Revealing off-target cleavage specificities of zinc-finger nucleases by in vitro selection

Engineered zinc-finger nucleases (ZFNs) are promising tools for genome manipulation, and determining off-target cleavage sites of these enzymes is of great interest. We developed an in vitro selection method that interrogates 10(11) DNA sequences for cleavage by active, dimeric ZFNs. The method revealed hundreds of thousands of DNA sequences, some present in the human genome, that can be cleaved in vitro by two ZFNs: CCR5-224 and VF2468, which target the endogenous human CCR5 and VEGFA genes, respectively. Analysis of identified sites in one cultured human cell line revealed CCR5-224-induced changes at nine off-target loci, though this remains to be tested in other relevant cell types. Similarly, we observed 31 off-target sites cleaved by VF2468 in cultured human cells. Our findings establish an energy compensation model of ZFN specificity in which excess binding energy contributes to off-target ZFN cleavage and suggest strategies for the improvement of future ZFN design.     

Enhancing zinc-finger-nuclease activity with improved obligate heterodimeric architectures

Zinc-finger nucleases (ZFNs) drive efficient genome editing by introducing a double-strand break into the targeted gene. Cleavage is induced when two custom-designed ZFNs heterodimerize upon binding DNA to form a catalytically active nuclease complex. The importance of this dimerization event for subsequent cleavage activity has stimulated efforts to engineer the nuclease interface to prevent undesired homodimerization. Here we report the development and application of a yeast-based selection system designed to functionally interrogate the ZFN dimer interface. We identified critical residues involved in dimerization through the isolation of cold-sensitive nuclease domains. We used these residues to engineer ZFNs that have superior cleavage activity while suppressing homodimerization. The improvements were portable to orthogonal domains, allowing the concomitant and independent cleavage of two loci using two different ZFN pairs. These ZFN architectures provide a general means for obtaining highly efficient and specific genome modification.     

Adding fingers to an engineered zinc finger nuclease can reduce activity

Zinc finger nucleases (ZFNs) have been used to direct precise modifications of the genetic information in living cells at high efficiency. An important consideration in the design of ZFNs is the number of zinc fingers that are required for efficient and specific cleavage. We examined dimeric ZFNs composed of [1]+[1], [2]+[2], [3]+[3], [4]+[4], [5]+[5], and [6]+[6] zinc fingers, targeting 6, 12, 18, 24, 30, and 36 bp, respectively. We found that [1]+[1] and [2]+[2] fingers supported neither in vitro cleavage nor single-strand annealing in a cell-based recombination assay. An optimal ZFN activity was observed for [3]+[3] and [4]+[4] fingers. Surprisingly, [5]+[5] and [6]+[6] fingers exhibited significantly reduced activity. While the extra fingers were not found to dramatically increase toxicity, directly inhibit recombination, or perturb the ZFN target site, we demonstrate the ability of subsets of three fingers in six-finger arrays to bind independently to regions of the target site, possibly explaining the decrease in activity. These results have important implications for the design of new ZFNs, as they show that in some cases an excess of fingers may actually negatively affect the performance of engineered multifinger proteins. Maximal ZFN activity will require an optimization of both DNA binding affinity and specificity.     

An improved zinc-finger nuclease architecture for highly specific genome editing

Genome editing driven by zinc-finger nucleases (ZFNs) yields high gene-modification efficiencies (>10%) by introducing a recombinogenic double-strand break into the targeted gene. The cleavage event is induced using two custom-designed ZFNs that heterodimerize upon binding DNA to form a catalytically active nuclease complex. Using the current ZFN architecture, however, cleavage-competent homodimers may also form that can limit safety or efficacy via off-target cleavage. Here we develop an improved ZFN architecture that eliminates this problem. Using structure-based design, we engineer two variant ZFNs that efficiently cleave DNA only when paired as a heterodimer. These ZFNs modify a native endogenous locus as efficiently as the parental architecture, but with a >40-fold reduction in homodimer function and much lower levels of genome-wide cleavage. This architecture provides a general means for improving the specificity of ZFNs as gene modification reagents.     

