Fine structure of cell wall surfaces in the giant-cellular xanthophycean alga <Emphasis Type="Italic">Vaucheria terrestris</Emphasis>

The mechanical strength of cell walls in the tip-growing cells of Vaucheria terrestris is weakened by treatment with proteolytic enzymes. To clarify the morphological characteristics of the components maintaining cell wall strength, the fine structures of the cell walls, with and without protease treatment, were observed by transmission electron microscopy (TEM) and atomic force microscopy (AFM). Observations indicated that cellulose microfibrils were arranged in random directions and overlapped each other. Most of the microfibrils observed in the inner surface of the cell wall were embedded in amorphous materials, whereas in the outer surface of the cell wall, microfibrils were partially covered by amorphous materials. The matrix components embedding and covering microfibrils were almost completely removed by protease treatment, revealing layers of naked microfibrils deposited deeply in the cell wall. Topographic data taken from AFM observations provided some additional information that could not be obtained by TEM, including more detailed images of the granular surface textures of the matrix components and the detection of microfibrils in the interior of the cell wall. In addition, quantitative AFM data of local surface heights enabled us to draw three-dimensional renderings and to quantitatively estimate the extent of the exposure of microfibrils by the enzymatic treatment.     

Effect of steam treatment on the properties of wood cell walls

Steam treatment is a hygrothermal method of potential industrial significance for improving the dimensional stability and durability of wood materials. The steaming results in different chemical and micromechanical changes in the nanostructured biocomposite that comprise a wood cell wall. In this study, spruce wood ( Picea abies Karst.) that had been subjected to high-temperature steaming up to 180 °C was examined, using imaging Fourier Transform Infrared (FT-IR) microscopy and nanoindentation to track changes in the chemical structure and the micromechanical properties of the secondary cell wall. Similar changes in the chemical components, due to the steam treatment, were found in earlywood and latewood. A progressive degradation of the carbonyl groups in the glucuronic acid unit of xylan and a loss of mannose units in the glucomannan backbone, that is, a degradation of glucomannan, together with a loss of the C═O group linked to the aromatic skeleton in lignin, was found. The development of the hygroscopic and micromechanical properties that occurred with an elevation in the steam temperature correlated well with this pattern of degradation in the constituents in the biocomposite matrix in the cell wall (hemicellulose and lignin).     

OBSERVATIONS ON THE FINE STRUCTURE OF CALLIXYLON WOOD

Secondary wood of three species of Callixylon of Lower Mississippian age, preserved by three different modes (fusinization, silicification, and phosphatization), have been studied and characterized in detail. Problems of interpretation at the SEM level of permineralized woods, both containing (silicified wood of Callixylon erianum) and essentially lacking (phosphatized wood of C. arnoldii) original organic cell wall material, are analyzed and discussed. In particular, it is concluded that the flat to curved surfaces showing no evidence of apertures, observed in bordered pit pairs, commonly represent pit membrane surfaces. It is accepted, however, that some concave surfaces might be the mineral accretion surfaces of incomplete pit cavity casts as proposed by Leo and Barghoorn (1976). Regions between groups of pits, previously interpreted as crassulae, may be artifacts of preservation. The fusinized wood has the general appearance of charcoal, but unlike commercially produced charcoal provides evidence of its original microfibrillar structure. The origin of fusain in the fossil record is discussed, and it is concluded that it probably had several origins, including forest fire. Since charcoal can be produced naturally in the absence of O₂ (Brown and Davis, 1973), the suggestion that fusain (charcoal) in the geologic column provides a basis for “assessing oxygen levels in paleoatmospheres” (Cope and Chaloner, 1980) is not supported. Natural sites of fusain production in the absence of O₂ are regions of vulcanism and organic sediments inhabited by anaerobic microorganisms. A circular pattern of crystal orientation in the pit borders of C. arnoldii is interpreted to represent the original microfibrillar pattern. Pit apertures in C. arnoldii are shown to be circular to slightly elliptical. Interpretive evidence of heterogeneous pit membranes in C. arnoldii suggests but does not prove the presence of a torus. The distinctive central region in some pit membranes of the fusinized wood of Callixylon sp. might represent accumulations of waste metabolites. It is argued that a torus would be highly adaptive in large pits with circular apertures.     

