Lipoteichoic Acids from Streptococcus sanguis

Two lipoteichoic acids, membrane (MLTA) and wall (WLTA), have been purified from Streptococcus sanguis by Sepharose and Ecteola-cellulose column chromatographies and concanavalin A-conjugated Sepharose affinity column chromatography. The teichoic acids were homogenous as judged by disc gel electrophoresis, column chromatography, and double diffusion tests. Both MLTA and WLTA consisted of glycerol, phosphate, glucose, and fatty acids in the ratios of 0.95:1:0.71:0.046 and 0.99:1:0.79:0.023, respectively. alpha-Glycerol-phosphate was obtained by the partial acid hydrolysis of the lipoteichoic acids suggesting that their backbone structure consists of the glycerol moieties linked by 1, 3-phosphodiester bonds. Both WLTA and MLTA form aggregates, perhaps due to micelle formation, in concentrated solution. The aggregate form of MLTA dissociates to a much greater extent than that of WLTA under similar conditions.     

Complete structure of the polysaccharide from Streptococcus sanguis J22

The cell wall polysaccharides of certain oral streptococci such as Streptococcus sanguis strains 34 and J22, although immunologically distinct, act as receptors for the fimbrial lectins of Actinomyces viscosus T14V. We report the complete covalent structure of the polysaccharide from S. sanguis J22 which is composed of a heptasaccharide subunit linked by phosphodiester bonds. The repeating subunit, which contains alpha-GalNAc, alpha-rhamnose, beta-rhamnose, beta-glucose, and beta-galactose all in the pyranoside form and beta-galactofuranose, is compared with the previously published structure of the polysaccharide from strain 34. The structure has been determined almost exclusively by high-resolution nuclear magnetic resonance methods. The 1H and 13C NMR spectra of the polysaccharides from both strains 34 and J22 have been completely assigned. The stereochemistry of pyranosides was assigned from JH-H values determined from phase-sensitive COSY spectra, and acetamido sugars were assigned by correlation of the resonances of the amide 1H with the sugar ring protons. The 13C spectra were assigned by 1H-detected multiple-quantum correlation (HMQC) spectra, and the assignments were confirmed by 1H-detected multiple-bond correlation (HMBC) spectra. The positions of the glycosidic linkages were assigned by detection of three-bond 1H-13C correlation across the glycosidic linkage in the HMBC spectra. The positions of the phosphodiester linkages were determined by splittings observed in the 13C resonances due to 31P coupling and also by 1H-detected 31P correlation spectroscopy.     

Isolation of a coaggregation-inhibiting cell wall polysaccharide from Streptococcus sanguis H1.

Coaggregation between Streptococcus sanguis H1 and Capnocytophaga ochracea ATCC 33596 cells is mediated by a carbohydrate receptor on the former and an adhesin on the latter. Two methods were used to release the carbohydrate receptor from the gram-positive streptococcus, autoclaving and mutanolysin treatment. The polysaccharide released from the streptococcal cell wall by either treatment was purified by ion-exchange chromatography; this polysaccharide inhibited coaggregation when preincubated with the gram-negative capnocytophaga partner. After hydrolysis of the polysaccharide by hydrofluoric acid (HF), the major oligosaccharide of the polysaccharide was purified by high-performance liquid chromatography. By analysis of the HF hydrolysis of the polysaccharide and the purified oligosaccharide, this major oligosaccharide appeared to be the repeating unit of the polysaccharide, with minor components resulting from internal hydrolysis of the major oligosaccharide. Gas chromatography results showed that the oligomer was a hexasaccharide, consisting of rhamnose, galactose, and glucose, in the ratio of 2:3:1, respectively. By weight, the purified hexasaccharide was a fourfold-more-potent inhibitor of coaggregation than the native polysaccharide. Resistance to hydrolysis by sulfuric acid alone and susceptibility to hydrolysis by HF suggested that oligosaccharide chains of the polysaccharide are linked by phosphodiester bonds. Studies with a coaggregation-defective mutant of S. sanguis H1 revealed that the cell walls of the mutant contained neither the polysaccharide nor the hexasaccharide repeating unit. The purification of both a polysaccharide and its constituent hexasaccharide repeating unit, which both inhibited coaggregation, and the absence of this polysaccharide or hexasaccharide on a coaggregation-defective mutant strongly suggest that the hexasaccharide derived from the polysaccharide functions as the receptor for the adhesin from C. ochracea ATCC 33596.     

