Rapid extraction of plasmids from Clostridium perfringens

Two rapid methods were evaluated for their extraction of plasmids from Clostridium perfringens. The first method involved lysis of 1 to 2 ml of C. perfringens culture by treatment with hyaluronidase, lysozyme, and sarcosyl. DNA, extracted with phenol-chloroform, was treated with RNase, boiled, and electrophoresed in a 1.2% agarose gel. The second method involved lysis of 2 ml of culture by lysozyme treatment and extraction with alkaline sodium dodecyl sulfate (SDS). Extracted DNA was treated with RNase, boiled, and electrophoresed in a 0.7% agarose gel. Of 57 strains of C. perfringens analyzed by both extraction procedures, 11 were shown to have plasmids by the alkaline SDS method which were missed by the phenol-chloroform extraction method. These new plasmids were of higher molecular mass and ranged up to 68 megadaltons. Use of the DNase inhibitor diethyl pyrocarbonate did not further improve the yield of plasmid DNA. An additional 159 isolates of C. perfringens screened by the alkaline SDS method revealed plasmids up to 80 megadaltons in mass and an overall plasmid carriage rate of 69%.     

Improved lysis of group N streptococci for isolation and rapid characterization of plasmid deoxyribonucleic acid.

Procedures for effective cellular lysis and plasmid deoxyribonucleic acid (DNA) isolation from group N streptococci were developed. Cells were grown at 32 degrees C for 4 h in a modified Elliker broth containing 20 mM DL-threonine. After cellular digestion with 2 mg of lysozyme per ml for 7 min at 37 degrees C, 1% sodium dodecyl sulfate exposure resulted in complete and immediate lysis. Lactose (Lac) plasmid species in Streptococcus lactis C2 and S. cremoris B1 (30 and 37 megadaltons, respectively) were demonstrated upon examination of DNA from the cleared lysates by agarose gel electrophoresis. Increasing the lysozyme treatment to 20 min or more resulted in loss of the Lac plasmid, whereas other resident plasmids were unaffected and demonstrable in agarose gels. Diethylpyrocarbonate added before lysis prevented Lac plasmid loss in 20-min lysozyme-treated cells, but was not effective after 40 min of lysozyme treatment. The results suggested that endogenous nuclease activity during the lysozyme treatment period initiated Lac plasmid DNA loss. The development of an efficient lysis procedure for the group N streptococci allowed rapid identification and characterization of plasmid DNA by agarose gel electrophoresis. The plasmid composition of S. lactis C2 and S. cremoris B1, as determined by agarose gel electrophoresis, compared favorably to previous electron microscopic observations.     

Improved lysis of group N streptococci for isolation and rapid characterization of plasmid deoxyribonucleic acid.

Procedures for effective cellular lysis and plasmid deoxyribonucleic acid (DNA) isolation from group N streptococci were developed. Cells were grown at 32 degrees C for 4 h in a modified Elliker broth containing 20 mM DL-threonine. After cellular digestion with 2 mg of lysozyme per ml for 7 min at 37 degrees C, 1% sodium dodecyl sulfate exposure resulted in complete and immediate lysis. Lactose (Lac) plasmid species in Streptococcus lactis C2 and S. cremoris B1 (30 and 37 megadaltons, respectively) were demonstrated upon examination of DNA from the cleared lysates by agarose gel electrophoresis. Increasing the lysozyme treatment to 20 min or more resulted in loss of the Lac plasmid, whereas other resident plasmids were unaffected and demonstrable in agarose gels. Diethylpyrocarbonate added before lysis prevented Lac plasmid loss in 20-min lysozyme-treated cells, but was not effective after 40 min of lysozyme treatment. The results suggested that endogenous nuclease activity during the lysozyme treatment period initiated Lac plasmid DNA loss. The development of an efficient lysis procedure for the group N streptococci allowed rapid identification and characterization of plasmid DNA by agarose gel electrophoresis. The plasmid composition of S. lactis C2 and S. cremoris B1, as determined by agarose gel electrophoresis, compared favorably to previous electron microscopic observations.     

