Contribution of herd characteristics to best linear unbiased estimates of slaughter traits in beef cattle

Genetic evaluations separate phenotypes into their contributing additive genetic effects and non-(additive) genetic effects, with the former termed best linear unbiased predictions, and the latter termed best linear unbiased estimates (BLUEs). For the purpose of the present study, genetic evaluations, along with phenotypic data from 4 137 376 animals, were used to generate herd, year of slaughter and sex contemporary group BLUEs for various slaughter-related traits. These slaughter traits included carcass weight (CW), carcass conformation (CC) and carcass fat (CF). For the 4 665 herds that were consistently slaughtering ≥10 animals/year between the years 2014 and 2018, inclusive, all relevant contemporary group BLUEs were collapsed into a single herd-year value; results herein relate to these herds. The within-year herd-year BLUE correlations between CW and CC, between CW and CF, and between CC and CF were 0.51, 0.10 and −0.04, respectively. The repeatability across years of the herd-year BLUEs for CW, CC and CF was 0.66, 0.59 and 0.50, respectively. Furthermore, when the herds were stratified, within year, on the percentile rank of their herd-year BLUEs, herds had the greatest probability of remaining in the same BLUE stratum from one year to the next. In addition, results from the present study determined that various herd characteristics are associated with differences in the herd BLUEs. Results from the present study could be used to advise beef producers on the most promising strategy to improve the carcass merit of their animals.     

Live animal measurements, carcass composition and plasma hormone and metabolite concentrations in male progeny of sires differing in genetic merit for beef production

In genetic improvement programmes for beef cattle, the effect of selecting for a given trait or index on other economically important traits, or their predictors, must be quantified to ensure no deleterious consequential effects go unnoticed. The objective was to compare live animal measurements, carcass composition and plasma hormone and metabolite concentrations of male progeny of sires selected on an economic index in Ireland. This beef carcass index (BCI) is expressed in euros and based on weaning weight, feed intake, carcass weight and carcass conformation and fat scores. The index is used to aid in the genetic comparison of animals for the expected profitability of their progeny at slaughter. A total of 107 progeny from beef sires of high (n = 11) or low (n = 11) genetic merit for the BCI were compared in either a bull (slaughtered at 16 months of age) or steer (slaughtered at 24 months of age) production system, following purchase after weaning (8 months of age) from commercial beef herds. Data were analysed as a 2 × 2 factorial design (two levels of genetic merit by two production systems). Progeny of high BCI sires had heavier carcasses, greater (P < 0.01) muscularity scores after weaning, greater (P < 0.05) skeletal scores and scanned muscle depth pre-slaughter, higher (P < 0.05) plasma insulin concentrations and greater (P < 0.01) animal value (obtained by multiplying carcass weight by carcass value, which was based on the weight of meat in each cut by its commercial value) than progeny of low BCI sires. Regression of progeny performance on sire genetic merit was also undertaken across the entire data set. In steers, the effect of BCI on carcass meat proportion, calculated carcass value (c/kg) and animal value was positive (P < 0.01), while a negative association was observed for scanned fat depth pre-slaughter and carcass fat proportion (P < 0.01), but there was no effect in bulls. The effect of sire expected progeny difference (EPD) for carcass weight followed the same trends as BCI. Muscularity scores, carcass meat proportion and calculated carcass value increased, whereas scanned fat depth, carcass fat and bone proportions decreased with increasing sire EPD for conformation score. The opposite association was observed for sire EPD for fat score. Results from this study show that selection using the BCI had positive effects on live animal muscularity, carcass meat proportion, proportions of high-value cuts and carcass value in steer progeny, which are desirable traits in beef production.     

Intake, growth and carcass traits in male progeny of sires differing in genetic merit for beef production