Complete structure of the adhesin receptor polysaccharide of Streptococcus oralis ATCC 55229 (Streptococcus sanguis H1).

This report describes the determination of the complete primary structure of the adhesin receptor polysaccharide of Streptococcus oralis ATCC 55229 (previously characterized as Streptococcus sanguis H1), a Gram-positive bacteria implicated in dental plaque formation. The polysaccharide was isolated from S. oralis ATCC 55229 cells after deproteination, enzymatic hydrolysis, and ion exchange chromatography. It was shown to consist of rhamnose, galactose, glucose, glycerol, and phosphate, in molar ratios of 2:3:1:1:1. Sequence and linkage assignments of the glycosyl residues were obtained by methylation analysis followed by gas-liquid chromatography and electron-impact mass spectrometry. 31P NMR spectroscopy revealed that phosphate was present in a diester, connecting glycerol to one of the galactosyl residues. High-performance liquid chromatography of a partial acid hydrolysate of the polysaccharide confirmed this finding by showing galactose 6-phosphate and glycerol 1-phosphate. The structural determination was completed by the combination of two-dimensional homonuclear Hartmann-Hahn and NOE experiments and heteronuclear [1H,13C] and [1H,31P] multiple-quantum coherence experiments. Thus, the adhesin receptor polysaccharide of S. oralis ATCC 55229 was found to be a polymer composed of hexasaccharide repeating units that contain glycerol linked through a phosphodiester to C6 of the alpha-galactopyranosyl residue and are joined end-to-end through galactofuranosyl-beta(1-->3)-rhamnopyranosyl linkages: [formula: see text] This structure is novel among bacterial cell surface polysaccharides in general and specifically among those implicated in dental plaque formation.     

Biosynthesis of oligosaccharide-lipid in Streptococcus sanguis

An oligosaccharide-lipid containing N-acetyl d-glucosamine (GlcNAc), l-rhamnose, and d-glucose was synthesized when the particulate enzyme from Streptococcus sanguis was incubated with UDP-GlcNAc, TDP-rhamnose, and UDP-glucose. The incorporation of d-glucose into the lipid was dependent on the preincorporation of l-rhamnose, which in turn was dependent on that of GlcNAc. This indicates that the order of sugar incorporation is GlcNAc, l-rhamnose, and d-glucose. The synthesis of GlcNAc-lipid was stimulated twofold by ATP and was inhibited strongly by UDP and slightly by UMP, CDP, and TDP, but not by all other nucleoside diphosphates and nucleoside monophosphates tested. A [gamma-(32)P]ATP labeling experiment indicated that some acceptor lipid was present in nonphosphorylated form. The acid and alkaline stabilities of the GlcNAc-lipid were similar to those of glycosyl undecaprenylphosphate, and the thin-layer chromatographic mobility of the lipid was slightly faster than that of the mannosylphosphorylundecaprenol. The molar ratio of phosphate to GlcNAc in purified GlcNAc-lipid was found to be 0.96:1. These results suggested that the GlcNAc was attached to the lipid moiety, presumably undecaprenol, by phosphodiester bonds. The incorporation of l-rhamnose into the lipid was inhibited by UDP and UMP, respectively, in a manner similar to the incorporation of GlcNAc. This suggested that the oligosaccharide was also linked to the lipid moiety by phosphodiester bonds.     