Role of DNase in recovery of plasmid DNA from Clostridium perfringens

Recovery of plasmid DNA from Clostridium perfringens 10543A and 3626B cleared lysates was significantly improved by the addition of 0.2% (vol/vol) diethylpyrocarbonate (DEP) before protoplast disruption in the cleared lysate protocol. Three previously undetected, large-molecular-mass plasmids (45.2, 51.9, and 68.2 megadaltons) were isolated from modified DEP-treated cleared lysates of C. perfringens 3626B. Two plasmids (9.4 and 30 megadaltons) were recovered from C. perfringens 10543A modified DEP-treated cleared lysates which previously required dye-buoyant density gradient centrifugation for visualization on agarose gels. Unsuccessful attempts to isolate plasmid DNA from Brij 58 cleared lysates of extracellular DNase-negative mutants of C. perfringens suggested the deleterious DNase activity was not extracellular. Cellular localization studies indicated that the cell wall-compartmentalized cell fraction contained 72.2% of the total DNase activity, whereas the extracellular and intracellular fractions demonstrated much less (26.8 and 1.0%, respectively). Cleared lysates prepared with DEP demonstrated much less DNase activity than cleared lysates prepared without DEP. The variable and irreproducible recovery of plasmid DNA from C. perfringens cleared lysates was attributed to cell wall-compartmentalized DNase.     

Role of DNase in recovery of plasmid DNA from Clostridium perfringens.

Recovery of plasmid DNA from Clostridium perfringens 10543A and 3626B cleared lysates was significantly improved by the addition of 0.2% (vol/vol) diethylpyrocarbonate (DEP) before protoplast disruption in the cleared lysate protocol. Three previously undetected, large-molecular-mass plasmids (45.2, 51.9, and 68.2 megadaltons) were isolated from modified DEP-treated cleared lysates of C. perfringens 3626B. Two plasmids (9.4 and 30 megadaltons) were recovered from C. perfringens 10543A modified DEP-treated cleared lysates which previously required dye-buoyant density gradient centrifugation for visualization on agarose gels. Unsuccessful attempts to isolate plasmid DNA from Brij 58 cleared lysates of extracellular DNase-negative mutants of C. perfringens suggested the deleterious DNase activity was not extracellular. Cellular localization studies indicated that the cell wall-compartmentalized cell fraction contained 72.2% of the total DNase activity, whereas the extracellular and intracellular fractions demonstrated much less (26.8 and 1.0%, respectively). Cleared lysates prepared with DEP demonstrated much less DNase activity than cleared lysates prepared without DEP. The variable and irreproducible recovery of plasmid DNA from C. perfringens cleared lysates was attributed to cell wall-compartmentalized DNase.     

可用于微生物群落分子生态学研究的活性污泥总DNA提取方法研究

活性污泥样品经液氮速冻、沸水浴融化、溶菌酶处理和 SDS裂解后 ,99%以上细胞裂解。所提取的 DNA经琼脂糖凝胶电泳检测和荧光法浓度测定 ,其片断大小在 2 0 kb左右 ,产量可达 1 .75 6± 0 .1 mg/g MLSS。样品 ABS2 6 0 nm/ABS2 80 nm的比值为 1 .96± 0 .2。以提取的总 DNA为模板 ,进行细菌核糖体小亚基 1 6Sr DNA基因 V3区和多组分苯酚羟化酶大亚基基因 (Lm PHs)的 PCR扩增 ,均获得成功 ,为活性污泥中微生物群落的分子生态学研究提供了一种简便、可靠的 DNA提取方法。     

Production of toxin by Clostridium botulinum type A strains cured by plasmids.

Twelve strains of Clostridium botulinum type A and seven strains of Clostridium sporogenes were screened for plasmids by agarose gel electrophoresis of cleared lysates of cells from 5 ml of mid-log-phase culture. Nine type A strains had one or more plasmids of 4.3, 6.8, or 36 megadaltons (MDa); several strains showed a large plasmid of 61 MDa, but it was not consistently recovered. Four C. sporogenes strains had one or more plasmids of 4.3, 5.6 or 36 MDa. Isolates obtained from cultures of plasmid-containing C. botulinum type A strains grown in ionic detergent broth and from spontaneously arising variants were screened both for toxin production and for plasmid content. Toxigenicity of C. botulinum could not be correlated with the presence of any one plasmid.     

