This cross-linked product was isolated and subjected to CNBr cleavage. The resulting fragments were electrophoretically separated and sequenced. A 17-kDa peptide composed of Ile853-Met942 alpha-fragment and Ala5-Met56 beta-fragment was identified as a product of intersubunit disulfide cross-link between Cys44 of Hbeta and either Cys911 or Cys930, located in H8. This provides the first direct experimental evidence of the juxtaposition of Hbeta and H8 within the Na,K-ATPase molecule. The second detected cross-linked product was composed of alpha-fragments Lys947-Met963 and Tyr974-Tyr1016 linked by induced disulfide bridge between Cys964 (H9) and Cys983 (H10). The spatial proximity of these Cys residues defines the mutual orientation of H9 and H10 helices of alpha-subunit.     

Relative proximity and orientation of helices 4 and 8 of the GLUT1 glucose transporter

A structure has been proposed for glucose transporter-1 (GLUT1) based upon homology modeling that is consistent with the results of numerous mutagenesis studies (Mueckler, M., and Makepeace, C. (2004) J. Biol. Chem. 279, 10494-10499). To further test and refine this model, the relative orientation and proximity of transmembrane helices 4 and 8 were analyzed by chemical crosslinking of di-cysteine mutants created in a reporter GLUT1 construct. All six native cysteine residues of GLUT1 were changed to either glycine or serine residues by site-directed mutagenesis, resulting in a functional Glut1 construct with Cys mutated to Gly/Ser (C-less). The GLUT1 reporter molecule was engineered from C-less GLUT1 by creating a unique cleavage site for factor Xa protease within the central cytoplasmic loop and by eliminating the site of N-linked glycosylation. Fourteen functional di-cysteine mutants were then created from the C-less reporter construct, each mutant containing a single cysteine residue in helix 4 and one cysteine residue in helix 8. These mutants were expressed in Xenopus oocytes, and the sensitivity of each mutant to intramolecular crosslinking by two homo-bifunctional, thiol-specific crosslinking reagents, bismaleimidehexane and 1,4-phenylenedimaleimide, was ascertained by protease cleavage followed by immunoblot analysis. Four pairs of cysteine residues, Cys(148)/Cys(328), Cys(145)/Cys(328), Cys(148)/Cys(325), and Cys(145)/Cys(325), were observed to be in close enough proximity to be susceptible to crosslinking by one or both reagents. All five of the cysteine residues susceptible to crosslinking are predicted to lie on the same face of helix 4 or 8 and to reside close to the cytoplasmic face of the membrane. These data indicate that the cytoplasmic ends of helices 4 and 8 lie within 6-16 A of one another and that the two helices twist or tilt such that they are further than 16 A apart toward the center and the exoplasmic side of the membrane. An updated model for the clustering of the transmembrane helices of GLUT1 is presented based on these data.     

Expression, purification, refolding, and characterization of recombinant human interleukin-13: utilization of intracellular processing

Interleukin-13 (IL-13) is a pleiotropic cytokine that elicits both proinflammatory and anti-inflammatory immune responses. Recent studies underscore its role in several diseases, including asthma and cancer. Solution studies of IL-13 and its soluble receptors may facilitate the design of antagonists/agonists which would require milligram quantities of specifically labeled protein. A synthetic gene encoding human IL-13 (hIL-13) was inserted into the pMAL-c2 vector with a cleavage site for the tobacco etch virus (TEV) protease. Coexpression of the fusion protein and TEV protease led to in vivo cleavage, resulting in high levels of hIL-13 production. hIL-13, localized to inclusion bodies, was purified and refolded to yield approximately 2 mg per liter of bacteria grown in minimal media. Subsequent biochemical and biophysical analysis of both the unlabeled and (15)N-labeled protein revealed a bioactive helical monomer. In addition, the two disulfide bonds were unambiguously demonstrated to be Cys29-Cys57 and Cys45-Cys71 by a combined proteolytic digestion and mass spectrometric analysis.     

Generation of interleukin-6 receptor antagonists by molecular-modeling guided mutagenesis of residues important for gp130 activation.