Rapid small-scale preparation method of cell surface polysaccharides

A rapid small-scale method of extraction of lipopolysaccharide (LPS) and capsular polysaccharides was developed for the purpose of identification of chemotypes of LPS and serotypes of capsular antigens. Cell surface polysaccharides were prepared within less than 2 hr from 1.5 ml of broth or suspension of colonies cultured overnight. The preparations were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis for LPS, and by double diffusion gel precipitation (Ouchterlony) test and blotting to nitrocellulose membrane for capsular polysaccharide. The analyses with the preparations obtained by the method could provide adequate results capable of identifying chemotypes of LPS and serotypes of capsular antigens.     

The biosynthesis of l-rhamnose of plum-leaf polysaccharides.

1. The utilization of d-[1-(14)C]- and d-[6-(14)C]-glucose in the biosynthesis of l-rhamnose units of plum-leaf polysaccharides has been studied. 2. After the precursors had been metabolized in the leaves, polysaccharide fractions were prepared therefrom and the constituent l-rhamnose was isolated and purified. 3. Both the specific activity and the distribution of (14)C along the carbon chain of l-rhamnose from two polysaccharide fractions from each experiment were determined. 4. The results indicated a close affinity between l-rhamnose and pectin, and show that biosynthesis of the 6-deoxyhexose from d-glucose occurs in the main without scission or inversion of the carbon chain. 5. A degradation scheme for l-rhamnose via l-rhamnitol was described which gives the labelling at C-1, C-2+C-3+C-4,C-5 and C-6 on a 0.3millimole scale.     

Enzymatic fingerprinting of Arabidopsis pectic polysaccharides using polysaccharide analysis by carbohydrate gel electrophoresis (PACE)

Plant cell wall polysaccharides vary in quantity and structure between different organs and during development. However, quantitative analysis of individual polysaccharides remains challenging, and relatively little is known about any such variation in polysaccharides in organs of the model plant Arabidopsis thaliana. We have analysed plant cell wall pectic polysaccharides using polysaccharide analysis by carbohydrate gel electrophoresis. By highly specific enzymatic digestion of a polysaccharide in a cell wall preparation, a unique fingerprint of short oligosaccharides was produced. These oligosaccharides gave quantitative and structural information on the original polysaccharide chain. We analysed enzyme-accessible polygalacturonan (PGA), linear β(1,4) galactan and linear α(1,5) arabinan in several organs of Arabidopsis: roots, young leaves, old leaves, lower and upper inflorescence stems, seeds and callus. We found that this PGA constitutes a high proportion of cell wall material (CWM), up to 15% depending on the organ. In all organs, between 60 and 80% of the PGA was highly esterified in a blockwise fashion, and surprisingly, dispersely esterified PGA was hardly detected. We found enzyme-accessible linear galactan and arabinan are both present as a minor polysaccharide in all the organs. The amount of galactan ranged from ~0.04 to 0.25% of CWM, and linear arabinan constituted between 0.015 and 0.1%. Higher levels of galactan correlated with expanding tissues, supporting the hypothesis that this polysaccharide is involved in wall extension. We show by analysis of mur4 that the methods and results presented here also provide a basis for studies of pectic polysaccharides in Arabidopsis mutants.     

Polysaccharide analysis using carbohydrate gel electrophoresis: a method to study plant cell wall polysaccharides and polysaccharide hydrolases.

A method to characterize plant cell wall polysaccharides is presented. The complexity of the polymer structures and the large number of different charged and uncharged monosaccharides that make up plant polysaccharides have previously made analysis technically demanding and laborious. Polysaccharide analysis using carbohydrate gel electrophoresis (PACE) relies on derivatization of reducing ends of sugars and oligosaccharides with a fluorophore, followed by electrophoresis under optimized conditions in polyacrylamide gels. We show that PACE is a sensitive and simple tool for studying the monosaccharide composition of polysaccharides and of cell wall preparations. In combination with specific hydrolases, it can be used to analyze the structure of polysaccharides. Moreover, the specificity and kinetics of the plant polysaccharide hydrolases themselves can be quickly and effectively studied. PACE can detect as little as 500 fmol of monosaccharides and 100 fmol of oligosaccharides, and it is fast and quantitative.     

