Introduction of a disulfide bridge enhances the thermostability of a <Emphasis Type="Italic">Streptomyces olivaceoviridis</Emphasis> xylanase mutant

Substitution of the N-terminus of Streptomyces olivaceoviridis xylanase XYNB to generate mutant TB has been previously shown to increase the thermostability of the enzyme. To further improve the stability of this mutant, we introduced a disulfide bridge (C109–C153) into the TB mutant, generating TS. To assess the effect of the disulfide bridge in the wild-type enzyme, the S109C-N153C mutation was also introduced into XYNB, resulting in XS. The mutants were expressed in Pichia pastoris, the recombinant enzymes were purified, and the effect of temperature and pH on enzymatic activity was characterized. Introduction of the disulfide bridge (C109–C153) into XYNB (XS variant) and TB (TS variant) increased the thermostability up to 2.8-fold and 12.4-fold, respectively, relative to XYNB, after incubation at 70°C, pH 6.0, for 20 min. In addition, a synergistic effect of the disulfide bridge and the N-terminus replacement was observed, which extended the half-life of XYNB from 3 to 150 min. Moreover, XS and TS displayed better resistance to acidic conditions compared with the respective enzymes that did not contain a disulfide bridge.     

An alkali-tolerant xylanase produced by the newly isolated alkaliphilic <Emphasis Type="Italic">Bacillus pumilus</Emphasis> from paper mill effluent

An alkaline active xylanase, XynBYG, was purified from an alkaliphilic Bacillus pumilus BYG, which was newly isolated from paper mill effluent. It had an optimum pH of 8.0–9.0, and showed good stability after incubated at pH 9.0 for 120 min. The optimum temperature for the activity was 50°C, and the enzyme retained below 55% of its original activity for 30 min at 55°C. The gene coding for XynBYG consists of 687 bp and encodes 229 amino acids. Similarity analysis indicated that XynBYG belong to family 11 glycosyl hydrolases. Site-directed mutagenesis was performed to replace five sites (Tyr/Ser) to Arg/Glu and the results demonstrated that the optimum temperature of the mutant Y7 (S39R-T146E) increased 5°C and the half-life of inactivation (T1/2) at 60 and 65°C was 1 h and 25 min, respectively. Thus, it provides a potential xylanase that can meet the harsh conditions in the industrial applications.     

木聚糖酶XYNB分子中折叠股B1和B2间的疏水作用对酶热稳定性的影响

对来源于Streptomycesolivaceoviridis的高比活木聚糖酶XYNB进行同源建模,并结合嗜热木聚糖酶氮末端芳香族氨基酸疏水作用的结构分析,设计了XYNB的T11Y定点突变,观察XYNB分子中折叠股B1和B2的疏水作用对酶的热稳定性的影响。将突变酶XYNB′在毕赤酵母中表达,表达的XYNB′经纯化后与原酶XYNB(同样经毕赤酵母表达后纯化)进行酶学性质比较,结果表明,XYNB′的耐热性比XYNB有明显的提高,但最适温度与原酶一样为60℃。另外,XYNB′的最适pH、Km值及比活性均有一定的改变。实验证实了木聚糖酶XYNB的氮端芳香族氨基酸之间的疏水相互作用与其热稳定性相关,为进一步的结构与功能研究提供了优良的基因材料。     

Characterization of a thermostable xylanase from an alkaliphilic Bacillus sp.

A xylanase gene (xyn10) from alkaliphilic Bacillus sp. N16-5 was cloned and expressed in Pichia pastoris. The deduced amino acid sequence has 85% identity with xylanase xyn10A from B. halodurans and contains two potential N-glycosylation sites. The glycosylated Xyn10 with MW 48 kDa can hydrolyze birchwood and oatspelt xylan. The enzyme had optimum activity at pH 7 and 70°C, with the specific activity of 92.5U/mg. The Xyn10 retained over 90% residual activity at 60°C for 30 min but lost all activity at 80°C over 15 min. Most tested ions showed no or slight inhibition effects on enzyme activity.     

