One-step homogeneous non-stripping chemiluminescence metal immunoassay based on catalytic activity of gold nanoparticles

The catalytic activity of gold nanoparticles (AuNPs) on a luminol–H₂O₂ chemiluminescence (CL) system is found to be greatly enhanced after its crosslinking aggregation induced by immunoreaction. Based on this observation, a one-step homogeneous non-stripping CL metalloimmunoassay was designed. In the presence of corresponding antigen (Ag), the immunoreaction caused the aggregation of antibody (Ab)-modified AuNPs, and these crosslinking aggregated AuNPs could catalyze luminol–H₂O₂ CL reaction to produce a much stronger CL signal than dispersed Ab-modified AuNPs. The assay, including immunoreaction and detection, can be accomplished in homogeneous solution. In the assay, no tedious and strict stripping of metal nanoparticles, difficult synthesis of labels, multiple steps of immunoreactions and washings, and complicated magnetic separation process were required. The detection limit of human immunoglobulin G (IgG, 3σ) was estimated to be as low as 3.2 × 10⁻¹¹ g ml⁻¹. The sensitivity was increased by two orders of magnitude over that of other AuNP-based CL immunoassay. The current CL metalloimmunoassay offers the advantages of being simple, cheap, rapid, and sensitive.     

Development of neuraminidase detection using gold nanoparticles boron-doped diamond electrodes

Gold nanoparticles-modified boron-doped diamond (AuNPs–BDD) electrodes, which were prepared with a self-assembly deposition of AuNPs at amine-terminated boron-doped diamond, were examined for voltammetric detection of neuraminidase (NA). The detection method was performed based on the difference of electrochemical responses of zanamivir at gold surface before and after the reaction with NA in phosphate buffer solution (PBS, pH 5.5). A linear calibration curve for zanamivir in 0.1 M PBS in the absence of NA was achieved in the concentration range of 1 × 10⁻⁶ to 1 × 10⁻⁵ M (R² = 0.99) with an estimated limit of detection (LOD) of 2.29 × 10⁻⁶ M. Furthermore, using its reaction with 1.00 × 10⁻⁵ M zanamivir, a linear calibration curve of NA can be obtained in the concentration range of 0–12 mU (R² = 0.99) with an estimated LOD of 0.12 mU. High reproducibility was shown with a relative standard deviation (RSD) of 1.14% (n = 30). These performances could be maintained when the detection was performed in mucin matrix. Comparison performed using gold-modified BDD (Au–BDD) electrodes suggested that the good performance of the detection method is due to the stability of the gold particles position at the BDD surface.     

Effects of Mn on oligonucleotide-gold nanoparticle hybrids for colorimetric sensing of Hg: Improving colorimetric sensitivity and accelerating color change

In this paper, we present a simple and rapid colorimetric assay – using the polythymine oligonucleotide T₃₃, citrate-capped gold nanoparticles (AuNPs), and phosphate-buffer saline (PBS) in the presence of Mn²⁺ – for the highly selective and sensitive detection of Hg²⁺ in an aqueous solution. Citrate-capped AuNPs adsorbed on randomly coiled T₃₃ were dispersed well in PBS because of strong electrostatic repulsion between DNA molecules. In the presence of Hg²⁺, the formation of Hg²⁺–T₃₃ complexes enabled the removal of T₃₃ molecules from the NP surface, resulting in salt-induced NP aggregation. However, the T₃₃-capped AuNPs (T₃₃-AuNPs) were dispersed in PBS solution after the addition of 1.0 μM Hg²⁺, indicating that T₃₃-AuNPs had poor colorimetric sensitivity toward Hg²⁺. We uncovered that the addition of Mn²⁺ to a solution containing 0.75 nM T₃₃-AuNPs and 0.2× PBS resulted in an acceleration of the analysis time (within 5 min) and a 100-fold sensitivity improvement for the detection of Hg²⁺. As a result, the present approach enables the analysis of Hg²⁺ with a minimum detectable concentration that corresponds to 10 nM. This is probably attributed to that Mn²⁺ binds strongly to the phosphate backbone of DNA, thereby accelerating Hg²⁺-induced aggregation of the T₃₃-AuNPs. Because Mn²⁺ can stabilize the folded structure of the Hg²⁺–T₃₃ complex, Hg²⁺ facilitates the removal of T₃₃ from the NP surface in the presence of Mn²⁺. This probe was successfully applied to the determination of Hg²⁺ in pond water.     