Validation of economic indexes under a controlled experimental environment, can aid in their acceptance and use as breeding tools to increase herd profitability. The objective of this study was to compare intake, growth and carcass traits in bull and steer progeny of high and low ranking sires, for genetic merit in an economic index. The Beef Carcass Index (BCI; expressed in euro (€) and based on weaning weight, feed intake, carcass weight, carcass conformation and fat scores) was generated by the Irish Cattle Breeding Federation as a tool to compare animals on genetic merit for the expected profitability of their progeny at slaughter. A total of 107 male suckler herd progeny, from 22 late-maturing 'continental' beef sires of high (n = 11) or low (n = 11) BCI were compared under either a bull or steer production system, and slaughtered at approximately 16 and 24 months of age, respectively. All progeny were purchased after weaning at approximately 6 to 8 months of age. Dry matter (DM) intake and live-weight gain in steer progeny offered grazed grass or grass silage alone, did not differ between the two genetic groups. Similarly, DM intake and feed efficiency did not differ between genetic groups during an ad libitum concentrate-finishing period on either production system. Carcasses of progeny of high BCI sires were 14 kg heavier (P < 0.05) than those of low BCI sires. In a series of regression analyses, increasing sire BCI resulted in increases in carcass weight (P < 0.01) and carcass conformation (P = 0.051) scores, and decreases in carcass fat (P < 0.001) scores, but had no effect on weaning weight or DM intake of the progeny. Each unit increase in sire expected progeny difference led to an increase in progeny weaning weight, DM intake, carcass weight, carcass conformation score and carcass fat score of 1.0 (s.e. = 0.53) kg, 1.1 (s.e. = 0.32) kg, 1.3 (s.e. = 0.31) kg, 0.9 (s.e. = 0.32; scale 1 to 15) and 1.0 (s.e. = 0.25; scale 1 to 15), respectively, none of which differed from the theoretical expectation of unity. The expected difference in profitability at slaughter between progeny of the high and low BCI sires was €42, whereas the observed phenotypic profit differential of the progeny was €53 in favour of the high BCI sires. Results from this study indicate that the BCI is a useful tool in the selection of genetically superior sires, and that actual progeny performance under the conditions of this study is within expectations for both bull and steer beef production systems.     

Relationship between dairy cow genetic merit and profit on commercial spring calving dairy farms

Because not all animal factors influencing profitability can be included in total merit breeding indices for profitability, the association between animal total merit index and true profitability, taking cognisance of all factors associated with costs and revenues, is generally not known. One method to estimate such associations is at the herd level, associating herd average genetic merit with herd profitability. The objective of this study was to primarily relate herd average genetic merit for a range of traits, including the Irish total merit index, with indicators of performance, including profitability, using correlation and multiple regression analyses. Physical, genetic and financial performance data from 1131 Irish seasonal calving pasture-based dairy farms were available following edits; data on some herds were available for more than 1 year of the 3-year study period (2007 to 2009). Herd average economic breeding index (EBI) was associated with reduced herd average phenotypic milk yield but with greater milk composition, resulting in higher milk prices. Moderate positive correlations (0.26 to 0.61) existed between genetic merit for an individual trait and average herd performance for that trait (e.g. genetic merit for milk yield and average per cow milk yield). Following adjustment for year, stocking rate, herd size and quantity of purchased feed in the multiple regression analysis, average herd EBI was positively and linearly associated with net margin per cow and per litre as well as gross revenue output per cow and per litre. The change in net margin per cow per unit change in the total merit index was €1.94 (s.e. = 0.42), which was not different from the expectation of €2. This study, based on a large data set of commercial herds with accurate information on profitability and genetic merit, confirms that, after accounting for confounding factors, the change in herd profitability per unit change in herd genetic merit for the total merit index is within expectations.     

Selection for carcass quality in hill sheep measured by X-ray computer tomography

This paper describes an investigation of the use of computer tomography (CT) to genetically improve carcass composition and conformation in Scottish Blackface sheep. After 5 years of selection on an index designed to improve both composition and conformation (the 'CT index'), a large response was observed in the CT index, with genetic progress equivalent to 0.11 phenotypic standard deviations per year. Heritabilities for the index and for the component traits of average CT-assessed muscle area, ultrasonic muscle depth and ultrasonic fat depth were 0.41 (s.e. 0.08), 0.38 (s.e. 0.07), 0.41 (s.e. 0.05) and 0.30 (s.e. 0.05), respectively. The index was positively genetically correlated with ultrasonic muscle depth and carcass weight and negatively genetically correlated with fat class. The genetic and phenotypic correlations among ultrasonic measurements were positive and moderate. However, many of the genetic correlations tended to have large standard errors. Selection on the CT index moderately improved conformation and was successful at decreasing fat class of the carcass. Equivalent selection on live weight at ultrasound scanning would improve carcass and slaughter weight, and total price received, but would have a slightly deleterious impact on conformation score. The results of this study demonstrate that genetic improvement of carcass quality can be achieved in hill sheep using CT assessed traits.     

Genetic parameters for carcass weight,conformation and fat in five beef cattle breeds