A polysaccharide from Streptococcus sanguis 34 that inhibits coaggregation of S. sanguis 34 with Actinomyces viscosus T14V.

Coaggregation between Actinomyces viscosus T14V and Streptococcus sanguis 34 depends on interaction of a lectin on A. viscosus T14V with a cell surface carbohydrate on S. sanguis 34. This carbohydrate was isolated, and its chemical makeup was established. The carbohydrate remained attached to S. sanguis 34 cells through extraction with Triton X-100 and treatment with pronase. It was cleaved from the cell residue by autoclaving and purified by differential centrifugation and column chromatography on DEAE-Sephacel and Sephadex G-75. The polysaccharide contained phosphate which was neither inorganic nor monoester. Treatment with NaOH-NaBH4, followed by Escherichia coli alkaline phosphatase, or with 48% HF at 4 degrees C, followed by NaBH4, yielded inorganic phosphate and oligosaccharide alditols. Therefore, the polysaccharide is composed of oligosaccharide units joined together by phosphodiester bridges. The structure and stereochemistry of the main oligosaccharide alditol was established previously (F. C. McIntire, C. A. Bush, S.-S. Wu, S.-C. Li, Y.-T. Li, M. McNeil, S. Tjoa, and P. V. Fennessey, Carbohydr. Res. 166:133-143). Permethylation analysis, 1H and 31P nuclear magnetic resonance studies on the whole polysaccharide revealed the position of the phosphodiester linkages. The polysaccharide is mainly a polymer of (6) GalNAc(alpha 1-3)Rha(beta 1-4)Glc(beta 1-6)Galf(beta 1-6)GalNAc(beta 1- 3)Gal(alpha 1)-OPO3. It reacted as a single antigen with antiserum to S. sanguis 34 cells and was a potent inhibitor of coaggregation between A. viscosus T14V and S. sanguis 34. Quantitative inhibition of precipitation assays with oligosaccharides, O-allyl N-acetylgalactosaminides, and simple sugars indicated that specific antibodies were directed to the GalNAc end of the hexasaccharide unit. In contrast, coaggregation was inhibited much more effectively by saccharides containing betaGalNAc. Thus, the specificity of the A. viscosus T14V lectin is strikingly different from that of antibodies directed against the S. sanguis 34 polysaccharide.     

Phospholipid substitution of capsular polysaccharides and mechanisms of capsule formation in Neisseria meningitidis

Within the capsule gene complex (cps) of Neisseria meningitidis two functional regions B and C are involved in surface translocation of the cytoplasmically synthesized capsular polysaccharide, which is a homopolymer of α-2,8 polyneuraminic acid. The region-C gene products share characteristics with transporter proteins of the ABC (ATP-binding cassette) superfamily of active transporters. For analysis of the role of region B in surface translocation of the capsular polysaccharide we purified the polysaccharides of region B- and region C-defective Escherichia coli clones by affinity chromatography. The molecular weights of the polysaccharides were determined by gel filtration and the polysaccharides were analysed for phospholipid substitution by polyacrylamide gel electrophoresis and immunoblotting. The results indicate that the full-size capsular polysaccharide with a phospholipid anchor is synthesized intracellularly and that lipid modification is a strong requirement for translocation of the poly saccharide to the cell surface. Proteins encoded by region B are involved in phospholipid substitution of the capsular polysaccharide. Nucleotide sequence analysis of region B revealed two open reading frames, which encode proteins with molecular masses of 45.1 and 48.7 kDa.     

