Syntheses, characterization, and in vitro degradation of ethyl cellulose-graft-poly(epsilon-caprolactone)-block-poly(L-lactide) copolymers by sequential ring-opening polymerization

Well-defined ethyl cellulose-graft-poly(epsilon-caprolactone) (EC-g-PCL) graft copolymers were successfully synthesized via ring-opening polymerization (ROP) of epsilon-caprolactone (CL) with an ethyl cellulose (EC) initiator and a tin 2-ethylhexanoate (Sn(Oct)2) catalyst in xylene at 120 degrees C. Then, novel ethyl cellulose-graft-poly(epsilon-caprolactone)-block-poly(L-lactide) (EC-g-PCL-b-PLLA) graft-block copolymers were prepared by ROP of L-lactide (L-LA) with a hydroxyl-terminated EC-g-PCL macroinitiator and Sn(Oct)2 catalyst in bulk at 120 degrees C. Various graft and block lengths of EC-g-PCL and EC-g-PCL-b-PLLA copolymers were obtained by adjusting the molar ratios of CL monomer to EC and the L-LA monomer to CL. The thermal properties and crystalline morphologies of EC-g-PCL and EC-g-PCL-b-PLLA copolymers were different from those of linear PCL. The in vitro degradation rate of EC-g-PCL-b-PLLA was faster than those of linear PCL and EC-g-PCL due to the presence of PLLA blocks.     

Enzymatic degradation of block copolymers prepared from epsilon-caprolactone and poly(ethylene glycol)

Block copolymers were prepared by ring-opening polymerization of epsilon-caprolactone in the presence of monohydroxyl or dihydroxyl poly(ethylene glycol) (PEG), using Zn powder as catalyst. The resulting poly(epsilon-caprolactone) (PCL)-PEG diblock and PCL-PEG-PCL triblock copolymers were characterized by various analytical techniques such as NMR, size-exclusion chromatography, differential scanning calorimetry, and X-ray diffraction. Both copolymers were semicrystalline polymers, the crystalline structure being of the PCL type. Films were prepared by casting dichloromethane solutions of the polymers on a glass plate. Square samples with dimensions of 10 x 10 mm were allowed to degrade in a pH = 7.0 phosphate buffer solution containing Pseudomonas lipase. Data showed that the introduction of PEG blocks did not decrease the degradation rate of poly(epsilon-caprolactone).     

Acid catalyzed transesterification as a route to poly(3-hydroxybutyrate-co-epsilon-caprolactone) copolymers from their homopolymers

Copolymers of (R)-3-hydroxybutyric acid (HB) and epsilon-caprolactone (CL) with a composition ranging from 28 to 81 mol % of HB were synthesized by transesterification of the corresponding homopolymers in solution in the presence of 4-toluenesulfonic acid. The copolyesters were characterized with regard to their molecular weights, thermal properties, molar compositions, and average block length of repeating units by gel permeation chromatography (GPC), differential scanning calorimetry, (1)H NMR, and (13)C NMR, respectively. Random and microblock copolymers could be obtained depending on experimental conditions, with weight-average molecular weights of up to 20,000. The glass transition temperature decreased from 2 to -42 degrees C as the CL content was increased from 0 to 72 mol %. The melting temperature (T(m)) of the PCL phase decreased from 70 to 46 degrees C as the HB content changed from 0 to 47 mol %, while the T(m) of the PHB phase decreased from 177 degrees C to 163 degrees C as the CL content changed from 0 to 72 mol %. Matrix-assisted laser desorption ionization time-of-flight mass spectra of GPC fractionated samples allowed us to ascertain that copolymers rich in HB units have mostly hydroxyl and carboxyl end groups, while copolymers rich in CL units have mostly tosyl and carboxyl end groups.     