Characterization of the Interaction between Diferric Transferrin and Transferrin Receptor 2 by Functional Assays and Atomic Force Microscopy

Transferrin receptor 2 (TfR2), a homologue of the classical transferrin receptor 1 (TfR1), is found in two isoforms, α and β. Like TfR1, TfR2α is a type II membrane protein, but the β form lacks transmembrane portions and therefore is likely to be an intracellular protein. To investigate the functional properties of TfR2α, we expressed the protein with FLAG tagging in transferrin-receptor-deficient Chinese hamster ovary cells. The association constant for the binding of diferric transferrin (Tf) to TfR2α is 5.6 × 10⁶ M^− 1, which is about 50 times lower than that for the binding of Tf to TfR1, with correspondingly reduced rates of iron uptake. Evidence for Tf internalization and recycling via TfR2α without degradation, as in the TfR1 pathway, was also found. The interaction of TfR2α with Tf was further investigated using atomic force microscopy, a powerful tool used for investigating the interaction between a ligand and its receptor at the single-molecule level on the living cell surface. Dynamic force microscopy reveals a difference in the interactions of Tf with TfR2α and TfR1, with Tf-TfR1 unbinding characterized by two energy barriers, while only one is present for Tf-TfR2. We speculate that this difference may reflect Tf binding to TfR2α by a single lobe, whereas two lobes of Tf participate in binding to TfR1. The difference in the binding properties of Tf to TfR1 and TfR2α may help account for the different physiological roles of the two receptors.     

Aptamer-based colorimetric biosensing of Ochratoxin A using unmodified gold nanoparticles indicator

This work presents an aptasensor for Ochratoxin A (OTA) using unmodified gold nanoparticles (AuNPs) indicator. The assay method is based on the conformation change of OTA's aptamer in phosphate buffered saline (PBS) containing Mg(2+) and OTA, and the phenomenon of salt-induced AuNPs aggregation. A single measurement took only five minutes. Circular dichroism spectroscopic experiments revealed for the first time that upon the addition of OTA, the conformation of OTA's aptamer in PBS buffer changed from random coil structure to compact rigid antiparallel G-quadruplex structure. This compact rigid G-quadruplex structure could not protect AuNPs against salt-induced aggregation, and thus the color change from red to blue could be observed by the naked eye. The linear range of the colorimetric aptasensor covered a large variation of OTA concentration from 20 to 625 nM and the detection limit of 20 nM (3σ) was obtained.     

Graphene oxide supported rhombic dodecahedral Cu2O nanocrystals for the detection of carcinoembryonic antigen

In this work, a simple electrochemical immunosensor was developed for the detection of carcinoembryonic antigen (CEA) based on rhombic dodecahedral Cu₂O nanocrystals–graphene oxide–gold nanoparticles (rCu₂O–GO–AuNPs). GO as the template and surfactant resulting in rCu₂O exhibit improved rhombic dodecahedral structure uniformity and excellent electrochemical performance. Moreover, GO was found to be able to effectively improve the long stability of rCu₂O on the electrode response. Under optimal conditions, the immunosensor showed a low limit of detection (0.004 ng ml⁻¹) and a large linear range (0.01–120 ng ml⁻¹). This work presents a potential alternative for the diagnostic applications of GO-supported special morphology materials in biomedicine and biosensors.     

Colorimetric detection of melamine in milk by citrate-stabilized gold nanoparticles

Here, we report a simple and sensitive colorimetric method for detection of melamine in milk using gold nanoparticles (AuNPs). AuNPs of 21-nm size were synthesized by the citrate reduction method. The method is based on the principle that the melamine causes the aggregation of AuNPs and, hence, the wine red color of AuNPs changes to blue or purple. This change in color can be visualized with the naked eye or an ultraviolet–visible (UV–Vis) spectrometer. Under optimized conditions, AuNPs are highly specific for melamine and can detect melamine down to a concentration of 0.05 mg L⁻¹.     

RPTPα and PTPε signaling via Fyn/Yes and RhoA is essential for zebrafish convergence and extension cell movements during gastrulation

Convergence and extension (C&E) cell movements are essential to shape the body axis during vertebrate gastrulation. We have used the zebrafish to assess the role of the receptor protein-tyrosine phosphatases, RPTPα and PTPε, in gastrulation cell movements. Both RPTPα and PTPε knockdown and ptpra^−/− embryos show defects in C&E movements. A method was developed to track gastrulation cell movements using confocal microscopy in a quantitative manner and ptpra^−/− embryos displayed reduced convergence as well as extension speeds. RPTPα and PTPε knockdowns cooperated with knockdown of a well known factor in C&E cell movement, non-canonical Wnt11. RPTPα and PTPε dephosphorylate and activate Src family kinases in various cell types in vitro and in vivo. We found that Src family kinase phosphorylation was enhanced in ptpra^−/− embryos, consistent with reduced Src family kinase activity. Importantly, both ptpra^−/− and RPTPα and PTPε knockdown induced C&E defects were rescued by active Fyn and Yes. Moreover, active RhoA rescued the RPTPα and PTPε knockdown and ptpra^−/− induced gastrulation cell movement defects as well. Our results demonstrate that RPTPα and PTPε are essential for C&E movements in a signaling pathway parallel to non-canonical Wnts and upstream of Fyn, Yes and RhoA.     