Binding of two zinc finger nuclease monomers to two specific sites is required for effective double-strand DNA cleavage

Custom-designed zinc finger nucleases (ZFNs) are becoming powerful tools in gene targeting-the process of replacing a gene within a genome by homologous recombination. Here, we have studied the DNA cleavage by one such ZFN, DeltaQNK-FN, in order to gain insight into how ZFNs cleave DNA and how two inverted sites promote double-strand cleavage. DNA cleavage by DeltaQNK-FN is greatly facilitated when two DeltaQNK-binding sites are close together in an inverted orientation. Substrate cleavage was not first order with respect to the concentration of DeltaQNK-FN, indicating that double-strand cleavage requires dimerization of the FokI cleavage domain. Rates of DNA cleavage decrease as the substrate concentrations increase, suggesting that the DeltaQNK-FN molecules are effectively "trapped" in a 1:1 complex on DNA when the DNA is in excess. The physical association of two ZFN monomers on DNA was monitored by using the biotin-pull-down assay, which showed that the formation of DeltaQNK-FN active complex required both binding of the two DeltaQNK-FN molecules to specific DNA sites and divalent metal ions.     

Engineered zinc finger nickases induce homology-directed repair with reduced mutagenic effects

Engineered zinc finger nucleases (ZFNs) induce DNA double-strand breaks at specific recognition sequences and can promote efficient introduction of desired insertions, deletions or substitutions at or near the cut site via homology-directed repair (HDR) with a double- and/or single-stranded donor DNA template. However, mutagenic events caused by error-prone non-homologous end-joining (NHEJ)-mediated repair are introduced with equal or higher frequency at the nuclease cleavage site. Furthermore, unintended mutations can also result from NHEJ-mediated repair of off-target nuclease cleavage sites. Here, we describe a simple and general method for converting engineered ZFNs into zinc finger nickases (ZFNickases) by inactivating the catalytic activity of one monomer in a ZFN dimer. ZFNickases show robust strand-specific nicking activity in vitro. In addition, we demonstrate that ZFNickases can stimulate HDR at their nicking site in human cells, albeit at a lower frequency than by the ZFNs from which they were derived. Finally, we find that ZFNickases appear to induce greatly reduced levels of mutagenic NHEJ at their target nicking site. ZFNickases thus provide a promising means for inducing HDR-mediated gene modifications while reducing unwanted mutagenesis caused by error-prone NHEJ.     

Structure-based redesign of the dimerization interface reduces the toxicity of zinc-finger nucleases

Artificial endonucleases consisting of a FokI cleavage domain tethered to engineered zinc-finger DNA-binding proteins have proven useful for stimulating homologous recombination in a variety of cell types. Because the catalytic domain of zinc-finger nucleases (ZFNs) must dimerize to become active, two subunits are typically assembled as heterodimers at the cleavage site. The use of ZFNs is often associated with significant cytotoxicity, presumably due to cleavage at off-target sites. Here we describe a structure-based approach to reducing off-target cleavage. Using in silico protein modeling and energy calculations, we increased the specificity of target site cleavage by preventing homodimerization and lowering the dimerization energy. Cell-based recombination assays confirmed that the modified ZFNs were as active as the original ZFNs but elicit significantly less genotoxicity. The improved safety profile may facilitate therapeutic application of the ZFN technology.     

Unidirectional cloning by cleaving heterogeneous sites with a single sandwiched zinc finger nuclease

We previously developed a novel type of zinc finger nucleases (ZFNs), sandwiched ZFNs that can discriminate DNA substrates from cleavage products and thus cleave DNA much more efficiently than conventional ZFNs as well as perform with multiple turnovers like restriction endonucleases. In the present study, we used the sandwiched ZFN to unidirectionally clone exogenous genes into target vectors by cleaving heterogeneous sites that contained heterogeneous spacer DNAs between two zinc-finger protein binding sites with a single sandwiched ZFN. We demonstrated that the sandwiched ZFN cleaved a 40-fold excess of both insert and vector plasmids within 1 h and confirmed by sequencing that the resulting recombinants harbored the inserted DNA fragment in the desired orientation. Because sandwiched ZFNs can recognize and cleave a variety of long (?26-bp) target DNAs, they may not only expand the utility of ZFNs for construction of recombinant plasmids, but also serve as useful meganucleases for synthesis of artificial genomes.     

