Impact of the third-strand orientation on the thermodynamic stability of the four-way DNA junction

The physical properties of a triple-helical DNA four-way junction J(T2T4) have been characterized by means of UV spectroscopy, CD spectroscopy, and differential scanning calorimetry (DSC). J(T2T4) is another four-way junction that was designed in addition to J(T1T3) (N. Makube and H. H. Klump (2000) Arch. Biochem. Biophys. 377, 31-42) to study the effects of third strands on the stability of the four-way junction with triple-helical arms. The pH titration curves illustrate the sequential folding of single strands to double-helical four-way junctions and finally the binding of third strands to their respective W-C duplexes. CD measurements confirm triplex formation under appropriate pH and ionic strength conditions. The CD spectra also suggest different melting patterns for the triple-helical arms of J(T2T4). The melting temperature as a function of pH or ionic strength characterizes the effect of the third strands on the structural stability. Increased sodium concentration and low pH conditions enhances and stabilizes the overall structure of the junction. The results also indicate that all triplexes in J(T2T4) are formed in the absence of salt and at low pH; however, the junction may, under these conditions, assume a conformation different from the one assumed in the presence of salt. Through the deconvolution of DSC data, the calorimetric enthalpies associated with melting of arms of the junctions were determined. The loops are designed to have the same enthalpic effect on the different arms. The stabilizing effect of the loops is more pronounced when those loops are shifted from arms 1 and 3 in J(T1T3) to arms 2 and 4 in J(T2T4) without changing any of the sequences. Overall, J(T2T4) is slightly more stable than J(T1T3). The differences can be attributed to sequence effects rather than structural effects. All the results illustrate that binding of the third strand in either of the two orientations 5'5'3' (J(T2T4)) or 5'3'3' (J(T1T3)) stabilizes the underlying double-helical four-way junction and its triple-helical arms.     

Thermodynamic properties of an intramolecular DNA four-way junction

We have investigated the thermodynamic properties of two homologous DNA four-way junctions, J4 and J4M, based on 46-mer linear DNA molecules. J4 and J4M have the same base sequence with the only difference that the latter contains an uncharged methylene-acetal linkage, -O3'-CH2-O5', instead of the phosphodiester linkage, -O3'-PO2-O5'-, between the residues T18 and C19. The comparison of the thermal unfolding of the J4 junction and J4M junction serves to investigate the effect of the uncharged methylene-acetal linkage on the stability of the junction. Our analysis is based on CD, UV absorbance spectroscopy, DSC, and chemical footprinting. The aim is to characterize in detail the structure and stability of the junctions. As demonstrated before by NMR, in the presence of 5 mM MgCl2 +/- 50 mM NaCl, both J4 and J4M form a complete four-way junction. This is now evidenced by protection from OsO4 cleavage (chemical footprinting). We can assume that full base pairing occurs throughout the arms even at the center of the junction. CD spectra suggest that the helices within the junctions adopt the regular B-DNA conformation. Almost identical melting temperatures and unfolding enthalpies are obtained for J4 and J4M both by UV and DSC. Furthermore, the Van't Hoff enthalpy (DeltaHVH) derived from UV melting equals the calorimetric enthalpy (DeltaHcal), which means that the melting process of the structures proceeds in a two-state manner. All results taken together support the conclusion that there are no major conformational and energetic differences between J4 and J4M. The inclusion of the uncharged methylene-acetal group into the junction has no effect on its stability.     

Gel electrophoretic analysis of the geometry of a DNA four-way junction

Branched DNA molecules (Holliday structures) are believed to be key intermediates in the process of homologous genetic recombination. However, despite the importance of such structures, their transient nature makes it difficult to analyze their physical properties. In an effort to evaluate several models for the geometry of such branched molecules, a stable, synthetic DNA four-way junction has been constructed. The geometry of the synthetic junction has been probed by gel electrophoresis, utilizing the fact that bent DNA molecules demonstrate reduced mobilities on polyacrylamide gels to an extent that varies with the degree of the bend angle. From the synthetic four-way junction, we have produced a set of molecules in which all combinations of two junction arms have been extended by 105 base-pairs. The electrophoretic mobilities of the extended junctions differ in a manner which indicates that the junction is not a completely flexible structure; nor is it tetrahedral or planar-tetragonal. Instead, the four strands that comprise the DNA four-way junction are structurally non-equivalent. The significance of these observations with regard to previous models for four-way junction geometry is discussed.     

