Effect of capping protein on the kinetics of actin polymerization

Acanthamoeba capping protein increased the rate of actin polymerization from monomers with and without calcium. In the absence of calcium, capping protein also increased the critical concentration for polymerization. Various models were evaluated for their ability to predict the effect of capping protein on kinetic curves for actin polymerization under conditions where the critical concentration was not changed. Several models, which might explain the increased rate of polymerization from monomers, were tested. Two models which predicted the experimental data poorly were (1) capping protein was similar to an actin filament, bypassing nucleation, and (2) capping protein fragmented filaments. Three models in which capping protein accelerated, but did not bypass, nucleation predicted the data well. In the best one, capping protein resembled a nondissociable actin dimer. Several lines of evidence have supported the idea that capping protein blocks the barbed end of actin filaments, preventing the addition and loss of monomers [Cooper, J. A., Blum, J. D., & Pollard, T. D. (1984) J. Cell Biol. 99, 217-225; Isenberg, G. A., Aebi, U., & Pollard, T. D. (1980) Nature (London) 288, 455-459]. This mechanism was also supported here by the effect of capping protein on the kinetics of actin polymerization which was nucleated by preformed actin filaments. Low capping protein concentrations slowed nucleated polymerization, presumably because capping protein blocked elongation at barbed ends of filaments. High capping protein concentrations accelerated nucleated polymerization because of capping protein's ability to interact with monomers and accelerate nucleation.     

Fesselin, a synaptopodin-like protein, stimulates actin nucleation and polymerization.

Fesselin is a proline-rich actin binding protein that has recently been isolated from smooth muscle [Leinweber, B. D., Fredricksen, R. S., Hoffman, D. R., and Chalovich, J. M. (1999) J. Muscle Res. Cell Motil. 20, 539-545]. Fesselin is similar to synaptopodin [Mundel, P., Heid, H. W., Mundel, T. M., Krüger, M., Reiser, J., and Kriz, W. (1997) J. Cell Biol. 139, 193-204] in terms of its size, isoelectric point, and sequence although synaptopodin is not present in smooth muscle. The function of fesselin is unknown. Evidence is presented here that fesselin accelerates the polymerization of actin. Fesselin was effective on actin isolated from either smooth or skeletal muscle at low ionic strength and in the presence of 100 mM KCl. At low ionic strength, fesselin decreased the time for 50% polymerization to about 1% of that in the absence of fesselin. The lag phase characteristic of the slow nucleation process of polymerization was eliminated as the fesselin concentration was increased from very low levels. Fesselin did not alter the critical concentration for actin but did increase the rate of elongation by approximately 3-fold. The increase in elongation rate constant is insufficient to account for the total increase in polymerization rate. It is likely that fesselin stabilizes the formation of actin nuclei. Time courses of actin polymerization at varied fesselin concentrations and varied actin concentrations were simulated by increasing the rate of nucleation and both the forward and reverse rate constants for elongation.     

Probing actin polymerization by intermolecular cross-linking

We have used N,N'-1,4-phenylenebismaleimide, a bifunctional sulfhydryl cross-linking reagent, to probe the oligomeric state of actin during the early stages of its polymerization into filaments. We document that one of the first steps in the polymerization of globular monomeric actin (G-actin) under a wide variety of ionic conditions is the dimerization of a significant fraction of the G-actin monomer pool. As polymerization proceeds, the yield of this initial dimer ("lower" dimer with an apparent molecular mass of 86 kD by SDS-PAGE [LD]) is attenuated, while an actin filament dimer ("upper" dimer with an apparent molecular mass of 115 kD by SDS-PAGE [UD] as characterized [Elzinga, M., and J. J. Phelan. 1984. Proc. Natl. Acad. Sci. USA. 81:6599-6602]) is formed. This shift from LD to UD occurs concomitant with formation of filaments as assayed by N-(1-pyrenyl)iodoacetamide fluorescence enhancement and electron microscopy. Isolated cross-linked LD does not form filaments, while isolated cross-linked UD will assemble into filaments indistinguishable from those polymerized from unmodified G-actin under typical filament-forming conditions. The presence of cross-linked LD does not effect the kinetics of polymerization of actin monomer, whereas cross-linked UD shortens the "lag phase" of the polymerization reaction in a concentration-dependent fashion. Several converging lines of evidence suggest that, although accounting for a significant oligomeric species formed during early polymerization, the LD is incompatible with the helical symmetry defining the mature actin filament; however, it could represent the interfilament dimer found in paracrystalline arrays or filament bundles. Furthermore, the LD is compatible with the unit cell structure and symmetry common to various types of crystalline actin arrays (Aebi, U., W. E. Fowler, G. Isenberg, T. D. Pollard, and P. R. Smith. 1981. J. Cell Biol. 91:340-351) and might represent the major structural state in which a mutant beta-actin (Leavitt, J., G. Bushar, T. Kakunaga, H. Hamada, T. Hirakawa, D. Goldman, and C. Merril. 1982. Cell. 28:259-268) is arrested under polymerizing conditions.     

