Spatial distribution and orientation of dermatan sulfate in human medial collateral ligament

The proteoglycan decorin and its associated glycosaminoglycan (GAG), dermatan sulfate (DS), regulate collagen fibril formation, control fibril diameter, and have been suggested to contribute to the mechanical stability and material properties of connective tissues. The spatial distribution and orientation of DS within the tissue are relevant to these mechanical roles, but measurements of length and orientation from 2D transmission electron microscopy (TEM) are prone to errors from projection. The objectives of this study were to construct a 3D geometric model of DS GAGs and collagen fibrils, and to use the model to interpret TEM measurements of the spatial orientation and length of DS GAGs in the medial collateral ligament of the human knee. DS was distinguished from other sulfated GAGs by treating tissue with chondroitinase B, an enzyme that selectively degrades DS. An image processing pipeline was developed to analyze the TEM micrographs. The 3D model of collagen and GAGs quantified the projection error in the 2D TEM measurements. Model predictions of 3D GAG orientation were highly sensitive to the assumed GAG length distribution, with the baseline input distribution of 69+/-23 nm providing the best predictions of the angle measurements from TEM micrographs. The corresponding orientation distribution for DS GAGs was maximal at orientations orthogonal to the collagen fibrils, tapering to near zero with axial alignment. Sulfated GAGs that remained after chondroitinase B treatment were preferentially aligned along the collagen fibril. DS therefore appears more likely to bridge the interfibrillar gap than non-DS GAGs. In addition to providing quantitative data for DS GAG length and orientation in the human MCL, this study demonstrates how a 3D geometric model can be used to provide a priori information for interpretation of geometric measurements from 2D micrographs.     

Possible role of decorin glycosaminoglycans in fibril to fibril force transfer in relative mature tendons--a computational study from molecular to microstructural level

Experimental studies on immature tendons have shown that the collagen fibril net is discontinuous. Manifold evidences, despite not being conclusive, indicate that mature tissue is discontinuous as well. According to composite theory, there is no requirement that the fibrils should extend from one end of the tissue to the other; indeed, an interfibrillar matrix with a low elastic modulus would be sufficient to guarantee the mechanical properties of the tendon. Possible mechanisms for the stress-transfer involve the interfibrillar proteoglycans and can be related to the matrix shear stress and to electrostatic non-covalent forces. Recent studies have shown that the glycosaminoglycans (GAGs) bound to decorin act like bridges between contiguous fibrils connecting adjacent fibril every 64-68 nm; this architecture would suggest their possible role in providing the mechanical integrity of the tendon structure. The present paper investigates the ability of decorin GAGs to transfer forces between adjacent fibrils. In order to test this hypothesis the stiffness of chondroitin-6-sulphate, a typical GAG associated to decorin, has been evaluated through the molecular mechanics approach. The obtained GAG stiffness is piecewise linear with an initial plateau at low strains (<800%) and a high stiffness region (3.1 x 10(-11)N/nm) afterwards. By introducing the calculated GAG stiffness in a multi-fibril model, miming the relative mature tendon architecture, the stress-strain behaviour of the collagen fibre was determined. The fibre incremental elastic modulus obtained ranges between 100 and 475 MPa for strains between 2% and 6%. The elastic modulus value depends directly on the fibril length, diameter and inversely on the interfibrillar distance. In particular, according to the obtained results, the length of the fibril is likely to play the major role in determining stiffness in mature tendons.     

Conformation and sequence evidence for two-fold symmetry in left-handed beta-helix fold

