ArgR and PepA, accessory proteins for XerCD-mediated resolution of ColE1 dimers, are also required for stable maintenance of the P1 prophage

Dimers of low copy number plasmids must be resolved to monomers to prevent interference with active partition. For the P1 prophage this is achieved by the Cre site-specific recombinase acting at lox. Multimerisation of multicopy plasmids threatens stability via copy number depression, and multimers of ColE1 are resolved by XerCD-mediated recombination at cer. Xer-cer is constrained to multimer resolution by accessory proteins ArgR and PepA. Recently, it has been shown that ArgR and PepA influence Cre-mediated recombination at a cer-lox hybrid site in vitro, defining the structure of the synaptic complex. We show here that both ArgR and PepA are required for stable maintenance of the P1 prophage. It is extremely difficult to establish P1 in a strain lacking PepA and the prophage was lost rapidly once selection was removed. ArgR plays a less crucial role although its absence significantly increased prophage loss. The effect of the accessory proteins is seen only at physiological concentrations of Cre; when the recombinase is expressed from a multicopy plasmid, the prophage is unstable even in the presence of ArgR and PepA. We propose that ArgR and PepA are involved in Cre-lox recombination in vivo, probably by constraining the system to resolution of prophage dimers.     

Nucleoprotein architecture and ColE1 dimer resolution: a hypothesis

Dimers of plasmid ColE1 are converted to monomers by site-specific recombination, a process that requires 240 bp of DNA ( cer ) and four host-encoded proteins (XerC, XerD, ArgR and PepA). Here, we propose structures for nucleoprotein complexes involved in cer –Xer recombination based upon existing knowledge of the structures of component proteins and computational analyses of protein structure and DNA curvature. We propose that, in the nucleoprotein complex at a single cer site, a PepA hexamer acts as an adaptor, connecting the heterodimeric recombinase (XerCD) to an ArgR hexamer. This provides a protein core around which the cer site wraps, its exact path being defined by strong sequence-specific interactions with ArgR and XerCD, weak interactions with PepA and sequence-dependent flexibility of cer . The initial association of single-site complexes (pairing) is proposed to occur via an ArgR–PepA interaction. Pairing between sites in a plasmid dimer is stabilized by DNA supercoiling and is followed by a structural isomerization to form a recombination-proficient synaptic complex. We propose that paired structures formed between sites in trans are too short-lived to permit synaptic complex formation. There is thus an energetic barrier to inappropriate recombination reactions. Our proposals are consistent with a wide range of experimental observations.     

Direct interaction of aminopeptidase A with recombination site DNA in Xer site-specific recombination.

Xer site-specific recombination at ColE1 cer converts plasmid multimers into monomers, thus ensuring the heritable stability of ColE1. Two related recombinase proteins, XerC and XerD, catalyse the strand exchange reaction at a 30 bp recombination core site. In addition, two accessory proteins, PepA and ArgR, are required for recombination at cer. These two accessory proteins are thought to act at 180 bp of accessory sequences adjacent to the cer recombination core to ensure that recombination only occurs between directly repeated sites on the same molecule. Here, we demonstrate that PepA and ArgR interact directly with cer, forming a complex in which the accessory sequences of two cer sites are interwrapped approximately three times in a right-handed fashion. We present a model for this synaptic complex, and propose that strand exchange can only occur after the formation of this complex.     

Control of Cre recombination by regulatory elements from Xer recombination systems

Site-specific recombination by the Cre recombinase takes place at a simple DNA site (loxP), requires no additional proteins and gives topologically simple recombination products. In contrast, cer and psi sites for Xer recombination contain approximately 150 bp of accessory sequences, require accessory proteins PepA, ArgR and ArcA, and the products are specifically linked to form a four-noded catenane. Here, we use hybrid sites consisting of accessory sequences of cer or psi fused to loxP to probe the function of accessory proteins in site-specific recombination. We show that PepA instructs Cre to produce four-noded catenane, but is not required for recombination at these hybrid sites. Mutants of Cre that require PepA and accessory sequences for efficient recombination were selected. PepA-dependent Cre gave products with a specific topology and displayed resolution selectivity. Our results reveal that PepA acts autonomously in the synapsis of psi and cer accessory sequences and is the main architectural element responsible for intertwining accessory site DNA. We suggest that accessory proteins can activate recombinases simply by synapsing the regulatory DNA sequences, thus bringing the recombination sites together with a specific geometry. This may occur without the need for protein-protein interactions between accessory proteins and the recombinases.     