Profitability of beef production can be increased by genetically improving carcass traits. To construct breeding value evaluations for carcass traits, breed-specific genetic parameters were estimated for carcass weight, carcass conformation and carcass fat in five beef cattle breeds in Finland (Hereford, Aberdeen Angus, Simmental, Charolais and Limousin). Conformation and fat were visually scored using the EUROP carcass classification. Each breed was separately analyzed using a multitrait animal model. A total of 6879–19 539 animals per breed had phenotypes. For the five breeds, heritabilities were moderate for carcass weight (h²=0.39 to 0.48, s.e.=0.02 to 0.04) and slightly lower for conformation (h²=0.30 to 0.44, s.e.=0.02 to 0.04) and carcass fat (h²=0.29 to 0.44, s.e.=0.02 to 0.04). The genetic correlation between carcass weight and conformation was favorable in all breeds (r_G=0.37 to 0.53, s.e.=0.04 to 0.05), heavy carcasses being genetically more conformed. The phenotypic correlation between carcass weight and carcass fat was moderately positive in all breeds (r_P=0.21 to 0.32), implying that increasing carcass weight was related to increasing fat levels. The respective genetic correlation was the strongest in Hereford (r_G=0.28, s.e.=0.05) and Angus (r_G=0.15, s.e.=0.05), the two small body-sized British breeds with the lowest conformation and the highest fat level. The correlation was weaker in the other breeds (r_G=0.08 to 0.14). For Hereford, Angus and Simmental, more conformed carcasses were phenotypically fatter (r_P=0.11 to 0.15), but the respective genetic correlations were close to zero (r_G=−0.05 to 0.04). In contrast, in the two large body-sized and muscular French breeds, the genetic correlation between conformation and fat was negative and the phenotypic correlation was close to zero or negative (Charolais: r_G=−0.18, s.e.=0.06, r_P=0.02; Limousin: r_G=−0.56, s.e.=0.04, r_P=−0.13). The results indicate genetic variation for the genetic improvement of the carcass traits, favorable correlations for the simultaneous improvement of carcass weight and conformation in all breeds, and breed differences in the correlations of carcass fat.     

Influence of sex, slaughter weight and carcass weight on “non-carcass” and carcass quality in segureña lambs

The effects of sex, slaughter weight and carcass weight on carcass characteristics and meat quality traits were evaluated using 100 Segureña lambs. The management of all lambs was similar prior to slaughter at 19–25 kg. Slaughtered animals with a hot carcass weight below 20 kg were assigned to class B, and those greater than 22 kg to class C. Carcass weight had a significant influence on “non-carcass” components, dressing percentage, subjective carcass conformation, fat deposits, carcass fatness, bone and most carcass measurements. Sex had a significant effect on age at slaughter, “non-carcass” components, rib measurements, dressing percentage, fat deposits, and neck and shoulder percentage. As the weight increased, the carcass measurements also increased. Concurrently, while improving the conformation indices of the carcass, leg and dressing percentages, neither the commercial cuts of the animal nor tissue composition was significantly affected. Sex primarily affected the quantity of all types of fat deposits.     

Genetic parameters of Visual Image Analysis primal cut carcass traits of commercial prime beef slaughter animals

Visual Image analysis (VIA) of carcass traits provides the opportunity to estimate carcass primal cut yields on large numbers of slaughter animals. This allows carcases to be better differentiated and farmers to be paid based on the primal cut yields. It also creates more accurate genetic selection due to high volumes of data which enables breeders to breed cattle that better meet the abattoir specifications and market requirements. In order to implement genetic evaluations for VIA primal cut yields, genetic parameters must first be estimated and that was the aim of this study. Slaughter records from the UK prime slaughter population for VIA carcass traits was available from two processing plants. After edits, there were 17 765 VIA carcass records for six primal cut traits, carcass weight as well as the EUROP conformation and fat class grades. Heritability estimates after traits were adjusted for age ranged from 0.32 (0.03) for EUROP fat to 0.46 (0.03) for VIA Topside primal cut yield. Adjusting the VIA primal cut yields for carcass weight reduced the heritability estimates, with estimates of primal cut yields ranging from 0.23 (0.03) for Fillet to 0.29 (0.03) for Knuckle. Genetic correlations between VIA primal cut yields adjusted for carcass weight were very strong, ranging from 0.40 (0.06) between Fillet and Striploin to 0.92 (0.02) between Topside and Silverside. EUROP conformation was also positively correlated with the VIA primal cuts with genetic correlation estimates ranging from 0.59 to 0.84, whereas EUROP fat was estimated to have moderate negative correlations with primal cut yields, estimates ranged from −0.11 to −0.46. Based on these genetic parameter estimates, genetic evaluation of VIA primal cut yields can be undertaken to allow the UK beef industry to select carcases that better meet abattoir specification and market requirements.     