The glycosaminoglycan (GAG) side-chains of small leucine-rich proteoglycans have been postulated to mechanically cross-link adjacent collagen fibrils and contribute to tendon mechanics. Enzymatic depletion of tendon GAGs (chondroitin and dermatan sulfate) has emerged as a preferred method to experimentally assess this role. However, GAG removal is typically incomplete and the possibility remains that extant GAGs may remain mechanically functional. The current study specifically investigated the potential mechanical effect of the remaining GAGs after partial enzymatic digestion.A three-dimensional finite element model of tendon was created based upon the concept of proteoglycan mediated inter-fibril load sharing. Approximately 250 interacting, discontinuous collagen fibrils were modeled as having a length of 400 μm, being composed of rod elements of length 67 nm and E-modulus 1 GPa connected in series. Spatial distribution and diameters of these idealized fibrils were derived from a representative cross-sectional electron micrograph of tendon. Rod element lengths corresponded to the collagen fibril D-Period, widely accepted to act as a binding site for decorin and biglycan, the most abundant proteoglycans in tendon. Each element node was connected to nodes of any neighboring fibrils within a radius of 100 nm, the slack length of unstretched chondroitin sulfate. These GAG cross-links were the sole mechanism for lateral load sharing among the discontinuous fibrils, and were modeled as bilinear spring elements. Simulation of tensile testing of tendon with complete cross-linking closely reproduced corresponding experiments on rat tail tendons. Random reduction of 80% of GAG cross-links (matched to a conservative estimate of enzymatic depletion efficacy) predicted a drop of 14% in tendon modulus. Corresponding mechanical properties derived from experiments on rat tail tendons treated in buffer with and without chondroitinase ABC were apparently unaffected, regardless of GAG depletion. Further tests for equivalence, conservatively based on effect size limits predicted by the model, confirmed equivalent stiffness between enzymatically depleted tendons and their native controls.Although the model predicts that relatively small quantities of GAGs acting as primary collagen cross-linking elements could provide mechanical integrity to the tendon, partial enzymatic depletion of GAGs should result in mechanical changes that are not reflected in analogous experimental testing. We thus conclude that GAG side chains of small leucine-rich proteoglycans are not a primary determinant of tensile mechanical behavior in mature rat tail tendons.     

Contributions of Glycosaminoglycans to Collagen Fiber Recruitment in Constitutive Modeling of Arterial Mechanics

The contribution of glycosaminoglycans (GAGs) to the biological and mechanical functions of biological tissue has emerged as an important area of research. GAGs provide structural basis for the organization and assembly of extracellular matrix (ECM). The mechanics of tissue with low GAG content can be indirectly affected by the interaction of GAGs with collagen fibers, which have long been known to be one of the primary contributors to soft tissue mechanics. Our earlier study showed that enzymatic GAG depletion results in straighter collagen fibers that are recruited at lower levels of stretch, and a corresponding shift in earlier arterial stiffening (Mattson et al., 2016). In this study, the effect of GAGs on collagen fiber recruitment was studied through a structure-based constitutive model. The model incorporates structural information, such as fiber orientation distribution, content, and recruitment of medial elastin, medial collagen, and adventitial collagen fibers. The model was first used to study planar biaxial tensile stress-stretch behavior of porcine descending thoracic aorta. Changes in elastin and collagen fiber orientation distribution, and collagen fiber recruitment were then incorporated into the model in order to predict the stress-stretch behavior of GAG depleted tissue. Our study shows that incorporating early collagen fiber recruitment into the model predicts the stress-stretch response of GAG depleted tissue reasonably well (rms = 0.141); considering further changes of fiber orientation distribution does not improve the predicting capability (rms = 0.149). Our study suggests an important role of GAGs in arterial mechanics that should be considered in developing constitutive models.     

Viscoelastic properties of collagen: synchrotron radiation investigations and structural model

Collagen type I is the most abundant structural protein in tendon, skin and bone, and largely determines the mechanical behaviour of these connective tissues. To obtain a better understanding of the relationship between structure and mechanical properties, tensile tests and synchrotron X-ray scattering have been carried out simultaneously, correlating the mechanical behaviour with changes in the microstructure. Because intermolecular cross-links are thought to have a great influence on the mechanical behaviour of collagen, we also carried out experiments using cross-link-deficient tail-tendon collagen from rats fed with beta-APN, in addition to normal controls. The load-elongation curve of tendon collagen has a characteristic shape with, initially, an increasing slope, corresponding to an increasing stiffness, followed by yielding and then fracture. Cross-link-deficient collagen produces a quite different curve with a marked plateau appearing in some cases, where the length of the tendon increases at constant stress. With the use of in situ X-ray diffraction, it was possible to measure simultaneously the elongation of the collagen fibrils inside the tendon and of the tendon as a whole. The overall strain of the tendon was always larger than the strain in the individual fibrils, which demonstrates that some deformation is taking place in the matrix between fibrils. Moreover, the ratio of fibril strain to tendon strain was dependent on the applied strain rate. When the speed of deformation was increased, this ratio increased in normal collagen but generally decreased in cross-link-deficient collagen, correlating to the appearance of a plateau in the force-elongation curve indicating creep. We proposed a simple structural model, which describes the tendon at a hierarchical level, where fibrils and interfibrillar matrix act as coupled viscoelastic systems. All qualitative features of the strain-rate dependence of both normal and cross-link-deficient collagen can be reproduced within this model. This complements earlier models that considered the next smallest level of hierarchy, describing the deformation of collagen fibrils in terms of changes in their molecular packing.     