PepA and ArgR do not regulate Cre recombination at the bacteriophage P1 loxP site

In the lysogenic state, bacteriophage P1 is maintained as a low copy-number circular plasmid. Site-specific recombination at loxP by the phage-encoded Cre protein keeps P1 monomeric, thus helping to ensure stable plasmid inheritance. Two Escherichia coli DNA-binding proteins, PepA and ArgR, were recently reported to be necessary for maintenance or establishment of P1 lysogeny. PepA and ArgR bind to regulatory DNA sequences upstream of the ColE1 cer recombination site to regulate site-specific recombination by the XerCD recombinases. This recombination keeps ColE1 in a monomeric state and helps to ensure stable plasmid maintenance. It has been suggested that ArgR and PepA play a similar role in P1 maintenance, regulating Cre recombination by binding to DNA sequences upstream of loxP. Here, we show that ArgR does not bind to its proposed binding site upstream of loxP, and that Cre recombination at loxP in its natural P1 context is not affected by PepA and ArgR in vitro. When sequences upstream of loxP were mutated to allow ArgR binding, PepA and ArgR still had no effect on Cre recombination. Our results demonstrate that PepA requires specific DNA sequences for binding, and that PepA and ArgR have no direct role in Cre recombination at P1 loxP.     

The ArcA/ArcB two-component regulatory system of Escherichia coli is essential for Xer site-specific recombination at psi

Two recombinases, XerC and XerD, act at the recombination sites psi and cer in plasmids pSC101 and ColE1 respectively. Recombination at these sites maintains the plasmids in a monomeric state and helps to promote stable plasmid inheritance. The accessory protein PepA acts at both psi and cer to ensure that only intramolecular recombination takes place. An additional accessory protein, ArgR, is required for recombination at cer but not at psi . Here, we demonstrate that the ArcA/ArcB two-component regulatory system of Escherichia coli , which mediates adaptation to anaerobic growth conditions, is required for efficient recombination in vivo at psi . Phosphorylated ArcA binds to psi in vitro and increases the efficiency of recombination at this site. Binding of ArcA to psi may contribute to the formation of a higher order synaptic complex between a pair of psi sites, thus helping to ensure that recombination is intramolecular.     

Peptidase activity of Escherichia coli aminopeptidase A is not required for its role in Xer site-specific recombination

Xer site-specific recombination is required for the stable inheritance of multicopy plasmids and the normal segregation of the bacterial chromosome in Escherichia coli.Two related recombinases and two accessory proteins are essential for Xer-mediated recombination at cer, a recombination site in the plasmid ColE1 The accessory proteins, ArgR and PepA, function in ensuring that the Xer recombination reaction acts exclusively intramolecularly, converting plasmid dimers into monomers and not vice versa. PepA is an amino-exopeptidase, but its molecular role in the Xer recombination mechanism is unclear. Here we show that a mutation directed at the presumptive active site of PepA creates a protein with no detectable peptidase activity in vitro or in vivo, but which still functions normality in Xer site-specific recombination at cer.     

Xer-mediated site-specific recombination in vitro.

The Xer site-specific recombination system acts at ColE1 cer and pSC101 psi sites to ensure that these plasmids are in a monomeric state prior to cell division. We show that four proteins, ArgR, PepA, XerC and XerD are necessary and sufficient for recombination between directly repeated cer sites on a supercoiled plasmid in vitro. Only PepA, XerC and XerD are required for recombination at psi in vitro. Recombination at cer and psi in vitro requires negative supercoiling and is exclusively intramolecular. Strand exchange at cer produces Holliday junction-containing products in which only the top strands have been exchanged. This reaction requires the catalytic tyrosine residue of Xer C but not that of XerD. Recombination at psi gives catenated circular resolution products. Strand exchange at psi is sequential. XerC catalyses the first (top) strand exchange to make a Holiday junction intermediate and XerD catalyses the second (bottom) strand exchange.     