The effects of weather on beef carcass and growth traits

To predict the impact of climate change on our beef animals and systems, we need a better understanding of how beef cattle traits are affected by varying weather and frequency of extreme events. We analysed the effect of minimum and maximum temperatures and average daily precipitation on a range of important carcass traits, including age at slaughter, cold carcass weight, carcass growth rate and conformation and fat score (N = >1.6 million), as well as calf 200-day live weight and growth rate (N = >270 000), using data from abattoirs across Britain (carcass traits) and calves in Scottish suckler beef herds (live weights and growth). Animals which experienced higher daily maximum and minimum temperatures had slower carcass and calf growth rates. Increased precipitation also led to poorer cold carcass weights, conformation scores, calf 200-day weights and calf growth. We also analysed the effect of frequency of extreme weather events, including heatwaves, cold waves, and dry and wet days. The frequency of heatwaves, dry and wet days were shown to have significant negative effects on almost all traits considered, for example, predicting that an increase in the frequency of heatwaves by 1 day per 100 days of life would reduce cold carcass weights by about 200 g and increase age at slaughter by about 3 days. Results show that varying weather and frequency of extreme weather, across the lifetime of a beef animal, influences traits which affect the potential profit for a beef farmer. These effects may be due to several factors, including direct effects on the animal, as well as feed availability and management decisions made by the farmer. However, there is potential to mitigate negative effects through a range of animal management strategies.     

Effects of genetic merit for carcass weight, breed type and slaughter weight on performance and carcass traits of beef × dairy steers

Crossbreeding of Holstein-Friesian dairy cows with both early maturing (e.g. Aberdeen Angus (AA)) and late maturing (e.g. Belgian Blue (BB)) beef breeds is commonly practised. In Ireland, genetic merit for growth rate of beef sires is expressed as expected progeny difference for carcass weight (EPD(CWT)). The objective of this study was to compare the progeny of Holstein-Friesian cows, sired by AA and BB bulls of low (L) and high (H) EPD(CWT) for performance and carcass traits. A total of 118 spring-born male progeny from 20 (9 AA and 11 BB) sires (8 L and 12 H) were managed together from shortly after birth to about 19 months of age. They were then assigned to one of two mean slaughter weights (560 kg (light) or 620 kg (heavy)). Following slaughter, carcasses were graded for conformation class and fat class, the 6th to 10th ribs joint was dissected as an indicator of carcass composition, and samples of subcutaneous fat and musculus longissimus were subjected to Hunterlab colour measurements. A sample of m. longissimus was also chemically analysed. Slaughter and carcass weights per day of age for AAL, AAH, BBL and BBH were 747, 789, 790 and 805 (s.e. 10.5) g, and 385, 411, 427 and 443 (s.e. 4.4) g, respectively. Corresponding carcass weight, kill-out proportion, carcass conformation class (scale 1 to 5) and carcass fat class (scale 1 to 5) values were 289, 312, 320 and 333 (s.e. 4.0) kg, 516, 522, 542 and 553 (s.e. 3.5) g/kg, 2.5, 2.4, 3.0 and 3.1 (s.e. 0.10), and 3.4, 3.5, 2.9 and 2.8 (s.e. 0.11). There were few breed type × genetic merit interactions. Delaying slaughter date increased slaughter weight, carcass weight and all measures of fatness. It also reduced the proportion of carcass weight in the hind quarter and the proportions of bone and muscle in the ribs joint. None of these effects accompanied the increase in carcass weight due to higher EPD(CWT). It is concluded that BB have superior production traits to AA. Selection of sires for higher EPD(CWT) increases growth rate, kill-out proportion and carcass weight of progeny with little effect on carcass or muscle traits. The extra carcass weight due to higher EPD(CWT) is more valuable commercially than a comparable carcass weight increment from a delay in slaughter date because it comprises a higher proportion of muscle.     

Formulation of a decision support tool incorporating both genetic and non-genetic effects to rank young growing cattle on expected market value

While breeding indexes exist globally to identify candidate parents of the next generation, fewer tools exist that provide guidance on the expected monetary value of young animals. The objective of the present study was therefore to develop the framework for a cattle decision-support tool which incorporates both the genetic and non-genetic information of an animal and, in doing so, better predict the potential market value of an animal, whatever the age. Two novel monetary indexes were constructed and their predictive ability of carcass value was compared to that of the Irish national Terminal breeding index, typical of other terminal indexes used globally. A constructed Harvest index was composed of three carcass-related traits [i.e., 1) carcass weight, 2) carcass conformation and 3) carcass fat, each weighted by their respective economic value] and aimed at purchasers of animals close to harvest; the second index, termed the Calf index, also included docility and feed intake (weighted by their respective economic value), thus targeting purchasers of younger calves for growing (and eventually harvesting). Genetic and non-genetic fixed and random effect model solutions from the Irish national genetic evaluations underpinned all indexes. The two novel indexes were formulated using three alternative estimates of an animal's total merit for comparative purposes: 1) an index based solely on the animal's breed solutions, 2) an index which also included within-breed animal differences, and 3) an index which, as well as considering additive and non-additive genetic effects, also included non-genetic effects (referred to as production values [PVs]). As more information (i.e., within breed effects and subsequently non-genetic effects) was included in the total merit estimate, the correlations strengthened between the two proposed indexes and the animal's calculated carcass market value; the correlation coefficients almost doubled in strength when total merit was based on PV-based estimates as compared to the breed solutions alone. Including phenotypic live-weight data, collected during the animal's life, strengthened the predictive ability of the indexes further. Based on the results presented, the proposed indexes may fill the void in decision support when purchasing or selling cattle. In addition, given the dynamic nature of indexes, they have the potential to be updated in real-time as information becomes available.     