Novel amphiphilic poly(epsilon-caprolactone)-g-poly(L-lysine) degradable copolymers

As part of the search of novel degradable polymers, amphiphilic and cationic poly(epsilon-caprolactone)-g-poly(l-lysine) (PCL-g-PlL) copolymers have been synthesized following a grafting "onto" or a grafting "from" method both applied to a macropolycarbanionic PCL derivative. The first approach led to PCL-g-PZlL containing 36% of epsilon-caprolactone and 64% of N-epsilon-Z-l-lysine units, by reaction of activated poly(N-epsilon-Z-l-lysine) on the macropolycarbanion derived from PCL. The second route was based on the anionic ring opening polymerization of N-carboxyanhydride of N-epsilon-benzyloxycarbonyl-l-lysine initiated by the macropolycarbanion derived from PCL and led to a similar copolymer containing 45% of of epsilon-caprolactone and 55% of N-epsilon-Z-l-lysine units. After deprotection of the lysine units, PCL-g-PlL copolymers were obtained. These copolymers are water-soluble and form nanometric micelle-like objects with mean diameters between 60 and 500 nm in distilled water depending on the synthesis route.     

Chemical composition distribution of bacterial copolyesters.

Poly(3-hydroxybutyrate) [P(3HB)] and its copolymers with hydroxyalkanoates are naturally occurring thermoplastic materials produced by bacteria. There are many potential uses for these copolyesters owing to their biodegradability and biocompatibility. The physical properties of the copolyesters vary depending on the chemical structure as well as the composition of the comonomers. Usually, we expect, copolymers to have a narrow chemical composition distribution (CCD). Several reports, however, have pointed out that some bacterial copolyesters have broad and/or multimodal CCD. Fractionation based on the chemical composition has also been reported for several bacterial copolyester samples. In this review, the literature concerning CCD and fractionation based on chemical composition is summarized. The width of CCD is approximated based on the data of diad sequence distribution. Generality of the complex CCD in bacterial copolyesters is also discussed.     

Structure-property relationships of copolymers obtained by ring-opening polymerization of glycolide and epsilon-caprolactone. Part 1. Synthesis and characterization

A series of copolymers with various compositions were synthesized by bulk ring-opening polymerization of glycolide and epsilon-caprolactone, using stannous (II) octoate or zirconium (IV) acetylacetonate as initiator. Reaction time and temperature were varied so as to induce different chain microstructures. The resulting copolymers were characterized by (1)H NMR, SEC, DSC, and X-ray diffraction. The average lengths of glycolyl (L(G)) and caproyl sequences (L(C)) and the degree of randomness (R) were calculated and compared to the values of completely random chains. The concentration of CGC sequences was also obtained which resulted from transesterification reactions. Data showed that stannous (II) octoate leads to less transesterification than zirconium (IV) acetylacetonate, and lower temperatures lead to less transesterification than higher ones. The copolymers exhibited a more or less blocky chain structure because of the reactivity difference between glycolide and epsilon-caprolactone. The crystalline structure and thermal properties depend on both the composition and the chain microstructure. PGA- and PCL-type crystallites were obtained for copolymers with intermediate compositions.     

Nanoaggregates of biodegradable amphiphilic random polycations for delivering water-insoluble drugs

Cationic amphiphilic random copolyesters were obtained by copolymerization of 5-Z-amino-δ-valerolactone and ε-caprolactone. The amino content of the final copolymers was controlled by the polymerization feed ratio and was in the range 10 to 100%. Copolymers solubility and aggregation behavior was assessed by conductometric and zeta potential analyses. A critical aggregation concentration of ca. 0.05% (w/v) was found for all water-soluble copolymers that formed nanoaggregates. Two populations were found to be present in equilibrium with hydrodynamic diameters in the range of 30-50 and 100-250 nm. The capacity to use the amphiphilic and cationic character of the nanoaggregates to encapsulate highly hydrophobic compounds was further investigated. Finally, copolymers hemo- and cytocompatibility were evaluated by hemagglutination, hemolysis, and cells proliferation tests. The results showed that the proposed cationic amphiphilic random copolyesters are biocompatible.     