Production of toxin by Clostridium botulinum type A strains cured by plasmids

Twelve strains of Clostridium botulinum type A and seven strains of Clostridium sporogenes were screened for plasmids by agarose gel electrophoresis of cleared lysates of cells from 5 ml of mid-log-phase culture. Nine type A strains had one or more plasmids of 4.3, 6.8, or 36 megadaltons (MDa); several strains showed a large plasmid of 61 MDa, but it was not consistently recovered. Four C. sporogenes strains had one or more plasmids of 4.3, 5.6 or 36 MDa. Isolates obtained from cultures of plasmid-containing C. botulinum type A strains grown in ionic detergent broth and from spontaneously arising variants were screened both for toxin production and for plasmid content. Toxigenicity of C. botulinum could not be correlated with the presence of any one plasmid.     

Rapid procedure for detection and isolation of large and small plasmids.

Procedures are described for the detection and isolation of plasmids of various sizes (2.6 to 350 megadaltons) that are harbored in species of Agrobacterium, Rhizobium, Escherichia, Salmonella, Erwinia, Pseudomonas, and Xanthomonas. The method utilized the molecular characteristics of covalently closed circular deoxyribonucleic acid (DNA) that is released from cells under conditions that denature chromosomal DNA by using alkaline sodium dodecyl sulfate (pH 12.6) at elevated temperatures. Proteins and cell debris were removed by extraction with phenol-chloroform. Under these conditions chromosomal DNA concentrations were reduced or eliminated. The clarified extract was used directly for electrophoretic analysis. These procedures also permitted the selective isolation of plasmid DNA that can be used directly in nick translation, restriction endonuclease analysis, transformation, and DNA cloning experiments.     

Distribution of bacterial plasmids in clean and polluted sites in a South Wales river.

We isolated 400 aerobic heterotrophic bacteria from the sediment of unpolluted and polluted sites in a fast-flowing south Wales river. Isolates were subjected to taxonomic tests and screened for the presence of plasmid DNA by alkaline lysis and agarose gel techniques. There were no significant differences between sites in either the total percentage of isolates containing plasmids (unpolluted site, 9.4%; polluted site, 15%) or in the percentage of non-Pseudomonas-like isolates containing plasmids (unpolluted site, 15%; polluted site, 10%). There were significantly more Pseudomonas-like isolates with plasmids at the polluted site than at the unpolluted site (unpolluted site, 7%; polluted site, 18%). This presumably reflected a response of the nutritionally versatile Pseudomonas-like isolates to conditions at that site. The majority (86%) of the plasmids detected had molecular masses between 35 and 312 megadaltons. These plasmids were large enough to carry genes for conjugal transfer, suggesting the possibility of such transfer in this environment.     

Purification of plasmid DNA by tangential flow filtration

A simple, scalable method for purification of plasmid DNA is described. The method includes modification of the classical alkaline-lysis-based plasmid extraction method by extending the solubilization step from less than 30 min to 24 h. The extraction is followed by the novel use of tangential flow filtration (TFF) for purification of the remaining contaminants. The method does not include the use of any organic solvents, RNase, high-speed centrifugation, or column chromatography steps. The method typically yields 15 to 20 mg of plasmid DNA per liter of bacterial culture and results in removal of >99% of RNA and >95% of the protein that remains after the modified alkaline lysis procedure. The procedure has been demonstrated to be effective in the isolation of seven different plasmids. Plasmids isolated using this method had comparable transfection capability relative to plasmid isolated using a classical, cesium chloride gradient-based method.     

临床标本细菌基因组DNA提取方法探讨

目的优化细菌基因组DNA提取方法,使其适合临床细菌分子生物学检测需要。方法分别采用专用DNA提取液法、热裂解法、溶菌酶法、热裂解法与碱性裂解法组合改良法,对纯培养细菌和临床标本中细菌基因组DNA进行提取。结果专用DNA提取液法、溶菌酶法提取成功率为100%,热裂解法革兰阳性菌提取成功率为0%,革兰阴性菌成功率为100%,碱性裂解液法在NaOH浓度大于4 mmol时提取成功,临床标本在NaOH溶液超过20 mmol/L并含2%SDS时细菌基因组DNA的提取成功率为100%。结论热裂解法与碱性裂解法组合改良法提取细菌基因组DNA方便快速、简单实用,适用临床标本检测。     