Xer-mediated site-specific recombination at cer generates Holliday junctions in vivo.

Normal segregation of the Escherichia coli chromosome and stable inheritance of multicopy plasmids such as ColE1 requires the Xer site-specific recombination system. Two putative lambda integrase family recombinases, XerC and XerD, participate in the recombination reactions. We have constructed an E. coli strain in which the expression of xerC can be tightly regulated, thereby allowing the analysis of controlled recombination reactions in vivo. Xer-mediated recombination in this strain generates Holliday junction-containing DNA molecules in which a specific pair of strands has been exchanged in addition to complete recombinant products. This suggests that Xer site-specific recombination utilizes a strand exchange mechanism similar or identical to that of other members of the lambda integrase family of recombination systems. The controlled in vivo recombination reaction at cer requires recombinase and two accessory proteins, ArgR and PepA. Generation of Holliday junctions and recombinant products is equally efficient in RuvC- and RuvC+ cells, and in cells containing a multicopy RuvC+ plasmid. Controlled XerC expression is also used to analyse the efficiency of recombination between variant cer sites containing sequence alterations and heterologies within their central regions.     

Communication between accessory factors and the Cre recombinase at hybrid psi-loxP sites

By placing loxP adjacent to the accessory sequences from the Xer/psi multimer resolution system, we have imposed topological selectivity and specificity on Cre/loxP recombination. In this hybrid recombination system, the Xer accessory protein PepA binds to psi accessory sequences, interwraps them, and brings the loxP sites together such that the product of recombination is a four-node catenane. Here, we investigate communication between PepA and Cre by varying the distance between loxP and the accessory sequences, and by altering the orientation of loxP. The yield of four-node catenane and the efficiency of recombination in the presence of PepA varied with the helical phase of loxP with respect to the accessory sequences. When the orientation of loxP was reversed, or when half a helical turn was added between the accessory sequences and loxP, PepA reversed the preferred order of strand exchange by Cre at loxP. The results imply that PepA and the accessory sequences define precisely the geometry of the synapse formed by the loxP sites, and that this overcomes the innate preference of Cre to initiate recombination on the bottom strand of loxP. Further analysis of our results demonstrates that PepA can stimulate strand exchange by Cre in two distinct synaptic complexes, with the C-terminal domains of Cre facing either towards or away from PepA. Thus, no specific PepA-recombinase interaction is required, and correct juxtaposition of the loxP sites is sufficient to activate Cre in this system.     

Resolution of ColE1 dimers requires a DNA sequence implicated in the three-dimensional organization of the cer site.

Plasmid ColE1 specifies a recombination site (cer) which participates in the conversion of plasmid dimers to monomers. The uncontrolled accumulation of dimers (and higher oligomeric forms) would otherwise lead to plasmid instability. Exonuclease III-generated deletions have been used to define the left-hand boundary of the cer site. Deletions which have lost up to 60 bp adjacent to the boundary no longer mediate the conversion of plasmid dimers to monomers, but still recombine with a wild-type site. Although this boundary region is essential for dimer resolution, its DNA sequence is poorly conserved among multimer resolution sites in related plasmids. We present evidence that its function is to influence the three-dimensional organization of the site and suggest that it may be required for the formation of a condensed nucleoprotein complex.     

Activating mutations of Tn3 resolvase marking interfaces important in recombination catalysis and its regulation

Catalysis of DNA recombination by Tn3 resolvase is conditional on prior formation of a synapse, comprising 12 resolvase subunits and two recombination sites (res). Each res binds a resolvase dimer at site I, where strand exchange takes place, and additional dimers at two adjacent 'accessory' binding sites II and III. 'Hyperactive' resolvase mutants, that catalyse strand exchange at site I without accessory sites, were selected in E. coli. Some single mutants can resolve a res x site I plasmid (that is, with one res and one site I), but two or more activating mutations are necessary for efficient resolution of a site I x site I plasmid. Site I x site I resolution by hyperactive mutants can be further stimulated by mutations at the crystallographic 2-3' interface that abolish activity of wild-type resolvase. Activating mutations may allow regulatory mechanisms of the wild-type system to be bypassed, by stabilizing or destabilizing interfaces within and between subunits in the synapse. The positions and characteristics of the mutations support a mechanism for strand exchange by serine recombinases in which the DNA is on the outside of a recombinase tetramer, and the tertiary/quaternary structure of the tetramer is reconfigured.     

