Optimization of soluble human interferon-γ production in Escherichia coli using SUMO fusion partner

Interferon-γ (IFN-γ) is a broad-spectrum antiviral glycoprotein that produced by lymphatic T cells and natural killer cells those who had stimulated by antigen. Human IFN-γ (hIFN-γ) often used in clinical research and practice because of its bioactivity, for example, antivirus, antitumor, controlling cell apoptosis, and the strict selectivity. However, due to the difficulties of Escherichia coli expression system meet in protein folding, the hIFN-γ often existed as inclusion body. The production of soluble hIFN-γ can be developed to shorten the production cycle and decrease the cost. In this study, small ubiquitin-related modifier fusion technology was used to express and purify recombinant hIFN-γ. Expression induced by adding 50 mM arginine and 1 % (w/v) glycerol into the culture at 24 °C existed as a soluble form of 70 % in total protein. Finally, about 62 mg recombinant hIFN-γ was obtained from 1 L fermentation culture with no less than 96 % purity. Determined by cytopathic effect inhibition assay, the specific activity of the recombinant hIFN-γ achieved at 7.78 × 10⁵ IU/mL.     

Cytoplasmic expression of a soluble synthetic mammalian metallothionein-α domain in Escherichia coli

Bacteria are commonly used for bioremediation of heavy metal pollution and strategies to improve their performance in this respect are desirable. In this study, an Escherichia coli strain was engineered to express a common metallothionein-α domain. The metallothionein-α domain was over-expressed in the cytoplasm of E. coli as a fusion to the carboxyl terminal of maltose binding protein. The fusion protein was highly soluble in the cytoplasm of E. coli. When grown in the presence of cadmium, cells expressing the metallothionein-α fusion protein showed increased viability compared with control cells. Cells expressing the metallothionein-α also demonstrated increased accumulation of cadmium.     

Production characteristics of interferon-α using an l-arabinose promoter system in a high-cell-density culture

 Using high-cell-density culture of Escherichia coli under the control of an l-arabinose promoter (P_araB), several factors affecting the production of recombinant protein and the formation of inclusion bodies were studied. The inducer, l-arabinose, showed a maximal induction level above 10.7 mM in the final concentration. The concentration of inducer also affected the partition of interferon-α (IFN-α) into the soluble form and inclusion bodies. Induction kinetics of the rate of accumulation of IFN-α on the P_araB promoter showed a slower rate than those of other promoter systems, for example T7, lac or tac. These innate characteristics of P_araB enabled cells to grow continuously in spite of the metabolic burden induced by the expression of foreign protein. The duration time of induction could control the expression of both soluble and insoluble protein. The ratio of yeast extract to glycerol (N/C ratio) in feeding media significantly affected both the production level of recombinant protein and inclusion body formation. The reason for decreasing specific bioactivity during induction can be explained by the increased proportion of inclusion bodies in the total expressed IFN-α. Received: 21 May 1999 / Received last revision: 16 August 1999 / Accepted: 2 September 1999     

The role of the regulator-gene product (repressor) in catabolite repression of β-galactosidase synthesis in Escherichia coli

1. The specific role of the lac repressor (i-gene product) in transient catabolite repression evoked by the introduction of glucose into the medium has been investigated in Escherichia coli by using mutants of the i-gene. 2. A temperature-sensitive mutant (i(TL)) is normally inducible and demonstrates transient repression when grown at 32 degrees . At 42 degrees it is about 20% constitutive and transient catabolite repression is abolished. 3. A strain carrying an amber suppressor-sensitive mutation in the i-gene is phenotypically constitutive and also fails to show transient catabolite repression. 4. Insertion of Flaci(+) into this strain restores both inducibility and transient repression. 5. It is concluded that the i-gene product interacts with the catabolite co-repressor in such a way that its affinity for the operator is increased.     