Interleukin-6 (IL-6) drives the sequential assembly of a receptor complex formed by the IL-6 receptor (IL-6R alpha) and the signal transducing subunit, gp130. A model of human IL-6 (hIL-6) was constructed by homology using the structure of bovine granulocyte colony stimulating factor. The modeled cytokine was predicted to interact sequentially with the cytokine binding domains of IL-6R alpha and gp130 bridging them in a way similar to that of the interaction between growth hormone and its homodimeric receptor. Several residues on helices A and C which were predicted as contact points between IL-6 and gp130 and therefore essential for IL-6 signal transduction, were subjected to site-directed mutagenesis individually or in combined form. Interestingly, while single amino acid changes never produced major alterations in IL-6 bioactivity, a subset of double mutants of Y31 and G35 showed a considerable reduction of biological activity and were selectively impaired from associating with gp130 in binding assays in vitro, while they maintained wild-type affinity towards hIL-6-R alpha. More importantly, we demonstrated the antagonistic effect of mutant Y31D/G35F versus wild-type IL-6.     

Signaling domain of the aspartate receptor is a helical hairpin with a localized kinase docking surface: cysteine and disulfide scanning studies.

Cysteine and disulfide scanning has been employed to probe the signaling domain, a highly conserved motif found in the cytoplasmic region of the aspartate receptor of bacterial chemotaxis and related members of the taxis receptor family. Previous work has characterized the N-terminal section of the signaling domain [Bass, R. B., and Falke, J. J. (1998) J. Biol. Chem. 273, 25006-25014], while the present study focuses on the C-terminal section and the interactions between these two regions. Engineered cysteine residues are incorporated at positions Gly388 through Ile419 in the signaling domain, thereby generating a library of receptors each containing a single cysteine per receptor subunit. The solvent exposure of each cysteine is ascertained by chemical reactivity measurements, revealing a periodic pattern of buried hydrophobic and exposed polar residues characteristic of an amphipathic alpha-helix, denoted helix alpha8. The helix begins between positions R392 and Val401, then continues through the last residue scanned, Ile419. Activity assays carried out both in vivo and in vitro indicate that both the buried and exposed faces of this amphipathic helix are critical for proper receptor function and the buried surface is especially important for kinase downregulation. Patterns of disulfide bond formation suggest that helix alpha8, together with the immediately N-terminal helix alpha7, forms a helical hairpin that associates with a symmetric hairpin from the other subunit of the homodimer, generating an antiparallel four helix bundle containing helices alpha7, alpha7', alpha8, and alpha8'. Finally, the protein-interactions-by-cysteine-modification (PICM) method suggests that the loop between helices alpha7 and alpha8 interacts with the kinase CheA and/or the coupling protein CheW, expanding the receptor surface implicated in kinase docking.     

Helices VII and X in the lactose permease of Escherichia coli: proximity and ligand-induced distance changes.

By using functional lactose permease devoid of native Cys residues with a discontinuity in the periplasmic loop between helices VII and VIII (N(7)/C(5) split permease), cross-linking between engineered paired Cys residues in helices VII and X was studied with the homobifunctional, thiol-specific cross-linkers 1,1-methanediyl bismethanethiosulfonate (3 A), N,N'-o- phenylenedimaleimide (6 A) and N,N'-p-phenylenedimaleimide (10 A). Mutant Asp240-->Cys (helix VII)/Lys319-->Cys (helix X) cross-links most efficiently with the 3 A reagent, providing direct support for studies indicating that Asp240 and Lys319 are in close proximity and charge paired. Furthermore, cross-linking the two positions inactivates the protein. Other Cys residues more disposed towards the middle of helix VII cross-link to Cys residues in the approximate middle of helix X, while no cross-linking is evident with paired Cys residues at the periplasmic or cytoplasmic ends of these helices. Thus, helices VII and X are in close proximity in the middle of the membrane. In the presence of ligand, the distance between Cys residues at positions 240 (helice VII) and 319 (helix X) increases. In contrast, the distance between paired Cys residues more disposed towards the cytoplasmic face of the membrane decreases in a manner suggesting that ligand binding induces a scissors-like movement between the two helices. The results are consistent with a recently proposed mechanism for lactose/H(+) symport in which substrate binding induces a conformational change between helices VII and X, during transfer of H(+) from His322 (helix X)/Glu269 (helix VIII) to Glu325 (helix X).     