Quantitation of metal ion and DNA junction binding to the Holliday junction endonuclease Cce1

Cce1 is a magnesium-dependent Holliday junction endonuclease involved in the resolution of recombining mitochondrial DNA in Saccharomyces cerevisiae. Cce1 binds four-way DNA junctions as a dimer, opening the junction into an extended, 4-fold symmetric structure, and resolves junctions by the introduction of paired nicks in opposing strands at the point of strand exchange. In the present study, we have examined the interactions of wild-type Cce1 with a noncleavable four-way DNA junction and metal ions (Mg(2+) and Mn(2+)) using isothermal titration calorimetry, EPR, and gel electrophoresis techniques. Mg(2+) or Mn(2+) ions bind to Cce1 in the absence of DNA junctions with a stoichiometry of two metal ions per Cce1 monomer. Cce1 binds to four-way junctions with a stoichiometry of two Cce1 dimers per junction molecule in the presence of EDTA, and one dimer of Cce1 per junction in 15 mM magnesium. The presence of 15 mM Mg(2+) dramatically reduces the affinity of Cce1 for four-way DNA junctions, by about 900-fold. This allows an estimation of DeltaG degrees for stacking of four-way DNA junction 7 of -4.1 kcal/mol, consistent with the estimate of -3.3 to -4.5 kcal/mol calculated from branch migration and NMR experiments [Overmars and Altona (1997) J. Mol. Biol. 273, 519-524; Panyutin et al. (1995) EMBO J. 14, 1819-1826]. The striking effect of magnesium ions on the affinity of Cce1 binding to the four-way junction is predicted to be a general one for proteins that unfold the stacked X-structure of the Holliday junction on binding.     

Conformation and protein interactions of intramolecular DNA and phosphorothioate four-way junctions

The objectives of this study are to evaluate the structure and protein recognition features of branched DNA four-way junctions in an effort to explore the therapeutic potential of these molecules. The classic immobile DNA 4WJ, J1, is used as a matrix to design novel intramolecular junctions including natural and phosphorothioate bonds. Here we have inserted H2-type mini-hairpins into the helical termini of the arms of J1 to generate four novel intramolecular four-way junctions. Hairpins are inserted to reduce end fraying and effectively eliminate potential nuclease binding sites. We compare the structure and protein recognition features of J1 with four intramolecular four-way junctions: i-J1, i-J1(PS1), i-J1(PS2) and i-J1(PS3). Circular dichroism studies suggest that the secondary structure of each intramolecular 4WJ is composed predominantly of B-form helices. Thermal unfolding studies indicate that intramolecular four-way junctions are significantly more stable than J1. The T_m values of the hairpin four-way junctions are 25.2° to 32.2°C higher than the control, J1. With respect to protein recognition, gel shift assays reveal that the DNA-binding proteins HMGBb1 and HMGB1 bind the hairpin four-way junctions with affinity levels similar to control, J1. To evaluate nuclease resistance, four-way junctions are incubated with DNase I, exonuclease III (Exo III) and T5 exonuclease (T5 Exo). The enzymes probe nucleic acid cleavage that occurs non-specifically (DNase I) and in a 5ʹ→3ʹ (T5 Exo) and 3ʹ→5ʹ direction (Exo III). The nuclease digestion assays clearly show that the intramolecular four-way junctions possess significantly higher nuclease resistance than the control, J1.     

Conformational preference and ligand binding properties of DNA junctions are determined by sequence at the branch

Four-arm DNA branched junctions are stable analogues of Holliday recombinational intermediates. A number of four-arm DNA junctions synthesized from oligonucleotides have now been studied. Gel mobility or chemical footprinting experiments on several immobile four-arm junctions indicate that in the presence of Mg2+, they assume a preferred conformation consisting of two helical domains, each formed by stacking a particular pair of arms on each other. We show here that a junction we designate as J1c that has the same chemical composition as one we have previously studied in detail, J1, but is formed from the four strands complementary to those of the latter, exhibits the reverse stacking preference. The pattern of self-protection of the strands of J1c exposed to Fe(II).EDTA-induced scission reveals that twofold symmetry is preserved, but the opposite pair of strands preferentially cross over. Moreover, the Fe(II).EDTA scission profiles of J1c indicate that this junction exhibits a weaker bias as to which strands cross over than is observed in J1. The preference for the dominant species in J1 is 1.3 times greater than in J1c at 4 degrees C and in the presence of 10 mM Mg2+, based on chemical reactivity data. This is confirmed by a cleavage experiment using the resolvase enzyme, endonuclease I, from bacteriophage T7. This difference could reflect either sequence-dependent differences in the equilibrium among isomers, or in the structure of these junctions. Chemical footprinting experiments using the probes MPE.Fe(II) and (OP)2Cu(I) show that the high-affinity ligand binding site in immobile junctions is determined by junction geometry.     