Autonomous zinc-finger nuclease pairs for targeted chromosomal deletion

Zinc-finger nucleases (ZFNs) have been successfully used for rational genome engineering in a variety of cell types and organisms. ZFNs consist of a non-specific FokI endonuclease domain and a specific zinc-finger DNA-binding domain. Because the catalytic domain must dimerize to become active, two ZFN subunits are typically assembled at the cleavage site. The generation of obligate heterodimeric ZFNs was shown to significantly reduce ZFN-associated cytotoxicity in single-site genome editing strategies. To further expand the application range of ZFNs, we employed a combination of in silico protein modeling, in vitro cleavage assays, and in vivo recombination assays to identify autonomous ZFN pairs that lack cross-reactivity between each other. In the context of ZFNs designed to recognize two adjacent sites in the human HOXB13 locus, we demonstrate that two autonomous ZFN pairs can be directed simultaneously to two different sites to induce a chromosomal deletion in ∼10% of alleles. Notably, the autonomous ZFN pair induced a targeted chromosomal deletion with the same efficacy as previously published obligate heterodimeric ZFNs but with significantly less toxicity. These results demonstrate that autonomous ZFNs will prove useful in targeted genome engineering approaches wherever an application requires the expression of two distinct ZFN pairs.     

Directed Evolution of an Enhanced and Highly Efficient FokI Cleavage Domain for Zinc Finger Nucleases

Zinc finger nucleases (ZFNs) are powerful tools for gene therapy and genetic engineering. The high specificity and affinity of these chimeric enzymes are based on custom-designed zinc finger proteins (ZFPs). To improve the performance of existing ZFN technology, we developed an in vivo evolution-based approach to improve the efficacy of the FokI cleavage domain (FCD). After multiple rounds of cycling mutagenesis and DNA shuffling, a more efficient nuclease variant (Sharkey) was generated. In vivo analyses indicated that Sharkey is > 15-fold more active than wild-type FCD on a diverse panel of cleavage sites. Further, a mammalian cell-based assay showed a three to sixfold improvement in targeted mutagenesis for ZFNs containing derivatives of the Sharkey cleavage domain. We also identified mutations that impart sequence specificity to the FCD that might be utilized in future studies to further refine ZFNs through cooperative specificity. In addition, Sharkey was observed to enhance the cleavage profiles of previously published and newly selected heterodimer ZFN architectures. This enhanced and highly efficient cleavage domain will aid in a variety of ZFN applications in medicine and biology.     

A novel zinc-finger nuclease platform with a sequence-specific cleavage module

Zinc-finger nucleases (ZFNs) typically consist of three to four zinc fingers (ZFs) and the non-specific DNA-cleavage domain of the restriction endonuclease FokI. In this configuration, the ZFs constitute the binding module and the FokI domain the cleavage module. Whereas new binding modules, e.g. TALE sequences, have been considered as alternatives to ZFs, no efforts have been undertaken so far to replace the catalytic domain of FokI as the cleavage module in ZFNs. Here, we have fused a three ZF array to the restriction endonuclease PvuII to generate an alternative ZFN. While PvuII adds an extra element of specificity when combined with ZFs, ZF-PvuII constructs must be designed such that only PvuII sites with adjacent ZF-binding sites are cleaved. To achieve this, we introduced amino acid substitutions into PvuII that alter K(m) and k(cat) and increase fidelity. The optimized ZF-PvuII fusion constructs cleave DNA at addressed sites with a >1000-fold preference over unaddressed PvuII sites in vitro as well as in cellula. In contrast to the 'analogous' ZF-FokI nucleases, neither excess of enzyme over substrate nor prolonged incubation times induced unaddressed cleavage in vitro. These results present the ZF-PvuII platform as a valid alternative to conventional ZFNs.     