Ultramicroscopic composition and supramolecular structure of wood matrix

The ultramicroscopic composition and supramolecular structure of wood matrix were investigated by methods of electron and atomic force microscopy (AFM). New data on specific features of the composition and cell wall structure of Juniper wood (Juniperus communis L.) were obtained. Native lignin was found to be water soluble. It was also shown that lignin does not constitute a continuous matrix between cellulose fibrils, but is deposited as spherical particles.     

Atomic force microscopy of cell growth and division in Staphylococcus aureus

The growth and division of Staphylococcus aureus was monitored by atomic force microscopy (AFM) and thin-section transmission electron microscopy (TEM). A good correlation of the structural events of division was found using the two microscopies, and AFM was able to provide new additional information. AFM was performed under water, ensuring that all structures were in the hydrated condition. Sequential images on the same structure revealed progressive changes to surfaces, suggesting the cells were growing while images were being taken. Using AFM small depressions were seen around the septal annulus at the onset of division that could be attributed to so-called murosomes (Giesbrecht et al., Arch. Microbiol. 141:315-324, 1985). The new cell wall formed from the cross wall (i.e., completed septum) after cell separation and possessed concentric surface rings and a central depression; these structures could be correlated to a midline of reactive material in the developing septum that was seen by TEM. The older wall, that which was not derived from a newly formed cross wall, was partitioned into two different surface zones, smooth and gel-like zones, with different adhesive properties that could be attributed to cell wall turnover. The new and old wall topographies are equated to possible peptidoglycan arrangements, but no conclusion can be made regarding the planar or scaffolding models.     

An atomic force microscopy method for the detection of binding forces between bacteria and a lipid bilayer containing higher order gangliosides

We developed an atomic force microscopy (AFM) method to determine the binding forces between a model cell wall plasma membrane and Vibrio cholerae. V. cholerae cells were covalently attached to AFM probes and forces were determined against a lipid bilayer containing sialic acid (N-acetylneuraminic acid) molecules as well as several control surfaces.     

Distribution of lignin and its coniferyl alcohol and coniferyl aldehyde groups in Picea abies and Pinus sylvestris as observed by Raman imaging

Wood cell wall consists of several structural components, such as cellulose, hemicelluloses and lignin, whose concentrations vary throughout the cell wall. It is a composite where semicrystalline cellulose fibrils, acting as reinforcement, are bound together by amorphous hemicelluloses and lignin matrix. Understanding the distribution of these components and their functions within the cell wall can provide useful information on the biosynthesis of trees. Raman imaging enables us to study chemistry of cell wall without altering the structure by staining the sample or fractionating it. Raman imaging has been used to analyze distributions of lignin and cellulose, as well as the functional groups of lignin in wood. In our study, we observed the distribution of cellulose and lignin, as well as the amount of coniferyl alcohol and aldehyde groups compared to the total amount of lignin in pine (Pinus sylvestris) and spruce (Picea abies) wood samples. No significant differences could be seen in lignin and cellulose distribution between these samples, while clear distinction was observed in the distribution of coniferyl alcohols and coniferyl aldehyde in them. These results could provide valuable insight on how two similar wood species control biosynthesis of lignin differently during the differentiation of cell wall.     

Localisation and characterisation of incipient brown-rot decay within spruce wood cell walls using FT-IR imaging microscopy

Spruce wood that had been degraded by brown-rot fungi (Gloeophyllum trabeum or Poria placenta) exhibiting mass losses up to 16% was investigated by transmission Fourier transform infrared (FT-IR) imaging microscopy. Here the first work on the application of FT-IR imaging microscopy and multivariate image analysis of fungal degraded wood is presented and the first report on the spatial distribution of polysaccharide degradation during incipient brown-rot of wood. Brown-rot starts to become significant in the outer cell wall regions (middle lamellae, primary cell walls, and the outer layer of the secondary cell wall S1). This pattern was detected even in a sample with non-detectable mass loss. Most significant during incipient decay was the cleavage of glycosidic bonds, i.e. depolymerisation of wood polysaccharides and the degradation of pectic substances. Accordingly, intramolecular hydrogen bonding within cellulose was reduced, while the presence of phenolic groups increased.     