Detection of d-amino acids in purified proteins synthesized in Escherichia coli

It has long been believed that amino acids comprising proteins of all living organisms are only of the l-configuration, except for Gly. However, peptidyl d-amino acids were observed in hydrolysates of soluble high molecular weight fractions extracted from cells or tissues of various organisms. This strongly suggests that significant amounts of d-amino acids are naturally present in usual proteins. Thus we analyzed the d-amino acid contents of His-tag-purified β-galactosidase and human urocortin, which were synthesized by Escherichia coli grown in controlled synthetic media. After acidic hydrolysis for various times at 110°C, samples were derivatized with 4-fluoro-7-nitro-2, 1, 3-benzoxadiazole (NBD-F) and separated on a reverse-phase column followed by a chiral column into d- and l-enantiomers. The contents of d-enantiomers of Ala, Leu, Phe, Val, Asp, and Glu were determined by plotting index d/(d + l) against the incubation time for hydrolysis and extrapolating the linear regression line to 0 h to eliminate the effect of racemization of amino acids during the incubation. Significant contents of d-amino acids were reproducibly detected, the d-amino acid profile being specific to an individual protein. This finding indicated the likelihood that d-amino acids are in fact present in the purified proteins. On the other hand, the d-amino acid contents of proteins were hardly influenced by the addition of d- or l-amino acids to the cultivation medium, whereas intracellular free d-amino acids sensitively varied according to the extracellular conditions. The origin of these d-amino acids detected in proteins was discussed.     

EscI: a crucial component of the type III secretion system forms the inner rod structure in enteropathogenic Escherichia coli

The T3SS (type III secretion system) is a multi-protein complex that plays a central role in the virulence of many gram-negative bacterial pathogens. This apparatus spans both bacterial membranes and transports virulence factors from the bacterial cytoplasm into eukaryotic host cells. The T3SS exports substrates in a hierarchical and temporal manner. The first secreted substrates are the rod/needle proteins which are incorporated into the T3SS apparatus and are required for the secretion of later substrates, the translocators and effectors. In the present study, we provide evidence that rOrf8/EscI, a poorly characterized locus of enterocyte effacement-encoded protein, functions as the inner rod protein of the T3SS of EPEC (enteropathogenic Escherichia coli). We demonstrate that EscI is essential for type III secretion and is also secreted as an early substrate of the T3SS. We found that EscI interacts with EscU, the integral membrane protein that is linked to substrate specificity switching, implicating EscI in the substrate-switching event. Furthermore, we showed that EscI self-associates and interacts with the outer membrane secretin EscC, further supporting its function as an inner rod protein. Overall, the results of the present study suggest that EscI is the YscI/PrgJ/MxiI homologue in the T3SS of attaching and effacing pathogens.     

Control of MarRAB Operon in Escherichia coli via Autoactivation and?Autorepression

Choice of network topology for gene regulation has been a question of interest for a long time. How do simple and more complex topologies arise? In this work, we analyze the topology of the marRAB operon in Escherichia coli, which is associated with control of expression of genes associated with conferring resistance to low-level antibiotics to the bacterium. Among the 2102 promoters in E. coli, the marRAB promoter is the only one that encodes for an autoactivator and an autorepressor. What advantages does this topology confer to the bacterium? In this work, we demonstrate that, compared to control by a single regulator, the marRAB regulatory arrangement has the least control cost associated with modulating gene expression in response to environmental stimuli. In addition, the presence of dual regulators allows the regulon to exhibit a diverse range of dynamics, a feature that is not observed in genes controlled by a single regulator.     

On the function of the various quinone species in Escherichia coli

The respiratory chain of Escherichia?coli contains three quinones. Menaquinone and demethylmenaquinone have low midpoint potentials and are involved in anaerobic respiration, while ubiquinone, which has a high midpoint potential, is involved in aerobic and nitrate respiration. Here, we report that demethylmenaquinone plays a role not only in trimethylaminooxide-, dimethylsulfoxide- and fumarate-dependent respiration, but also in aerobic respiration. Furthermore, we demonstrate that demethylmenaquinone serves as an electron acceptor for oxidation of succinate to fumarate, and that all three quinol oxidases of E.?coli accept electrons from this naphtoquinone derivative.     

Efficient biosynthesis of α-aminoadipic acid via lysine catabolism in Escherichia coli

α-Aminoadipic acid (AAA) is a nonproteinogenic amino acid with potential applications in pharmaceutical, chemical and animal feed industries. Currently, AAA is produced by chemical synthesis, which suffers from high cost and low production efficiency. In this study, we engineered Escherichia coli for high-level AAA production by coupling lysine biosynthesis and degradation pathways. First, the lysine-α-ketoglutarate reductase and saccharopine dehydrogenase from Saccharomyces cerevisiae and α-aminoadipate-δ-semialdehyde dehydrogenase from Rhodococcus erythropolis were selected by in vitro enzyme assays for pathway assembly. Subsequently, lysine supply was enhanced by blocking its degradation pathway, overexpressing key pathway enzymes and improving nicotinamide adenine dineucleotide phosphate (NADPH) regeneration. Finally, a glutamate transporter from Corynebacterium glutamicum was introduced to elevate AAA efflux. The final strain produced 2.94 and 5.64 g/L AAA in shake flasks and bioreactors, respectively. This work provides an efficient and sustainable way for AAA production.     