A computational remodeling approach to predict the physiological architecture of the collagen fibril network in corneo-scleral shells

Organized collagen fibrils form complex networks that introduce strong anisotropic and highly nonlinear attributes into the constitutive response of human eye tissues. Physiological adaptation of the collagen network and the mechanical condition within biological tissues are complex and mutually dependent phenomena. In this contribution, a computational model is presented to investigate the interaction between the collagen fibril architecture and mechanical loading conditions in the corneo-scleral shell. The biomechanical properties of eye tissues are derived from the single crimped fibril at the micro-scale via the collagen network of distributed fibrils at the meso-scale to the incompressible and anisotropic soft tissue at the macro-scale. Biomechanically induced remodeling of the collagen network is captured on the meso-scale by allowing for a continuous re-orientation of preferred fibril orientations and a continuous adaptation of the fibril dispersion. The presented approach is applied to a numerical human eye model considering the cornea and sclera. The predicted fibril morphology correlates well with experimental observations from X-ray scattering data.     

Probing the effect of glycosaminoglycan depletion on integrin interactions with collagen I fibrils in the native extracellular matrix environment

Fibrillar collagen–integrin interactions in the extracellular matrix (ECM) regulate a multitude of cellular processes and cell signalling. Collagen I fibrils serve as the molecular scaffolding for connective tissues throughout the human body and are the most abundant protein building blocks in the ECM. The ECM environment is diverse, made up of several ECM proteins, enzymes, and proteoglycans. In particular, glycosaminoglycans (GAGs), anionic polysaccharides that decorate proteoglycans, become depleted in the ECM with natural aging and their mis-regulation has been linked to cancers and other diseases. The impact of GAG depletion in the ECM environment on collagen I protein interactions and on mechanical properties is not well understood. Here, we integrate ELISA protein binding assays with liquid high-resolution atomic force microscopy (AFM) to assess the effects of GAG depletion on the interaction of collagen I fibrils with the integrin α2I domain using separate rat tails. ELISA binding assays demonstrate that α2I preferentially binds to GAG-depleted collagen I fibrils in comparison to native fibrils. By amplitude modulated AFM in air and in solution, we find that GAG-depleted collagen I fibrils retain structural features of the native fibrils, including their characteristic D-banding pattern, a key structural motif. AFM fast force mapping in solution shows that GAG depletion reduces the stiffness of individual fibrils, lowering the indentation modulus by half compared to native fibrils. Together these results shed new light on how GAGs influence collagen I fibril–integrin interactions and may aid in strategies to treat diseases that result from GAG mis-regulation.     

A constitutive model for vascular tissue that integrates fibril, fiber and continuum levels with application to the isotropic and passive properties of the infrarenal aorta

A fundamental understanding of the mechanical properties of the extracellular matrix (ECM) is critically important to quantify the amount of macroscopic stress and/or strain transmitted to the cellular level of vascular tissue. Structural constitutive models integrate histological and mechanical information, and hence, allocate stress and strain to the different microstructural components of the vascular wall. The present work proposes a novel multi-scale structural constitutive model of passive vascular tissue, where collagen fibers are assembled by proteoglycan (PG) cross-linked collagen fibrils and reinforce an otherwise isotropic matrix material. Multiplicative kinematics account for the straightening and stretching of collagen fibrils, and an orientation density function captures the spatial organization of collagen fibers in the tissue. Mechanical and structural assumptions at the collagen fibril level define a piece-wise analytical stress-stretch response of collagen fibers, which in turn is integrated over the unit sphere to constitute the tissue's macroscopic mechanical properties. The proposed model displays the salient macroscopic features of vascular tissue, and employs the material and structural parameters of clear physical meaning. Likewise, the constitutive concept renders a highly efficient multi-scale structural approach that allows for the numerical analysis at the organ level. Model parameters were estimated from isotropic mean-population data of the normal and aneurysmatic aortic wall and used to predict in-vivo stress states of patient-specific vascular geometries, thought to demonstrate the robustness of the particular Finite Element (FE) implementation. The collagen fibril level of the multi-scale constitutive formulation provided an interface to integrate vascular wall biology and to account for collagen turnover.     