Predicting beef carcass meat,fat and bone proportions from carcass conformation and fat scores or hindquarter dissection

Equations for predicting the meat, fat and bone proportions in beef carcasses using the European Union carcass classification scores for conformation and fatness, and hindquarter composition were developed and their accuracy was tested using data from 662 cattle. The animals included bulls, steers and heifers, and comprised of Holstein–Friesian, early- and late-maturing breeds × Holstein–Friesian, early-maturing × early-maturing, late-maturing × early-maturing and genotypes with 0.75 or greater late-maturing ancestry. Bulls, heifers and steers were slaughtered at 15, 20 and 24 months of age, respectively. The diet offered before slaughter includes grass silage only, grass or maize silage plus supplementary concentrates, or concentrates offered ad libitum plus 1 kg of roughage dry matter per head daily. Following the slaughter, carcasses were classified mechanically for conformation and fatness (scale 1 to 15), and the right side of each carcass was dissected into meat, fat and bone. Carcass conformation score ranged from 4.7 to 14.4, 5.4 to 10.9 and 2.0 to 12.0 for bulls, heifers and steers, respectively; the corresponding ranges for fat score were 2.7 to 11.5, 3.2 to 11.3 and 2.8 to 13.3. Prediction equations for carcass meat, fat and bone proportions were developed using multiple regression, with carcass conformation and fat score both included as continuous independent variables. In a separate series of analyses, the independent variable in the model was the proportion of the trait under investigation (meat, fat or bone) in the hindquarter. In both analyses, interactions between the independent variables and gender were tested. The predictive ability of the developed equations was assed using cross-validation on all 662 animals. Carcass classification scores accounted for 0.73, 0.67 and 0.71 of the total variation in carcass meat, fat and bone proportions, respectively, across all 662 animals. The corresponding values using hindquarter meat, fat and bone in the model were 0.93, 0.87 and 0.89, respectively. The bias of the prediction equations when applied across all animals was not different from zero, but bias did exist among some of the genotypes of animals present. In conclusion, carcass classification scores and hindquarter composition are accurate and efficient predictors of carcass meat, fat and bone proportions.     

Non-linear recursive models for growth traits in the Pirenaica beef cattle breed

One of the main goals of selection schemes in beef cattle populations is to increase carcass weight at slaughter. Live weights at different growth stages are frequently used as selection criteria under the hypothesis that they usually have a high and positive genetic correlation with weight at slaughter. However, the presence of compensatory growth may bias the prediction ability of early weights for selection purposes. Recursive models may represent an interesting alternative for understanding the genetic and phenotypic relationship between weight traits during growth. For the purposes of this study, the analysis was performed for three different set of data from the Pirenaica beef cattle breed: weight at 120 days (W120) and at 210 days (W210); W120 and carcass weight at slaughter at 365 days (CW365); W210 and CW365. The number of records for each analysis was 8592, 4648 and 3234, respectively. A pedigree composed of 56323 individuals was also included. The statistical model comprised sex, year-season of birth, herd and slaughterhouse, plus a non-linear recursive dependency between traits. The dependency was modeled as a polynomial up to the 4th degree and models were compared using a Logarithm of Conditional Predictive Ordinates. The results of model comparison suggest that the best models were the 3rd degree polynomial for W120-W210 and W120-CW365 and the 2nd degree polynomial for W210-CW365. The posterior mean estimates for heritabilities ranged between 0.29 and 0.44 and the posterior mean estimates of the genetic correlations were null or very low, indicating that the relationship between traits is fully captured by the recursive dependency. The results imply that the predictive ability of the performance of future growth is low if it is only based on records of early weights. The usefulness of slaughterhouse records in beef cattle breeding evaluation is confirmed.     