Introduction of a stress-responsive gene, yggG, enhances the yield of l-phenylalanine with decreased acetic acid production in a recombinant Escherichia coli

A stress-responsive gene, yggG, was introduced into an l-phenylalanine producer, Escherichia coli AJ12741. In shake-flask culture, the yggG-containing recombinant strain (named AJ12741/pHYGG) produced 6.4 g l-phenylalanine l⁻¹ at the end of culture and its yield on glucose was 0.16 g l-phenylalanine g glucose⁻¹. These values are much higher than those of the original AJ12741 strain (3.7 g l-phenylalanine l⁻¹ and 0.09 g l-phenylalanine g glucose⁻¹, respectively). On the other hand, AJ12741/pHYGG strain produced only 4.5 g acetic acid l⁻¹ and its yield on glucose was about a half of that of the AJ12741 culture. Analysis of gene expression revealed that in late growth phase, the expression levels of genes involved in acetic acid production (pta, ackA, and poxB) were relatively low in AJ12741/pHYGG cells. In particular, the level of poxB expression in AJ12741/pHYGG strains was one-seventh of that of the original strain. These results suggest that the formation of a bottleneck for acetic acid production brings about a metabolic flow favorable to l-phenylalanine synthesis in the recombinant strain over-expressing the yggG gene. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Production of interferon-α in high cell density cultures of recombinant Escherichia coli and its single step purification from refolded inclusion body proteins

Escherichia coli TG1 transformed with a temperature-regulated interferon-α expression vector was grown to high cell density in defined medium containing glucose as the sole carbon and energy source, utilizing a simple fed-batch process. Feeding was carried out to achieve an exponential increase in biomass at growth rates which minimized acetate production. Thermal induction of such high cell density cultures resulted in the production of ∼4 g interferon-α/l culture broth. Interferon-α was produced exclusively in the form of insoluble inclusion bodies and was solubilized under denaturing conditions, refolded in the presence of arginine and purified to near homogeneity, utilizing single-step ion-exchange chromatography on Q-Sepharose. The yield of purified interferon-α was ∼300 mg/l with respect to the original high cell density culture broth (overall yield of ∼7.5% active interferon-α). The purified recombinant interferon-α was found by different criteria to be predominantly monomeric and possessed a specific bioactivity of ∼2.5 × 10⁸ IU/mg based on viral cytopathic assay. Received: 8 October 1999 / Received revision: 8 December 1999 / Accepted: 12 December 1999     

Analyses of Mechanisms for Force Generation During Cell Septation in Escherichia coli

Escherichia coli is a rod-shaped bacterium that divides at its midplane, partitioning its cellular material into two roughly equal parts. At the appropriate time, a septum forms, creating the two daughter cells. Septum formation starts with the appearance of a ring of FtsZ proteins on the cell membrane at midplane. This Z-ring causes an invagination in the membrane, which is followed by growth of two new endcaps for the daughter cells. Invagination occurs against a cell overpressure of several atmospheres. A model is presented for the shape of the cell as determined by the tension in the Z-ring. This model allows the calculation of the force required for invagination. Then three possible models to generate the force necessary to achieve invagination are presented and analyzed. These models are based on converting GTP-bound FtsZ polymeric structures to GDP-bound FtsZ structures, which then leave the polymer. Each model is able to generate the force by relating the hydrolyzation to an irreversible molecular binding event, resulting in a net motion of putative anchors for the structures. All three models show that cross-linking the FtsZ protofilaments into a polymer structure allows the removal of GDP-FtsZ without interrupting the structure during force generation, as would happen for a simple polymeric chain. This work is a partially the result of an Undergraduate Research Project (OS and RT). The support of the National Science Foundation Division of Mathematical Sciences and Division of Biological Sciences through Grant DMS 0214585 and a Supplement to support Undergraduate Research in Biology and Mathematics is appreciated.