Effect of sulfated glycosaminoglycan digestion on the transverse permeability of medial collateral ligament

Dermatan and chondroitin sulfate glycosaminoglycans (GAGs) comprise over 90% of the GAG content in ligament. Studies of their mechanical contribution to soft tissues have reported conflicting results. Measuring the transient compressive response and biphasic material parameters of the tissue may elucidate the contributions of GAGs to the viscoelastic response to deformation. The hypotheses of the current study were that digestion of sulfated GAGs would decrease compressive stress and aggregate modulus while increasing the permeability of porcine medial collateral ligament (MCL). Confined compression stress relaxation experiments were carried out on porcine MCL and tissue treated with chondroitinase ABC (ChABC). Results were fit to a biphasic constitutive model to derive permeability and aggregate modulus. Bovine articular cartilage was used as a benchmark tissue to verify that the apparatus provided reliable results. GAG digestion removed up to 88% of sulfated GAGs from the ligament. Removal of sulfated GAGs increased the permeability of porcine MCL nearly 6-fold versus control tissues. Peak stress decreased significantly. Bovine articular cartilage exhibited the typical reduction of GAG content and resultant decreases in stress and modulus and increases in permeability with ChABC digestion. Given the relatively small amount of GAG in ligament (<1% of tissue dry weight) and the significant change in peak stress and permeability upon removal of GAGs, sulfated GAGs may play a significant role in maintaining the apposition of collagen fibrils in the transverse direction, thus supporting dynamic compressive loads experienced by the ligament during complex joint motion.     

Changes in the morphology and synthetic activity of cultured rat tail tendon

Summary Isolated single fascicles from tail tendons of young rats were freed of epitenon cells and cultured in vitro for up to 7 days. The tissue remained viable, as judged by the structural integrity of cell organelles and the ability to synthesize DNA and glycosaminoglycans (GAG). The rate of DNA synthesis peaked after 2 days in culture and decreased slowly thereafter. Concomitantly, an increase in cell number was noted at the periphery of the fascicle. GAG production also increased during culture, sulphated GAG being increased proportionately more than hyaluronic acid. Dermatan sulphate was the predominant sulphated GAG in freshly isolated fascicles, but in cultured tissue, the newly synthesized sulphated GAG was more sensitive to degradation by chondroitinase AC and had an increased electrophoretic mobility. Fine structural changes were observed in cultured tissues such as the retraction of cell processes. rounding up of cell bodies and the appearance of gaps between collagen fibrils. Cultured tenocytes also frequently contained apparently phagocytized collagen fibrils which were not seen in freshly isolated fascicles, and this appearance was suggestive of collagen degradation occurring in vitro, although no change in the total hydroxyproline content was noted. The data show that when individual fascicles are cultured in vitro they undergo a process of matrix remodelling which has features in common with events occurring in vivo when tendons have been surgically manipulated.     

Structural alteration of glycosaminoglycan side chains and spatial disorganization of collagen networks in the skin of patients with mcEDS-CHST14

Musculocontractural Ehlers-Danlos syndrome (mcEDS) due to CHST14/D4ST1 deficiency (mcEDS-CHST14) is a recently delineated type of EDS caused by biallelic loss-of-function mutations in CHST14, which results in the depletion of dermatan sulfate (DS). Clinical characteristics of mcEDS-CHST14 consist of multiple malformations and progressive fragility-related manifestations, including skin hyperextensibility and fragility. Skin fragility is suspected to result from the impaired assembly of collagen fibrils caused by alteration of the glycosaminoglycan (GAG) chain of decorin-proteoglycan (PG) from DS to chondroitin sulfate (CS). This systematic investigation of the skin pathology of patients with mcEDS-CHST14 comprised both immunostaining of decorin and transmission electron microscopy-based cupromeronic blue staining to visualize GAG chains. Collagen fibrils were dispersed in the affected papillary to reticular dermis; in contrast, they were regularly and tightly assembled in controls. Moreover, the fibrils exhibited a perpendicular arrangement to the affected epidermis, whereas fibrils were parallel to control epidermis. Affected GAG chains were linear, stretching from the outer surface of collagen fibrils to adjacent fibrils; in contrast, those of controls were curved, maintaining close contact with attached collagen fibrils. This is the first observation of compositional alteration, from DS to CS, of GAG side chains, which caused structural alteration of GAG side chains and resulted in spatial disorganization of collagen networks; this presumably disrupted the ring-mesh structure of GAG side chains surrounding collagen fibrils. McEDS-CHST14 provides a critical example of the importance of DS in GAG side chains of decorin-PG during assembly of collagen fibrils in maintenance of connective tissues.     