Amplified electrochemical aptasensor for thrombin based on bio-barcode method

In the present study, an electrochemical aptasensor for highly sensitive detection of thrombin was developed based on bio-barcode amplification assay. For this proposed aptasensor, capture DNA aptamerI was immobilized on the Au electrode. The functional Au nanoparticles (DNA–AuNPs) are loaded with barcode binding DNA and aptamerII. Through the specific recognition for thrombin, a sandwich format of Au/aptamerI/thrombin/DNA–AuNPs was fabricated. After hybridization with the PbSNPs-labeled barcode DNA, the assembled sensor was obtained. The concentration of thrombin was monitored based on the concentration of lead ions dissolved through differential pulse anodic stripping voltammetric (DPASV). Under optimum conditions, a detection limit of 6.2 × 10⁻¹⁵ mol L⁻¹ (M) thrombin was achieved. In addition, the sensor exhibited excellent selectivity against other proteins.     

An electrochemical aptasensor electrocatalyst for detection of thrombin

This work reports a novel signal amplification strategy based on three-dimensional ordered macroporous C₆₀-poly(3,4-ethylenedioxythiophene)-1-butyl-3-methylimidazolium hexafluorophosphate (3DOM C₆₀-PEDOT-[BMIm][BF₆]) for ultrasensitive detection of thrombin by cascade catalysis of Au-PEDOT@SiO₂ microspheres and alcohol dehydrogenase (ADH). Au-PEDOT@SiO₂ microspheres were constructed not only as nanocarriers to anchor the large amounts of secondary thrombin aptamers but also as nanocatalysts to catalyze the oxidation of ethanol efficiently. Significantly, the electrochemical signal was greatly enhanced based on cascade catalysis: First, ADH catalyzed the oxidation of ethanol to acetaldehyde with the concomitant generation of NADH in the presence of β-nicotinamide adenine dinucleotide hydrate (NAD⁺). Then, gold nanoparticles (AuNPs) as nanocatalysts could effectively catalyze NADH to produce NAD⁺ with the help of PEDOT as redox probe. Under the optimal conditions, the proposed aptasensor exhibits a linear range of 2 × 10⁻¹³ to 2 × 10⁻⁸ M with a low detection limit of 2 × 10⁻¹⁴ M for thrombin detection and shows high sensitivity and good specificity.     

An aptamer based resonance light scattering assay of prostate specific antigen

Prostate specific antigen (PSA) is a valuable tumor marker for prostate cancer screening. In this work, a novel and sensitive resonance light scattering (RLS) spectral assay of PSA was proposed based on PSA aptamer modified gold nanoparticles (AuNPs). The sulfhydryl modified single-strand aptamer could interact with AuNPs, which made the AuNPs stable in high concentration of salt. In pH 7.0 BR buffer solution, the highly selective combination of PSA and AuNPs-labeling aptamer resulted in the aggregation of AuNPs which showed high RLS intensity. Under the optimal conditions, the magnitude of enhanced RLS intensity (ΔI(RLS)) was proportional to the concentration of PSA in the range from 0.13 to 110 ng/mL, with a detection limit (LOD, 3σ) of 0.032 ng/mL. This developed RLS assay as well as a commercially available enzyme-linked immunosorbent assay (ELISA) kit was successfully applied to the detection of PSA in 15 serum samples, and an excellent correlation of the levels of PSA measured was obtained. This is the first report of the aptamer based RLS assay for PSA and it is also a significant application of instrumental analysis technique.     

One-pot Preparation of Creatinine-functionalized Gold Nanoparticles for Colorimetric Detection of Silver Ions

Creatinine-functionalized AuNPs (CreAuNPs) were prepared via a facile one-pot reaction of sodium borohydride and the mixture solution of gold(III) chloride trihydrate and creatinine. The morphology and surface state of as-prepared CreAuNPs were characterized by transmission electron microscopy and Fourier transform infrared spectroscopy. All the results demonstrated that CreAuNPs were spherical with an average diameter of about 4.2 nm, and creatinine existed on the surface of AuNPs via Au-N interaction. The as-prepared CreAuNPs exhibited a weak surface plasmon resonance (SPR) absorption owing to their small size, while the addition of Ag⁺ could induce the aggregation of spherical CreAuNPs, producing a strong SPR absorption and apparent color change from colorless to purple owing to the surface plasmon coupling. On this basis, a colorimetric assay for Ag⁺ was established. The assay could selectively detect Ag⁺ as low as 1 μM with a good linearity in the range of 5–40 μM. Additionally, the assay was successfully applied to the determination of Ag⁺ in tap water, lake water, and river water samples.