Resolution of Holliday junction analogs by T4 endonuclease VII can be directed by substrate structure

Endonuclease VII is an enzyme from bacteriophage T4 capable of resolving four-arm Holliday junction intermediates in recombination. Since natural Holliday junctions have homologous (2-fold) sequence symmetry, they can branch migrate, creating a population of substrates that have the branch point at different sites. We have explored the substrate requirements of endonuclease VII by using immobile analogs of Holliday junctions that lack this homology, thereby situating the branch point at a fixed site in the molecule. We have found that immobile junctions whose double-helical arms contain fewer than nine nucleotide pairs do not serve as substrates for resolution by endonuclease VII. Scission of substrates with 2-fold symmetrically elongated arms produces resolution products that are a function of the particular arms that are lengthened. We have confirmed that the scission products are those of resolution, rather than nicking of individual strands, by using shamrock junction molecules formed from a single oligonucleotide strand. A combination of end-labeled and internally labeled shamrock molecules has been used to demonstrate that all of the scission is due to coordinated cleavage of DNA on opposite sides of the junction, 3' to the branch point. Endonuclease VII is known to cleave the crossover strands of Holliday junctions in this fashion. The relationship of the long arms to the cleavage direction suggests that the portion of the enzyme which requires the minimum arm length interacts with the pair of arms containing the 3' portion of the crossover strands on the bound surface of the antiparallel junction.     

The melting behavior of a DNA junction structure: a calorimetric and spectroscopic study

We present an investigation of the helix–coil transition in a stable branched oligomer of DNA, known as an immobile DNA junction. This junction is composed of four 16-mer strands, which yield four double-helical arms, each containing 8 nucleotide pairs. Properties of the individual arms of this complex are modeled by four octameric duplexes. We have performed experiments using calorimetry, uv absorbance, and CD spectroscopy to characterize the melting transitions of the junction and each arm. By comparing our spectroscopic and calorimetric results on the junction and its component arms, we are able to conclude the following: (1) The calorimetric transition enthalpy for the overall junction complex is equal to the sum of the calorimetric transition enthalpies of the four constituent duplex arms. (2) The optical and the calorimetric measurements yield qualitatively similar, but not identical thermodynamic data. (3) The melting temperature of the junction is less dependent on concentration than the melting temperatures of the individual arms. We attribute this observation to the tetrameric nature of the junction. (4) The ratio of the calorimetric transition enthalpy of the junction and its corresponding van't Hoff value is close to unity. (5) The CD spectrum of the junction is equal quantitatively to the sum of the B-like CD spectra of the four constituent duplex arms.     

The construction of a trefoil knot from a DNA branched junction motif

A DNA trefoil (3₁) knot has been constructed from a 104-nucleotide molecule whose strands form a 3-arm branched junction motif. This construction tests the notion that a node in a DNA knot can be equated with a half-turn of double-helical DNA, and is consistent with that concept. Of five 104-mer sequences tested, only one produces high yields of the target knot. The other molecules produce larger quantities of circular material and of a knot containing more nodes. The key features that differentiate the successful design from the others are (1) the ligation takes place in the linker region between helical domains and (2) only six nucleotide pairs are used for each of the double-helical arms of the junction. The successful design separates the double-helical regions from each other by a spacer containing two deoxythymidine nucleotides at the site of the branched junction. © 1994 John Wiley & Sons, Inc.     

Charge transport through DNA four-way junctions

Long range oxidative damage as a result of charge transport is shown to occur through single crossover junctions assembled from four semi-complementary strands of DNA. When a rhodium complex is tethered to one of the arms of the four-way junction assembly, thereby restricting its intercalation into the π-stack, photo-induced oxidative damage occurs to varying degrees at all guanine doublets in the assembly, though direct strand scission only occurs at the predicted site of intercalation. In studies where the Mg²⁺ concentration was varied, so as to perturb base stacking at the junction, charge transport was found to be enhanced but not to be strongly localized to the arms that preferentially stack on each other. These data suggest that the conformations of four-way junctions can be relatively mobile. Certainly, in four-way junctions charge transport is less discriminate than in the more rigidly stacked DNA double crossover assemblies.     

