Minimal essential origin of plasmid pSC101 replication: requirement of a region downstream of iterons.

The minimal replication origin (ori) of the plasmid pSC101 was defined as an about 220-bp region under the condition that the Rep (or RepA) protein, a plasmid-encoded initiator protein, was supplied in trans. The DnaA box is located at one end of ori, as in other plasmids, like mini-F and P1. The other border is a strong binding site (IR-1) of Rep which is palindromic sequence and lies in an about 50-bp region beyond the repeated sequences (iterons) in ori. This IR-1 is located just upstream of another strong Rep binding site (IR-2), the operator site of the structure gene of Rep (rep), but its function has not been determined. The present study shows that the IR-1 sequence capable of binding to Rep is essential for plasmid replication with a nearly normal copy number. Furthermore, a region between the third iteron and IR-1 is also required in a sequence-specific fashion, since some one-base substitution in this region inactivate the origin function. It is likely that the region also is a recognition site of an unknown protein. Three copy number mutations of rep can suppress any one-base substitution mutation. On the other hand, the sequence of a spacer region between the second and the third iterons, which is similar to that of the downstream region of the third iteron, can be changed without loss of the origin function. The requirement of the region downstream of iterons in pSC101 seems to be unique among iteron-driven plasmid replicons.     

DNA bending of pSC101 ori induced by Rep,a replication initiator protein and IHF

Purified Rep (or RepA) protein, a replication initiator of plasmid pSC101, is present almost solely in the dimer form, and its binding activity for the directly repeated sequences (iterons) in the replication origin (ori) is very low. When Rep protein was treated with guanidine hydrochloride followed by renaturation, it was shown to bind to the iterons with very high efficiency. A gel shift experiment suggested that guanidine-treated Rep bound to iterons as a monomer form. The Rep monomer bound noncooperatively to the three iterons and induced bending of the DNA helix axis in the same direction (about 100 degrees ). The configuration of the IHF box that is a binding site of another DNA bending protein IHF, the three iterons and an AT-rich region between these sequences was important for efficient bending of the ori region. Furthermore, a mutant Rep protein (Rep(IHF)) which can support the plasmid replication in IHF-deficient host cells was purified, and it was found that affinity of the Rep(IHF) monomer for iterons was similar to that of wild-type Rep and bent DNA only 14 degrees more strongly than did the wild-type Rep. Rep(IHF)-dependent plasmid replication, however, required both enhancer regions, par and IR-1, in addition to "core ori" as a minimal essential ori, whereas only one of these two enhancers was necessary for wild-type Rep-dependent replication. How Rep(IHF) can support plasmid replication in the absence of IHF is discussed.     

The structure and function of the replication initiator protein (Rep) of pSC101: an analysis based on a novel positive-selection system for the replication-deficient mutants

Plasmid pSC101 encodes a 37.5 kDa Rep (RepA) protein, which binds to three 21-base repeats (DR-1, DR-2, and DR-3) in the replication origin region (ori) of the plasmid to initiate replication. Rep also binds to two palindromic sequences (IR-1 and IR-2) which overlap the rep promoter. The binding of Rep to IR-2 represses the production of Rep itself. It is highly likely that the balance of these functions of Rep plays a major role in controlling the copy number of pSC101. In this study, we developed a positive-selection system for replication-deficient mutants of the initiator protein. This system can be applied to the study of other replication systems by changing ori and rep of pSC101 to the corresponding genes. Thirty-four replication-deficient (Ini(-)) mutants were isolated with this system, and analyzed as to the relation between the structure and function of the Rep protein. Seventeen of these 34 Ini(-) mutants were found to lack auto-repressor activity as well as initiator activity. DNA sequence analysis showed that one-third (from the C-terminus) of Rep is dispensable for the auto-repressor activity, while the initiator activity seems to require the whole protein.     

Open strands adjacent to iterons promote the binding of the replication initiator protein (Rep) of pSC101 to the unit sequence of the iterons in vitro

The purified dimeric form of the Rep protein, a replication initiator protein of the plasmid pSC101, has a low affinity for repeated sequences, iterons, in the replication origin of the plasmid, and higher affinities for two inverted repeats in the operator region of the rep gene resulting in its functioning as an autorepressor. Studies of binding to various synthetic DNA have established that Rep can bind to duplex iteron-sequence carrying open (non-complementary) strands at one end proximal to the rep gene. Open strands at the opposite end of the iteron have no effect on Rep-binding. One open strand seems to be required in a sequence-specific fashion. A randomly sequenced duplex DNA with the open strands cannot bind to Rep but can function as a significant competitor. This suggests that Rep has some affinity for the open strands and forms a stable complex with the adjacent iteron. The mutated Rep protein, Rep1, which causes an increase in the plasmid copy number in vivo, has equally high affinity for the iteron with the open strands as wild type Rep, though it has a lower affinity for the inverted repeats than the wild type. The Rep dimer might bind to these DNA sequences with different modes.     