Atomic Force Microscopy: A Promising Tool for Deciphering the Pathogenic Mechanisms of Fungi in Cystic Fibrosis

During the past decades, atomic force microscopy (AFM) has emerged as a powerful tool in microbiology. Although most of the works concerned bacteria, AFM also permitted major breakthroughs in the understanding of physiology and pathogenic mechanisms of some fungal species associated with cystic fibrosis. Complementary to electron microscopies, AFM offers unprecedented insights to visualize the cell wall architecture and components through three-dimensional imaging with nanometer resolution and to follow their dynamic changes during cell growth and division or following the exposure to drugs and chemicals. Besides imaging, force spectroscopy with piconewton sensitivity provides a direct means to decipher the forces governing cell–cell and cell–substrate interactions, but also to quantify specific and non-specific interactions between cell surface components at the single-molecule level. This nanotool explores new ways for a better understanding of the structures and functions of the cell surface components and therefore may be useful to elucidate the role of these components in the host–pathogen interactions as well as in the complex interplay between bacteria and fungi in the lung microbiome.

     

Origin of the biomechanical properties of wood related to the fine structure of the multi-layered cell wall

In this study, a basic model is introduced to describe the biomechanical properties of the wood from the viewpoint of the composite structure of its cell wall. First, the mechanical interaction between the cellulose microfibril (CMF) as a bundle framework and the lignin-hemicellulose as a matrix (MT) skeleton in the secondary wall is formulated based on "the two phase approximation." Thereafter, the origins of (1) tree growth stress, (2) shrinkage or swelling anisotropy of the wood, and (3) moisture dependency of the Young's modulus of wood along the grain were simulated using the newly introduced model. Through the model formulation; (1) the behavior of the cellulose microfibril (CMF) and the matrix substance (MT) during cell wall maturation was estimated; (2) the moisture reactivity of each cell wall constituent was investigated; and (3) a realistic model of the fine composite structure of the matured cell wall was proposed. Thus, it is expected that the fine structure and internal property of each cell wall constituent can be estimated through the analyses of the macroscopic behaviors of wood based on the two phase approximation.     

Compositional characterization and imaging of “wall-bound” acylesters of Populus trichocarpa reveal differential accumulation of acyl molecules in normal and reactive woods

Acylesterification is one of the common modifications of cell wall non-cellulosic polysaccharides and/or lignin primarily in monocot plants. We analyzed the cell-wall acylesters of black cottonwood (Populus trichocarpa Torr. & Gray) with liquid chromatography-mass spectrometry (LC-MS), Fourier transform-infrared (FT-IR) microspectroscopy, and synchrotron infrared (IR) imaging facility. The results revealed that the cell wall of dicotyledonous poplar, as the walls of many monocot grasses, contains a considerable amount of acylesters, primarily acetyl and p-hydroxycinnamoyl molecules. The "wall-bound" acetate and phenolics display a distinct tissue specific-, bending stress responsible- and developmental-accumulation pattern. The "wall-bound" p-coumarate predominantly accumulated in young leaves and decreased in mature leaves, whereas acetate and ferulate mostly amassed in the cell wall of stems. Along the development of stem, the level of the "wall-bound" ferulate gradually increased, while the basal level of p-coumarate further decreased. Induction of tension wood decreased the accumulation of the "wall-bound" phenolics while the level of acetate remained constant. Synchrotron IR-mediated chemical compositional imaging revealed a close spatial distribution of acylesters with cell wall polysaccharides in poplar stem. These results indicate that different "wall-bound" acylesters play distinct roles in poplar cell wall structural construction and/or metabolism of cell wall matrix components.     

Improvement of decay resistance of wood via combination treatment on wood cell wall: Swell-bonding with maleic anhydride and graft copolymerization with glycidyl methacrylate and methyl methacrylate