Real-time measurements of actin filament polymerization by total internal reflection fluorescence microscopy

Understanding the mechanism of actin polymerization and its regulation by associated proteins requires an assay to monitor polymerization dynamics and filament topology simultaneously. The only assay meeting these criteria is total internal reflection fluorescence microscopy (Amann and Pollard, 2001; Fujiwara et al., 2002). The fluorescence signal is fourfold stronger with actin labeled on Cys-374 with Oregon green rather than rhodamine. To distinguish growth at barbed and pointed ends we used image drift correction and maximum intensity projections to reveal points where single N-ethylmaleimide inactivated myosins attach filaments to the glass coverslip. We estimated association rates at high actin concentrations and dissociation rates near and below the critical actin concentration. At the barbed end, the association rate constant for Mg-ATP-actin is 7.4 microM(-1) s(-1) and the dissociation rate constant is 0.89 s(-1). At the pointed end the association and dissociation rate constants are 0.56 microM(-1) s(-1) and 0.19 s(-1). When vitamin D binding protein sequesters all free monomers, ADP-actin dissociates from barbed ends at 1.4 s(-1) and from pointed ends at 0.16 s(-1) regardless of buffer nucleotide.     

Dictyostelium discoideum plasma membranes contain an actin-nucleating activity that requires ponticulin, an integral membrane glycoprotein

In previous equilibrium binding studies, Dictyostelium discoideum plasma membranes have been shown to bind actin and to recruit actin into filaments at the membrane surface. However, little is known about the kinetic pathway(s) through which actin assembles at these, or other, membranes. We have used actin fluorescently labeled with N-(1- pyrenyl)iodoacetamide to examine the kinetics of actin assembly in the presence of D. discoideum plasma membranes. We find that these membranes increase the rate of actin polymerization. The rate of membrane-mediated actin polymerization is linearly dependent on membrane protein concentrations up to 20 micrograms/ml. Nucleation (the association of activated actin monomers into oligomers) appears to be the primary step of polymerization that is accelerated. A sole effect on the initial salt-induced actin conformational change (activation) is ruled out because membranes accelerate the polymerization of pre- activated actin as well as actin activated in the presence of membranes. Elongation of preexisting filaments also is not the major step of polymerization facilitated by membranes since membranes stripped of all peripheral components, including actin, increase the rate of actin assembly to about the same extent as do membranes containing small amounts of endogenous actin. Acceleration of the nucleation step by membranes also is supported by an analysis of the dependence of polymerization lag time on actin concentration. The barbed ends of membrane-induced actin nuclei are not obstructed by the membranes because the barbed end blocking agent, cytochalasin D, reduces the rate of membrane-mediated actin nucleation. Similarly, the pointed ends of the nuclei are not blocked by membranes since the depolymerization rate of gelsolin-capped actin is unchanged in the presence of membranes. These results are consistent with previous observations of lateral interactions between membranes and actin filaments. These results also are consistent with two predictions from a model based on equilibrium binding studies; i.e., that plasma membranes should nucleate actin assembly and that membrane-bound actin nuclei should have both ends free (Schwartz, M. A., and E. J. Luna. 1988. J. Cell Biol. 107:201-209). Integral membrane proteins mediate the actin nucleation activity because activity is eliminated by heat denaturation, treatment with reducing agents, or proteolysis of membranes. Activity also is abolished by solubilization with octylglucoside but is reconstituted upon removal or dilution of the detergent. Ponticulin, the major actin-binding protein in plasma membranes, appears to be necessary for nucleation activity since activity is not reconstituted from detergent extracts depleted of ponticulin.     