Isolation and characterization of plasmid mutations that enable partitioning of pSC101 replicons lacking the partition (par) locus.

Second-site mutations that allow stable inheritance of partition-defective pSC101 plasmids mapped to seven distinct sites in the 5' half of the plasmid repA gene. While the mutations also elevated pSC101 copy number, there was no correlation between copy number increase and plasmid stability. Combinations of mutations enabled pSC101 DNA replication in the absence of integration host factor and also stabilized par-deleted plasmids in cells deficient in DNA gyrase or defective in DnaA binding. Our findings suggest that repA mutations compensate for par deletion by enabling the origin region RepA-DNA-DnaA complex to form under suboptimal conditions. They also provide evidence that this complex has a role in partitioning that is separate from its known ability to promote plasmid DNA replication.     

Negative control of plasmid pSC101 replication by increased concentrations of both initiator protein and iterons

Increased intracellular concentrations of the initiator protein Rep (or RepA) interfere with pSC101 DNA replication, and mutated Rep proteins that result in an increase in plasmid copy numbers do not inhibit the replication. A rep mutant (rep(inh)) defective in the inhibitory activity was isolated and found to be a new high copy number mutant. The inhibitory function of Rep was enhanced by the coexistence of directly repeated sequences (DR; iterons) in the replication origin region (ori), but not by the inverted repeat sequences (IR) in ori and the rep promoter. This synergistic effect of Rep and DR sequences for the replication inhibition was dependent on their intracellular concentrations. Considering that DR sequences are the specific binding sites of the Rep monomer form, the Rep monomer-DR complex might be responsible for the inhibition of the plasmid replication. Furthermore, the Rep monomer in the crude cell extracts facilitated dimerization of DR DNA fragments by DNA ligase. Neither synergistic inhibitory function with DR nor Rep mediated dimerization of DR DNA was observed in high copy number mutant Rep proteins. The role of the Rep-iteron complex in the copy number control of pSC101 is discussed.     

Mechanism of origin activation by monomers of R6K-encoded pi protein

One recurring theme in plasmid duplication is the recognition of the origin of replication (ori) by specific Rep proteins that bind to DNA sequences called iterons. For plasmid R6K, this process involves a complex interplay between monomers and dimers of the Rep protein, pi, with seven tandem iterons of gamma ori. Remarkably, both pi monomers and pi dimers can bind to iterons, a new paradigm in replication control. Dimers, the predominant form in the cell, inhibit replication, while monomers facilitate open complex formation and activate the ori. Here, we investigate a mechanism by which pi monomers out-compete pi dimers for iteron binding, and in so doing activate the ori. With an in vivo plasmid incompatibility assay, we find that pi monomers bind cooperatively to two adjacent iterons. Cooperative binding is eliminated by insertion of a half-helical turn between two iterons but is diminished only slightly by insertion of a full helical turn between two iterons. These studies show also that pi bound to a consensus site promotes occupancy of an adjacent mutated site, another hallmark of cooperative interactions. pi monomer/iteron interactions were quantified using a monomer-biased pi variant in vitro with the same collection of two-iteron constructs. The cooperativity coefficients mirror the plasmid incompatibility results for each construct tested. pi dimer/iteron interactions were quantified with a dimer-biased mutant in vitro and it was found that pi dimers bind with negligible cooperativity to two tandem iterons.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication.     

Cloning and sequence analysis of a plasmid replicon from Lactococcus lactis subsp. cremoris FG2

A replication region from one of the Lactococcus lactis subsp. cremoris FG2 plasmids was isolated by cloning of a 4.8-kb XbaI fragment into a replication probe vector and transformation into L. lactis LM0230. A 1.8-kb region within this fragment was sequenced and confirmed by PCR subcloning to encode a functional replicon in LM0230. The replicon consists of an open reading frame encoding a putative replication protein (Rep) of 386 amino acids and a non-coding region (ori) which features several structural motifs typical of other known replication origins, including a 22-bp iteron sequence tandemly repeated three and a half times, a 10-bp direct repeat and two sets of inverted repeats. The ori region could drive replication of its plasmid when supplied with the replication region in-trans. The lack of detectable single-stranded DNA during replication and the existence of extensive homology with other known lactococcal theta replicons strongly suggest that this region encodes a theta-replicating mechanism.     