Characterization of the novel xylanase from the thermophilic Geobacillus thermodenitrificans JK1

Thermophilic strain JK1 was isolated from compost using xylan as a single carbon source. On the basis of 16S rRNA gene phylogenetic analysis and spo0A gene sequence similarity analysis, strain JK1 was identified as Geobacillus thermodenitrificans strain. During the exponential culture growth, the strain JK1 was found to produce the single xylan degrading enzyme ??45 kDa in size. Xylose was not an inducer of this xylanase. Cloning, expression and characterization of the recombinant xylanase were performed. Xylanase of G. thermodenitrificans JK1 was cellulase-free; pH and temperature optimums were found to be 6.0 and 70°C, respectively. The metal ions Na⁺, K⁺, Ca²⁺, and Co²⁺ showed partial inhibition of the activity, while Mn²⁺ had slight stimulating effect on the enzymatic activity. Recombinant xylanase was thermostable over the temperature range of 55?C70°C. It presented the highest stability after incubation at 55°C for 60 min showing 84% residual activity. 50% residual activity was revealed after incubation at 60°C for 60 min as well as at 65 and 70°C for 30 min. Results of the thermostability experiments showed xylanase of JK1 having quite low thermostability when compared with the respective enzymes of the other geobacilli.     

Production of a high level of cellulase-free xylanase by the thermophilic fungus Thermomyces lanuginosus in laboratory and pilot scales using lignocellulosic materials

Thermomyces lanuginosus, isolated from self-heated jute stacks in Bangladesh, was able to produce a very high level of cellulase-free xylanase in shake cultures using inexpensive lignocellulosic biomass. Of the nine lignocellulosic substrates tested, corn cobs were found to be the best inducer of xylanase activity. The laboratory results of xylanase production have been successfully scaled up to VABIO (Voest-Alpine Biomass Technology Center) scale using a 15-m³ fermentor for industrial production and application of xylanase. In addition, some properties of the enzyme in crude culture filtrate produced on corn cobs are presented. The enzyme exhibited very satisfactory storage stability at 4–30°C either as crude culture filtrate or as spray- or freeze-dried powder. The crude enzyme was active over a broad range of pH and had activity optima at pH 6.5 and 70–75°C. The enzyme was almost thermostable (91–92%) at pH 6.5 and 9.0 after 41 h preincubation at 55°C and lost only 20–33% activity after 188 h. In contrast, it was much less thermostable at pH 5.0 and 11.0. Xylanases produced on different lignocellulosic substrates exhibited differences in thermostability at 55°C and pH 6.5. Correspondence to: J. Gomes     

Thermostable carbohydrate binding module increases the thermostability and substrate-binding capacity of Trichoderma reesei xylanase 2

To improve the thermostability of Trichoderma reesei xylanase 2 (Xyn2), the thermostabilizing domain (A2) from Thermotoga maritima XynA were engineered into the N-terminal region of the Xyn2 protein. The xyn2 and hybrid genes were successfully expressed in Pichia pastoris using the strong methanol inducible alcohol oxidase 1 (AOX1) promoter and the secretion signal sequence from S. cerevisiae (α-factor). The transformants expressed the hybrid gene produced clearly increased both the thermostability and substrate-binding capacity compared to the corresponding strains expressed the native Xyn2 gene. The activity of the hybrid enzyme was highest at 65 °C that was 10 °C higher than the native Xyn2. The hybrid enzyme was stable at 60 °C and retained more than 85% of its activity after 30-min incubation at this temperature. The hybrid enzyme was highly specific toward xylan and analysis of the products from birchwood xylan degradation confirmed that the enzyme was an endo-xylanase with xylobiose and xylotriose as the main degradation products. These attributes should make it an attractive applicant for various applications. Our results also suggested that the N-terminal domain A2 is responsible for both the thermostability and substrate-binding capacity of T. maritima XynA.     

Purification and characterization of an endoxylanase from the culture broth of <Emphasis Type="Italic">Bacillus cereus</Emphasis> BSA1

An extracellular xylanase from the fermented broth of Bacillus cereus BSA1 was purified and characterized. The enzyme was purified to 3.43 fold through ammonium sulphate precipitation, DEAE cellulose chromatography and followed by gel filtration through Sephadex-G-100 column. The molecular mass of the purified xylanse was about 33 kDa. The enzyme was an endoxylanase as it initially degraded xylan to xylooligomers. The purified enzyme showed optimum activity at 55°C and at pH 7.0 and remained reasonably stable in a wide range of pH (5.0–8.0) and temperature (40–65°C). The K _m and V _max values were found to be 8.2 mg/ml and 181.8 μmol/(min mg), respectively. The enzyme had no apparent requirement of cofactors, and its activity was strongly inhibited by Cu²⁺, Hg²⁺. It was also a salt tolerant enzyme and stable upto 2.5 M of NaCl and retained its 85% activity at 3.0 M. For stability and substrate binding, the enzyme needed hydrophobic interaction that revealed when most surfactants inhibited xylanase activity. Since the enzyme was active over wide range of pH, temperature and remained active in higher salt concentration, it could find potential uses in biobleaching process in paper industries.     