Rate constants for the reactions of ATP- and ADP-actin with the ends of actin filaments

I measured the rate of elongation at the barbed and pointed ends of actin filaments by electron microscopy with Limulus sperm acrosomal processes as nuclei. With improvements in the mechanics of the assay, it was possible to measure growth rates from 0.05 to 280 s-1. At 22 degrees C in 1 mM MgCl2, 10 mM imidazole (pH 7), 0.2 mM ATP with 1 mM EGTA or 50 microM CaCl2 or with EGTA and 50 mM KCl, the elongation rates at both ends have a linear dependence on the ATP-actin concentration from the critical concentration to 20 microM. Consequently, over a wide range of subunit addition rates, the rate constants for association and dissociation of ATP-actin are constant. This shows that the nucleotide composition at or near the end of the growing filament is either the same over this range of growth rates or has no detectable effect on the rate constants. Under conditions where polymerization is fastest (MgCl2 + KCl + EGTA) the rate constants have these values: (table; see text) Compared with ATP-actin, ADP-actin associates slower at both ends, dissociates faster from the barbed end, but dissociates slower from the pointed end. Taking into account the events at both ends, these constants and a simple Oosawa-type model account for the complex three-phase dependence of the rate of polymerization in bulk samples on the concentration of ATP-actin monomers observed by Carlier, M.-F., D. Pantaloni, and E. D. Korn (1985, J. Biol. Chem., 260:6565-6571). These constants can also be used to predict the reactions at steady state in ATP. There will be slow subunit flux from the barbed end to the pointed end. There will also be minor fluctuations in length at the barbed end due to occasional rapid dissociation of strings of ADP subunits but the pointed end will be relatively stable.     

Kinetics of actin elongation and depolymerization at the pointed end

We measured the rate of elongation at the pointed filament end with increasing concentrations of G-actin [J(c) function] using villin-capped actin filaments of very small (actin/villin = 3, VA3) and relatively large size (actin/villin = 18, VA18) as nuclei for elongation. The measurements were made under physiological conditions in the presence of both Mg2+ and K+. In both cases the J(c) function was nonlinear. In contrast to the barbed filament end, however, the slope of the J(c) function sharply decreased rather than increased when the monomer concentration was lowered to concentrations near and below the critical concentration c infinity. At zero monomer concentration, depolymerization at the pointed end was very slow with a rate constant of 0.02 s-1 for VA18. When VA3 was used, the nonlinearity of the J(c) function was greatly exaggerated, and the nuclei elongated at actin concentrations below the independently measured critical concentration for the pointed end. This is consistent with and confirms our previous finding [Weber, A., Northrop, J., Bishop, M. F., Ferrone, F. A., & Mooseker, M. S. (1987) Biochemistry (preceding paper in the issue)] that at an actin-villin ratio of 3 a significant fraction of the villin is free and that a series of steady states exist between villin-actin complexes of increasing size and G-actin. The rate constant of elongation seems to increase with increasing G-actin concentrations because of increasing conversion of free villin into villin-actin oligomers during the period of the measurement of the initial elongation rate. The villin-actin oligomers have a much higher rate constant of actin binding than does free villin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Profilin-actin complexes directly elongate actin filaments at the barbed end.