Synthesis, cocrystallization, and enzymatic degradation of novel poly(butylene-co-propylene succinate) copolymers

A series of poly(butylene-co-propylene succinate) (PBPSu) random copolyesters were synthesized and characterized using 1HNMR spectroscopy and viscometry. Tensile properties decreased with increasing propylene succinate (PSu) content. Cocrystallization and multiple melting behaviors were investigated. The copolymers showed a eutectic behavior. The minimum melting point corresponded to 75 mol % PSu. Wide-angle X-ray diffraction (WAXD) patterns showed that the copolymers with up to 60 mol % PSu units formed poly(butylene succinate) crystals. The interplanar spacings slightly differentiated. The copolymer with 11.5 mol % poly(propylene succinate) (PPSu) units formed PPSu crystals. The results indicated isodimorphic cocrystallization. The cocrystallization was thermodynamically analyzed using the Wendling-Suter model. The defect free energy decreased for copolymers with high PPSu content. The banded spherulites of the copolyesters were studied, and growth rates were analyzed using the Lauritzen-Hoffman theory. Enzymatic hydrolysis study, using Rhizopus delemar and Pseudomonas cepacia lipases, showed that degradation was faster for copolymers with high PSu content, compared even to the fast-degrading PPSu.     

Study on drug release behaviors of poly-alpha,beta-[n-(2-hydroxyethyl)-L-aspartamide]-g-poly(epsilon-caprolactone) nano- and microparticles

Biodegradable amphiphilic graft copolymers poly-alpha,beta-[N-(2-hydroxyethyl)-L-aspartamide]-g-poly(epsilon-caprolactone) (PHEA-g-PCL) with different branch lengths were synthesized through the ring-opening polymerization of epsilon-caprolactone initiated by the macroinitiator PHEA bearing hydroxyl groups. With use of the graft copolymers with different compositions, nanoparticle drug delivery systems with sizes smaller than 100 nm were prepared by a dialysis method, and microparticle drug delivery systems with sizes smaller than 5 microm were fabricated by a melting-emulsion method. The regularly spherical shapes of the drug-loaded nano- and microparticles were verified by transmission electron microscopy and scanning electron microscopy. In vitro drug release properties of nano- and microparticle drug delivery systems were investigated, with the emphasis on the effects of polymer composition, particle size, and drug-loading content on the release behaviors.     

Degradation behavior of poly(epsilon-caprolactone)-b-poly(ethylene glycol)-b-poly(epsilon-caprolactone) micelles in aqueous solution

Poly(epsilon-caprolactone)-b-poly(ethylene glycol)-b-poly(epsilon-caprolactone) triblock copolymers were synthesized by the ring-opening polymerization of epsilon-caprolactone in the presence of hydroxyl-terminated poly(ethylene glycol) with different molecular weights, using stannous octoate catalyst. Micelles prepared by the precipitation method with these triblock copolymers exhibit a core-shell structure. The degradation behaviors of these core-shell micelles in aqueous solution were investigated by FT-IR, 1H NMR, GPC, DLS, TEM, and AFM. It was found that the degradation behavior of micelles in aqueous solution was quite different from that of bulk materials. The size of the micelles increased in the initial degradation stages and decreased gradually when the degradation period was extended. The caprolactone/ethylene oxide (CL/EO) ratio in micelles measured by NMR also shows an increase at the initial degradation stage and a decrease at later stages. The morphology of these micelles became more and more irregular during the degradation period. We explain the observed behavior by a two-stage degradation mechanism with interfacial erosion between the cores and the shells followed by core erosion.     