Fracture Mechanics of Collagen Fibrils: Influence of Natural Cross-Links

Tendons are important load-bearing structures, which are frequently injured in both sports and work. Type I collagen fibrils are the primary components of tendons and carry most of the mechanical loads experienced by the tissue, however, knowledge of how load is transmitted between and within fibrils is limited. The presence of covalent enzymatic cross-links between collagen molecules is an important factor that has been shown to influence mechanical behavior of the tendons. To improve our understanding of how molecular bonds translate into tendon mechanics, we used an atomic force microscopy technique to measure the mechanical behavior of individual collagen fibrils loaded to failure. Fibrils from human patellar tendons, rat-tail tendons (RTTs), NaBH₄ reduced RTTs, and tail tendons of Zucker diabetic fat rats were tested. We found a characteristic three-phase stress-strain behavior in the human collagen fibrils. There was an initial rise in modulus followed by a plateau with reduced modulus, which was finally followed by an even greater increase in stress and modulus before failure. The RTTs also displayed the initial increase and plateau phase, but the third region was virtually absent and the plateau continued until failure. The importance of cross-link lability was investigated by NaBH₄ reduction of the rat-tail fibrils, which did not alter their behavior. These findings shed light on the function of cross-links at the fibril level, but further studies will be required to establish the underlying mechanisms.     

Designed to fail: a novel mode of collagen fibril disruption and its relevance to tissue toughness

Collagen fibrils are nanostructured biological cables essential to the structural integrity of many of our tissues. Consequently, understanding the structural basis of their robust mechanical properties is of great interest. Here we present what to our knowledge is a novel mode of collagen fibril disruption that provides new insights into both the structure and mechanics of native collagen fibrils. Using enzyme probes for denatured collagen and scanning electron microscopy, we show that mechanically overloading collagen fibrils from bovine tail tendons causes them to undergo a sequential, two-stage, selective molecular failure process. Denatured collagen molecules-meaning molecules with a reduced degree of time-averaged helicity compared to those packed in undamaged fibrils-were first created within kinks that developed at discrete, repeating locations along the length of fibrils. There, collagen denaturation within the kinks was concentrated within certain subfibrils. Additional denatured molecules were then created along the surface of some disrupted fibrils. The heterogeneity of the disruption within fibrils suggests that either mechanical load is not carried equally by a fibril's subcomponents or that the subcomponents do not possess homogenous mechanical properties. Meanwhile, the creation of denatured collagen molecules, which necessarily involves the energy intensive breaking of intramolecular hydrogen bonds, provides a physical basis for the toughness of collagen fibrils.     

A role for glycosaminoglycans in the development of collagen fibrils

Extensive data on the glycosaminoglycan (GAG) composition and the collagen fibril diameter distribution have been collected for a diverse range of connective tissues. It is shown that tissues with the smallest diameter collagen fibrils (mass-average diameter less than 60 nm) have high concentrations of hyaluronic acid and that tissues with the largest diameter collagen fibrils (mass-average diameter approximately 200 nm) have high concentrations of dermatan sulphate. It is suggested that the lateral growth of fibrils beyond a diameter of about 60 nm is inhibited by the presence of an excess of hyaluronic acid but that this inhibitory effect may be removed by an increasing concentration of chondroitin sulphate and/or dermatan sulphate. It is also postulated that high concentrations of chondroitin sulphate will inhibit fibril growth beyond a mass-average diameter of approximately 150 nm. Such an inhibition may in turn be removed by an increasing concentration of dermatan sulphate such that it becomes the dominant GAG present in the tissue.     