Helix packing in the lactose permease of Escherichia coli determined by site-directed thiol cross-linking: helix I is close to helices V and XI

Coexpression of lacY gene fragments encoding the first two transmembrane domains and the remaining 10 transmembrane domains complement in the membrane and catalyze active lactose transport [Wrubel, W., Stochaj, U., et al. (1990) J. Bacteriol. 172, 5374-5381]. Accordingly, a plasmid encoding contiguous, nonoverlapping permease fragments with a discontinuity in the cytoplasmic loop between helices II and III (loop II/III) was constructed (N2C10 permease). When Phe27 (helix I) is replaced with Cys, cross-linking is observed with two native Cys residues, Cys148 (helix V) and Cys355 (helix XI). Cross-linking of a Cys residue at position 27 to Cys148 occurs with N,N'-o-phenylenedimaleimide (o-PDM; rigid 6 A), with N,N'-p-phenylenedimaleimide (p-PDM; rigid 10 A), or with 1,6-bis(maleimido)hexane (BMH; flexible 16 A). On the other hand, with the Phe27-->Cys/Cys355 pair, cross-linking is observed with p-PDM or BMH but not o-PDM. In neither case is cross-linking observed with iodine. It is suggested that a Cys residue at position 27 is within 6-10 A from Cys148 and about 10 A from Cys355. The results provide evidence for proximity between helix I and helices V or XI in the tertiary structure of the permease. In addition, the findings are consistent with other results [Venkatesan, P., Kaback, H. R. (1998) Proc. Natl. Acad. Sci. U.S.A. 95, 9802-9807] indicating that Glu126 (helix IV) and Arg144 (helix V) are within the membrane, rather than at the membrane-water interface on the cytoplasmic face.     

3D modeling and molecular dynamics simulation of an immune-regulatory cytokine,interleukin-10, from the Indian major carp, <Emphasis Type="Italic">Catla catla</Emphasis>

Interleukin-10 (IL-10) is a pleiotropic immune-regulatory cytokine that is expressed in various species of fish and higher vertebrates, and is activated during infection. In spite of its important role, IL-10 has not been well characterized either functionally or structurally in fish. To analyze its properties and function, we constructed a 3D model of IL-10 in the Indian major carp, the catla (Catla catla), which is a highly preferred fish species and the most commercially important one in the Indian subcontinent. The catla IL-10 model was constructed by comparative modeling using human IL-10 (2ILK) as the template, and a 5 ns molecular dynamics (MD) simulation was carried out to characterize its structural and dynamical features, which was validated by the SAVES, WHAT IF and MolProbity servers. Analysis using the VAST server revealed a comparatively low level of homology between catla and human IL-10 amino acids at the N-terminal (22.7%) compared to the C-terminal (38.29%). Six conserved domains (A–F) were predicted in catla that threaded well with human IL-10, but their putative interaction sites varied significantly. The amino acid residues in helices A and F differed in length between catla and human IL-10, which may lead to the differences in the IL-10/IL-10R complexes of these two species. The existence of two highly conserved amino acid residues (Cys5 and Cys10) in fish IL-10 but not in higher vertebrate (including human) IL-10 was analyzed in this 3D model. CastP, cons-PPISP and InterProSurf server identified several binding pockets with various probe radii, but Cys5 and Cys10 did not form any significant bonds relating to structural stabilization or protein–protein interactions.     

Structure and function in rhodopsin: effects of disulfide cross-links in the cytoplasmic face of rhodopsin on transducin activation and phosphorylation by rhodopsin kinase.