Nucleotide sequence analysis of cryptic plasmid pAM5 from Acidiphilium multivorum

Plasmid pAM5 of Acidiphilium multivorum JCM-8867 has been completely sequenced by initial cloning of HindIII-PstI fragments followed by primer walking. It has a size of 5161bp and single site for several restriction enzymes as revealed by DNA sequencing. Sequence analysis predicts five putative open reading frames. ORF1 and ORF3 show significant identity with various plasmid encoded mobilization (Mob) and replication initiation (Rep) proteins, respectively. The putative Mob protein has several characteristics of the MOB(Q) family having the motifs with conserved amino acid residues. Upstream of the Mob ORF, there exists a 34bp oriT region having a nic consensus sequence. The constructed plasmid pSK1 bearing pAM5 mob region can be mobilized to Escherichia coli in presence of conjugative plasmid pRK2013. The replication module comprises of several DnaA like boxes, several perfect direct and inverted repeats, a potential prokaryotic promoter and putative rep gene. The rep module is very similar to several theta replicating iteron family plasmids, suggesting pAM5 replication to follow the same course. Any phenotypic character determinant (e.g., metal resistance, antibiotic resistance etc.) gene is absent in pAM5, suggesting this plasmid to be cryptic in nature. However, a pAM5 derivative plasmid named pSK2, containing the putative pAM5 rep region, can replicate and be stably maintained in Acidiphilium, Acidocella, and E. coli strains; it can also carry foreign DNA fragments. Thus, pSK2 could serve as a cloning shuttle vector between these bacteria. It was observed that pAM5 Rep is essential for pSK2 to replicate in acidophiles. In its natural host, A. multivorum JCM-8867, pAM5 maintains a copy number of 50-60, and its derivative pSK2 maintains a comparatively, higher copy number in E. coli than in acidophiles.     

The localized melting of mini-F origin by the combined action of the mini-F initiator protein (RepE) and HU and DnaA of Escherichia coli

 Replication of mini-F plasmids requires the initiator protein RepE, which binds specifically to four iterons within the origin (ori2), as well as some host factors that are involved in chromosomal DNA replication. To understand the role of host factors and RepE in the early steps of mini-F DNA replication, we examined the effects of RepE and the Escherichia coli proteins DnaA and HU on the localized melting of ori2 DNA in a purified in vitro system. We found that the binding of RepE to an iteron causes a 50^° bend at or around the site of binding. RepE and HU exhibited synergistic effects on the localized melting within the ori2 region, as detected by sensitivity to the single-strand specific P1 endonuclease. This opening of duplex DNA occurred around the 13mer of ori2, whose sequence closely resembles the set of 13mers found in the chromosomal origin oriC. Further addition of DnaA to the reaction mixture increased the efficiency of melting and appeared to extend melting to the adjacent AT-rich region. Moreover, DNA melting with appreciably higher efficiencies was observed with mutant forms of RepE that were previously shown to be hyperactive both in DNA binding in vitro and in initiator activity in vivo. We propose that the binding of RepE to four iterons of ori2 causes bending at the sites of RepE binding and, with the assistance of HU, induces a localized melting in the 13mer region. The addition of DnaA extends melting to the AT-rich region, which could then serve as the entry site for the DnaB-DnaC complex, much as has been documented for oriC- dependent replication. Received: 15 May 1996/Accepted: 11 July 1996     

Replication Mechanism and Sequence Analysis of the Replicon of pAW63, a Conjugative Plasmid from Bacillus thuringiensis

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.     

Multiple Origins and Replication Proteins Influence Biological Properties of β-Lactamase-Producing Plasmids from Neisseria gonorrhoeae

The beta-lactamase-producing Asia-type plasmid pJD4 of Neisseria gonorrhoeae is a 7.4-kb, broad-host-range plasmid. It is part of a family of plasmids which are structurally related yet vary in size, found in both N. gonorrhoeae and Haemophilus ducreyi. Branch-point analysis by electron microscopy indicates that pJD4 carries three clustered but distinguishable origins of replication, which we named ori1, ori2, and ori3. Although pJD4 belongs to incompatibility (Inc) group W, it also carries a silent IncFII determinant which is expressed when ori2 and ori3 are absent. The Africa-type plasmid pJD5, a naturally occurring deletion derivative of pJD4, carries only ori1, belongs to the IncFII group, and, in contrast to pJD4, requires DNA polymerase I (Pol I) for replication. Plasmids constructed from pJD4 which lack ori1 but carry ori2 and ori3 do not require Pol I and are incompatible with IncW plasmids, suggesting that the ori2 or ori3 region contains the IncW determinant. We have cloned a replication initiation protein (RepB) that is necessary for ori2 and ori3 to function. This Rep protein is distinct from RepA, which is necessary for ori1. Thus, pJD4 is unique because it is the smallest plasmid characterized containing three origins of replication and two unique Rep proteins.     