Living ring-opening polymerization of a carbohydrate-derived lactone for the synthesis of protein-resistant biomaterials

An efficient living ring-opening polymerization (ROP) of a permethoxylated epsilon-caprolactone [(OMe)CL] catalyzed by yttrium(III) isopropoxide was developed for the synthesis of degradable protein-resistant polymers [P(OMe)CL]. The lactone monomer was efficiently prepared from a reduced sugar, D-dulcitol. Kinetic studies of the ROP revealed a linear dependence of ln[M]0/[M] on polymerization time as well as a linear correlation between the number-averaged molecular weight (M(n)) and monomer conversion; both support it is a living polymerization. A series of block copolymers of our permethoxylated lactone with epsilon-caprolactone [P(OMe)CL-b-PCL] were synthesized and fully characterized. In thermal analyses only single T(g)s were observed in all the block copolymers, suggesting that P(OMe)CL and PCL blocks are fully miscible. Finally, surface plasmon resonance (SPR) sensograms demonstrated that both P(OMe)CL and the P(OMe)CL-b-PCL block copolymers exhibit excellent resistance to fibrinogen and lysozyme.     

Synthesis and characterization of PCL-b-PEO-b-PCL-based nanostructured and porous hydrogels

Hydrogels with nanoscale structure were synthesized using amphiphilic poly(epsilon-caprolactone)-poly(ethylene oxide)-poly(epsilon-caprolactone) (PCL-b-PEO-b-PCL) triblock copolymers. Small-angle X-ray scattering (SAXS) studies show that the block copolymers form 30-40 nm structures in aqueous solution and that these patterns are retained, with some increase in length scale, following electron beam cross-linking. Lamellar nanostructures were observed by SAXS and atomic force microscopy (AFM), with SAXS indicating cylindrical structure as the block lengths become more different in length. It is demonstrated through Fourier transform infrared spectroscopy (FTIR), mass loss, and differential scanning calorimetry (DSC) that the PCL can be completely removed by hydrolysis in NaOH(aq) to form porous PEO hydrogels. These hydrogels retain active functional groups following PCL removal that serve as sites for further chemical modification.     

Synthesis, characterization, and degradation behavior of amphiphilic poly-alpha,beta-[N-(2-hydroxyethyl)-L-aspartamide]-g-poly(epsilon-caprolactone)

A series of biodegradable amphiphilic graft polymers were successfully synthesized by grafting poly(epsilon-caprolactone) (PCL) sequences onto a water-soluble poly-alpha,beta-[N-(2-hydroxyethyl)-L-aspartamide] (PHEA) backbone. The graft copolymers were prepared through the ring-opening polymerization of epsilon-caprolactone (CL) initiated by the macroinitiator PHEA with pendant hydroxyl groups without adding any catalyst. By controlling the feed ratio of the macroinitiator to the monomer, the copolymers with different branch lengths and properties can be obtained. The successful grafting of PCL sequences onto the PHEA backbone was verified by FTIR, 1H NMR, and combined size-exclusion chromatography and multiangle laser light scattering (SEC-MALLS) analysis. The hydrolytic degradation and enzymatic degradation of these graft copolymers were investigated. The results show the hydrolytic degradation rate increases with increasing content of hydrophilic PHEA backbone. While the enzymatic degradation rate is affected by two competitive factors, the catalytic effect of Pseudomonas cepacia lipase on the degradation of PCL branches and the hydrophilicity which depends on the copolymer composition. In situ observation of the degradation under polarizing light microscope (PLM) demonstrates the different degradation rates of different regions in the polymer samples.     

Cocrystallization of random copolymers of omega-pentadecalactone and epsilon-caprolactone synthesized by lipase catalysis

Random copolymers were prepared by Candida antarctica lipase B (Novozyme-435) catalyzed copolymerization of omega-pentadecalactone (PDL) with epsilon-caprolactone (CL). Over the whole composition range PDL-CL copolymers are highly crystalline (melting enthalpy by differential scanning calorimetry, above 100 J/g; crystallinity degree by wide-angle X-ray scattering, WAXS, 60-70%). The copolymers melt at temperatures that linearly decrease with composition from that of poly(omega-pentadecalactone) (PPDL; 97 degrees C) to that of poly(epsilon-caprolactone) (PCL; 59 degrees C). The WAXS profiles of PCL and PPDL homopolymers are very similar, except for the presence in PPDL of the (001) reflection at 2theta = 4.58 degrees that corresponds to a 19.3 angstroms periodicity in the chain direction. In PDL-CL copolymers the intensity of this reflection decreases with increasing content of CL units and vanishes at 50 mol % CL, as a result of randomization of the ester group alignment and loss of chain periodicity. PDL-CL copolymers crystallize in a lattice that gradually changes from that of one homopolymer to that of the other, owing to comonomer isomorphous substitution. Cocrystallization of comonomer units is also shown by a random PDL-CL copolymer obtained in a polymerization/transesterification reaction catalyzed by C. antarctica lipase B (Novozyme-435) starting from preformed PCL and PDL monomer.     