Transversely isotropic distribution of sulfated glycosaminoglycans in human medial collateral ligament: A quantitative analysis

Decorin and its associated glycosaminoglycan (GAG) side chain, dermatan sulfate (DS), play diverse roles in soft tissue formation and potentially aid in the mechanical integrity of the tissue. Deeper understanding of the distribution and orientation of the GAGs on a microscopic level may help elucidate the structure/function relationship of these important molecules. The hypothesis of the present study was that sulfated GAGs are aligned with transversely isotropic material symmetry in human medial collateral ligament (MCL) with the collagen acting as the axis of symmetry. To test the hypothesis, sulfated GAGs were visualized using transmission electron microscopy (TEM). Three orthogonal anatomical planes were examined to evaluate GAG distributions against symmetry criteria. GAG populations were differentiated using targeted enzyme digestion. Results suggest that sulfated GAGs including DS, chondroitin sulfates A and C, as well as other sub-populations assume transversely isotropic distributions in human MCL. Sulfated GAGs in the plane normal to the collagen axis were found to be isotropic with no preferred orientation. GAGs in the two planes along the collagen axis did not statistically differ and exhibited apparent bimodal distributions, favoring orthogonal distributions with over half at other angles with respect to collagen. A previously developed model, GAGSim3D, was used to interpret potential TEM artifacts. The data collected herein provide refined inputs to micro-scale models of the structure/function relationship of sulfated GAGs in soft tissues.     

A rheological network model for the continuum anisotropic and viscoelastic behavior of soft tissue

The mechanical behavior of soft tissue demonstrates a number of complex features including nonlinearity, anisotropy, viscoelasticity, and growth. Characteristic features of the time-dependent and anisotropic behavior are related to the properties of various components of the tissue such as fibrous collagen and elastin networks, large proteins and sugars attached to these networks, and interstitial fluid. Attempts to model the elastic behavior of these tissues based on assumptions about the behavior of the underlying constituents have been reasonably successful, but the essential addition of viscoelasticity to these models has been met with varying success. Here, a new rheological network model is proposed using, as its basis, an orthotropic hyperelastic constitutive model for fibrous tissue and a viscoelastic reptation model for soft materials. The resulting model has been incorporated into numerical and computational models, and is shown to capture the mechanical behavior of soft tissue in various modes of deformation including uniaxial and biaxial tension and simple shear.     

An inverse approach for the mechanical characterisation of vascular tissues via a generalised rule of mixtures

Mechanical factors such as stresses and strains play a major role in the growth and remodelling of soft biological tissues. The main constituents of tissue undergo different processes reacting to mechanical stimulus. Thereby, the characterisation of growth and remodelling requires an accurate estimation of the stresses and strains of their main components. Many soft tissues can be considered as composite materials and can be analysed using an appropriate rule of mixtures. Particularly, arterial tissue can be modelled as an isotropic soft matrix reinforced with preferentially oriented collagen fibres. An inverse approach to obtain the mechanical characterisation of each main component is proposed in this work. The procedure is based on a rule of mixtures raised in a finite deformation framework and generalised to include kinematics and compatibility equations for serial–parallel behaviour. This methodology allows obtaining the stress–strain relationship of the components fitting experimental data.     

Fibrils of different collagen types containing immobilised proteoglycans (PGs) as coatings: characterisation and influence on osteoblast behaviour

Collagen, the main organic component of bone, is used as a coating on titanium implants and as a scaffold material in bone tissue engineering. Surface modifications of titanium which promote osteoblast adhesion, proliferation and synthesis of collagen by osteoblasts are desirable. One biomimetic approach is the coating of titanium with collagen in fibrillar form. Other organic components of bone may be bound to fibrils and exert additional effects. In this study, the collagen types I-III were compared regarding their ability to bind the proteoglycans decorin and biglycan, which are found in bone. More collagen was bound to collagen II fibrils than to those of types I and III. Therefore, titanium surfaces were coated with fibrils of collagen type II containing biglycan or decorin or neither to investigate the effect of the proteoglycans on human primary osteoblast behaviour. In addition, the growth factor TGF-beta1 was adsorbed onto surfaces coated with fibrils of collagen type II containing biglycan or decorin or neither to investigate the influence of decorin and biglycan on the effect of TGF-beta1 on osteoblasts. Fibril-bound biglycan and decorin influence primary osteoblast behaviour by themselves. The presence of substrate-bound biglycan or decorin influences the effect of TGF-beta1. These results may be important when designing collagen-based coatings or scaffolds for tissue engineering, including those loaded with growth factors.     