We demonstrate that the profilin-G-actin complex can elongate actin filaments directly at the barbed end but cannot bind to the pointed end. During elongation, the profilin-actin complex binds to the barbed filament end, whereupon profilin is released, leaving the actin molecule behind. This was first proposed by Tilney [Tilney, L. G., et al. (1983) J. Cell Biol. 97, 112-124] and demonstrated by Pollard and Cooper [(1984) Biochemistry 23, 6631-6641] by electron microscopy. We show that a model without any outside energy supply, in contrast to the mechanism proposed by Pollard and Cooper, can be fitted to our and their [Kaiser et al. (1986) J. Cell Biol. 102, 221-226] findings. Input of outside energy is necessary only if profilin-mediated elongation continues after free G-actin has been lowered to or below the critical concentration observed at the barbed end in the absence of profilin.     

Physical, immunochemical, and functional properties of Acanthamoeba profilin

Acanthamoebe profilin has a native molecular weight of 11,700 as measured by sedimentation equilibrium ultracentrifugation and an extinction coefficient at 280 nm of 1.4 X 10(4) M-1cm-1. Rabbit antibodies against Acanthamoeba profilin react only with the 11,700 Mr polypeptide among all other ameba polypeptides separated by electrophoresis. These antibodies react with a 11,700 Mr polypeptide in Physarum but not with any proteins of Dictyostelium or Naeglaria. Antibody-binding assays indicate that approximately 2% of the ameba protein is profilin and that the concentration of profilin is approximately 100 mumol/liter cells. During ion exchange chromatography of soluble extracts of Acanthamoeba on DEAE-cellulose, the immunoreactive profilin splits into two fractions: an unbound fraction previously identified by Reichstein and Korn (1979, J. Biol. Chem., 254:6174-6179) and a tightly bound fraction. Purified profilin from the two fractions is identical by all criteria tested. The tightly bound fraction is likely to be attached indirectly to the DEAE, perhaps by association with actin. By fluorescent antibody staining, profilin is distributed uniformly throughout the cytoplasmic matrix of Acanthamoeba. In 50 mM KCl, high concentrations of Acanthamoeba profilin inhibit the elongation rate of muscle actin filaments measured directly by electron microscopy, but the effect is minimal in KCl with 2 MgCl2. By using the fluorescence change of pyrene-labeled Acanthamoeba actin to assay for polymerization, we confirmed our earlier observation (Tseng, P. C.-H., and T. D. Pollard, 1982, J. Cell Biol. 94:213-218) that Acanthamoeba profilin inhibits nucleation much more strongly than elongation under physiological conditions.     

Impact of profilin on actin-bound nucleotide exchange and actin polymerization dynamics

We have investigated the effects of profilin on nucleotide binding to actin and on steady state actin polymerization. The rate constants for the dissociation of ATP and ADP from monomeric Mg-actin at physiological conditions are 0.003 and 0.009 s-1, respectively. Profilin increases these dissociation rate constants to 0.08 s-1 for MgATP-actin and 1.4 s-1 for MgADP-actin. Thus, profilin can increase the rate of exchange of actin-bound ADP for ATP by 140-fold. The affinity of profilin for monomeric actin is found to be similar for MgATP-actin and MgADP-actin. Continuous sonication was used to allow study of solutions having sustained high filament end concentrations. During sonication at steady state, F-actin depolymerizes toward the critical concentration of ADP-actin [Pantaloni, D., et al. (1984)J. Biol. Chem. 259, 6274-6283], our analysis indicates that under these conditions a significant number of filaments contain terminal ADP-actin subunits. Addition of profilin to this system increases the polymer concentration and increases the steady state ATPase activity during sonication. These data are explained by the fast exchange of ATP for ADP on the profilin-ADP-actin complex, resulting in rapid ATP-actin regeneration. An important function of profilin may be to provide the growing ends of filaments with ATP-actin during periods when the monomer cycling rate exceeds the intrinsic nucleotide exchange rate of monomeric actin.     