Poplar wood (Populus ussuriensis Kom) was modified by a novel combined two-step treatment to improve its decay resistance. Maleic Anhydride (MAN) was first employed to swell and bond to wood cell wall, and then mixed monomers of glycidyl methacrylate/methyl methacrylate (GMA/MMA) were used to graft copolymerization within wood cell lumen. The swelling and bonding of cell wall by MAN, interfacial compatibility between resultant polymer from GMA/MMA monomers and wood cell wall, and decay resistance of all composites were tested and analyzed by Scanning electron microscopy–Energy dispersive X-ray (SEM–EDX), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) apparatus. The results indicate that the volume of poplar wood treated by MAN swells about 9% with about 15% of weight percent gain, and MAN chemically bonds to the cell wall through substitution reaction with hydroxyl group, and the grafting adduct mainly remains as an amorphous form. The resultant Poplar-MAN shows improved decay resistance of 69.79% against brown fungus (Gloeophyllum trabeum (Pers. ex Fr.) Murr.) and 81.42% against white fungus (Phanerochaete chrysosporium Burdsall.) over those of untreated Poplar, respectively. After the combined two-step treatment, GMA and MMA are copolymerized within wood cell lumen, and the resultant polymer is also grafted onto wood cell wall, resulting in the improvement of interfacial compatibility between polymer and wood substance without obvious gaps. The decay resistance of the resultant composite from the combined two-step treatment against the brown decay fungus and the white decay fungus is improved by 97.64% and 99.17%, respectively, compared with those of untreated poplar wood; and also more excellent than those of MMA treated wood, GMA/MMA monomers treated wood, organic 3-Iodo-2-Propynyl Butyl Carbamate (IPBC) treated wood and inorganic boron compounds treated wood, respectively.     

Detection of Lignin Peroxidase and Xylanase by Immunocytochemical Labeling in Wood Decayed by Basidiomycetes

The white rot fungi used in this study caused two different forms of degradation. Phanerochaete chrysosporium, strain BKM-F-1767, and Phellinus pini caused a preferential removal of lignin from birch wood, whereas Trametes (Coriolus) versicolor caused a nonselective attack of all cell wall components. Use of polyclonal antisera to H8 lignin peroxidase and monoclonal antisera to H2 lignin peroxidase followed by immunogold labeling with protein A-gold or protein G-gold, respectively, showed lignin peroxidase extra-and intracellularly to fungal hyphae and within the delignified cell walls after 12 weeks of laboratory decay. Lignin peroxidase was localized at sites within the cell wall where electron-dense areas of the lignified cell wall layers remained. In wood decayed by Trametes versicolor, lignin peroxidase was located primarily along the surface of eroded cell walls. No lignin peroxidase was evident in brown-rotted wood, but slight labeling occurred within hyphal cells. Use of polyclonal antisera to xylanase followed by immunogold labeling showed intense labeling on fungal hyphae and surrounding slime layers and within the woody cell wall, where evidence of degradation was apparent. Colloidal-gold-labeled xylanase was prevalent in wood decayed by all fungi used in this study. Areas of the wood with early stages of cell wall decay had the greatest concentration of gold particles, while little labeling occurred in cells in advanced stages of decay by brown or white rot fungi.     

NANOSTRUCTURE OF THE DIATOM FRUSTULE AS REVEALED BY ATOMIC FORCE AND SCANNING ELECTRON MICROSCOPY

The cell wall (frustule) of the freshwater diatom Pinnularia viridis (Nitzsch) Ehrenberg is composed of an assembly of highly silicified components and associated organic layers. We used atomic force microscopy (AFM) to investigate the nanostructure and relationship between the outermost surface organics and the siliceous frustule components of live diatoms under natural hydrated conditions. Contact mode AFM imaging revealed that the walls were coated in a thick mucilaginous material that was interrupted only in the vicinity of the raphe fissure. Analysis of this mucilage by force mode AFM demonstrated it to be a nonadhesive, soft, and compressible material. Application of greater force to the sample during repeated scanning enabled the mucilage to be swept from the hard underlying siliceous components and piled into columns on either side of the scan area by the scanning action of the tip. The mucilage columns remained intact for several hours without dissolving or settling back onto the cleaned valve surface, thereby revealing a cohesiveness that suggested a degree of cross-linking. The hard silicified surfaces of the diatom frustule appeared to be relatively smooth when living cells were imaged by AFM or when field-emission SEM was used to image chemically cleaned walls. AFM analysis of P. viridis frustules cleaved in cross-section revealed the nanostructure of the valve silica to be composed of a conglomerate of packed silica spheres that were 44.8 ± 0.7 nm in diameter. The silica spheres that comprised the girdle band biosilica were 40.3 ± 0.8 nm in diameter. Analysis of another heavily silicified diatom, Hantzschia amphioxys (Ehrenberg) Grunow, showed that the valve biosilica was composed of packed silica spheres that were 37.1 ± 1.4 nm and that silica particles from the girdle bands were 38.1 ± 0.5 nm. These results showed little variation in the size range of the silica particles within a particular frustule component (valve or girdle band), but there may be differences in particle size between these components within a diatom frustule and significant differences are found between species.     