DNA binding of Escherichia coli arginine repressor mutants altered in oligomeric state

The Escherichia coli arginine repressor (ArgR) controls expression of the arginine biosynthetic genes and acts as an accessory protein in Xer site-specific recombination at cer and related plasmid recombination sites. The hexameric wild-type protein shows L -arginine-dependent DNA binding. In this work, ArgR mutants that are defective in trimer–trimer interactions and bind DNA as trimers in an L -arginine-independent manner are isolated and characterized. Whereas the wild-type ArgR hexamer exhibits high-affinity binding to two repeated ARG boxes separated by 3 bp (each ARG box containing two identical dyad symmetrical 9 bp half-sites), the trimeric mutants bind to and footprint three adjacent half-sites of this 'idealized' substrate. Trimeric ArgR is impaired in its ability to repress the arginine biosynthetic genes and in Xer site-specific recombination. In the absence of L -arginine, residual wild-type ArgR-binding occurs as trimers. The binding of an N-terminal 77-amino-acid DNA-binding domain to idealized ARG boxes is also characterized.     

Analysis of the terminus region of the Caulobacter crescentus chromosome and identification of the dif site

The terminus region of the Caulobacter crescentus chromosome and the dif chromosome dimer resolution site were characterized. The Caulobacter genome contains skewed sequences that abruptly switch strands at dif and may have roles in chromosome maintenance and segregation. Absence of dif or the XerCD recombinase results in a chromosome segregation defect. The Caulobacter terminus region is unusual, since it contains many essential or highly expressed genes.     

Differences in resolution of mwr-containing plasmid dimers mediated by the Klebsiella pneumoniae and Escherichia coli XerC recombinases: potential implications in dissemination of antibiotic resistance genes

Xer-mediated dimer resolution at the mwr site of the multiresistance plasmid pJHCMW1 is osmoregulated in Escherichia coli containing either the Escherichia coli Xer recombination machinery or Xer recombination elements from K. pneumoniae. In the presence of K. pneumoniae XerC (XerC(Kp)), the efficiency of recombination is lower than that in the presence of the E. coli XerC (XerC(Ec)) and the level of dimer resolution is insufficient to stabilize the plasmid, even at low osmolarity. This lower efficiency of recombination at mwr is observed in the presence of E. coli or K. pneumoniae XerD proteins. Mutagenesis experiments identified a region near the N terminus of XerC(Kp) responsible for the lower level of recombination catalyzed by XerC(Kp) at mwr. This region encompasses the second half of the predicted alpha-helix B and the beginning of the predicted alpha-helix C. The efficiencies of recombination at other sites such as dif or cer in the presence of XerC(Kp) or XerC(Ec) are comparable. Therefore, XerC(Kp) is an active recombinase whose action is impaired on the mwr recombination site. This characteristic may result in restriction of the host range of plasmids carrying this site, a phenomenon that may have important implications in the dissemination of antibiotic resistance genes.     

The single-stranded genome of phage CTX is the form used for integration into the genome of Vibrio cholerae

A major determinant of Vibrio cholerae pathogenicity, the cholera enterotoxin, is encoded in the genome of an integrated phage, CTXvarphi. CTXvarphi integration depends on two host-encoded tyrosine recombinases, XerC and XerD. It occurs at dif1, a 28 bp site on V. cholerae chromosome 1 normally used by XerCD for chromosome dimer resolution. The replicative form of the phage contains two pairs of binding sites for XerC and XerD in inverted orientations. Here we show that in the single-stranded genome of the phage, these sites fold into a hairpin structure, which creates a recombination target for XerCD. In the presence of XerD, XerC can catalyze a single pair of strand exchanges between this target and dif1, resulting in integration of the phage. This integration strategy explains why the rules that normally apply to tyrosine recombinase reactions seemed not to apply to CTXvarphi integration and, in particular, why integration is irreversible.