Poly(ether-ester) conjugates with enhanced degradation

When a linear or a four arm star-shaped polyglycidol is used as macroinitiator, densely grafted poly(glycidol-graft-epsilon-caprolactone) and poly(glycidol-graft-L-lactide) and loosely grafted poly[(glycidol-graft-epsilon-caprolactone)-co-glycidol] copolymers have been synthesized by chemical or, in the latter case, by enzymatic catalyzed ring-opening polymerization of epsilon-caprolactone and L-lactide. The well-defined copolymers possess similar molecular weights, but differ in their architecture, microstructure and chemical composition. The hydrolytic degradation behavior was studied in a phosphate buffer solution at pH 7.4 and 37 degrees C for up to 90 days. After different time periods, the mass loss was determined and the degraded copolymers were analyzed by means of NMR, size exclusion chromatography, and scanning electron microscopy. Compared to linear poly(epsilon-caprolactone), poly[(glycidol-graft-epsilon-caprolactone)-co-glycidol] shows a change of the degradation mechanism and a tremendous enhancement of polymer degradation. As this effect is attributed to the high concentration of hydroxy groups at the polyglycidol backbone, this work points out a new possibility to tailor the degradation profiles of polyesters by the introduction of functionality into the polymeric material.     

Monohydroxylated poly(3-hydroxyoctanoate) oligomers and its functionalized derivatives used as macroinitiators in the synthesis of degradable diblock copolyesters

The presence of a hydroxyl group at the end of poly(3-hydroxyoctanoate) oligomers, noted PHO oligomers, is required to prepare diblock copolymers with improved properties by ring-opening polymerization of cyclic monomer as epsilon-caprolactone. Several chemical methods such as basic hydrolysis, acid-catalyzed reaction with APTS, and methanolysis were used to prepare well-defined low molar masses PHO oligomers. The methanolysis reaction was allowed to proceed for 10-60 min to produce PHO oligomers with Mn values ranging from 20,000 to 800 g mol-1 with low polydispersity index. Detailed analysis of the MALDI-TOF mass spectra of the obtained oligomers has revealed the presence of linear structures bearing methyl ester on one side and hydroxyl end group on the other side. The same procedure was applied to poly(3-hydroxyoctanoate-co-3-hydroxyundecenoate), PHOU, a poly(3-hydroxyalkanoate) containing unsaturated units in its side chains. These oligomers were further used to initiate the polymerization of epsilon-caprolactone by varying the PHO (or PHOU) and PCL lengths. By copolymerization with epsilon-caprolactone, the properties of PHO or PHOU have been improved. The crystallinity of the obtained copolymers was modified by controlling the length of the two different blocks. The unsaturations in the side chains of the PHOU block were oxidized in acid carboxylic functions to obtain a novel artificial biopolyester. Moreover, degradation was followed to study the influence of carboxylic groups on the hydrolysis of the copolymers.     