The retention and ultrastructural appearances of various extracellular matrix molecules incorporated into three-dimensional hydrated collagen lattices

Artificial extracellular matrices composed of collagen, glycosaminoglycans (GAG), proteoglycans (PG), plasma fibronectin (FN), and a hyaluronate-binding protein (HABP) have been prepared that morphologically resemble embryonic extracellular matrices in vivo at the light and electron microscope level. The effect of each of the above matrix molecules on the structure and "self-assembly" of these artificial matrices was delineated. (1) Matrix components assembled in vitro morphologically resemble their counterparts in vivo, for the most part. Scanning and transmission electron microscopy indicate that under our assembly and fixation conditions, collagen forms striated fibrils that are 125 nm in diameter, FN forms 30- to 60-nm granules, chondroitin sulfate proteoglycan (CSPG) forms 27- to 37-nm granules, chondroitin sulfate (CS) assembles into 100- to 250-nm spheres, and hyaluronate (HA) appears either as granular mats when fixed with cetylpyridinium chloride (CPC) or as 1.5- to 3-nm microfibrils when preserved with ruthenium red plus tannic acid. These molecules are known to assume the same configurations in embryonic matrices when the same preservation techniques are used with the exception of FN, which generally forms fibrillar arrays. (2) Addition of various matrix molecules can radically change the appearance of the collage gels. HA greatly expands the volume of the gel and increases the space between collagen fibrils. CSPG at low concentrations (less than 1 mg/ml) and CS at high concentrations (greater than 20 mg/ml) bundle the collagen fibrils into twisted ropes. (3) A variety of assays were used to examine binding between various matrix components and retention of these components in the hydrated collagen lattices. These assays included solid-phase binding assays, negative staining of spread mixtures of matrix components, cryostat sections of unfixed mixtures of matrix components, and retention of radiolabeled matrix molecules in fixed and washed gels. A number of these binding interactions may play a role in the assembly and stabilization of the matrix. (a) HA, CSPG, and FN bind to collagen. CS appears to only weakly bind to collagen, if at all. (b) FN promotes the increased retention of HA, CSPG, and to a very small degrees, CS, in collagen gels. Conversely, the GAG increase the retention of 3H-FN in the gels. Furthermore, FN binds to HA, CS, and CSPG as demonstrated by solid surface binding assays and morphological criteria. The increased retention of GAG and CSPG by the addition of FN may be due to both stabilization of binding to the collagen and trapping of matrix complexes within the gel. (c) HA binds to both CS and CSPG.(ABSTRACT TRUNCATED AT 400 WORDS)     

Advanced Glycation End-Products Reduce Collagen Molecular Sliding to Affect Collagen Fibril Damage Mechanisms but Not Stiffness

Advanced glycation end-products (AGE) contribute to age-related connective tissue damage and functional deficit. The documented association between AGE formation on collagens and the correlated progressive stiffening of tissues has widely been presumed causative, despite the lack of mechanistic understanding. The present study investigates precisely how AGEs affect mechanical function of the collagen fibril – the supramolecular functional load-bearing unit within most tissues. We employed synchrotron small-angle X-ray scattering (SAXS) and carefully controlled mechanical testing after introducing AGEs in explants of rat-tail tendon using the metabolite methylglyoxal (MGO). Mass spectrometry and collagen fluorescence verified substantial formation of AGEs by the treatment. Associated mechanical changes of the tissue (increased stiffness and failure strength, decreased stress relaxation) were consistent with reports from the literature. SAXS analysis revealed clear changes in molecular deformation within MGO treated fibrils. Underlying the associated increase in tissue strength, we infer from the data that MGO modified collagen fibrils supported higher loads to failure by maintaining an intact quarter-staggered conformation to nearly twice the level of fibril strain in controls. This apparent increase in fibril failure resistance was characterized by reduced side-by-side sliding of collagen molecules within fibrils, reflecting lateral molecular interconnectivity by AGEs. Surprisingly, no change in maximum fibril modulus (2.5 GPa) accompanied the changes in fibril failure behavior, strongly contradicting the widespread assumption that tissue stiffening in ageing and diabetes is directly related to AGE increased fibril stiffness. We conclude that AGEs can alter physiologically relevant failure behavior of collagen fibrils, but that tissue level changes in stiffness likely occur at higher levels of tissue architecture.