The relationship of live animal muscular and skeletal scores, ultrasound measurements and carcass classification scores with carcass composition and value in steers

This study examined the relationship of muscular and skeletal scores and ultrasound measurements in the live animal, and carcass conformation and fat scores with carcass composition and value using 336 steers, slaughtered at 2 years of age. Live animal scores and measurements were recorded at 8 to 12 months of age and pre-slaughter. Following slaughter, each carcass was classified for conformation and fatness and the right side dissected into meat, fat and bone. Carcass conformation scores and fat scores were both measured on a continuous 15-point scale and ranged from 2.0 to 12.0 and from 2.8 to 13.3, respectively. Pre-slaughter muscular scores showed positive correlations (P < 0.001) ranging from 0.31 to 0.86 with carcass meat proportion, proportion of high-value cuts in the carcass, conformation score and carcass value, significant negative correlations with carcass fat (r = -0.13) and bone (r = -0.81) proportions, and generally low non-significant relationships with the proportion of high-value cuts in meat and carcass fat score. Pre-slaughter ultrasound muscle depth and carcass conformation score showed similar correlations with carcass traits to those using the pre-slaughter muscular scoring procedure. Pre-slaughter ultrasound fat depth showed positive correlations (P < 0.001) with carcass fat proportion (r = 0.59) and fat score (r = 0.63), and significant negative correlations (-0.23 to -0.50) with carcass meat and bone proportions, high-value cuts in the carcass and in meat, and carcass value. Pre-slaughter skeletal scores generally showed poor correlations ranging from -0.38 to 0.52 with the various carcass traits. Corresponding correlations (-0.26 to 0.44) involving records collected at 8 to 12 months of age were lower than those using pre-slaughter records. A one-unit increase in carcass conformation score increased carcass meat proportion and value by 11.2 g/kg and 5.6 cents/kg, respectively. Corresponding values for fat score were -8.2 g/kg and -5.1 cents/kg. In conclusion, both pre-slaughter live animal scores/measurements and carcass classification scores, explained an appreciable amount of the total variation in carcass meat, fat and bone proportions and carcass value, and a moderate amount of the variation in proportion of high-value meat cuts in the carcass.     

Genetic variation in wholesale carcass cuts predicted from digital images in cattle

The objective of this study was to quantify the genetic variation in carcass cuts predicted using digital image analysis in commercial cross-bred cattle. The data set comprised 38,404 steers and 14,318 heifers from commercial Irish herds. The traits investigated included the weights of lower value cuts (LVC), medium value cuts (MVC), high value cuts (HVC), very high value cuts (VHVC) and total meat weight. In addition, the weights of total fat and total bones were available on the steers. Heritability of carcass cut weights, within gender, was estimated using an animal linear model, whereas genetic and phenotypic correlations among cuts were estimated using a sire linear model. Carcass weight was included as a covariate in all models. In the steers, heritability ranged from 0.13 (s.e. = 0.02) for VHVC to 0.49 (s.e. = 0.03) for total bone weight, and in the heifers heritability ranged from 0.15 (s.e. = 0.04) for MVC to 0.72 (s.e. = 0.06) for total meat weight. The coefficient of genetic variation for the different cuts varied from 1.4% to 3.6%. Genetic correlations between the different cut weights were all positive and ranged from 0.45 (s.e. = 0.08) to 0.89 (s.e. = 0.03) in the steers, and from 0.47 (s.e. = 0.14) to 0.82 (s.e. = 0.06) in the heifers. Genetic correlations between the wholesale cut weights and carcass conformation ranged from 0.32 (s.e. = 0.06) to 0.45 (s.e. = 0.07) in the steers, and from 0.10 (s.e. = 0.12) to 0.38 (s.e. = 0.09) in the heifers. Genetic correlations between the same wholesale cut traits in steers and heifers ranged from 0.54 (s.e. = 0.14) for MVC to 0.79 (s.e. = 0.06) for total meat weight; genetic correlations between carcass weight and carcass classification for conformation and fat score in both genders varied from 0.80 to 0.87. The existence of genetic variation in carcass cut traits, coupled with the routine availability of predicted cut weights from digital image analysis, clearly shows the potential to genetically improve carcass value.     

Effect of cow replacement strategy on cow and calf performance in the beef herd

Two contrasting replacement strategies are used by Irish beef farmers to select replacement females – animals sourced from within the suckler beef herd and sourced from the dairy herd. The objective of this study was to investigate the effect of replacement strategy (i.e. beef v. beef×dairy (BDX)) on cow and calf performance using data from the national beef database across a range of beef and dairy breeds. The association between replacement strategy and calving difficulty score, calving interval, weaning weight, weaning price and all carcass traits was investigated using a mixed model. The effect of replacement strategy on cow survival, calving dystocia and calf perinatal mortality was quantified using logistic regression. Beef cows were older (10.92 days; P<0.001) at their first calving, but were 1.15 times (P<0.01) more likely to survive to a subsequent lactation compared with BDX cows. Calving interval was 1.53 days shorter (P<0.001) for BDX compared with beef cows. Greater calving difficulty and calving dystocia was associated with beef cows (P<0.001) relative to BDX. However, BDX were 1.36 times (P<0.001) more likely to have a dead calf at birth relative to beef cows. Calves weaned from BDX were heavier (18.49 kg; P<0.001) at weaning, reached slaughter 12.8 days earlier (P<0.001), had 7.99 kg heavier carcass (P<0.001) and a greater fat score (P<0.001) compared with the progeny of beef cows. Beef cow progeny had a superior conformation score (0.5; P<0.001) and achieved a greater price per kilogram (P<0.001) compared with progeny from BDX. Beef cull cows had a heavier carcass (5.58 kg), superior carcass conformation, greater carcass price per kilogram and greater overall carcass value (P<0.001) than BDX. Results from this study show that replacement strategy is of fundamental importance depending on the type of system implemented by farmers and consideration must be given to the traits of importance within the context of the individual production system.     