Polymerization of ADP-actin and ATP-actin under sonication and characteristics of the ATP-actin equilibrium polymer

Polymerization under sonication has been developed as a new method to study the rapid polymerization of actin with a large number of elongating sites. The theory proposed assumes that filaments under sonication are maintained at a constant length by the constant input of energy. The data obtained for the reversible polymerization of ADP-actin under sonication have been successfully analyzed according to the proposed model and, therefore, validate the model. The results obtained for the polymerization of ATP-actin under sonication demonstrate the involvement of ATP hydrolysis in the polymerization process. At high actin concentration, polymerization was fast enough, as compared to ATP hydrolysis on the F-actin, to obtain completion of the reversible polymerization of ATP-actin before significant hydrolysis of ATP occurred. A critical concentration of 3 microM was determined as the ratio of the dissociation and association rate constants for the interaction of ATP-actin with the ATP filament ends in 1 mM MgCl2, 0.2 mM ATP. The plot of the rate of elongation of filaments versus actin monomer concentration exhibited an upward deviation at high actin concentration that is consistent with this result. The fact that F-actin at steady state is more stable than the ATP-F-actin polymer at equilibrium suggests that the interaction between ADP-actin and ATP-actin subunits at the end of the ATP-capped filament is much stronger than the interaction between two ATP-actin subunits.     

Ca2+ control of actin filament length. Effects of macrophage gelsolin on actin polymerization

Gelsolin complexes with calcium (gelsolin-Ca2+) binds to the ends of actin filaments to which monomers add preferentially during elongation. It forms a stable complex with actin in a low ionic strength solution which does not normally favor the polymerization of actin. Gelsolin-Ca2+ increases the rate of nucleation of actin which precedes polymerization, but decreases the rate of elongation of the filaments. The final average length of filaments formed in the presence of gelsolin-Ca2+ is shorter and the equilibrium monomer concentration increases relative to actin polymerized in the absence of gelsolin-Ca2+. Gelsolin-Ca2+ also increases the number of actin filaments because the magnitude of the increase in monomer concentration is disproportionately small compared with the reduction in polymer length. In these respects, the population of actin filaments formed during polymerization in the presence of gelsolin-Ca2+ is similar to that resulting from the action of gelsolin on previously assembled actin filaments (Yin, H. L., Zaner, K. S., and Stossel, T. P. (1980) J. Biol. Chem. 255, 9494-9500). The calcium-dependent shortening of ects, the population of actin filaments formed during polymerization in the presence of gelsolin-Ca2+ is similar to that resulting from the action of gelsolin on previously assembled actin filaments (Yin, H. L., Zaner, K. S., and Stossel, T. P. (1980) J. Biol. Chem. 255, 9494-9500). The calcium-dependent shortening of ects, the population of actin filaments formed during polymerization in the presence of gelsolin-Ca2+ is similar to that resulting from the action of gelsolin on previously assembled actin filaments (Yin, H. L., Zaner, K. S., and Stossel, T. P. (1980) J. Biol. Chem. 255, 9494-9500). The calcium-dependent shortening of actin filaments is the primary mechanism for the dissolution of an actin gel by gelsolin. Therefore, the ability of gelsolin to produce short filaments irrespective of the initial state of assembly of the actin offers flexibility for controlling the network structure of the cytoplasm in which either the monomeric or polymeric form of actin molecules might predominate at different times.     

Acanthamoeba myosin-II minifilaments assemble on a millisecond time scale with rate constants greater than those expected for a diffusion limited reaction

We have shown previously that Acanthamoeba myosin-II minifilaments assemble by three successive dimerization steps, forming, progressively, monomers, antiparallel dimers, antiparallel tetramers, and finally the full size octameric minifilament (Sinard, J. H., Stafford, W. F., and Pollard, T. D. (1989) J. Cell Biol. 109, 1537-1548). In the current study, we investigate the kinetics of the assembly of these minifilaments, initiating assembly by the rapid dilution of salt in a stopped-flow light scattering apparatus. The majority of the reaction is completed within 50 ms and is greater than 90% completed within 1 s. Assembly data over a greater than 6-fold myosin concentration range can be fit using the successive dimerization mechanism with a single set of rate constants. Second order rate constants for the initial steps in the assembly reaction exceed 10(8) M-1 s-1, and equilibrium dissociation constants predict a very low critical concentration, consistent with previous data. Other possible assembly mechanisms do not adequately fit all of the available data. Filament disassembly at 300 mM KCl is even more rapid, and there is both an increase in the dissociation rate constants and a decrease in the association rate constants with increasing KCl. Aggregation of minifilaments induced by Mg2+ is much slower and takes many minutes to reach equilibrium.     