Biosynthesis of PHB tercopolymer by Bacillus cereus UW85

AIMS: The study was attempted to determine the ability of a Gram-positive Bacillus cereus UW85 strain to biosynthesize poly (3-hydroxybutyrate) copolymers when epsilon-caprolactone, or epsilon-caprolactone and glucose, were used as carbon sources. METHODS AND RESULTS: Bacillus cereus was grown for 24 h under nitrogen-limited conditions in a mineral salts medium. Growth was monitored by measurement of turbidity. Glucose level was determined by the colorimetric anthrone METHOD: The epsilon-caprolactone concentration was determined by gas chromatography. The bacterial biopolymers were extracted with chloroform in a Soxhlet extractor and then characterized by nuclear magnetic resonance and gel permeation chromatography. When epsilon-caprolactone was used as a carbon substrate, the bacterial strain produced tercopolymer with 3-hydroxybutyrate, 3-hydroxyvalerate and 6-hydroxyhexanoate units. However, when caprolactone and glucose were supplied together, only homopolymer of poly (3-hydroxybutyrate) was produced. CONCLUSION: All tercopolymers isolated from B. cereus UW85 cells were obtained with yields up to 9% (w/w) and low number-average molecular weight compared with the homopolymer PHB. SIGNIFICANCE AND IMPACT OF THE STUDY: Bacillus cereus UW85 produced tercopolymer with a low molecular weight from one substrate (epsilon-caprolactone) used as a carbon source. The results are significant for the potential future application of Bacillus biopolymers to bioplastics production.     

Polylactones 57. Biodegradable networks based on A-B-A triblock segments containing poly(ethylene glycol)s-syntheses and drug release properties

Condensation of Bu(2)Sn(OMe)(2) with poly(ethylene glycol)s yielded macrocyclic tin alkoxides which were, in turn, used as cyclic initiators for the ring-expansion polymerization of epsilon-caprolactone, D,L-lactide, or trimethylene carbonate. The resulting cyclic triblock copolymers were in situ cross-linked with trimesoyl chloride. The lengths of the A-B-A triblock segments were varied via the monomer-initiator ratio (M/I) or via the lengths of the poly(ethylene glycol)s. After extraction with CH(2)Cl(2), the isolated networks were characterized by (1)H NMR spectroscopy, DSC measurements, and swelling experiments. The release of dexamethasone and 5-fluorouracil from two triblock networks was studied in physiological buffer solutions at 37 degrees C over a period of several weeks. A strong initial burst was found in all cases. Only a weak initial burst and a more continuous release was observed when networks of random L-lactide/epsilon-caprolactone copolymers were studied under the same conditions.     

Synthesis and characterization of the biodegradable polycaprolactone-graft-chitosan amphiphilic copolymers

A novel synthetic approach to biodegradable amphiphilic copolymers based on poly (epsilon-caprolactone) (PCL) and chitosan was presented, and the prepared copolymers were used to prepare nanoparticles successfully. The PCL-graft-chitosan copolymers were synthesized by coupling the hydroxyl end-groups on preformed PCL chains and the amino groups present on 6-O-triphenylmethyl chitosan and by removing the protective 6-O-triphenylmethyl groups in acidic aqueous solution. The PCL content in the copolymers can be controlled in the range of 10-90 wt %. The graft copolymers were thoroughly characterized by 1H NMR, 13C NMR, FT-IR and DSC. The nanoparticles made from the graft copolymers were investigated by 1H NMR, DLS, AFM and SEM measurements. It was found that the copolymers could form spherical or elliptic nanoparticles in water. The amount of available primary amines on the surface of the prepared nanoparticles was evaluated by ninhydrin assay, and it can be controlled by the grafting degree of PCL.     

Sequence distribution in microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) co-polyesters determined by NMR and MS

The microstructure of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolyesters (PHBV) as well as a mixture of two PHBV copolyesters of different comonomer composition and sequence distribution was studied by 13C NMR based on dyad and triad analysis and multistage electrospray ionization mass spectrometry (ESI-MSn). Both techniques gave results that were in good agreement for all investigated samples. The effect of microstructure on PHBV thermal properties was investigated from the melting behavior of samples. A PHBV copolyester with randomly distributed hydroxyvalerate units (12.0 mol % HV) showed a single melting peak, whereas samples with nonrandom composition distribution showed multiple melting peaks in their thermograms. Such complex melting behavior suggested that the 12.9 and 27.1 mol % PHBV copolyesters were actually blends of several copolymers with widely different comonomer-unit composition.