Relationships between lamb carcass quality traits measured by X-ray computed tomography and current UK hill sheep breeding goals

Genetic parameters were estimated between current UK hill sheep breeding goals and lamb carcass composition and muscularity traits derived using X-ray computed tomography (CT). To produce these estimates, a total of 648 lambs from two hill farms were CT scanned at weaning (ca 120 days of age), over 3 years, and total weights of carcass muscle (MUSC), fat (CFAT) and bone (BONE) and internal fat (IFAT) were predicted. Previously derived muscularity indices were also calculated for the hind leg (HLMI) and lumbar (LRMI) regions, to assess muscle shape. Data for current breeding goals (lamb performance and maternal traits) were also included from a total of 10 297 lamb records and 12 704 ewe records. Heritabilities were estimated for each trait and genetic and phenotypic correlations were calculated between each CT trait and other lamb or ewe traits. Moderate to high positive genetic correlations were found between CT-predicted tissue weights and breeding goals, which were also weights (lamb weaning weight, carcass weight, mature ewe weight, average weight of lambs reared by the ewe). CFAT was positively genetically correlated with ultrasound backfat depth at weaning (UFD) and subjective fatness grade at slaughter (MLCF), suggesting that carcass fat could be decreased using selection on any of these predictors. Ultrasound muscle depth at weaning (UMD) and subjective conformation score at slaughter (MLCC) had high genetic correlations with the muscularity indices (HLMI and LRMI), but correlations with MUSC were not significantly different from zero. This implies that selection to improve MLCC is likely to be increasing the 'roundness' of muscle shape in the high-priced carcass region, but having little impact on total lean meat yield. Correlations of CT traits with the other ewe traits (number of lambs weaned, number of lambs lost, longevity, fleece weight) were generally small or not significantly different from zero. The genetic parameters generated in this study can now be used in selection index calculations to assess the benefits of including lamb CT traits in future selection programmes for hill sheep.     

Visceral organ weights,digestion and carcass characteristics of beef bulls differing in residual feed intake offered a high concentrate diet

This study examined the relationship of residual feed intake (RFI) with digestion, body composition, carcass traits and visceral organ weights in beef bulls offered a high concentrate diet. Individual dry matter (DM) intake (DMI) and growth were measured in a total of 67 Simmental bulls (mean initial BW 431 kg (s.d.=63.7)) over 3 years. Bulls were offered concentrates (860 g/kg rolled barley, 60 g/kg soya bean meal, 60 g/kg molasses and 20 g/kg minerals per vitamins) ad libitum plus 0.8 kg grass silage DM daily for 105 days pre-slaughter. Ultrasonic muscle and fat depth, body condition score (BCS), muscularity score, skeletal measurements, blood metabolites, rumen fermentation and total tract digestibility (indigestible marker) were determined. After slaughter, carcasses and perinephric and retroperitoneal fat were weighed, carcasses were graded for conformation and fat score and weight of non-carcass organs, liver, heart, kidneys, lungs, gall bladder, spleen, reticulo-rumen full and empty and intestines full, were determined. The residuals of the regression of DMI on average daily gain (ADG), mid-test metabolic BW (BW^0.75) and the fixed effect of year, using all animals, were used to compute individual RFI coefficients. Animals were ranked on RFI and assigned to high (inefficient), medium or low groupings. Overall mean ADG and daily DMI were 1.6 kg (s.d.=0.36) and 9.4 kg (s.d.=1.16), respectively. High RFI bulls consumed 7 and 14% more DM than medium and low RFI bulls, respectively (P<0.001). No differences between high and low RFI bulls were detected (P>0.05) for ADG, BW, BCS, skeletal measurements, muscularity scores, ultrasonic measurements, carcass weight, perinephric and retroperitoneal fat weight, kill-out proportion and carcass conformation and fat score. However, regression analysis indicated that a 1 kg DM/day increase in RFI was associated with a decrease in kill-out proportion of 20 g/kg (P<0.05) and a decrease in carcass conformation of 0.74 units (P<0.05). Weight of non-carcass organs did not differ (P>0.05) between RFI groups except for the empty weight of reticulo-rumen, which was 8% lighter (P=0.05) in low RFI compared with high RFI bulls. Regression analysis indicated that a 1 kg DM/day increase in RFI was associated with a 1 kg increase in reticulo-rumen empty weight (P<0.05). Of the visceral organs measured, the reticulo-rumen may be a biologically significant contributory factor to variation in RFI in beef bulls finished on a high concentrate diet.     