The structure of the Holliday junction, and its resolution

The Holliday (four-way) junction is a critical intermediate in homologous genetic recombination. We have studied the structure of a series of four-way junctions, constructed by hybridization of four 80 nucleotide synthetic oligonucleotides. These molecules migrate anomalously slowly in gel electrophoresis. Each arm of any junction could be selectively shortened by cleavage at a unique restriction site, and we have studied the relative gel mobilities of species in which two arms were cleaved. The pattern of fragments observed argues strongly for a structure with two-fold symmetry, based on an X shape, the long arms of which are made from pairwise colinear association of helical arms. The choice of partners is governed by the base sequence at the junction, allowing a potential isomerization between equivalent structural forms. Resolvase enzymes can distinguish between these structures, and the resolution products are determined by the structure adopted, i.e., by the sequence at the junction. In the absence of cations, the helical arms of the junction are fully extended in a square configuration, and unstacking results in junction thymines becoming reactive to osmium tetroxide.     

Analysis of branched nucleic acid structure using comparative gel electrophoresis

Electrophoresis in polyacrylamide gels provides a simple yet powerful means of analyzing the relative disposition of helical arms in branched nucleic acids. The electrophoretic mobility of DNA or RNA with a central discontinuity is determined by the angle subtended between the arms radiating from the branchpoint. In a multi-helical branchpoint, comparative gel electrophoresis can provide a relative measure of all the inter-helical angles and thus the shape and symmetry of the molecule. Using the long-short arm approach, the electrophoretic mobility of all the species with two helical arms that are longer than all others is compared. This can be done as a function of conditions, allowing the analysis of ion-dependent folding of branched DNA and RNA species. Notable successes for the technique include the four-way (Holliday) junction in DNA and helical junctions in functionally significant RNA species such as ribozymes. Many of these structures have subsequently been proved correct by crystallography or other methods, up to 10 years later in the case of the Holliday junction. Just as important, the technique has not failed to date. Comparative gel electrophoresis can provide a window on both fast and slow conformational equilibria such as conformer exchange in four-way DNA junctions. But perhaps the biggest test of the approach has been to deduce the structures of complexes of four-way DNA junctions with proteins. Two recent crystallographic structures show that the global structures were correctly deduced by electrophoresis, proving the worth of the method even in these rather complex systems. Comparative gel electrophoresis is a robust method for the analysis of branched nucleic acids and their complexes.     

Crystal structure of an 82-nucleotide RNA-DNA complex formed by the 10-23 DNA enzyme

The structure of a large nucleic acid complex formed by the 10-23 DNA enzyme bound to an RNA substrate was determined by X-ray diffraction at 3.0 A resolution. The 82-nucleotide complex contains two strands of DNA and two strands of RNA that form five double-helical domains. The spatial arrangement of these helices is maintained by two four-way junctions that exhibit extensive base-stacking interactions and sharp turns of the phosphodiester backbone stabilized by metal ions coordinated to nucleotides at these junctions. Although it is unlikely that the structure corresponds to the catalytically active conformation of the enzyme, it represents a novel nucleic acid fold with implications for the Holliday junction structure.     

Construction of a synthetic Holliday junction analog and characterization of its interaction with a Saccharomyces cerevisiae endonuclease that cleaves Holliday junctions

We describe the construction and characterization of an oligonucleotide Holliday junction analog and characterize its interaction with a Saccharomyces cerevisiae endonuclease that cleaves Holliday junctions. A Holliday junction analog containing four duplex arms and 54 base pairs was constructed by annealing four unique synthetic oligonucleotides. Mixing curve analysis showed that the complex contained a 1:1:1:1 mol ratio of the four unique sequence strands. In addition, a linear duplex with a sequence identical to two of the junction arms was also constructed for use as a control fragment. High resolution gel exclusion chromatography was used to purify and characterize the synthetic junction. The synthetic Holliday junction was found to be a specific inhibitor of a S. cerevisiae enzyme that catalyzes the cleavage of Holliday junctions. Under standard cleavage conditions, 50% inhibition was observed at a synthetic Holliday junction to substrate ratio of 7/1, whereas no inhibition by linear duplex was observed at molar ratios in excess of 150/1. Kinetic analysis showed that Holliday junction was a competitive inhibitor of the reaction and had an apparent Ki = 2.5 nM, although the mode of inhibition was complex. The synthetic Holliday junction was not a substrate for the enzyme, but was found to form a specific complex with the enzyme as evidenced by polyacrylamide gel electrophoresis DNA binding assays.     