Sandwiched zinc-finger nucleases harboring a single-chain FokI dimer as a DNA-cleavage domain

Zinc-finger nucleases (ZFNs) are a powerful tool for manipulation of genomic DNA. Recently, we reported a new ZFN composed of one artificial zinc-finger protein (AZP) and a single-chain FokI dimer (scFokI) that refines ZFN technology. While AZP-scFokI cleaved DNA specifically around the AZP-target site, several nucleotide positions were cleaved due to the mobility of the scFokI domain. In the present study, we aimed to improve the DNA-cleavage specificity at the nucleotide level. To this end, we sandwiched a scFokI domain between two AZPs to reduce the mobility of the scFokI moiety when bound to DNA. We demonstrated that the AZP-sandwiched scFokI cleaved DNA at a single nucleotide position of a target plasmid, in which two AZP-binding sites were connected with a 6-bp spacer, with multiple turnovers. Further improvement of AZP-sandwiched scFokI will lead to development of ideal artificial meganucleases.     

In silico abstraction of zinc finger nuclease cleavage profiles reveals an expanded landscape of off-target sites

Gene-editing nucleases enable targeted modification of DNA sequences in living cells, thereby facilitating efficient knockout and precise editing of endogenous loci. Engineered nucleases also have the potential to introduce mutations at off-target sites of action. Such unintended alterations can confound interpretation of experiments and can have implications for development of therapeutic applications. Recently, two improved methods for identifying the off-target effects of zinc finger nucleases (ZFNs) were described–one using an in vitro cleavage site selection method and the other exploiting the insertion of integration-defective lentiviruses into nuclease-induced double-stranded DNA breaks. However, application of these two methods to a ZFN pair targeted to the human CCR5 gene led to identification of largely non-overlapping off-target sites, raising the possibility that additional off-target sites might exist. Here, we show that in silico abstraction of ZFN cleavage profiles obtained from in vitro cleavage site selections can greatly enhance the ability to identify potential off-target sites in human cells. Our improved method should enable more comprehensive profiling of ZFN specificities.     

Zinc finger protein-dependent and -independent contributions to the in vivo off-target activity of zinc finger nucleases

Zinc finger nucleases (ZFNs) facilitate tailor-made genomic modifications in vivo through the creation of targeted double-stranded breaks. They have been employed to modify the genomes of plants and animals, and cell-based therapies utilizing ZFNs are undergoing clinical trials. However, many ZFNs display dose-dependent toxicity presumably due to the generation of undesired double-stranded breaks at off-target sites. To evaluate the parameters influencing the functional specificity of ZFNs, we compared the in vivo activity of ZFN variants targeting the zebrafish kdrl locus, which display both high on-target activity and dose-dependent toxicity. We evaluated their functional specificity by assessing lesion frequency at 141 potential off-target sites using Illumina sequencing. Only a minority of these off-target sites accumulated lesions, where the thermodynamics of zinc finger–DNA recognition appear to be a defining feature of active sites. Surprisingly, we observed that both the specificity of the incorporated zinc fingers and the choice of the engineered nuclease domain could independently influence the fidelity of these ZFNs. The results of this study have implications for the assessment of likely off-target sites within a genome and point to both zinc finger-dependent and -independent characteristics that can be tailored to create ZFNs with greater precision.     

In vivo cleavage of transgene donors promotes nuclease‐mediated targeted integration

Targeted DNA integration is commonly used to eliminate position effects on transgene expression. Integration can be targeted to specific sites in the genome via both homology‐based and homology‐independent processes. Both pathways start the integration process with a site‐specific break in the chromosome, typically from a zinc‐finger nuclease (ZFN). We previously described an efficient homology‐independent targeted integration technique that captures short (<100 bp) pieces of DNA at chromosomal breaks created by ZFNs. We show here that inclusion of a nuclease target site on the donor plasmid followed by in vivo nuclease cleavage of both the donor and the chromosome results in efficient integration of large, transgene‐sized DNA molecules into the chromosomal double‐strand break. Successful targeted integration via in vivo donor linearization is demonstrated at five distinct loci in two mammalian cell types, highlighting the generality of the approach. Finally, we show that CHO cells, a cell type recalcitrant to homology‐based integration, are proficient at capture of in vivo‐linearized transgene donors. Moreover, we demonstrate knockout of the hamster FUT8 gene via the simultaneous ZFN‐ or TALE nuclease‐mediated integration of an antibody cassette. Our results enable efficient targeted transgene addition to cells and organisms that fare poorly with traditional homology‐driven approaches. Biotechnol. Bioeng. 2013; 110: 871–880. © 2012 Wiley Periodicals, Inc.     