侧孢芽孢杆菌质粒提取方法的探究

以能够降解有机磷农药的两株侧孢芽孢杆菌BL-21和BL-22为研究对象,分别采用碱裂解法、试剂盒提取法和SDS法对侧孢芽孢杆菌BL-21和BL-22的质粒进行提取,并通过凝胶电泳和紫外分光光度法对提取结果进行分析,试验结果证明,适合侧孢芽孢杆菌BL-21和BL-22的质粒提取方法是SDS裂解法,该方法提取的质粒大小为10kb,且该方法提取的结果稳定,质粒的产量和质量均符合分子生物学实验的要求。     

Plasmid detection in a bacteriocinogenic strain of Clostridium perfringens

Bacteriocinogenic Clostridium perfringens, strain 28, harboured plasmid DNA detectable by dye-bouyant density-gradient centrifugation. This plasmid DNA was absent from an ultraviolet light cured variant which had simultaneously lost its immunity and ability to produce bacteriocin. Agarose gel electrophoresis of the plasmid DNA revealed at least six bands but denaturation experiments suggested three plasmids occurring in more than one conformation. Electron microscopy revealed three major size distributions of circular DNA of molecular weights 1,5,6, and 7.1 megadaltons. Some evidence suggests that the 5.6 megadalton plasmid may control bacteriocin 28 production.     

Rapid procedure for isolation and detection of Salmonella plasmids

A rapid procedure is described for the isolation of high quality and quantity plasmid DNA from Salmonella. Plasmids of molecular mass ranging from 10 kbp to 147 kbp were isolated. The method yielded enough DNA from the low copy number virulence plasmids of various Salmonella serovars for visualization on an agarose gel. The method is based on the classic alkaline lysis methods, employing the same reagents, but without any incubation steps. Isolation of plasmid DNA was also attempted with the use of rapid DNA isolation kits, but without success. It was reasoned that endonucleases, present in the resin, might have degraded the plasmids. © Rapid Science Ltd. 1998     

三种提取乳酸菌中内源性质粒DNA方法的比较

采用3种不同抽提质粒DNA的方法普查了6株不同乳酸菌的内源性质粒DNA,并对3种不同方法进行比较。在相同条件下,琼脂糖凝胶电泳检测的结果显示:效果最佳者为改进的Anderson-Mckay方法,其次为液氮反复冻融方法,最差者为改进的碱裂解方法。为抽提革兰阳性细菌乳酸菌类的内源性质粒DNA提供了行之有效的方法。     

Evaluation and optimization of DNA extraction and purification procedures for soil and sediment samples.

We compared and statistically evaluated the effectiveness of nine DNA extraction procedures by using frozen and dried samples of two silt loam soils and a silt loam wetland sediment with different organic matter contents. The effects of different chemical extractants (sodium dodecyl sulfate [SDS], chloroform, phenol, Chelex 100, and guanadinium isothiocyanate), different physical disruption methods (bead mill homogenization and freeze-thaw lysis), and lysozyme digestion were evaluated based on the yield and molecular size of the recovered DNA. Pairwise comparisons of the nine extraction procedures revealed that bead mill homogenization with SDS combined with either chloroform or phenol optimized both the amount of DNA extracted and the molecular size of the DNA (maximum size, 16 to 20 kb). Neither lysozyme digestion before SDS treatment nor guanidine isothiocyanate treatment nor addition of Chelex 100 resin improved the DNA yields. Bead mill homogenization in a lysis mixture containing chloroform, SDS, NaCl, and phosphate-Tris buffer (pH 8) was found to be the best physical lysis technique when DNA yield and cell lysis efficiency were used as criteria. The bead mill homogenization conditions were also optimized for speed and duration with two different homogenizers. Recovery of high-molecular-weight DNA was greatest when we used lower speeds and shorter times (30 to 120 s). We evaluated four different DNA purification methods (silica-based DNA binding, agarose gel electrophoresis, ammonium acetate precipitation, and Sephadex G-200 gel filtration) for DNA recovery and removal of PCR inhibitors from crude extracts. Sephadex G-200 spin column purification was found to be the best method for removing PCR-inhibiting substances while minimizing DNA loss during purification. Our results indicate that for these types of samples, optimum DNA recovery requires brief, low-speed bead mill homogenization in the presence of a phosphate-buffered SDS-chloroform mixture, followed by Sephadex G-200 column purification.     