Construction of a DNA four-way junction: Design and NMR spectroscopy

In 1964 Holliday postulated the formation of cruciform structures (four-way junctions) in duplex DNA as intermediate in genetic recombination. Since then, many biochemical and biophysical investigations were directed at solving questions concerning structural details of stable four-way junctions. Thus far, NMR spectroscopy played a minor part in these investigations on account of the minimum size of the molecule (expressed as the number of nucleotide residues) that was thought necessary to produce a stable cruciform structure. Indeed, the smallest four-way junction studied thus far by NMR methods was built from four separate DNA strands, each containing 16 nucleotides, a total of 64. Obviously, with such a large structure one runs into assignment problems. We considered the possibility of constructing a stable four-way junction from a single strand of DNA. The underlying idea was to make use of our detailed knowledge of the building principles of stable minihairpin loops. These loops, containing only two nucleotides to bridge the gap between antiparallel strands, are maximally stable in DNA sequences like 5-d(-C-TT-G-), where C and G form a normal Watson-Crick base pair and the two T residues cross the minor groove to form the minihairpin loop. Three of such miniloops could in principle cap three arms of the cruciform. The fourth arm would have an open end. The problem to be solved is to find the minimum length that is required to insure stability of the three closed arms and of the fourth open arm. We were successful with a structure that has three short stems (four base pairs each) and an open-end stem consisting of eight base pairs, a total of 46 residues. NMR experiments, carried out on this molecule in the presence of Mg²⁺, showed details of folding which have never been observed before.     

The dynamic nature of the four-way junction of the hepatitis C virus IRES

Translation is initiated within the RNA of the hepatitis C virus at the internal ribosome entry site (IRES). The IRES is a 341-nucleotide element that contains a four-way helical junction (IIIabc) as a functionally important element of the secondary structure. The junction has three additional, nonpaired nucleotides at the point of strand exchange on one diagonal. We have studied the global conformation and folding of this junction in solution, using comparative gel electrophoresis and steady-state and time-resolved fluorescence resonance energy transfer. In the absence of divalent metal ions, the junction adopts an extended-square structure, in contrast to perfect four-way RNA junctions, which retain coaxial helical stacking under all conditions. The IIIabc junction is induced to fold on addition of Mg(2+), by pairwise coaxial stacking of arms, into the conformer in which the unpaired bases are located on the exchanging strands. Fluorescence lifetime measurements indicate that in the presence of Mg(2+) ions, the IIIabc junction exists in a dynamic equilibrium comprising approximately equal populations of antiparallel and parallel species. These dynamic properties may be important in mediating interactions between the IRES and the ribosome and initiation factors.     

Thermodynamics of DNA branching.

Branched DNA molecules arise transiently as intermediates in genetic recombination or on extrusion of cruciforms from covalent circular DNA duplexes that contain palindromic sequences. The free energy of these structures relative to normal DNA duplexes is of interest both physically and biologically. Oligonucleotide complexes that can form stable branched structures, DNA junctions, have made it possible to model normally unstable branched states of DNA such as Holliday recombinational intermediates. We present here an evaluation of the free energy of creating four-arm branch points in duplex DNA, using a system of two complementary junctions and four DNA duplexes formed from different combinations of the same set of eight 16-mer strands. The thermodynamics of formation of each branched structure from the matching pair of intact duplexes have been estimated in two experiments. In the first, labeled strands are allowed to partition between duplexes and junctions in a competition assay on polyacrylamide gels. In the second, the heats of forming branched or linear molecules from the component strands have been determined by titration microcalorimetry at several temperatures. Taken together these measurements allow us to determine the standard thermodynamic parameters for the process of creating a branch in an otherwise normal DNA duplex. The free energy for reacting two 16-mer duplexes to yield a four-arm junction in which the branch site is incapable of migrating is + 1.1 (+/- 0.4) kcal mol-1 (at 18 degrees C, 10 mM-Mg2+). Analysis of the distribution of duplex and tetramer products by electrophoresis confirms that the free energy difference between the four duplexes and two junctions is small at this temperature. The associated enthalpy change at 18 degrees C is +27.1 (+/- 1.3) kcal mol-1, while the entropy is +89 (+/- 30) cal K-1 mol-1. The free energy for branching is temperature dependent, with a large unfavorable enthalpy change compensated by a favorable entropy term. Since forming one four-stranded complex from two duplexes should be an entropically unfavorable process, branch formation is likely to be accompanied by significant changes in hydration and ion binding. A significant apparent delta Cp is also observed for the formation of one mole of junction, +0.97 (+/-0.05) kcal deg-1 mol-1.     