Attenuation of Zinc Finger Nuclease Toxicity by Small-Molecule Regulation of Protein Levels

Zinc finger nucleases (ZFNs) have been used successfully to create genome-specific double-strand breaks and thereby stimulate gene targeting by several thousand fold. ZFNs are chimeric proteins composed of a specific DNA-binding domain linked to a non-specific DNA-cleavage domain. By changing key residues in the recognition helix of the specific DNA-binding domain, one can alter the ZFN binding specificity and thereby change the sequence to which a ZFN pair is being targeted. For these and other reasons, ZFNs are being pursued as reagents for genome modification, including use in gene therapy. In order for ZFNs to reach their full potential, it is important to attenuate the cytotoxic effects currently associated with many ZFNs. Here, we evaluate two potential strategies for reducing toxicity by regulating protein levels. Both strategies involve creating ZFNs with shortened half-lives and then regulating protein level with small molecules. First, we destabilize ZFNs by linking a ubiquitin moiety to the N-terminus and regulate ZFN levels using a proteasome inhibitor. Second, we destabilize ZFNs by linking a modified destabilizing FKBP12 domain to the N-terminus and regulate ZFN levels by using a small molecule that blocks the destabilization effect of the N-terminal domain. We show that by regulating protein levels, we can maintain high rates of ZFN-mediated gene targeting while reducing ZFN toxicity.     

Targeted editing of goat genome with modular-assembly zinc finger nucleases based on activity prediction by computational molecular modeling

Zinc finger nuclease (ZFN) technology can mediate targeted genome modification to produce transgenic animals in a high-efficient and biological-safe way. Modular assembly is a rapid, convenient and open-source method for the synthesis of ZFNs. However, this biotechnology is hampered by multistep construction, low-efficiency editing and off-target cleavage. Here we synthesized and tested six pairs of three- or four-finger ZFNs to target one site in goat beta-lactoglobulin (BLG, a dominant allergen in goat milk) gene. Homology modeling was applied to build the structure model of ZFNs to predict their editing activities targeting at goat BLG gene. Goat fibroblast cells were transfected with plasmids that encoded ZFN pairs, and genomic DNA was isolated 72 h later for genome editing efficiency assay. The results of editing efficiency assay demonstrated that ZFNs with optimal interaction modes can edit goat BLG gene more efficiently, whereas ZFNs with unexpected interaction modes showed lower activities in editing BLG gene. We concluded that modular-assembly ZFNs can provide a rapid, public-available, and easy-to-practice platform for transgenic animal research and molecular modeling would help as a useful tool for ZFNs activity prediction.     

Sandwiched zinc-finger nucleases demonstrating higher homologous recombination rates than conventional zinc-finger nucleases in mammalian cells

We previously reported that our sandwiched zinc-finger nucleases (ZFNs), in which a DNA cleavage domain is inserted between two artificial zinc-finger proteins, cleave their target DNA much more efficiently than conventional ZFNs in vitro. In the present study, we compared DNA cleaving efficiencies of a sandwiched ZFN with those of its corresponding conventional ZFN in mammalian cells. Using a plasmid-based single-strand annealing reporter assay in HEK293 cells, we confirmed that the sandwiched ZFN induced homologous recombination more efficiently than the conventional ZFN; reporter activation by the sandwiched ZFN was more than eight times that of the conventional one. Western blot analysis showed that the sandwiched ZFN was expressed less frequently than the conventional ZFN, indicating that the greater DNA-cleaving activity of the sandwiched ZFN was not due to higher expression of the sandwiched ZFN. Furthermore, an MTT assay demonstrated that the sandwiched ZFN did not have any significant cytotoxicity under the DNA-cleavage conditions. Thus, because our sandwiched ZFN cleaved more efficiently than its corresponding conventional ZFN in HEK293 cells as well as in vitro, sandwiched ZFNs are expected to serve as an effective molecular tool for genome editing in living cells.