Raman imaging to investigate ultrastructure and composition of plant cell walls: distribution of lignin and cellulose in black spruce wood (Picea mariana)

A detailed understanding of the structural organization of the cell wall of vascular plants is important from both the perspectives of plant biology and chemistry and of commercial utilization. A state-of-the-art 633-nm laser-based confocal Raman microscope was used to determine the distribution of cell wall components in the cross section of black spruce wood in situ. Chemical information from morphologically distinct cell wall regions was obtained and Raman images of lignin and cellulose spatial distribution were generated. While cell corner (CC) lignin concentration was the highest on average, lignin concentration in compound middle lamella (CmL) was not significantly different from that in secondary wall (S2 and S2–S3). Images generated using the 1,650 cm⁻¹ band showed that coniferaldehyde and coniferyl alcohol distribution followed that of lignin and no particular cell wall layer/region was therefore enriched in the ethylenic residue. In contrast, cellulose distribution showed the opposite pattern—low concentration in CC and CmL and high in S2 regions. Nevertheless, cellulose concentration varied significantly in some areas, and concentrations of both lignin and cellulose were high in other areas. Though intensity maps of lignin and cellulose distributions are currently interpreted solely in terms of concentration differences, the effect of orientation needs to be carefully considered to reveal the organization of the wood cell wall.The Forest Products Laboratory is maintained in cooperation with the University of Wisconsin. This article was written and prepared by U.S. Government employees on official time, and it is therefore in the public domain and not subject to copyright. The use of trade or firm names in this publication is for reader information and does not imply endorsement by the U.S. Department of Agriculture of any product or service.     

Activities of chitinolytic enzymes during primary and secondary colonization of wood by basidiomycetous fungi

The nitrogen (N) content of wood is usually suboptimal for fungal colonization. During decomposition of wood, an increasing fraction of the N becomes incorporated into fungal mycelium. Between 5 and 50% of the N in wood-degrading mycelium may be incorporated into chitin. Chitinolytic enzymes render this N available for re-utilization. Here, the activities of chitinolytic enzymes produced by wood-rotting fungi during degradation of spruce (Picea abies) wood were quantified in situ using fluorogenic 4-methylumbelliferyl substrates. A new method was developed that enables spatial quantification of enzyme activities on solid surfaces. All of the three tested fungi produced endochitinases, chitobiosidases and N-acetylhexosaminidases during colonization of wood. N-acetylhexosaminidase activity, and in some cases also chitobiosidase and endochitinase activities, were higher during secondary overgrowth of another fungus than during primary colonization of noncolonized wood. The results suggest that wood-degrading fungi degrade their own cell walls as well as the hyphae of earlier colonizers. Recycling of cell wall material within single mycelia and between fungal individuals during succession may lead to retention of N within woody debris.     

The Detection of Tension Wood with Fluorescent Dyes

Sections of a thickness of 15 β cut from unfixed material by means of a freezing microtome were treated for 1 hr with 0.2% aqueous solutions of a number of fluorochromes. Under normal microscopical conditions no uniform staining pattern could be observed. With the aid of an ultraviolet microscope, however, one type of fluorescence pattern became apparent. In all cases observed the thickened gelatinous secondary cell walls of tension wood showed a remarkable lack of fluorescence; this in marked contrast with a very distinct fluorescence exhibited by the primary cell wall and by both primary and secondary cell walls of normal wood.     

Selection of white-rot fungi for biopulping

Different rates of wood decay and ligninolytic activity were found in wood decayed by various white-rot fungi. Chemical and ultrastructural analyses showed wood decayed by Coriolus versicolor consisted of a nonselective attack on all cell wall components. Lignin degradation was restricted to the cell wall adjacent to hyphae or around the circumference of cell lumina. Decay by Phellinus pini, Phlebia tremellosus, Poria medullapanis and Scytinostroma galactinum was selective for lignin degradation. Secondary walls were void of lignin and middle lamellae were extensively degraded. A diffuse attack on lignin occurred throughout all cell wall layers. Variation in ligninolytic activity was found among strains of Phanerochaete chrysosporium. Differences in weight loss as well as lignin and polysaccharide degradation were also found when wood of different coniferous and deciduous tree species was decayed by various white-rot fungi.