Use of a 'Miniprep' for rapid extraction of plasmids from vancomycin- and gentamicin-resistant Enterococcus faecium

Conventional methods of plasmid extraction are largely unsuited to diagnostic laboratories. The 'Miniprep' is a rapid method that utilises a centrifugable column to separate plasmid DNA from chromosomal DNA. We have modified this technique to extract plasmid DNA from seven strains of vancomycin- and gentamicin-resistant Enterococcus faecium (VGREF): 1% mannitol was added to the growth medium and cell lysis was achieved by incubation in 10 mg of lysozyme/ml in 10 mM Tris, 1 mM EDTA and 25% sucrose at pH 8.0. RNase A was added to plasmid eluate rather than at the lytic step. In comparison to a standard phenol/chloroform method, Miniprep completely eliminated chromosomal interference in gel electrophoresis but otherwise produced identical plasmid profiles. Plasmids obtained from the VGREF ranged from 42 to 1.3 Md. Band densities on a single elution from the Miniprep varied from 8.3 to 106.3 relative units. Double elution increased band densities from the same preparation from 30.4 to 196 relative units; mean percentage increases per track between 7.0 and 34.6%. This method is suitable to achieve plasmid DNA extraction from VGREF within 1 h, making the process more suitable for diagnostic laboratories.     

Characterization of a plasmid in isolates of Corynebacterium sepedonicum

Lysis of mid-log phase cells of the Gram-positive bacterium, Corynebacterium sepedonicum, by a combination of lysozyme treatment and incubation with alkaline sodium dodecyl sulfate at 56 degrees C led to the recovery of a single plasmid. The plasmid was purified in CsCl density gradients, and its molecular weight estimated to be 31 megadaltons (46 kilobases), as determined from its relative mobility in agarose gels, from its contour dimensions in electron micrographs, and from the size of the fragments generated when it was cleaved with various restriction endonucleases. Thirteen widely divergent isolates of C. sepedonicum were screened for the presence of plasmid, and of these, 11 were shown to harbour a single plasmid at a level of about 30 copies per cell. Cleavage of the plasmid with PstI gave an identical banding pattern in agarose gels for the fragments from all of the plasmid-carrying isolates. The relevance of plasmid incidence and distribution in C. sepedonicum is discussed in relation to the possibility of developing a test for the detection of bacterial ring rot by using plasmid DNA as a hybridization probe.     

Evaluation and Optimization of DNA Extraction and Purification Procedures for Soil and Sediment Samples

We compared and statistically evaluated the effectiveness of nine DNA extraction procedures by using frozen and dried samples of two silt loam soils and a silt loam wetland sediment with different organic matter contents. The effects of different chemical extractants (sodium dodecyl sulfate [SDS], chloroform, phenol, Chelex 100, and guanadinium isothiocyanate), different physical disruption methods (bead mill homogenization and freeze-thaw lysis), and lysozyme digestion were evaluated based on the yield and molecular size of the recovered DNA. Pairwise comparisons of the nine extraction procedures revealed that bead mill homogenization with SDS combined with either chloroform or phenol optimized both the amount of DNA extracted and the molecular size of the DNA (maximum size, 16 to 20 kb). Neither lysozyme digestion before SDS treatment nor guanidine isothiocyanate treatment nor addition of Chelex 100 resin improved the DNA yields. Bead mill homogenization in a lysis mixture containing chloroform, SDS, NaCl, and phosphate-Tris buffer (pH 8) was found to be the best physical lysis technique when DNA yield and cell lysis efficiency were used as criteria. The bead mill homogenization conditions were also optimized for speed and duration with two different homogenizers. Recovery of high-molecular-weight DNA was greatest when we used lower speeds and shorter times (30 to 120 s). We evaluated four different DNA purification methods (silica-based DNA binding, agarose gel electrophoresis, ammonium acetate precipitation, and Sephadex G-200 gel filtration) for DNA recovery and removal of PCR inhibitors from crude extracts. Sephadex G-200 spin column purification was found to be the best method for removing PCR-inhibiting substances while minimizing DNA loss during purification. Our results indicate that for these types of samples, optimum DNA recovery requires brief, low-speed bead mill homogenization in the presence of a phosphate-buffered SDS-chloroform mixture, followed by Sephadex G-200 column purification.