Analysis of Agrobacterium tumefaciens plasmid pTiC58 replication region with a novel high-copy-number derivative.

The origin of replication, ori, of the nopaline tumor-inducing plasmid, pTiC58, mapped in a region that shares sequence homology with octopine plasmids pTiAch5 and pTiB6. Within this region, the minimum amount of DNA necessary for maintaining autonomous replication was a 2.6-kilobase region, which also comprised the incompatibility function inc. pTiC58 derivatives containing inc were incompatible with Agrobacterium tumefaciens plasmids pTiC58, pTiD1439, pTiAch5, pTi15955, and pTiA5 and were compatible with A. rhizogenes plasmid pRi12. Situated adjacent to the origin region was a 1.5-kilobase par segment involved in stable inheritance of pTiC58 under nonselective growth conditions. When par was present, plasmid maintenance approached that of the wild-type pTiC58. Rapid loss from the cell population was observed for plasmids not containing this locus. Another 1.5-kilobase region, cop, positively regulated pTiC58 copy number, enabling certain pTiC58 derivatives to exist at a copy number up to 80 times higher than that of wild-type pTiC58. Deletions within the cop locus resulted in reduced copy number. The ori/inc regions were flanked on either side by the par and cop loci.     

DnaA boxes are important elements in setting the initiation mass of Escherichia coli

The binding of DnaA protein to its DNA binding sites-DnaA boxes-in the chromosomal oriC region is essential for initiation of chromosome replication. In this report, we show that additional DnaA boxes affect chromosome initiation control, i.e., increase the initiation mass. The cellular DnaA box concentration was increased by introducing pBR322-derived plasmids carrying DnaA boxes from the oriC region into Escherichia coli and by growing the strains at different generation times to obtain different plasmid copy numbers. In fast-growing cells, where the DnaA box plasmid copy number per oriC locus was low, the presence of extra DnaA boxes caused only a moderate increase in the initiation mass. In slowly growing cells, where the DnaA box plasmid copy number per oriC locus was higher, we observed more pronounced increases in the initiation mass. Our data clearly show that the presence of extra DnaA boxes increases the initiation mass, supporting the idea that the initiation mass is determined by the normal complement of DnaA protein binding sites in E. coli cells.     

Separate roles of Escherichia coli replication proteins in synthesis and partitioning of pSC101 plasmid DNA

We report here that the Escherichia coli replication proteins DnaA, which is required to initiate replication of both the chromosome and plasmid pSC101, and DnaB, the helicase that unwinds strands during DNA replication, have effects on plasmid partitioning that are distinct from their functions in promoting plasmid DNA replication. Temperature-sensitive dnaB mutants cultured under conditions permissive for DNA replication failed to partition plasmids normally, and when cultured under conditions that prevent replication, they showed loss of the entire multicopy pool of plasmid replicons from half of the bacterial population during a single cell division. As was observed previously for DnaA, overexpression of the wild-type DnaB protein conversely stabilized the inheritance of partition-defective plasmids while not increasing plasmid copy number. The identification of dnaA mutations that selectively affected either replication or partitioning further demonstrated the separate roles of DnaA in these functions. The partition-related actions of DnaA were localized to a domain (the cell membrane binding domain) that is physically separate from the DnaA domain that interacts with other host replication proteins. Our results identify bacterial replication proteins that participate in partitioning of the pSC101 plasmid and provide evidence that these proteins mediate plasmid partitioning independently of their role in DNA synthesis.     

IncP-9 replication initiator protein binds to multiple DNA sequences in oriV and recruits host DnaA protein

The minimal replicon from IncP-9 plasmid pM3, consisting of oriV and rep, is able to replicate in Pseudomonas putida but not in Escherichia coli, unless production of Rep protein is increased. The Rep protein, at 20kDa, is the smallest replication protein so far identified for a theta replicating plasmid. Rep was purified and shown to bind in three blocks across the oriV region that do not correlate with a single unique binding sequence. The block closest to rep is not necessary for oriV function. Rep forms at least two types of complex--one rendering the DNA entirely resistant to cleavage, the other occupying one side of the helix. No short segment of oriV showed the same affinity for Rep as the whole of oriV. The oriV region did not bind purified DnaA from E. coli, P. putida or P. aeruginosa but when Rep was present also, super-shifts were found with DnaA in a sequence-specific manner. Scrambling of the primary candidate DnaA box did not inactivate oriV but did increase the level of Rep required to activate oriV. The general pattern of Rep-DNA recognition sequences in oriV indicates that the IncP-9 system falls outside of the paradigms of model plasmids that have been well-studied to date.