Six rhodopsin mutants containing disulfide cross-links between different cytoplasmic regions were prepared: disulfide bond 1, between Cys65 (interhelical loop I-II) and Cys316 (end of helix VII); disulfide bond 2, between Cys246 (end of helix VI) and Cys312 (end of helix VII); disulfide bond 3, between Cys139 (end of helix III) and Cys248 (end of helix VI); disulfide bond 4, between Cys139 (end of helix III) and Cys250 (end of helix VI); disulfide bond 5, between Cys135 (end of helix III) and Cys250 (end of helix VI); and disulfide bond 6, between Cys245 (end of helix VI) and Cys338 (C-terminus). The effects of local restrictions caused by the cross-links on transducin (G(T)) activation and phosphorylation by rhodopsin kinase (RK) following illumination were studied. Disulfide bond 1 showed little effect on either G(T) activation or phosphorylation by RK, suggesting that the relative motion between interhelical loop I-II and helix VII is not crucial for recognition by G(T) or by RK. In contrast, disulfide bonds 2-5 abolished both G(T) activation and phosphorylation by RK. Disulfide bond 6 resulted in enhanced G(T) activation but abolished phosphorylation by RK, suggesting the structure recognized by G(T) was stabilized in this mutant by cross-linking of the C-terminus to the cytoplasmic end of helix VI. Thus, the consequences of the disulfide cross-links depended on the location of the restriction. In particular, relative motions of helix VI, with respect to both helices III and VII upon light activation, are required for recognition of rhodopsin by both G(T) and RK. Further, the conformational changes in the cytoplasmic face that are necessary for protein-protein interactions need not be cooperative, and may be segmental.     

Structure-function studies of PANDER, an islet specific cytokine inducing cell death of insulin-secreting beta cells

PANDER (pancreatic derived factor, FAM3B) is a novel cytokine, present in insulin secretory granules, that induces apoptosis of alpha and beta cells of mouse, rat, and human islets in a dose- and time-dependent manner, and may be implicated in diabetes. PANDER has the predicted secondary structure of 4 alpha-helical bundles with an up-up-down-down topology, and two disulfide bonds. Eleven mutated PANDERs were constructed and expressed in beta-TC3 cells to identify the essential region of PANDER involved in beta-cell death. Beta-cell function was assessed by assays of cell viability and insulin secretion. Based on quantitative real-time RT-PCR all mutant PANDERs had similar mRNA expression levels in beta-TC3 cells. Immunoblotting showed that ten of eleven mutant PANDER proteins were synthesized and detected in beta-TC3 cells. A mutant PANDER with no signal peptide, however, was not expressed. Truncation of helix D alone caused a 40-50% decrease in PANDER's activity, while truncation of both helices C and D resulted in a 75% loss of activity. In contrast, truncation of the N-terminus of PANDER (helix A, the loop between helices A and B, and the first two cysteines) had no effect on PANDER-induced beta-cell death. The third and fourth cysteines of PANDER, C91 and C229, were shown to form one disulfide bond and be functionally important. Finally, the region between Cys91 and Phe152 constitutes the active part of PANDER, based on the demonstration that mutants with truncation of helix B or C caused decreased beta-cell death and did not inhibit insulin secretion, as compared to wild-type PANDER. Hence, helices B and C and the second disulfide bond of PANDER are essential for PANDER-induced beta-cell death.     

Essential role of the conformational flexibility of helices 1 and 5 on the lipid binding activity of apolipophorin-III.

It has been recently postulated that the conformational flexibility of helices 1 and 5 of Locusta migratoria apoLp-III could play an important role in early steps of binding of this apolipoprotein to a lipid surface (Soulages, J. L., and Arrese, E. L. (2000) J. Biol. Chem. 275, 17501-17509). To test this model, we have designed a double Cys mutant in which a disulfide bond linking helices 1 and 5 could be formed, resulting in an apolipoprotein with reduced conformational flexibility of its N- and C-terminal helices. Substitution of Thr(18) and Ala(147) by Cys residues provided a protein that under nonreducing conditions was fully oxidized. The far-UV CD spectra of this mutant in the reduced and oxidized states indicated that their secondary structures were identical to the structure of the wild type recombinant apoLp-III, which contains no Cys residues. Near-UV CD studies confirmed the formation of a disulfide bond and the absence of structural perturbations. The lipid binding activity of the reduced mutant, as determined by its ability to form discoidal lipoproteins, was nearly identical to that of the wild type protein. Contrarily, the disulfide form of the mutant was not able to form discoidal lipoproteins with liposomes of either dimirystoylphosphatidylcholine or dimyristoylphosphatidylglycerol. It is concluded that the separation of the helices 1 and 5 constitutes one of the key steps along the complex pathway for the formation of the final apolipoprotein lipid-bound state. It is inferred that the conformational flexibility of helices 1 and 5 is a key property of apoLp-III, allowing the exposure of hydrophobic protein regions and the interaction of the hydrophobic faces of the amphipathic alpha-helices with the lipoprotein lipid surface.     