Peering deeply inside the branch

The actin-related protein 2/3 (Arp2/3) story has captivated the cytoskeleton community for over a decade. Not only does this complex nucleate new actin filaments, but it also anchors them into a dendritic meshwork that is used in many cellular contexts such as lamellipodial protrusion, endosome rocketing, and the movement of pathogens. One key piece of this puzzle that has been missing is a detailed structure of the Arp2/3-actin branch. Using electron tomography and computational docking, Rouiller et al. (Rouiller, I., X.-P. Xu, K.J. Amann, C. Egile, S. Nickell, D. Nicastro, R. Li, T.D. Pollard, N. Volkmann, and D. Hanein. 2008. J. Cell Biol. 180:887-895) present an elegant and intriguing structure of the Arp2/3 complex-mediated actin branch.     

Study of a protein complex from the brain which reduces actin viscosity. II. The complex inhibits elongation of actin filaments at the end preferable for polymerization and fragments the filaments

Functional properties of the protein complex from bovine brain that shortens actin filaments are described. In the presence of Ca2+ complex shortens actin filaments and increases the initial rate of actin polymerization. In the absence of free calcium ions the complex loses its accelerating effect on actin polymerization, but still possesses actin filament shortening activity. Neither phalloidin nor tropomyosin prevent the shortening of actin filaments induced by the protein complex. Therefore the protein complex causes the fragmentation of actin filament. The data on actin polymerization in the presence of F-actin nuclei have indicated that the protein complex inhibits the elongation step of actin polymerization. The analysis of elongation in the presence of both the protein complex and cytochalasin D has demonstrated that the inhibition occurs on the fast-growing end of actin filaments.     

Purification and characterization of an Acanthamoeba nuclear actin-binding protein

Immunolocalization of monoclonal antibodies to Acanthamoeba myosin I showed a cross-reactive protein in nuclei (Hagen, S. J., D. P. Kiehart, D. A. Kaiser, and T. D. Pollard. 1986. J. Cell Biol. 103:2121-2128). This protein is antigenically related to myosin I in that nine monoclonal antibodies and three polyclonal antibodies are cross-reactive. However, studies with affinity-purified antibodies and two-dimensional peptide maps show that the protein is not a proteolytic product of myosin I. We have used cell fractionation and column chromatography to purify this protein. It is a dimer of 34-kD polypeptides with a Stokes' radius of 4 nm. A polyclonal antisera generated against the purified protein confirms the nuclear localization seen with the cross-reactive monoclonal antibodies. The 34-kD protein binds actin filaments in an ATP-insensitive manner with a Kd of approximately 0.25 microM without cross-linking, severing, or capping. No ATPase activity was detected in the presence or absence of actin. It also binds to DNA. These unique properties suggest we have discovered a new class of actin-binding protein. We have given this protein the name NAB for "nuclear actin-binding" protein.     

Organization of actin in the leading edge of cultured cells: influence of osmium tetroxide and dehydration on the ultrastructure of actin meshworks

The ordered structure of the leading edge (lamellipodium) of cultured fibroblasts is readily revealed in cells extracted briefly in Triton X- 100-glutaraldehyde mixtures, fixed further in glutaraldehyde, and then negatively stained for electron microscopy. By this procedure, the leading edge regions show a highly organised, three-dimensional network of actin filaments together with variable numbers of radiating actin filament bundles or microspikes. The use of Phalloidin after glutaraldehyde fixation resulted in a marginal improvement in filament order. Processing of the cytoskeletons though the additional steps generally employed for conventional electron microscopy resulted in a marked deterioration or complete disruption of the order of the actin filament networks. In contrast, the actin filaments of the stress fiber bundles were essentially unaffected. Thus, postfixation in osmium tetroxide (1% for 7 min at room temperature) transformed the networks to a reticulum of kinked fibers, resembling those produced by the exposure of muscle F-actin to OsO4 in vitro (P. Maupin-Szamier and T. D. Pollard. 1978. J. Cell Biol. 77:837--852). While limited exposure to OsO4 (0.2+ for 20 min at 0 degrees C) obviated this destruction, dehydration in acetone or ethanol, with or without post-osmication, caused a further and unavoidable disordering and aggregation of the meshwork filaments. The meshwork regions of the leading edge then showed a striking resemblance to the networks hitherto described in critical point-dried preparations of cultured cells. I conclude that much of the "microtrabecular lattice" described by Wolosewick and Porter (1979. J. Cell Biol. 82:114--139) in the latter preparations constitutes actin meshworks and actin filament arrays, with their associated components, that have been distorted and aggregated by the preparative procedures employed.     