Colour differences among carcasses graded with similar score for conformation and fatness

In a population of 268 yearling bulls, those carcasses graded as U-, U0 or U+ for beef carcass conformation (n = 240) and those graded as 2-, 20 or 2+ for beef carcass fatness (n = 213) were selected to study the efficiency of carcass weight, carcass dimensions and instrumental colour of latissimus dorsi, rectus abdominis and subcutaneous fat, to discriminate among these carcass grades, in a population of high-muscled and very lean carcasses from young bulls. The increase in conformation grade meant an increase in carcass weight and perimeter of the leg. Classifiers use attributes characterizing muscular development and carcass profiles from a general impression of the whole carcass. There were no significant differences for carcass weight or carcass dimensions, among the carcasses classified according to the three fat classes. The a* and b* coordinate values for the latissimus dorsi muscle were observed to decrease significantly as the carcass conformation score increased (P < 0.05). However, muscle and subcutaneous fat of fatter carcasses showed higher a*, b* colour coordinates and chroma (C*) values than leaner carcasses. The CIE (Commission International de l'éclairage) L*, a* and b* colour coordinate measurements taken on the carcasses 45 min post mortem varied significantly from the readings taken after hanging for 24 h (P < 0,001). The higher a* and b* values on the carcasses chilled for 24 h could be caused by oxygenation of both subcutaneous fat, and latissimus dorsi and rectus abdominis muscles in the time elapsing after slaughter and after carcass exposition to circulating air in the cooler for 24 h. Lightness of the latissimus dorsi muscle underwent a decrease, compared with an increase in the rectus abdominis muscle. Hardening of the subcutaneous fat during cold storage may exert an influence on the decrease in lightness observed. These differences in carcass colour during chilling storage would suggest that the relationship between carcass colour and conformation grades was higher shortly after slaughter. Both L* colour coordinate of fat colour (P < 0.01) and a*, b* and C* colour coordinates of latissimus dorsi muscle (P < 0.05) were related to conformation classification. Colour was more efficient to differentiate conformation than fat cover classes. Sixty-two percent of carcasses were correctly classified for conformation by colour differences but only 37% of carcasses were correctly classified for fatness by colour.     

Body traits,carcass characteristics and price of cull cows as affected by farm type,breed, age and calving to culling interval

Beef production from cull cows is an additional source of income for dairy farms and greatly contributes to red meat production, but the sources of variation of live animal characteristics and the carcass traits of cull cows have rarely been examined. This study investigated the effects of the farm type, breed, age at slaughter (AGE) and calving to culling interval (Calv_Cull) on the body traits and carcass characteristics of dairy and dual-purpose cull cows. Data from 555 cull cows from 182 herds belonging to five farm types, characterised by a combination of housing and feeding systems, were recorded and analysed. Dairy breeds, such as Holstein Friesian and Brown Swiss, and dual-purpose breeds (Simmental, Rendena) were included in the trait assessments. The day before slaughter, the cows were weighed and scored for body condition (BCS) and fleshiness, and then, their heart girth and wither height were measured. At the slaughterhouse, the carcass weight (CW), dressing percentage (DP), carcass conformation and fatness scores, carcass price per kg and carcass total value were obtained. On average, the cows were slaughtered at nearly 71±27 months of age, 285±187 days after the last calving; 615±95 kg BW; and provided a 257±51 kg CW. Nearly 50% of the cows fell within the BCS range of 2.75 to 3.50, and the carcasses were mostly graded in the lowest class of conformation and fatness scores. Cull cows from free-stall farms had a higher DP, carcass conformation score and price than those from traditional tie-stall farms. The breed influenced the AGE, live animal characteristics and carcass traits. Cows from dairy breeds were younger at slaughter, had a lower BCS and fleshiness, and greater body measurements, but a lower DP and carcass price than those from dual-purpose breeds, although differences between the breeds were found within both groups. The age of the cows at slaughter influenced the Calv_Cull and increased the BW, body measurements and CW, but not the fleshiness and fatness appreciation (both in vivo and postmortem) or carcass price. The increasing Calv_Cull improved the BW, BCS, fleshiness, CW and carcass conformation and fatness. In conclusion, the decision to cull dairy cows should also take into account the factors that affect their carcass value in regards to improving the carcass price of cows.