Proximity relationships between helices I and XI or XII in the lactose permease of Escherichia coli determined by site-directed thiol cross-linking.

The lactose permease of Escherichia coli was expressed in two fragments (split permease), each with a Cys residue, and cross-linking was studied. Split permease with a discontinuity in either loop II/III (N2C10permease) or loop VI/VII (N6C6permease) was used. Proximity of multiple pairs of Cys residues in helices I and XI or XII was examined by using three homobifunctional thiol-specific cross-linking reagents of different lengths and flexibilities (6 A, rigid; 10 A, rigid; 16 A, flexible) or iodine. Cys residues in the periplasmic half of helix I cross-link to Cys residues in the periplasmic half of helix XI. In contrast, no cross-linking is evident with paired Cys residues near the cytoplasmic ends of helices I and XI. Therefore, the periplasmic halves of helices I and XI are in close proximity, and the helices tilt away from each other towards the cytoplasmic face of the membrane. Cross-linking is also found with paired Cys residues near the middle of helices I and XII, but not with paired Cys residues near either end of the helices. Thus, helices I and XII are in close proximity only in the approximate middle of the membrane. Based on the findings, a modified helix packing model is proposed.     

Determination of the secondary structure and folding topology of human interleukin-4 using three-dimensional heteronuclear magnetic resonance spectroscopy.

The secondary structure of human recombinant interleukin-4 (IL-4) has been investigated by three-dimensional (3D) 15N- and 13C-edited nuclear Overhauser (NOE) spectroscopy on the basis of the 1H, 15N, and 13C assignments presented in the preceding paper [Powers, R., Garrett, D. S., March, C. J., Frieden, E. A., Gronenborn, A. M., & Clore, G. M. (1992) Biochemistry (preceding paper in this issue)]. Based on the NOE data involving the NH, C alpha H, and C beta H protons, as well as 3JHN alpha coupling constant, amide exchange, and 13C alpha and 13C beta secondary chemical shift data, it is shown that IL-4 consists of four long helices (residues 9-21, 45-64, 74-96, and 113-129), two small helical turns (residues 27-29 and 67-70), and a mini antiparallel beta-sheet (residues 32-34 and 110-112). In addition, the topological arrangement of the helices and the global fold could be readily deduced from a number of long-range interhelical NOEs identified in the 3D 13C-edited NOE spectrum in combination with the spatial restrictions imposed by three disulfide bridges. These data indicate that the helices of interleukin-4 are arranged in a left-handed four-helix bundle with two overhand connections.     

Structure function analysis of interleukin 7: requirement for an aromatic ring at position 143 of helix D

The residues located at the carboxyl terminus of helix D in interleukin-7 (IL-7) have previously been targeted as important for recruitment and binding to the gamma chain component of the IL-7 receptor (IL-7R). In this study, Trp 143 of helix D was mutated to His, Phe, Tyr and Pro and these mutants, along with a W143A mutant previously described, were studied to determine the effects on activation of DNA synthesis and binding affinity to IL-7R positive 2E8 cells. The W143F and W143Y mutants were similar to wild type IL-7 in their binding properties and retained 85% and 74% of their activating properties, respectively. In contrast, the W143H mutant possessed a lower binding affinity and a corresponding decrease in activation, the W143A mutant possessed an over 100-fold decreased binding affinity and some residual activation activity and the W143P mutant possessed a greatly decreased binding affinity and did not activate. These results strongly suggest an aromatic residue is required at position 143 for IL-7R binding and subsequent signal transduction.     

Structural model of human IL-13 defines the spatial interactions with the IL-13Ralpha/IL-4Ralpha receptor

Interleukin-13 (IL-13) plays a key role in immune responses and inflammation. A structural model of human IL-13 (HuIL-13) based on the nuclear magnetic resonance and X-ray structure of IL-4 is put forward. Unlike previous models, this model is based on new sequence alignments that take into account the formation of the two disulfide linkages that have been determined experimentally. The proposed structure of human IL-13 is similar to IL-4, consisting of a four helix bundle with hydrophobic residues lining the core of the molecule and surface polar residues showing a high degree of solvent accessibility. Regions of HuIL-13 that are critical for the interaction with its receptors are explored and discussed in relation to existing mutagenic studies. From these studies we predict that helices A and C of HuIL-13 interact with the IL-4 receptor alpha (IL-4Ralpha) region and helix D is responsible for the interaction with the IL-13 receptor alpha 1 (IL-13Ralpha1) receptor.     