PURIFICATION OF BOVINE PINEAL HYDROXYINDOLE O-methylTRANSFERASE BY IMMUNOADSORPTION CHROMATOGRAPHY

A procedure is described for the use of immunoadsorption chromatography of hydroxyindole O-methyltransferase (HIOMT). HIOMT was purified from bovine pineal extract by affinity chromatography on immunoglobulins (Ig)-Sepharose. The overall purification was about 45-fold; the yield was 84%. This enzyme constitutes about 2.0% of the soluble proteins in the pineal gland. The enzyme represented a single precipitin line on Ouchterlony double diffusion plate and immunoelectrophoresis. Ultracentrifugation analysis indicated the existence of molecular aggregates of enzyme and disc gel electrophoresis showed one main protein band and several minor bands. However sodium dodecyl sulphate (SDS) gel electrophoresis showed a single protein band with subunit molecular weight 38,000 demonstrating bovine pineal HIOMT to be polymer enzyme of a single subunit. The properties of the purified enzyme including disc gel electrophoretic pattern, the effect of pH, chemicals and substrates and immunological properties were identical with those of the crude enzyme.     

Immunochemistry of a Formamide-extracted Antigen from Clostridium perfringens Cell Walls

The type-specific antigen of a strain of Clostridium perfringens involved in food poisoning was isolated from the cell wall by the use of hot formamide. The antigen appears to consist of polysaccharide or mucopeptide. The formamide extract was shown to be heterogeneous by gel filtration on Sephadex G-200. The serologically active fraction contained about 25% of the amount of protein present in the original formamide extract. Hexosamine, acetyl groups, and carbohydrate also were detected. The formamide extract showed a high degree of serological activity. The serological activity was increased twofold on Sephadex gel filtration.     

Biochemical and immunochemical properties of the cell surface of Renibacterium salmoninarum.

The biochemical composition of the cell envelope of Renibacterium salmoninarum was investigated in a total of 13 strains isolated from different salmonid fish species at various geographical locations of the United States, Canada, and Europe. A marked similarity with the type strain R. salmoninarum ATCC 33209 was found both in the peptidoglycan and the cell wall polysaccharide. The primary structure of the peptidoglycan was found to be consistent with lysine in the third position of the peptide subunit, a glycyl-alanine interpeptide bridge between lysine and D-alanine of adjacent peptide subunits, and a D-alanine amide substituent at the alpha-carboxyl group of D-glutamic acid in position 2 of the peptide subunit. The cell wall polysaccharide contained galactose as the major sugar component which was accompanied by rhamnose, N-acetylglucosamine, and N-acetylfucosamine. The polysaccharide amounted to more than 60% of the dry weight of the cell walls. It was found to be covalently linked to the peptidoglycan and was released by hot formamide treatment. On gel filtration chromatography the extracted polysaccharide behaved like a homogeneous polymeric compound. The purified cell wall polysaccharide showed antigenic activity with antiserum obtained by immunization of rabbits with heat-inactivated trypsinized cells of R. salmoninarum. Immunoblotting experiments with nontrypsinized cell walls and antisera raised against R. salmoninarum cells revealed that antigenic proteins were attached to the cell walls.     

Composition of cell wall preparations of rice bran and germ

Cell walls of petrol-defatted non-waxy IR32 rice bran and germ were prepared by protein removal with 0.5% SDS—0.6% β-mercaptoethanol, heating the residue to 80°, and destarching with Bacillus licheniformis α-amylase. A waxy rice, IR29, had a similar cell wall composition as IR32. Principal wall sugars were arabinose, xylose, and glucose. The 0.5 M sodium or potassium hydroxide and 8 M urea preferentially extracted arabinose-, xylose- and uronic acid-rich polysaccharides but 6 M sodium hydroxide—0.81 M boric acid extracted mannose-rich polysaccharides. DEAE-cellulose BO₃^3? chromatography of the 0.5 M sodium hydroxide extracts gave fractions of similar arabinose— xylose ratios. Proteins in the cell wall preparations had only 0.4–1.6% hydroxyproline, and were bound mainly to polysaccharides, based on disc gel electrophoresis. The preparations were autofluorescent in UV and rich in phenols, mainly ferulic acid. The cell wall preparations and their 8 M urea fractions had a softening effect on defatted waxy starch aqueous gel at 0.2–2% of the starch.     