通过N端替换提高木聚糖酶的热稳定性

以来源于Thermomonospora fusca的耐高温木聚糖酶TfxA和来源于Streptomycesolivaceoviridis的高比活木聚糖酶XYNB为亲本,构建出耐热高比活融合木聚糖酶TB,将TB在大肠杆菌BL21和毕赤酵母GS115中进行表达并对表达产物的酶学性质进行分析比较。分析表明,融合蛋白TB最适pH值为6.0,最适温度为70℃,较XYNB有大幅度的提高;在热稳定性方面,TB明显优于XYNB,将两种稀释好的酶液分别在80℃和90℃下热处理3min,TB的热稳定性较XYNB提高了6倍左右;TB的pH稳定性为5～9(相对剩余活性在50%以上的pH范围),较XYNB有所下降,但两者的比活性基本不变,保持了亲本XYNB的高比活性。通过同源建模和序列比较,分析了可能影响融合蛋白TB酶学性质的因素,为进一步研究木聚糖酶的结构与功能提供了新的思路。     

Production of a novel glycerol-inducible lipase from thermophilic <Emphasis Type="Italic">Geobacillus stearothermophilus</Emphasis> strain-5

In a screening program for isolation of thermophilic lipase-producing bacteria, a number of thermophilic bacteria were isolated from desert soil from Baltim, Egypt. Among 55 isolates, a potent bacterial candidate (starin-5) was characterized and identified by biochemical and PCR techniques, based on 16S rRNA sequencing. Phylogenetic analysis revealed its closeness to geobacilli especially the thermophilic Geobacillus stearothermophilus with optimal growth and lipolytic enzyme activity at 60°C and pH 7.0. An inducible nature of lipolytic enzyme synthesis using glycerol and glucose was demonstrated. Approximately, 94–100% of the original activity was retained due to thermal stability of the crude enzyme after heat treatment for 15 min at 30–60°C. The enzyme retained 84.84% of its original activity during incubation at 70°C (pH 8.0) for 15 min. Lipase enzyme from G. stearothermophilus strain-5 was immobilized on various carriers and the most suitable carrier was chitin that showed 73.03% of activity yield.     

Production and optimization of cellulase-free, alkali-stable xylanase by Bacillus pumilus SV-85S in submerged fermentation

This paper reports the production of a cellulase-free and alkali-stable xylanase in high titre from a newly isolated Bacillus pumilus SV-85S using cheap and easily available agro-residue wheat bran. Optimization of fermentation conditions enhanced the enzyme production to 2995.20 ± 200.00 IU/ml, which was 9.91-fold higher than the activity under unoptimized basal medium (302.2 IU/ml). Statistical optimization using response-surface methodology was employed to obtain a cumulative effect of peptone, yeast extract, and potassium nitrate (KNO₃) on enzyme production. A 2³ central composite design best optimized the nitrogen source at the 0 level for peptone and yeast extract and at the −α level for KNO₃, along with 5.38-fold increase in xylanase activity. Addition of 0.1% tween 80 to the medium increased production by 1.5-fold. Optimum pH for xylanase was 6.0. The enzyme was 100% stable over the pH range from 5 to 11 for 1 h at 37°C and it lost no activity, even after 3 h of incubation at pH 7, 8, and 9. Optimum temperature for the enzyme was 50°C, but the enzyme displayed 78% residual activity even at 65°C. The enzyme retained 50% activity after an incubation of 1 h at 60°C. Characteristics of B. pumilus SV-85S xylanase, including its cellulase-free nature, stability in alkali over a long duration, along with high-level production, are particularly suited to the paper and pulp industry.     

Production and biochemical characterization of a novel cellulase-poor alkali-thermo-tolerant xylanase from <Emphasis Type="Italic">Coprinellus disseminatus</Emphasis> SW-1 NTCC 1165