Targeting Holliday junctions by origin DNA-binding protein of herpes simplex virus type 1

In the present paper, the interactions of the origin binding protein (OBP) of herpes simplex virus type 1 (HSV1) with synthetic four-way Holliday junctions (HJs) were studied using electrophoresis mobility shift assay and the FRET method and compared with the interactions of the protein with duplex and single-stranded DNAs. It has been found that OBP exhibits a strong preference for binding to four-way and three-way DNA junctions and possesses much lower affinities to duplex and single-stranded DNAs. The protein forms three types of complexes with HJs. It forms complexes I and II which are reminiscent of the tetramer and octamer complexes with four-way junction of HJ-specific protein RuvA of Escherichia coli. The binding approaches saturation level when two OBP dimers are bound per junction. In the presence of Mg²⁺ ions (≥2 mM) OBP also interacts with HJ in the stacked arm form (complex III). In the presence of 5 mM ATP and 10 mM Mg²⁺ ions OBP catalyzes processing of the HJ in which one of the annealed oligonucleotides has a 3′-terminal tail containing 20 unpaired thymine residues. The observed preference of OBP for binding to the four-way DNA junctions provides a basis for suggestion that OBP induces large DNA structural changes upon binding to Box I and Box II sites in OriS. These changes involve the bending and partial melting of the DNA at A+T-rich spacer and also include the formation of HJ containing Box I and Box II inverted repeats and flanking DNA sequences.     

Structural recognition between a four-way DNA junction and a resolving enzyme

Resolving enzymes bind highly selectively to four-way DNA junctions, but the mechanism of this structural specificity is poorly understood. In this study, we have explored the role of interactions between the dimeric enzyme and the helical arms of the junction, using junctions with either shortened arms, or circular permutation of arms. We find that DNA-protein contacts in the arms containing the 5' ends of the continuous strands are very important, conferring a significant level of sequence discrimination upon both the choice of conformer and the order of strand cleavage. We have exploited these properties to obtain hydroxyl radical footprinting data on endonuclease I-junction complexes that are not complicated by the presence of alternative conformers, with results that are in good agreement with the arm permutation and shortening experiments. Substitution of phosphate groups at the center of the junction reveals the importance of electrostatic interactions at the point of strand exchange in the complex. Our data show that the form of the complex between endonuclease I and a DNA junction depends on the core of the junction and on interactions with the first six base-pairs of the arms containing the 5' ends of the continuous strands.     

DNA recombination: holliday junctions dynamics and branch migration

Holliday junctions are critical intermediates for homologous, site-specific recombination, DNA repair, and replication. A wealth of structural information is available for immobile four-way junctions, but the controversy on the mechanism of branch migration of Holliday junctions remains unsolved. Two models for the mechanism of branch migration were suggested. According to the early model of Alberts-Meselson-Sigal (Sigal, N., and Alberts, B. (1972) J. Mol. Biol. 71, 789-793 and Meselson, M. (1972) J. Mol. Biol. 71, 795-798), exchanging DNA strands around the junction remain parallel during branch migration. Kinetic studies of branch migration (Panyutin, I. G., and Hsieh, P. (1994) Proc. Natl. Acad. Sci. U. S. A. 91, 2021-2025) suggest an alternative model in which the junction adopts an extended conformation. We tested these models using a Holliday junction undergoing branch migration and time-lapse atomic force microscopy, an imaging technique capable of imaging DNA dynamics. The single molecule atomic force microscopy experiments performed in the presence and in the absence of divalent cations show that mobile Holliday junctions adopt an unfolded conformation during branch migration that is retained despite a broad range of motion in the arms of the junction. This conformation of the junction remains unchanged until strand separation. The data obtained support the model for branch migration having the extended conformation of the Holliday junction.