A comparison of the adhesive properties and surface ultrastructure of the fibrillar Streptococcus sanguis 12 and an adhesion deficient non-fibrillar mutant 12 na

Streptococcus sanguis 12 and a naturally occurring mutant, 12 na, were screened for their ultrastructure and adhesive properties in vitro. Negative staining showed that Strep. sanguis 12 carried three types of surface structure. The majority of cells carried long fibrils that in different batches ranged in length from 80 to 207 nm, and shorter fibrils which were 51.0 +/- 15.7 nm long. Both types of fibrils were primarily located at the poles of the cells. Occasionally cells were seen that carried fimbriae, which are structurally distinct from fibrils, and were 3-4 nm wide and less than 1.0 micron long. Strain 12 na carried no detectable surface structures. Ruthenium red staining revealed that both strains carried a loose, amorphous, extracellular polysaccharide layer attached to the cell wall. Streptococcus sanguis 12 na was 83% less adhesive than strain 12 in a saliva-coated hydroxyapatite assay, and 50% less adhesive in a buccal epithelial cell adhesion assay. In contrast, strain 12 na was more sensitive to aggregation by parotid saliva than strain 12, and both strains were equally aggregated by whole saliva. The cell surface hydrophobicity of the two strains was similar. Extraction of surface proteins by sodium lauroyl-sarcosinate followed by sodium dodecylsulphate polyacrylamide gel electrophoresis demonstrated that Strep. sanguis 12 expressed more high mol.wt proteins on its surface than strain 12 na. Using immunogold labelling, the fibrils of strain 12 labelled well with antiserum directed against the long fibrils, but so did the cell surfaces of both Strep. sanguis 12 and 12 na. High molecular weight proteins and cell surface fibrils may be associated with adhesion in this strain.     

A comparison of the adhesive properties and surface ultrastructure of the fibrillar Streptococcus sanguis 12 and an adhesion deficient non-fibrillar mutant 12 na

Streptococcus sanguis 12 and a naturally occurring mutant, 12 na, were screened for their ultrastructure and adhesive properties in vitro. Negative staining showed that Strep. sanguis 12 carried three types of surface structure. The majority of cells carried long fibrils that in different batches ranged in length from 80 to 207 nm, and shorter fibrils which were 51mD0 PT 15mD7 nm long. Both types of fibrils were primarily located at the poles of the cells. Occasionally cells were seen that carried fimbriae, which are structurally distinct from fibrils, and were 3mD4 nm wide and <1mD μm long. Strain 12 na carried no detectable surface structures. Ruthenium red staining revealed that both strains carried a loose, amorphous, extracellular polysaccharide layer attached to the cell wall. Streptococcus sanguis 12 na was 83% less adhesive than strain 12 in a saliva-coated hydroxyapatite assay, and 50% less adhesive in a buccal epithelial cell adhesion assay. In contrast, strain 12 na was more sensitive to aggregation by parotid saliva than strain 12, and both strains were equally aggregated by whole saliva. The cell surface hydrophobicity of the two strains was similar. Extraction of surface proteins by sodium lauroyl-sarcosinate followed by sodium dodecylsulphate polyacrylamide gel electrophoresis demonstrated that Strep. sanguis 12 expressed more high mol.wt proteins on its surface than strain 12 na. Using immunogold labelling, the fibrils of strain 12 labelled well with antiserum directed against the long fibrils, but so did the cell surfaces of both Strep. sanguis 12 and 12 na. High molecular weight proteins and cell surface fibrils may be associated with adhesion in this strain.     

Polyacrylamide gel electrophoresis of the capsular polysaccharides of Escherichia coli K1 and other bacteria.