Fungi producing xylanases are plentiful but alkali-thermo-tolerant fungi producing cellulase-poor xylanase are rare. Out of 12 fungal strains isolated from various sources, Coprinellus disseminatus SW-1 NTCC 1165 yielded the highest xylanase activity (362.1 IU/ml) with minimal cellulase contamination (0.64 IU/ml). The solid state fermentation was more effective yielding 88.59% higher xylanase activity than that of submerged fermentation. An incubation period of 7 days at 37°C and pH 6.4 accelerated the xylanase production up to the maximum level. Among various inexpensive agro-residues used as carbon source, wheat bran induced the maximum xylanase titres (469.45 IU/ml) while soya bean meal was the best nitrogen source (478.5 IU/ml). A solid substrate to moisture content ratio of 1:3 was suitable for xylanase production while xylanase titre was repressed with the addition of glucose and lactose. The xylanase and laccase activities under optimized conditions were 499.60 and 25.5 IU/ml, respectively along with negligible cellulase contamination (0.86 IU/ml). Biochemical characterization revealed that optimal xylanase activity was observed at pH 6.4 and temperature 55°C and xylanase is active up to pH 9 (40.33 IU/ml) and temperature 85°C (48.81 IU/ml). SDS–PAGE and zymogram analysis indicated that molecular weight of alkali-thermo-tolerant xylanase produced by C. disseminatus SW-1 NTCC 1165 was 43 kDa.     

Effect of process parameters on 3-hydroxypropionic acid production from glycerol using a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

The stability and specific activity of endo-β-1,4-glucanase III from Trichoderma reesei QM9414 was enhanced, and the expression efficiency of its encoding gene, egl3, was optimized by directed evolution using error-prone PCR and activity screening in Escherichia coli RosettaBlue (DE3) pLacI as a host. Relationship between increase in yield of active enzyme in the clones and improvement in its stability was observed among the mutants obtained in the present study. The clone harboring the best mutant 2R4 (G41E/T110P/K173M/Y195F/P201S/N218I) selected in via second-round mutagenesis after optimal recombinating of first-round mutations produced 130-fold higher amount of mutant enzyme than the transformant with wild-type EG III. Mutant 2R4 produced by the clone showed broad pH stability (4.4–8.8) and thermotolerance (entirely active at 55°C for 30 min) compared with those of the wild-type EG III (pH stability, 4.4–5.2; thermostability, inactive at 55°C for 30 min). k _cat of 2R4 against carboxymethyl-cellulose was about 1.4-fold higher than that of the wild type, though the K _m became twice of that of the wild type.     

Immobilization of Xylan-Degrading Enzymes from Scytalidium thermophilum on Eudragit L-100

Summary Xylanase from Scytalidium thermophilum was immobilized on Eudragit L-100, a pH sensitive copolymer of methacrylic acid and methyl methacrylate. The enzyme was non-covalently immobilized and the system expressed 70% xylanase activity. The immobilized preparation had broader optimum temperature of activity between 55 and 65 °C as compared to 65 °C in case of free enzyme and broader optimum pH between 6.0 and 7.0 as compared to 6.5 in case of free enzyme. Immobilization increased the t_1/2 of enzyme at 60 °C from 15 to 30 min with a stabilization factor of 2. The K_m and V_max values for the immobilized and free xylanase were 0.5% xylan and 0.89 μmol/ml/min and 0.35% xylan and 1.01 μmol/ml/min respectively. An Arrhenius plot showed an increased value of activation energy for immobilized xylanase (227 kcal/mol) as compared to free xylanase (210 kcal/mol) confirming the higher temperature stability of the free enzyme. Enzymatic saccharification of xylan was also improved by xylanase immobilization.     

Obtaining a mutant of Bacillus amyloliquefaciens xylanase A with improved catalytic activity by directed evolution

This study aimed to obtain xylanase exhibiting improved enzyme properties to satisfy the requirements for industrial applications. The baxA gene encoding Bacillus amyloliquefaciens xylanase A was mutated by error-prone touchdown PCR. The mutant, pCbaxA50, was screened from the mutant library by using the 96-well plate high-throughput screening method. Sequence alignment revealed the identical mutation point S138T in xylanase (reBaxA50) produced by the pCbaxA50. The specific activity of the purified reBaxA50 was 9.38 U/mg, which was 3.5 times higher than that of its parent expressed in Escherichia coli BL21 (DE3), named reBaxA. The optimum temperature of reBaxA and reBaxA50 were 55 °C and 50 °C, respectively. The optimum pH of reBaxA and reBaxA50 were pH 6 and pH 5, respectively. Moreover, reBaxA50 was more stable than reBaxA under thermal and extreme pH treatment. The half-life at 60 °C and apparent melting temperature of reBaxA50 were 9.74 min and 89.15 °C, respectively. High-performance liquid chromatography showed that reBaxA50 released xylooligosaccharides from oat spelt, birchwood, and beechwood xylans, with xylotriose as the major product; beechwood xylan was also the most thoroughly hydrolyzed. This study demonstrated that the S138T mutation possibly improved the catalytic activity and thermostability of reBaxA50.     