Structural basis of ligand binding and release in insect pheromone-binding proteins: NMR structure of Antheraea polyphemus PBP1 at pH 4.5

The NMR structure of the Antheraea polyphemus pheromone-binding protein 1 at pH 4.5, ApolPBP1A, was determined at 20 degrees C. The structure consists of six alpha-helices, which are arranged in a globular fold that encapsulates a central helix alpha7 formed by the C-terminal polypeptide segment 131-142. The 3D arrangement of these helices is anchored by the three disulfide bonds 19-54, 50-108 and 97-117, which were identified by NMR. Superposition of the ApolPBP1A structure with the structure of the homologous pheromone-binding protein of Bombyx mori at pH 4.5, BmorPBPA, yielded an rmsd of 1.7 A calculated for the backbone heavy-atoms N, Calpha and C' of residues 10-142. In contrast, the present ApolPBP1A structure is different from a recently proposed molecular model for a low-pH form of ApolPBP1 that does not contain the central helix alpha7. ApolPBP1 exhibits a pH-dependent transition between two different globular conformations in slow exchange on the NMR chemical shift timescale similar to BmorPBP, suggesting that the two proteins use the same mechanism of ligand binding and ejection. The extensive sequence homology observed for pheromone-binding proteins from moth species further implies that the previously proposed mechanism of ligand ejection involving the insertion of a C-terminal helix into the pheromone-binding site is a general feature of pheromone signaling in moths.     

1H, 13C and 15N resonance assignments of a highly-soluble murine interleukin-3 analogue with wild-type bioactivity

Interleukin-3 (IL-3) is a cytokine that acts as a critical mediator of inflammation and immune responses to infections. IL-3, like interleukin-5 (IL-5) and granulocyte-macrophage colony stimulating factor (GM-CSF), exerts its effects on target cells via receptors composed of cytokine-specific α-subunits and a common β-subunit (βc-subunit, shared with IL-5 and GM-CSF). In contrast to humans, mice also possess an additional β-receptor, β_IL-3, that can specifically bind IL-3. Except for a study carried out on an analogue of human IL-3 that contains 14 mutations, structure-related studies of IL-3 have been very limited, largely because of its poor solution behaviour. Here we report ¹H, ¹³C, and ¹⁵N chemical shift assignments of murine IL-3 comprising residues 33–156 (SWISS-PROT accession number: P01586), in which the only mutation is an alanine substitution of Cys105. The mIL-3 construct used in the present study was engineered by eliminating residues 27–32 of the N-terminus (the first 26 residues of the primary sequence of mIL-3 are cleaved in vivo during secretion), the C-terminal 10 residues (157–166), and a disulfide bond between Cys105 and Cys166 that is poorly conserved in orthologue sequences. The new construct vastly improves the solubility of murine IL-3 while maintaining its wild-type biological activity.     

ATP synthase b subunit dimerization domain: a right-handed coiled coil with offset helices

The dimerization domain of Escherichia coli ATP synthase b subunit forms an atypical parallel two-stranded coiled coil. Sequence analysis reveals an 11-residue abcdefghijk repeat characteristic of right-handed coiled coils, but no other naturally occurring parallel dimeric structure of this class has been identified. The arrangement of the helices was studied by their propensity to form interhelix disulfide linkages and analysis of the stability and shape of disulfide-linked dimers. Disulfides formed preferentially between cysteine residues in an a position of one helix and either of the adjacent h positions of the partner. Such heterodimers were far more stable to thermal denaturation than homodimers and, on the basis of gel-filtration chromatography studies, were similar in shape to both non-covalent dimers and dimers linked through flexible Gly(1-3)Cys C-terminal extensions. The results indicate a right-handed coiled-coil structure with intrinsic asymmetry, the two helices being offset rather than in register. A function for the right-handed coiled coil in rotational catalysis is proposed.