Methods were developed for the polyacrylamide gel electrophoretic analysis of capsular polysaccharides of bacteria with Escherichia coli K1 as a model. Conditions were determined for the rapid and gentle extraction of the K1 polysaccharide by incubation of the bacteria in a volatile buffer and for the subsequent removal of the putative phospholipid moiety attached to the reducing end of the polysaccharide. Detection of the polysaccharides after gel electrophoresis was carried out by fluorography of samples labeled by sodium borotritiide reduction or by combined alcian blue and silver staining. The smallest components could be detected only by fluorography, owing to diffusion during staining. Components of the E. coli K1 polysialic acid capsule ranging from monomers to 80 sialic-acid-unit-containing polymers could be separated as distinct bands in a ladderlike pattern. A maximum chain length of 160 to 230 sialyl residues was estimated for the bulk of the K1 polysaccharide from the nearly linear reciprocal relationship between the logarithm of the molecular size and the distance of migration. Gel electrophoresis of capsular polysaccharides of other bacterial species revealed different electrophoretic mobilities for each polysaccharide, with a ladderlike pattern displayed by the fastest-moving components. There are many potential applications of this facile method for the determination of the sizes of molecules present in a polydisperse polysaccharide sample. When combined with the simple method for the isolation of the capsule, as in the case of the K1 capsule, it provides an efficient tool for the characterization and comparison of the capsular polysaccharides of bacteria.     

Simplified procedure for purification of Bordetella bronchiseptica dermonecrotic toxin

Abstract Bordetella bronchiseptica dermonecrotic toxin was purified by a simplified method. The method consisted of SP Toyopearl 650M chromatography and high performance liquid chromatography on a TSK gel G3000SW column. 47.5% of the activity of the crude cell extract was recovered. The purified toxin behaved as a homogeneous protein in sodium dodecyl sulfate polyacrylamide gel electrophoresis, high performance liquid chromatography, and agar gel double diffusion tests.     

Subcellular location and composition of the wall and secreted extracellular sulphated polysaccharides/proteoglycans of the diatomStauroneis amphioxys Gregory

Summary Extracellular polysaccharide/proteoglycan (EPS) mucilages play a crucial role in maintaining the structure of the extensive algal sheets that appear along the undersurface of nearshore Antarctic sea ice during the austral spring. In this study we have determined the composition and ultrastructural location of a family of novel sulphated polysaccharides/proteoglycans from the pennate ice diatomStauroneis amphioxys Gregory. They occur as soluble EPS in the culture supernatant, as an intercellular mucilage sheet, and as components of a distinct organic layer (diatotepum) underlying the silicious cell wall. The ultrastructural location and quantitative extraction of the mucilage EPS and the major diatotepum polysaccharides with hot water and alkali, respectively, was monitored by light and electron microscopy. The EPS and wall components were purified by Ultrafiltration, anion exchange and gel filtration chromatographies, and their monosaccharide composition was determined by gas-chro-matography mass spectrometry. The soluble and mucilage EPS, and major diatotepum polysaccharides/proteoglycans had an apparent molecular mass greater than 2 × 10⁶ Da on gel. They contained a similar complex monosaccharide composition that includes glucuronic acid and galactose as the major sugars and significant levels of rhamnose, fucose, arabinose, xylose, mannose, glucose and the mono-O-methylated monosaccharides 3-O-methylrhamnose, 3-O-methylfucose, 3-O- and 4-O-methylxylose. The ratios of Gal to GlcA, which together account for 45% of the monosaccharides, varied from 0.8 (in the soluble EPS) to 2.3 (in diatotepum polysaccharides). The level of sulphation also varied from 5–15% (w/w), with the mucilage EPS being the most highly sulphated. The soluble EPS also contains a small amount of protein (ca. 5%, v/w) which cochromatographs with the polysaccharide during gel filtration and anion exchange chromatographies suggesting that it may be a sulphated proteoglycan. They are clearly distinct from a sulphated glucuronomannan that remained in the alkali-insoluble fraction and may be tightly associated with the silica wall components. The amount of mucilage EPS increased during logarithmic growth but decreased during stationary phase, when most of the EPS was found in the soluble pool. These changes correlate with the breakdown of the mucilage sheet and dispersal of diatom colonies during stationary growth. Interestingly, the soluble EPS from stationary-growth cultures was indistinguishable from the mucilage EPS of logarithmic- or stationary-phase cells, suggesting that the dissolution of the intercellular mucilage was not due to a change in EPS composition. The possibility that cell motility may be required for mucilage formation and the significance of these polysaccharides in the under-ice community is discussed.