Engineering a high-performance,metagenomic-derived novel xylanase with improved soluble protein yield and thermostability

The novel termite gut metagenomic-derived GH11 xylanase gene xyl7 was expressed in Escherichia coli BL21, and the purified XYL7 enzyme exhibited high specific activity (6340 U/mg) and broad pH active range of 5.5–10.0. Directed evolution was employed to enhance the thermostability of XYL7; two mutants (XYL7-TC and XYL7-TS) showed a 250-fold increase in half-life at 55 °C, with a 10 °C increase in optimal temperature compared to that of wild-type XYL7. A truncated enzyme (XYL7-Tr3) acquired by protein engineering showed similar catalytic properties as the wild-type, with a tenfold increase in soluble protein yield by the mutant. The reducing sugar produced by XYL7-TC was about fourfold greater than that produced by their parents when incubated with xylan at 60 °C for 4 h. The engineered novel xylanase exhibited superior enzymatic performance and showed promise as an excellent candidate for industrial application due to its high specific activity, stability and soluble protein yield.     

Immobilization of chitosan-modified invertase on alginate-coated chitin support via polyelectrolyte complex formation

Saccharomyces cerevisiae invertase was chemically modified with chitosan and further immobilized on sodium alginate-coated chitin support. The yield of immobilized protein was determined as 85% and the enzyme retained 97% of the initial chitosan-invertase activity. The optimum temperature for invertase was increased by 10 °C and its thermostability was enhanced by about 9 °C after immobilization. The immobilized enzyme was stable against incubation in high ionic strength solutions and was four-fold more resistant to thermal treatment at 65 °C than the native counterpart. The biocatalyst prepared retained 80% of the original catalytic activity after 50 h under continuous operational regime in a packed bed reactor.     

A thermophilic and acid stable family-10 xylanase from the acidophilic fungus Bispora sp. MEY-1

A complete gene, xyl10C, encoding a thermophilic endo-1,4-β-xylanase (XYL10C), was cloned from the acidophilic fungus Bispora sp. MEY-1 and expressed in Pichia pastoris. XYL10C shares highest nucleotide and amino acid sequence identities of 57.3 and 49.7%, respectively, with a putative xylanase from Aspergillus fumigatus Af293 of glycoside hydrolase family 10. A high expression level in P. pastoris (73,400 U ml⁻¹) was achieved in a 3.7–l fermenter. The purified recombinant XYL10C was thermophilic, exhibiting maximum activity at 85°C, which is higher than that reported from any fungal xylanase. The enzyme was also highly thermostable, exhibiting ~100% of the initial activity after incubation at 80°C for 60 min and >87% of activity at 90°C for 10 min. The half lives of XYL10C at 80 and 85°C were approximately 45 and 3 h, respectively. It had two activity peaks at pH 3.0 and 4.5–5.0 (maximum), respectively, and was very acid stable, retaining more than 80% activity after incubation at pH 1.5−6.0 for 1 h. The enzyme was resistant to Co²⁺, Mn²⁺, Cr³⁺ and Ag⁺. The specific activity of XYL10C for oat spelt xylan was 18,831 U mg⁻¹. It also had wide substrate specificity and produced simple products (65.1% xylose, 25.0% xylobiose and 9.9% xylan polymer) from oat spelt xylan.     

Simultaneous purification and immobilization of soybean hull peroxidase with a dye attached to chitosan mini-spheres

Soybean hull peroxidase (EC 1.11.1.7, SBP) was simultaneously purified and immobilized by dye affinity chromatography with Reactive Blue 4 attached to chitosan mini-spheres. Under optimized conditions, 96% of SBP was adsorbed to the matrix. Under the most stringent condition, only 49% was desorbed, whereas 2 M NaCl failed to desorb a significant amount of SBP. This behaviour allowed proposing the dye matrix as a support to immobilize SBP from a crude extract. The pH of maximum activity shifted from 7 to 3–5. SBP gained thermostability after immobilization: after 5?h at 85?°C, the remaining activity was 54%, whereas that of the free enzyme was 31%. The optimum temperature for the immobilized SBP was 75?°C, whereas that of the free enzyme was 55?°C. After two months at 4?°C, the activity loss of the immobilized SBP was only 3%. Immobilized SBP removed 80% of 2-bromophenol from wastewater in 180?min and, after five cycles of use, the activity loss was only 12.8%.