Mechanism of action of phalloidin on the polymerization of muscle actin

Under conditions where muscle actin only partially polymerizes, or where it does not polymerize at all, a significant enhancement of polymerization was observed if equimolar phalloidin was also present. The increased extent of polymerization in the the presence of phalloidin can be explained by the reduced critical actin concentration of partially polymerized populations at equilibrium. Under such conditions, the rate of polymerization, as judged by the length of time to reach half the viscosity plateau, was found to be essentially independent of the phalloidin concentration. Moreover, the initial rate of polymerization of actin was also found to be independent of phalloidin concentration. However, phalloidin apparently causes a reduction in the magnitude of the reverse rates in the polymerization reaction, as was demonstrated by the lack of depolymerization of phalloidin-treated actin polymers. This effect of phalloidin is also supported by the identification of actin nuclei and short polymers in populations of G-actin incubated with phalloidin in the absence of added KCl. Our conclusion, then, is that phalloidin influences the polymerization of actin by stabilizing nuclei and polymers as they are formed.     

ADP-ribosylated actin caps the barbed ends of actin filaments

The mode of action on actin polymerization of skeletal muscle actin ADP-ribosylated on arginine 177 by perfringens iota toxin was investigated. ADP-ribosylated actin decreased the rate of nucleated actin polymerization at substoichiometric ratios of ADP-ribosylated actin to monomeric actin. ADP-ribosylated actin did not tend to copolymerize with actin. Actin filaments were depolymerized by the addition of ADP-ribosylated actin. The maximal monomer concentration reached by addition of ADP-ribosylated actin was similar to the critical concentration of the pointed ends of actin filaments. ADP-ribosylated actin had no effect on the rate of polymerization of gelsolin-capped actin filaments which polymerize at the pointed ends. The results suggest that ADP-ribosylated actin acts as a capping protein which binds to the barbed ends of actin filaments to inhibit polymerization. Based on an analysis of the depolymerizing effect of ADP-ribosylated actin, the equilibrium constant for binding of ADP-ribosylated actin to the barbed ends of actin filaments was determined to be about 10(8) M-1. As actin is ADP-ribosylated by perfringens iota toxin and by botulinum C2 toxin, it appears that conversion of actin into a capping protein by ADP-ribosylation is a pathophysiological reaction catalyzed by bacterial toxins which ultimately leads to inhibition of actin assembly.     

Gamma-Actinin, a new regulatory protein from rabbit skeletal muscle. II. Action on actin.

The interaction of gamma-actinin and actin was investigated under various conditions. It has been shown that gamma-actinin affects the G-F transformation of actin, causing an increase in the number of actin monomers required to form a nucleus in the initial step of polymerization. Sonicated fragments of F-actin and heavy meromyosin caused the immediate polymerization of actin under the influence of gamma-actinin. Therefore, it can be concluded that gamma-actinin inhibits the nucleation step of G-F transformation. Actin filaments which were formed in the presence of gamma-actinin (F-actin) were shown to possess certain characteristic properties when compared with control F-actin. These were as follows: F-actin solution had a high critical concentration; F-actin showed a high rate of depolymerization; the flow birefringence of F-actin decreased with time upon incubation in the absence of free ATP; finally, F-actin was demonstrated to have ATP-splitting activity. These dynamic features of F-actin were accounted for in terms of an increase in the rate constant of depolymerization in F-actin under the influence of gamma-actinin.