     

BSA–AuNPs@Tb–AMP metal–organic frameworks for ratiometric fluorescence detection of DPA and Hg2+

An easy and effective strategy for synthesizing a ratiometric fluorescent nanosensor has been demonstrated in this work. Novel fluorescent BSA–AuNPs@Tb–AMP (BSA, bovine serum albumin; AMP, adenosine 5′‐monophosphate; AuNPs, Au nanoparticles) metal–organic framework (MOF) nanostructures were synthesized by encapsulating BSA–AuNPs into Tb–AMP MOFs for the detection of 2,6‐pyridinedicarboxylic acid (DPA) and Hg²⁺. DPA could strongly co‐ordinate with Tb³⁺ to replace water molecules from the Tb³⁺ center and accordingly enhanced the fluorescence of Tb–AMP MOFs. The fluorescence of BSA–AuNPs at 405 nm remained constant. While the fluorescence of BSA–AuNPs at 635 nm was quenched after Hg²⁺ was added, the fluorescence of Tb–AMP MOFs remained constant. Accordingly, a ratiometric fluorescence nanosensor was constructed for detection of DPA and Hg²⁺. The ratiometric nanosensor exhibited good selectivity to DPA over other substances. The F₅₄₅/F₄₀₅ linearly increased with increase of DPA concentration in the range of 50 nM to 10 μM with a detection limit as low as 17.4 nM. F₆₃₅/F₄₀₅ increased linearly with increase of Hg²⁺ concentration ranging from 50 nM to 1 μM with a detection limit as low as 20.9 nM. Additionally, the nanosensor could be successfully applied for the determination of DPA and Hg²⁺ in running water.     

Colorimetric detection of bisphenol A based on unmodified aptamer and cationic polymer aggregated gold nanoparticles

In this study, a colorimetric method was exploited to detect bisphenol A (BPA) based on BPA-specific aptamer and cationic polymer-induced aggregation of gold nanoparticles (AuNPs). The principle of this assay is very classical. The aggregation of AuNPs was induced by the concentration of cationic polymer, which is controlled by specific recognition of aptamer with BPA and the reaction of aptamer and cationic polymer forming “duplex” structure. This method enables colorimetric detection of BPA with selectivity and a detection limit of 1.50 nM. In addition, this colorimetric method was successfully used to determine spiked BPA in tap water and river water samples.     

Fabrication of nitrogen‐ and phosphorous‐doped carbon dots by the pyrolysis method for iodide and iron(III) sensing

A facile and novel strategy to synthesize nitrogen‐ and phosphorous‐doped carbon dots (NPCDs) by single step pyrolysis method is described here. Citric acid is used as carbon source and di‐ammonium hydrogen phosphate is used as both nitrogen and phosphorous sources, respectively. Through the extensive study on optical properties, morphology and chemical structures of the synthesized NPCDs, it is found that as‐synthesized NPCDs exhibited good excitation‐dependent luminescence property, spherical morphology and high stability. The obtained NPCDs are stable in aqueous medium and possess a quantum yield of 10.58%. In this work, a new assay method is developed to detect iodide ions using the synthesized NPCDs. Here, the inner filter effect is applied to detect the iodide ion and exhibited a wide linear response concentration range (10–60 μM) with a limit of detection (LOD) of 0.32 μM. Furthermore, the synthesized NPCDs are used for the selective detection of iron(III) (Fe³⁺) ions and cell imaging. Fe³⁺ ions sensing assay shows a detection range from 0.2 to 30 μM with a LOD of 72 nM. As an efficient photoluminescence sensor, the developed NPCDs have an excellent biocompatibility and low cytotoxicity, allowing Fe³⁺ ion detection in HeLa cells.     

Aptamer–nanoparticle-based chemiluminescence for p53 protein

A simple colorimetric biosensing technique based on the interaction of gold nanoparticles (AuNPs) with the aptamer was developed for detection of p53, a tumor suppressor protein, in the current study. Aggregation of AuNPs was induced by desorption of the p53 binding RNA aptamer from the surface of AuNPs as a result of the aptamer target interaction leading to the color change of AuNPs from red to purple. The detection limit of p53 protein by the colorimetric approach was 0.1 ng/ml after successful optimization of the amount of aptamer, AuNPs, salts, and incubation time. Furthermore, the catalytic activity of the aggregated AuNPs was greatly enhanced by chemiluminescence (CL) reaction, where the detection limit was enhanced to 10 pg/ml with a regression coefficient of R² = 0.9907. Here the sensitivity was increased by 10-fold compared with the AuNP-based colorimetric method. Hence, the sensitivity of detection was increased by employing CL, by using the catalytic activity of aggregated AuNPs, on the luminol–hydrogen peroxide reaction. Thus, the combination of colorimetric and CL-based aptasensor can be of great advantage in increasing the sensitivity of detection for any target analyte.